Hi there my wife has an Sony Xperia X10 she has 2.1 but all of a sudden has issues connecting to the home wifi modem (my galaxy s connects fine)
it finds it and i enter the pass key but it then searches for IP address and fails?
This is very annoying for her, im sure it must be some sort of cache/data issue but thought i would ask you guys for any advice please
thanks alot
steve
sgw81 said:
Hi there my wife has an Sony Xperia X10 she has 2.1 but all of a sudden has issues connecting to the home wifi modem (my galaxy s connects fine)
it finds it and i enter the pass key but it then searches for IP address and fails?
This is very annoying for her, im sure it must be some sort of cache/data issue but thought i would ask you guys for any advice please
thanks alot
steve
Click to expand...
Click to collapse
Did you try Blade Wifi Fix?
My problem was slightly different. I was able to connect after 4 or 5 attempts. However, it would disconnect every 10 or 15 minutes. Also, there were times it simply couldn't find my wireless network...
After things got better...
Oh I'm rooted...
ok i have just rooted with Z4 root i will install that and let u know
thanks
steve
telmoabff said:
Did you try Blade Wifi Fix?
My problem was slightly different. I was able to connect after 4 or 5 attempts. However, it would disconnect every 10 or 15 minutes. Also, there were times it simply couldn't find my wireless network...
After things got better...
Oh I'm rooted...
Click to expand...
Click to collapse
Blade wifi fix doesnt work on UK Xperia x10! shame
Hey guys.
I love the tablet z untill today. I have connected a Bluetooth keyboard to the tablet. Every few min or so the WiFi connection drops while Bluetooth and the keyboard are connected. When Bluetooth is switched off there are no drop offs. Any ideas ? I switched off smart connect thinking it may be that?
I am not rooted in anyway (well not yet)
Sent from my SGP321 using Tapatalk HD
wow this is so disappointing... i've had the tablet for a week and am loving it, but had seen your post and just received my bluetooth keyboard in the mail (a motorola) and sure enough, wifi is like dead when it's connected... i don't think it actually dropped the wifi... it shows i have a signal with my wifi router, but nothing is loading at all...
anyone else noticing this issue?
I noticed this same thing today. I didn't notice this before my update to .370 (Wi-Fi only model); although I don't know if there is actually a correlation.
Sent from my SGP311 using xda premium
I may try cm 10.1 today I'll keep you all posted
Sent from my C6603 using Tapatalk 2
I am havig the same Issue. Using either a Bluetooth Keyboard, Mouse, or sixaixis Gamepad.
Is this just happening to some (broken) tablets or is everyone having this problem?
If someone is NOT having this issue using Bluetooth and Wifi at the same time, could they please post here, to confirm that this acctually can work properly?
This thread mentions the same problem for the tablet z but no solution either: http://forum.xda-developers.com/showthread.php?t=2339032
hello...
i'm sorry for my bad english!!
i've flashed ultimate rom v11 on my sony xperia sola, but i have a problem during charging, because the touch work very bad...
if i try to touch a point, but it take another point...
i can't use the smartphone during charging, i can't receive any call or write messages!!
i hope that anyone can help me..
bye bye!!
Sorry to say , it may be your electricity environment problem. I have the same issue but only at my workplace, it is fine at home.
it's poor earthing from either the charger or the plug socket/house electrics. my Android tablet does it because they cleverly forgot the earth point on the actual port on the unit when making it.
Sent from my AOSP 4.3 Xperia S via Tapatalk
Hi all,
while investigating how to build a car mount, I've been looking at threads on the net about disassembling the tablet S.
A few of these mention that there is a place to fit a 3G module to the motherboard. Wondering if anyone has tried this? I've seen second-hand modules for sale on ebay, wonder would it require some additional software to run one.
cheers for reading
redd .
on a side note, i bought this tablet, used, last week. im loving it! its a lovely thing, im most pleased.
You may able to add this via otg but you need a slot for sim card
Sony Tablet S cihazımdan Tapatalk kullanılarak gönderildi
Im not sure but you might need to flash a 3g-wifi rom as your current firmware is probably wifi only
However im not sure on the kernal side of things if there are any changes needed
hit thanks if I helped
sent from rooted xts thanks djrbliss and condi
Supported list (GA models. Says 4.2, but same for 4.4.4 iirc)
http://i.sbo2.com/page/GA Series Android 4.2 Manual_EN.html
You may need to change/add apn settings. Install this app to get to the settings: https://play.google.com/store/apps/details?id=diewland.settings.mobilenetworks&hl=en
I use this one: http://www.eonon.com/Others/Others/V0049.html (is cheaper on ebay)
Also make sure that the cable is connected firmly to the back of the headunit
Useful information:
http://forum.xda-developers.com/showpost.php?p=58854199&postcount=8715
Could someone direct me to where the support list is found? The top link doesn't work. Just wondering if there has been any additions.
