hello. i am on v20a europe rom stock and every time, with every os windows the flashing with lgup doesn't flash everymore. it says failed operation and reboot lgup. this happens with every rom i want flash in kdz, event v20b and v20c (both branded) but after 2 seconds and without rebooting phone. i installed driver and before nougat all went well. what can be? what can i do? thanks
i have h850
There is only stock v20a (refurbish), 20b and 20c are just upgrades. Did you tried Uppercut?
a special thanks to Loggsie. He hepled me step by step in private.
a thank to obol2 that was gentle to suggest me.
i solved with ver. 2 of dll
Related
Hi...
i want to know if is possible unbrick this phone. I've already tried:
- KDZ Flash (LG Flash Tool 2014), can't downlaod the lastest KDZ firmware for it because the page doesn't exist anymore, so i just dowloaded a previous version. Then when it start the upgrade procedure an error ocurred: "Upgrade stop due to an error"
- With the LG original mobile tool.
P.S. My phone was rooted before the brick.
Thanks!
undon3 said:
Hi...
i want to know if is possible unbrick this phone. I've already tried:
- KDZ Flash (LG Flash Tool 2014), can't downlaod the lastest KDZ firmware for it because the page doesn't exist anymore, so i just dowloaded a previous version. Then when it start the upgrade procedure an error ocurred: "Upgrade stop due to an error"
- With the LG original mobile tool.
P.S. My phone was rooted before the brick.
Thanks!
Click to expand...
Click to collapse
Have you downloaded the lg mobile united drivers, because without it the flash tool will not flash the firmware You can download the drivers from the following url
http://www.mediafire.com/download/g31hbcdmh14io89/LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe
And if you have missed some step you can see from the following url
http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii/general/method-unbricking-lg-l5ii-t3056008
Hello,
it seems that I bricked my H850.
All I can do at the moment is enter Download Mode, but LGUP crashes at the beginning everytime.
I can enter fastboot mode but I cant boot recovery, if that is possible I could flash a rom.
Can I flash manuelly a rom in the fastboot mode?
Dëmön said:
Hello,
it seems that I bricked my H850.
All I can do at the moment is enter Download Mode, but LGUP crashes at the beginning everytime.
I can enter fastboot mode but I cant boot recovery, if that is possible I could flash a rom.
Can I flash manuelly a rom in the fastboot mode?
Click to expand...
Click to collapse
Redownload KDZ file, make sure it's not corrupted*
Try on multiple PCs*
Try different versions of LGUP*
Right click on LGUP and run as administrator*
Sent from my LG G5 using XDA Labs
- I have tried different KDZ. 10c; 10e. Error is "primary gpt" at 10%.
- I have tried at 2 computers and old and new version of LGUP.
- LGUP starts only as administrator
Unfortunately you may need motherboard change.
Same thing happened to me and I had to send the phone for repair.
Fortunately I was covered by the warranty
Στάλθηκε από το LG-H850 μου χρησιμοποιώντας Tapatalk
Maybe try another dll file somebody extract dll from v10i and that whats help me with similar problem. But check upgrade in lgup not refurbish.
My Phone is working again.
LGUP and LGBridge both didnt want to flash the G5.
With fastboot I erased and formatted userdata, locked bootloader. I tried a lot of things that I dont know anymore.
Result is that LGUP stopped with the same error but LGBridge flashed 10i and now the phone works again.
Now LGUP works again and I can flash every KDZ, LGBridge is doing something different that it could flash the G5.
Dëmön said:
My Phone is working again.
LGUP and LGBridge both didnt want to flash the G5.
With fastboot I erased and formatted userdata, locked bootloader. I tried a lot of things that I dont know anymore.
Result is that LGUP stopped with the same error but LGBridge flashed 10i and now the phone works again.
Now LGUP works again and I can flash every KDZ, LGBridge is doing something different that it could flash the G5.
Click to expand...
Click to collapse
i have the same problem, my phone brick.
device boot only in donwload mode, lgup 10% error primary gpt.
how you solved? step by step please
Did you try to update your phone with LGBridge?
danielg90 said:
i have the same problem, my phone brick.
device boot only in donwload mode, lgup 10% error primary gpt.
how you solved? step by step please
Click to expand...
