I accidentally formatted my internal SD card with TWRP instead of factory reseting. I can get into recovery, but loading any ROM hangs at the loading screen. For awhile, TWRP was asking for a password, and then somehow I hit the magic combination of things to make that stop happening. I adb pushed an updated TWRP and reinstalling various ROMs.
All this started from trying to install Hyperdrive RLS8. I was running RLS7 fine, went for a clean install, spaced out and formatted the phone, flashed the ROM, and had a whole slew of stability problems. Things would randomly crash instantly, booted only 50% of the time, when it did, installing things would break it, tried various things to fix it, fixing permissions and wiping cache's and such, and results were unpredictable. Kept re-formatting and reflashing with different options until I finally realized that I was formatting it and that's probably what the whole problem was.
Currently I can't boot into a ROM, it hangs on the boot animation. I tried another clean install with RLS7, and the same thing happens. I'm assuming that I need to get back to stock somehow, but I'm not sure how. Odin has always confused me. I used the all in one tool to root awhile back, and I only used odin to send a kernel tar file. If I download a stock build, it's a zip file... so how can I odin it? Is that what I need to do? I'm imagining at this point that the file structure is messed up and I need to rebuild it somehow. I don't have my nandroid backup on this computer, so I haven't tried that yet.
You can either odin stock. It's about a 1.8gb file.
Or you can get a known working ROM on your sd card, factory reset wipe, wipe preload, wipe system, install known working rom+gapps+whatever, wipe cache and wipe dalvik. Reboot. If it sticks at the samsung logo pull the battery and then try to reboot again. Sometimes first boot can take a while. I'd give it 10 minutes before throwing in the towel lol
I bricked my phone by updating Hyperdrive (which I will never (curse words... lots of them) use again. Can someone tell me where to find this stock file? I've been searching long enough to get frustrated and delete several less diplomatic posts, settling with this one.
hey guys, I am a little confused. I just came to the S4 from a galaxy nexus, and I previously used CWM as my recovery option when doing clean install of new ROMS.
When I rooted my S4, I installed TWRP (via goomananger, version 2.5.0.2) because of people saying its much better (on the galaxy nexus forums). However, I keep reading issues of people being stuck in bootloops for TWRP when wiping data.
My question is -- what is this issue? Are you not supposed to clean flash with TWRP?? Or do you only do "factory reset" option in TWRP and not wipe the data?
As I am a little confused on this issue, is it more safe to just install most recent CWM and use that as recovery instead?
Thanks alot
No worries
uberpippi said:
I accidentally formatted my internal SD card with TWRP instead of factory reseting. I can get into recovery, but loading any ROM hangs at the loading screen. For awhile, TWRP was asking for a password, and then somehow I hit the magic combination of things to make that stop happening. I adb pushed an updated TWRP and reinstalling various ROMs.
All this started from trying to install Hyperdrive RLS8. I was running RLS7 fine, went for a clean install, spaced out and formatted the phone, flashed the ROM, and had a whole slew of stability problems. Things would randomly crash instantly, booted only 50% of the time, when it did, installing things would break it, tried various things to fix it, fixing permissions and wiping cache's and such, and results were unpredictable. Kept re-formatting and reflashing with different options until I finally realized that I was formatting it and that's probably what the whole problem was.
Currently I can't boot into a ROM, it hangs on the boot animation. I tried another clean install with RLS7, and the same thing happens. I'm assuming that I need to get back to stock somehow, but I'm not sure how. Odin has always confused me. I used the all in one tool to root awhile back, and I only used odin to send a kernel tar file. If I download a stock build, it's a zip file... so how can I odin it? Is that what I need to do? I'm imagining at this point that the file structure is messed up and I need to rebuild it somehow. I don't have my nandroid backup on this computer, so I haven't tried that yet.
Click to expand...
Click to collapse
Try using odin to flash to stock. Then re-root and install custom recovery and whichever rom. I had a similar problem posted here with no help from the big brains. Had to trial and error with caution on my own. Kinda disappointing since the answer is quite simple once you connect all the dots. Flashing in odin will fix yer internal storage problem because it redefines everything.
cidorov said:
Try using odin to flash to stock. Then re-root and install custom recovery and whichever rom. I had a similar problem posted here with no help from the big brains. Had to trial and error with caution on my own. Kinda disappointing since the answer is quite simple once you connect all the dots. Flashing in odin will fix yer internal storage problem because it redefines everything.
Click to expand...
Click to collapse
uberpippi said:
I accidentally formatted my internal SD card with TWRP instead of factory reseting. I can get into recovery, but loading any ROM hangs at the loading screen. For awhile, TWRP was asking for a password, and then somehow I hit the magic combination of things to make that stop happening. I adb pushed an updated TWRP and reinstalling various ROMs.