I'd like to have 4g ideally, is this even possible with these units (I own a huifei)? Can pick up a huawei e3372 for £15 on eBay
Sent from my GT-I9505 using Tapatalk
Any tried and tested USB wifi dongle as sometimes my units WIFI doesnt turn on, I am hoping I can just add an external USB WIFI dongle to the OTG USB adapter and use that one that way ????
mikejclark said:
Could someone direct me to where the support list is found? The top link doesn't work. Just wondering if there has been any additions.
I'd like to have 4g ideally, is this even possible with these units (I own a huifei)? Can pick up a huawei e3372 for £15 on eBay
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I have a e3372, but I can't make it work..... not an expert either.... but when I plug it in nothing happens. But it works great in my pc
These two work well together on the Head Unit.
http://www.amazon.co.uk/gp/product/...ue&ref_=ox_sc_act_title_1&smid=A1WCLLO809O2M2
http://www.amazon.co.uk/gp/product/B00I4UQ0AC?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
I whait my unit tomorrow. Can anyone tell is only the listed usb 3g sticks working?
Στάλθηκε από το ONE A2003 μου χρησιμοποιώντας Tapatalk
Only what you see in this post as far as I can tell.....
maximosm said:
I whait my unit tomorrow. Can anyone tell is only the listed usb 3g sticks working?
Στάλθηκε από το ONE A2003 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
You can get other USB broadband modems working if you use the PPP Widget 2 app (https://play.google.com/store/apps/details?id=de.draisberghof.pppwidget2&hl=en). I found it to be pretty annoying though so I came up with an alternative solution.
I now use a TMobile Z915 mobile hotspot. I plan to install a switch to the battery so I can still use it when travelling, but I can otherwise leave it installed in the car and have it powered by the radio. When the car is turned off, it should kill the power to the hotspot. When power is restored it will power up and have instant wifi.
I'm tempted to try my 4G USB broadband modem again just to see if it works now that I've installed the Malaysk ROM. With my portable hotspot, everything is great except that the radio thinks it is always on wifi so it doesn't mind wasting data.
Hello,
I use the Huawei E1750 USB 3G dongle. I see it run not stable and do not know the reason. I usually used this dongle in PC before take it to my car.
Sometime, the HU did not recognizes the dongle, most of times, the problem happens when I start the engine from the HU running by battery's power.
I guess the power supply for the USB port is not enough.
My HU is Klyde MCTB-KLD. RK3066, 800 X 480, Malaysk newest 4.4.4 ROM
Is there someone met this issue before? Please kindly share your experience to help me solve this.
Thanks!
vuquan said:
Hello,
I use the Huawei E1750 USB 3G dongle. I see it run not stable and do not know the reason. I usually used this dongle in PC before take it to my car.
Sometime, the HU did not recognizes the dongle, most of times, the problem happens when I start the engine from the HU running by battery's power.
I guess the power supply for the USB port is not enough.
My HU is Klyde MCTB-KLD. RK3066, 800 X 480, Malaysk newest 4.4.4 ROM
Is there someone met this issue before? Please kindly share your experience to help me solve this.
Thanks!
Click to expand...
Click to collapse
I believe others have seen this same problem and used a powered USB hub. Good luck.
vuquan said:
Hello,
I use the Huawei E1750 USB 3G dongle. I see it run not stable and do not know the reason. I usually used this dongle in PC before take it to my car.
Sometime, the HU did not recognizes the dongle, most of times, the problem happens when I start the engine from the HU running by battery's power.
I guess the power supply for the USB port is not enough.
My HU is Klyde MCTB-KLD. RK3066, 800 X 480, Malaysk newest 4.4.4 ROM
Is there someone met this issue before? Please kindly share your experience to help me solve this.
Thanks!
Click to expand...
Click to collapse
Hi guys,
I am also using a HUAWEI E1750 in my Carjoying HU and had the same problems but maybe I found a solution.
At least the behavior of the dongle improved dramatically.
1. At first I updated the firmware to version 11.126.13.00.00.B418
2. I think this is the important point .... I disabled the CD-ROM and SD-CARD function on the dongle.
You can use for that the DC-Unlocker.