Click to collapse
Dude be sure to use original LG cable
danielg90 said:
i have the same problem, my phone brick.
device boot only in donwload mode, lgup 10% error primary gpt.
how you solved? step by step please
Click to expand...
Click to collapse
Sounds to me like wrong lgup it's tricky to find the right one, you need the LAB version.
Hello
6 mont ago I flashed a rom on my lg g2 - fulmics 5.1. For some strange reason I chose that my device was a D855 and so my D802 is now stock in a bootloop and pops up in lg flash tools as a D855.
As the device registers as a D855 the 'lg flash tool' will not flash a D802 rom. Fastboot mode is not an option any more, only 'download mode' is available.
What can I do?
I was thinking that if I could somehow get a recovery (twrp) for D855 installed, I could reflash with a D802 rom. Is this possible through download mode? If so, how to do it then?
Thanks in advance. I hope some of you can help, as I really like the phone.
https://goo.gl/photos/h9ux4ohZKAyzjGAn9
https://goo.gl/photos/51r6goug11R2voDx9
With a little from another thread:
maozer said:
Try using the .dll found at http://forum.xda-developers.com/attachment.php?attachmentid=2473543&d=1387955530
Just flash your phone like you normally would, except you use the .dll linked above instead. Apparently the DLL linked above is a general LG G2 DLL that works for all models.
Note: When I flashed my phone, LG FlashTool gave me an error at the end of the flash process, but the flash was still successful.
Click to expand...
Click to collapse
THANK YOU!
Hi guys I bricked my V30.
I just try root my V30 so i flash H930 kdz to V30.(partition DL)
and i try factory reset on h930 rom.
but i see kill switch , i'm panicked and i flash korean kdz to partition DL. i think it was my fault. in korea rom, i saw no command with android.
and I flash h930 kdz. then i can't get in download mode. i should have used an editor, and flash korean kdz to refurbish...
but i didn't .
I have to go customer center.
there's no way?
pulteki said:
Hi guys I bricked my V30.
I just try root my V30 so i flash H930 kdz to V30.(partition DL)
and i try factory reset on h930 rom.
but i see kill switch , i'm panicked and i flash korean kdz to partition DL. i think it was my fault. in korea rom, i saw no command with android.
and I flash h930 kdz. then i can't get in download mode. i should have used an editor, and flash korean kdz to refurbish...
but i didn't .
I have to go customer center.
there's no way?
Click to expand...
Click to collapse
if there is no screen then you might hard bricked the phone, if you can see the screen then you can still make it work,
go here
https://forum.xda-developers.com/showpost.php?p=76584629&postcount=193
and ask him he is master in LG
ChazzMatt
Thx. Now i can see killswitch logo and h930 boot logo, no killswitch logo with no command logo. And fastboot mode says enable usb debug.
Get the LG software for windows, connect your phone and you might be lucky and it will download and install the right KDZ. Saved me once with my G5.
I just solve the problem to using octoplus. Thanks.
Why V30 Can't Update Android9.0 (Boot Logo Freeze)
My V30 (V300L) Can't Update Android 9.0 ,
before i never Update 9.0 success, but i would downgrade Android 8.0 for Root .
and i can root on Android 8.0 success , but i can upgrade Android 9.0 Stock but V30 Boot Freeze (LG Logo)
I do any way, is fail Boot freeze
I do flashrom by LGUP (Refurbish , OTA , Partition DL ) Fail
I dont understand, why cant upgrade.
kdz 930 or 933 oreo. If booting in the above versions hear the boot sound, please continue to the kdz pie version of the machine
i can how to step.
Use Kdz(H930) above versions ?
and
USe Kdz(V300L) Pie Versions?
I have the same problem.
Me too and i looze my recovery and fastboot .....
Is it possible to recover my H930DS AUS or he died?
stradfred said:
Me too and i looze my recovery and fastboot .....
Is it possible to recover my H930DS AUS or he died?
Click to expand...
Click to collapse
If by "recovery" you mean TWRP, yes.