All this started from trying to install Hyperdrive RLS8. I was running RLS7 fine, went for a clean install, spaced out and formatted the phone, flashed the ROM, and had a whole slew of stability problems. Things would randomly crash instantly, booted only 50% of the time, when it did, installing things would break it, tried various things to fix it, fixing permissions and wiping cache's and such, and results were unpredictable. Kept re-formatting and reflashing with different options until I finally realized that I was formatting it and that's probably what the whole problem was.
Currently I can't boot into a ROM, it hangs on the boot animation. I tried another clean install with RLS7, and the same thing happens. I'm assuming that I need to get back to stock somehow, but I'm not sure how. Odin has always confused me. I used the all in one tool to root awhile back, and I only used odin to send a kernel tar file. If I download a stock build, it's a zip file... so how can I odin it? Is that what I need to do? I'm imagining at this point that the file structure is messed up and I need to rebuild it somehow. I don't have my nandroid backup on this computer, so I haven't tried that yet.
Click to expand...
Click to collapse
Yes this would probably be your best bet. I wouldn't say the answer "is quite simple when you connect the dots" though, because with that logic there would be no PC problems, you would just connect the dots and format the harddrive and Windows will redefine everything else for you!
But back to seriousness, you have to download a stock factory image and its actually a tar.md5 file and not a .zip because you cant flash zips through odin. The stock factory images can be found in the development section, and they are usually quite large files (2gb+ when extracted!) and you will have to download odin and make sure you have the latest usb drivers from samsung. Then its pretty straight forward, The threads in the development section have guides for how to use odin. The stock image contains all the partitions within in it and will effectively repartition your device when you flash it so no need to use a pit file.
Surge1223 said:
Yes this would probably be your best bet. I wouldn't say the answer "is quite simple when you connect the dots" though, because with that logic there would be no PC problems, you would just connect the dots and format the harddrive and Windows will redefine everything else for you!
But back to seriousness, you have to download a stock factory image and its actually a tar.md5 file and not a .zip because you cant flash zips through odin. The stock factory images can be found in the development section, and they are usually quite large files (2gb+ when extracted!) and you will have to download odin and make sure you have the latest usb drivers from samsung. Then its pretty straight forward, The threads in the development section have guides for how to use odin. The stock image contains all the partitions within in it and will effectively repartition your device when you flash it so no need to use a pit file.
Click to expand...
Click to collapse
Just to follow up, that's what I ended up doing. I used the "No-wipe" factory image, odin'd it, re-rooted (I don't know if I had to do that step, but I did), and then loaded my ROM of choice and it works perfectly now. Thanks!
First off I am on mdk and rooted and up until today have been running hd 10.2. I had been having some weird things happen with twrp 2502 so I went into goo and tried to update to the newest version of twrp. it downloaded and went through with everything and I rebooted into recovery. once I got into recovery it was showing I was still on 2502, but it was asking for a password which I had never seen before. I backed out and tried to boot into my rom again and it got stuck on the samsung custom screen. pulled the battery a few times and still kept getting stuck. went back into recovery and tried to restore a known good backup that I had restored before, but it keeps failing. I had rls12 on my phone so I tried installing it dirty since I cant wipe anything due to the whole password thing in twrp which said it was succesful but still gets stuck on the samsung custom screen. it sits there for about 10 seconds and loops. I tried about 10 more times to get my backup restored and it finally finished and booted into the rom. I left it this way for an hour or so and did some stuff with my phone, tried to update twrp again which did the same thing again and still shows 2502. after the reboot I am back to the same problem of not being able to do anything in twrp except restore or dirty flash, I cant get the usb to mount in twrp so I cant try putting another rom on the phone unless I go and buy a micro sd adapter.
I am in the process of downloading a stock mdk rom to try and flash in odin, but is there anything I can try before I go through with this, or is it pretty much my only option.
after some more research I think I figured out what caused all this. I wiped the data partition with the old version of twrp which screwed it up pretty bad. Apparently the older versions of twrp were known to have this problem. I kept trying to restore, but trying to restore kept failing on the data partition. After about 25 attempts of trying to restore just the data partition I was able to get it to work finally, and then I restored the the others and got it to boot back into the rom. like an idiot I rebooted the phone back into recovery after it finished and had the same problem again. another couple hours wasted trying to restore the data partition and it worked again and this time i was able to get twrp to update and then went back to recovery and formated the data partition again and it seems to have fixed the problem. Now to figure out why hd rls 12 wont install.
Hey guys.