In the white window on the bottom I used this command
AT ^ SETPORT = "A1, A2; 1,2,3,7"
You can also check this website
https://www.imei-server.com/415-huawei-at-comands-for-3g-modems.html
der_marv said:
Hi guys,
I am also using a HUAWEI E1750 in my Carjoying HU and had the same problems but maybe I found a solution.
At least the behavior of the dongle improved dramatically.
1. At first I updated the firmware to version 11.126.13.00.00.B418
2. I think this is the important point .... I disabled the CD-ROM and SD-CARD function on the dongle.
You can use for that the DC-Unlocker.
In the white window on the bottom I used this command
AT ^ SETPORT = "A1, A2; 1,2,3,7"
You can also check this website
https://www.imei-server.com/415-huawei-at-comands-for-3g-modems.html
Click to expand...
Click to collapse
I have a Huawei E160 and unfortunately the AT ^ SETPORT command doesn't work on my dongle. In the past I've tried AT^U2DIAG=0 which stopped it from working with my HU - fixed by reset using AT^U2DIAG=276.
Based on the above advice, I'm now trying AT^U2DIAG=3. It works with the HU but time will tell if it has fixed the reliability issues. I'll update this when I know more.
For further info - http://www.3g-modem-wiki.com/page/Huawei+AT-commands
der_marv said:
Hi guys,
I am also using a HUAWEI E1750 in my Carjoying HU and had the same problems but maybe I found a solution.
At least the behavior of the dongle improved dramatically.
1. At first I updated the firmware to version 11.126.13.00.00.B418
2. I think this is the important point .... I disabled the CD-ROM and SD-CARD function on the dongle.
You can use for that the DC-Unlocker.
In the white window on the bottom I used this command
AT ^ SETPORT = "A1, A2; 1,2,3,7"
You can also check this website
https://www.imei-server.com/415-huawei-at-comands-for-3g-modems.html
Click to expand...
Click to collapse
Thank you!
I will try it and get back later
der_marv said:
Hi guys,
I am also using a HUAWEI E1750 in my Carjoying HU and had the same problems but maybe I found a solution.
At least the behavior of the dongle improved dramatically.
1. At first I updated the firmware to version 11.126.13.00.00.B418
2. I think this is the important point .... I disabled the CD-ROM and SD-CARD function on the dongle.
You can use for that the DC-Unlocker.
In the white window on the bottom I used this command
AT ^ SETPORT = "A1, A2; 1,2,3,7"
You can also check this website
https://www.imei-server.com/415-huawei-at-comands-for-3g-modems.html
Click to expand...
Click to collapse
I tried and successed!
The AT-comand must follow this instruction from http://www.3g-modem-wiki.com/page/Huawei+AT-commands
The code for the "AT^U2DIAG=n" command depends on the model of dongle (Support by/Not support by)
The modem did fix quickly and more stable. But bases on the new firmware update feature: "More saving power" with your suggestion: "Disable CD and SD card reader", I think the main reason is the weak power of USB port. So, increase the USB power is more necessary because we may use any other device on it, not 3G modem only.
Thank you!
It hasn't completely fixed mine, the connection still drops out, but it MIGHT be better than before. Can't be sure though. Based on the above advice about firmware reducing power usage, I'll try that next.
This is for the benefit of anyone who owns a Huawei E160:
Do not install the latest firmware 11.609.10.02.432.b418.
After doing this, it wouldn't work with my HU at all. Unable to add APNs - they're not saved as the dongle is not recognised by the HU. It worked on my PC so wasn't broken, but the HU just didn't like it.
I downgraded to 11.609.06.02.94.B409 (was originally on 11.608.02.02.55 so is still an upgrade) and it now works once more.
I'm going to try out the different AT^U2DIAG commands to see if I can improve reliability.
dutchhome said:
I now use a TMobile Z915 mobile hotspot. I plan to install a switch to the battery so I can still use it when travelling, but I can otherwise leave it installed in the car and have it powered by the radio. When the car is turned off, it should kill the power to the hotspot. When power is restored it will power up and have instant wifi..
Click to expand...
Click to collapse
Can you explain this setup more? Maybe some pics? seems like maybe a better scenario than the USB dongle
Hey people,
I have a question. I have a 3g Stick Huawei E1750. It works very good, but I need 4G, because here at the most time only EDGE, and 4G is not supported by the stick. Does anyone knows a compatible working 4g STICK, not a Modem. Thanks
Jaihoidundso said:
Hey people,
I have a question. I have a 3g Stick Huawei E1750. It works very good, but I need 4G, because here at the most time only EDGE, and 4G is not supported by the stick. Does anyone knows a compatible working 4g STICK, not a Modem. Thanks
Click to expand...
Click to collapse
BUMP!