If you have unlocked bootloader and TWRP, unless you are flashing a TWRP flashable zip, then you need to flash full H930DS KDZ using Refurbish mode. Yes, you will lose TWRP recovery, but you can add it back with fastboot.
All H930 variants firmware (including H930DS) has fastboot. What have you flashed that doesn't have fastboot? Korean firmware does not. They have to flash to H930 variant firmware for bootloader unlock and TWRP installation, then flash to TWRP flashable zip to get radios back.
ChazzMatt said:
If by "recovery" you mean TWRP, yes.
Unless you are flashing a TWRP flashable zip, you need to flash full H930DS KDZ using Refurbish mode. Yes, you will lose TWRP recovery, but you can add it back with fastboot.
All H930 variants firmware (including H930DS) has fastboot. What have you flashed that doesn't have fastboot? Korean firmware does not. They have to flash to H930 variant firmware for bootloader unlock and TWRP installation, then flash to TWRP flashable zip to get radios back.
Click to expand...
Click to collapse
Thank you for your reply ChazzMatt,
But the problem and that my device is stuck on the LG Logo.
And if I press the power + Volume Down button, the screen turns black and then restart right behind.
So do you think I can flash the ROM KDZ with LGUP?
stradfred said:
Thank you for your reply ChazzMatt,
But the problem and that my device is stuck on the LG Logo.
And if I press the power + Volume Down button, the screen turns black and then restart right behind.
So do you think I can flash the ROM KDZ with LGUP?
Click to expand...
Click to collapse
Yes. Try to manually go into Download mode for LGUP.
ChazzMatt said:
Yes. Try to manually go into Download mode for LGUP.
Click to expand...
Click to collapse
No success. :crying::crying:
Ritazizy said:
No success. :crying::crying:
Click to expand...
Click to collapse
If you've lost download mode and fastboot mode then you'll need to do the button dance to get into QLD 9008 mode--then pay for a remote JTAG Octoplus box repair fix for $15-$35 (some give $20 discount to XDA members) on Ebay
EDIT: Found him: https://forum.xda-developers.com/member.php?u=6038524 (MFKilla). Here is what he offered few days ago: "For all xda members i have -20$ discount) Im from Moldova
And on my service no need disassemble the phone =)
Ritazizy said:
Why V30 Can't Update Android9.0 (Boot Logo Freeze)
My V30 (V300L) Can't Update Android 9.0 ,
before i never Update 9.0 success, but i would downgrade Android 8.0 for Root .
and i can root on Android 8.0 success , but i can upgrade Android 9.0 Stock but V30 Boot Freeze (LG Logo)
I do any way, is fail Boot freeze
I do flashrom by LGUP (Refurbish , OTA , Partition DL ) Fail
I dont understand, why cant upgrade.
Click to expand...
Click to collapse
We are in the same boat my friend. I have a V30 ( V300L ) LG+ korean operator. I have tried to update to pie several times without success. I have used a kdz from
lg-firmwares.com so I think I have used the correct software. LG bridge says it can't read the information of the cellphone. Also I have never received an OTA.
I have used LGUP for developers to upgrade it. Once the process is completed the phone gets stuck at the LG logo. I can fix this by downgrading to OREO using the refurbish mode of LGUP. It seems that my cellphone is gonna stay on OREO for long time. At least it hasnt bricked yet.
twisted_twice said:
We are in the same boat my friend. I have a V30 ( V300L ) LG+ korean operator. I have tried to update to pie several times without success. I have used a kdz from
lg-firmwares.com so I think I have used the correct software. LG bridge says it can't read the information of the cellphone. Also I have never received an OTA.
I have used LGUP for developers to upgrade it. Once the process is completed the phone gets stuck at the LG logo. I can fix this by downgrading to OREO using the refurbish mode of LGUP. It seems that my cellphone is gonna stay on OREO for long time. At least it hasnt bricked yet.
Click to expand...
Click to collapse
Me too My V30 stay Ansrois8.0 so long time.
up android 9.0 fail.
solutions for stuck bootlogo after installing pie?
packyman said:
solutions for stuck bootlogo after installing pie?
Click to expand...
Click to collapse
Detailed in the instructions for US998 Pie, as that has the most problems.