So last night I was trying to update the rom on my Nexus 9 from a 5.02 release of AICP to the latest one. I boot into TWRP and it asks me for my pass code, then I take a backup, clear the caches and try to install the rom (from the internal storage). I don't think it gave any error messages, but when I rebooted and it got to the screen where you enter the password (I'm guessing where it decrypts or something), it said something about an internal error and that I should contact the manufacturer - when I tried to put the password in it just says that settings crashed over and over.
I tried to restore the backup; as well as factory reset and install the new rom fresh; I keep getting /vendor mount issues, etc. I even tried deleting the system partition and installing the new one, still no dice.
So I'm basically dead in the water at the moment (with no OS at all haha), does anyone have experience with this or any ideas for what to do? All ideas appreciated and thanks in advance.
There may be other ways, but I would suggest booting into bootloader and fastboot flash the stock 5.1.1, factory image. Tutorial here > http://forum.xda-developers.com/nexus-9/general/guide-how-to-unlock-bootloader-flash-t3035153
Alright, I know enough to be dangerous. I rooted my Samsung tab a 10.1 by installing twrp and then super su, all went fine. I then began to try and make a nandroid back up. It kept saying unable to mouth data, so I read a little and I changed data format. This caused a boot loop. Went in and changed back data format and used twrp to reset. All was fine again. I then attempted to use titanium backup. I recited a message backup was successful and reboot. I rebooted and now a boot loop. I then tried to reset with twrp and my file is gone. So, I downloaded what I thought was the right firmware to flash with Odin but just made that worse. Does anyone have a download for a rom I can flash with Odin to get this thing going. I have downloaded a couple and the either don't work or are the wrong one. SM-T580.
tlstaggs said:
Alright, I know enough to be dangerous. I rooted my Samsung tab a 10.1 by installing twrp and then super su, all went fine. I then began to try and make a nandroid back up. It kept saying unable to mouth data, so I read a little and I changed data format. This caused a boot loop. Went in and changed back data format and used twrp to reset. All was fine again. I then attempted to use titanium backup. I recited a message backup was successful and reboot. I rebooted and now a boot loop. I then tried to reset with twrp and my file is gone. So, I downloaded what I thought was the right firmware to flash with Odin but just made that worse. Does anyone have a download for a rom I can flash with Odin to get this thing going. I have downloaded a couple and the either don't work or are the wrong one. SM-T580.
Click to expand...
Click to collapse
Alright, I was using an olsee version of odin, got the new one and I was able to flash a rom. It says tab a 6 on boot up bit it is functional. Now my question? Can anyone recommend a custom rom that is nebiew friendly. I'm food at following directions and problem solving but I about had a panic attack, I just got this $300 thing. Sigh off relief for at least getting it functional again.
Hmm
Ok so I have flashed a stock rom, 6.0.1, flashed TWRP, and installed SuperSU. all is working well again. However I am still getting "unable to mount data" message in TWRP when i try to make a backup. If i uncheck data on the list it backs up fine. This is what got me in that boot loop pickle before when i tried to change the data format. What data format? Idk, im scared to jack with it anymore, and im done with titanium backup, it has burned me in the past, though i think what went wrong there was when i backed everything up i then went and change data format and after all that restored and the backup was in a different data format. Idk newbie guess. I am just trying to getting a reliable nandroid backup. Anymore ideas? Perhaps i should just leave it alone and be happy with just having root.
Its my daughters bog standard, cheap chinese MTK6580 phone (uhappy up580 if it matters)
It came with stock 5.0 a few years back so I flashed TWRP, rooted it, ported a CRdroid 5.1 rom for it and was working fine. Yesterday on boot every app refused to start, or stopped, or froze including stock launcher and settings so I couldnt do anything at all. Booted to TWRP and wiped cache and dalvik but although TWRP said completed, it hadnt.
So decided to wipe EVERYTHING including data and again TWRP said it had but upon reboot the faulty rom was still there, not working.
Tried to flash a backup that ended in tar error, fixed that and it flashed the backup fine, rebooted but it hadnt.
Tried to TWRP flash a new rom, said it had but it hadnt,
Used SPFlash tools to flash the stock 5.0 rom, THAT said it completed after the usual time and procedure, rebooted but it hadnt
Used SPFlash tools to completely format and wipe the phone which also said it had completed but it hadnt.
I CANNOT wipe this phone using any method I know of! or install or flash anything! Just this same custom rom that was fine for years and just went wrong. Does ANYONE know how I can somehow wipe this phone or flash a new rom? Tried flashing a TWRP with SP tools AND a TWRP .img and they all said completed but obviously, nothing did.... I've accidently bricked phones easier than I can deliberately wipe this one
Any help greatly appreciated.
emmc is weared out. therefore it is read only
aIecxs said:
emmc is weared out. therefore it is read only
Click to expand...
Click to collapse
Gah... exactly what I suspected but hoped not
cheers