Hello
I have a problem with my Tablet Z LTE (pollux) recovery. If i flash for instance TWRP 3.0.2.0. (or any other version for that matter (including dualrecovery)) then i can't boot into the rom i installed (no matter what version).
I only got the TWRP recovery and can only boot into recovery when i flash it. Then i can install whatever rom (in this case RR 6) and the rom works fine.
Now the problem is that i can't get back to the TWRP recovery but only the recovery i have added in this thread.
Things i have tried:
Xperia Companion flash and reset with newest firmware
EMMA flash and reset with newest firmware
Flashtool 4.3 rom
Both versions of RR
Dualrecovery
All versions of TWRP i can find
I have cleared every cache, data, whatever else multiple times.
Any suggestions would be very appreciated!
You need to flash recovery to FOTApartition for it to become permanent.
Read my tutorial : https://forum.xda-developers.com/xp...de-tutorial-sony-xperia-tablet-z-lte-t3392831.
Keep in touch if you have more questions.
Thank you!
Related
Hello,
I had a Custom ROM installed on my device (Xperia X10i) with Unloacked Bootloader. cwm recovery was installed too.
I then mistakenly tried to install a wrong update from ROM Toolbox, this required a Reboot.
Since the there has been a Boot Loop on my device and I am unable to boot to Recovery as well.
I am able to Flash some Kernels using Flashtool, but the device is still unrecognized.
The Boot Loop process is as follows:
Shows the Boot Logo of the Kernel > and then displays a error related image and then it boots again.
It seems that the Custom ROM went corrupt and is not able to boot to recovery as well.
What options can I think of to recover from this.
Any help is highly appreciated.
Thanks.
ankitx10i said:
Hello,
I had a Custom ROM installed on my device (Xperia X10i) with Unloacked Bootloader. cwm recovery was installed too.
I then mistakenly tried to install a wrong update from ROM Toolbox, this required a Reboot.
Since the there has been a Boot Loop on my device and I am unable to boot to Recovery as well.
I am able to Flash some Kernels using Flashtool, but the device is still unrecognized.
The Boot Loop process is as follows:
Shows the Boot Logo of the Kernel > and then displays a error related image and then it boots again.
It seems that the Custom ROM went corrupt and is not able to boot to recovery as well.
What options can I think of to recover from this.
Any help is highly appreciated.
Thanks.
Click to expand...
Click to collapse
If you flash another kernel, did you menage to boot into Rom or recovery???
If you able to boot into Rom, and if you can use it without problem, OK. If you can't boot into Rom but can boot into recovery, wipe everything, format system, data, cash, dalvik cash, and install some custom rom zip via recovery.
If you not able to boot Rom or recovery, recommend to reflash your phone Stock Rom with SEUS (Sony Update Service), and then flash Custom Rom and kernel again.
Dzufa said:
If you flash another kernel, did you menage to boot into Rom or recovery???
If you able to boot into Rom, and if you can use it without problem, OK. If you can't boot into Rom but can boot into recovery, wipe everything, format system, data, cash, dalvik cash, and install some custom rom zip via recovery.
If you not able to boot Rom or recovery, recommend to reflash your phone Stock Rom with SEUS (Sony Update Service), and then flash Custom Rom and kernel again.
Click to expand...
Click to collapse
Yes, I Flashed the Stock Xperia X10 ROM and its all working fine now.
Thanks.
Bootloop after 1 flash x8 firmware
Hi, i have a same problem.
today i idvertent to flash x8 firmware and now my phone xperia x10 mini is bootloop. no se logo and can't to repair with update service.
heeeeeeeelp me !
Hi, newbie here. I have trouble with wifi. My phone is Xperia P
I installed aospa rom, at the beginning everything was fine but few hours later I couldnt turn wifi on. I didint know what to do, so I just factory reset the phone. Same thing happened.
Then I installed Blur Line (CM 11) rom, same thing happened again.
On advanced setting it says Mac adress unavailable (idk if this is related with problem)
I searched google and xda for possible solutions.
solution 1 is installing sqlite editor and changing "wifi_display_on" value to 0
this didnt work because it was already 0
solution 2: settings/wi-fi/advanced/wi-fi region code
this didnt work too. I select Turkey (I live in Turkey) but whenever I exit settings and turn back none of the region is selected.
solution 3: copy WCNSS_qcom_wlan_factory_nv.bin file to somewhere
it is on motorola atrix hd thread, so idk if this can work for my phone too. I downloaded it but havent tried yet
Do you think it can work for my phone, or is there any "wifi fix file" for Xperia P
What sould I do now? Should I install another rom (slimkat, pacman, miui v5) or is there any solution for fixing wifi?
Thanks for replies.
Describe the steps you followed to install the ROM.
hliasant said:
Describe the steps you followed to install the ROM.
Click to expand...
Click to collapse
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Fenomenon said:
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Click to expand...
Click to collapse
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
hliasant said:
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
Click to expand...
Click to collapse
thanks for help :good:
I install slimkat 8.8 and wifi works fine atm :laugh:
Hello guys,
I wanted to flash Cyanogen 13.0 on my OPX. I followed the instructions on the Cyanogen-Downloadsite, but after flashing with TWRP I always stucking at the bootlogo....
I waited more than 30 min, but nothing happens... While flashing I get no errors or warnings.... It seems to be alright...
Then I tried another Marshmallow ROM, but I get always the same issue...
Thank you in adavance!
need more info dude, what rom were you before the issue presented itself ? recovery version ? data, cache & system formatted to which filesystem ? what did you wipe ? what all did you flash with or after the rom ?
hi
asuming u have opened bootloader and have installed twrp this is what i do
1.put the rom and gapps on the root of the phone storage
2. factory/data rest in twrp
3.flash rom via twrp
4.clean chache/delvi
5.flash gaaps
6.clean cache/delvi again
reboot system and im good to go try this do a full flash the way i have mentioned dont do a dirty flash
im sure u will succeed good luck
If you didn't unlock the bootloader then it will not boot anything other than the stock OS.
Hello,
I had already a custom ROM on my phone (AOSP Extended). When I opened TWRP and wiped everything (including system, data and internal), TWRP couldn't install my ROM because of some error code 7 (but that's not the main problem here). When I opened fastboot on my phone, I installed twrp into my phone using fastboot. The TWRP did boot up just fine. But when I clicked "install" and selected the custom ROM, TWRP simply closes, reboots the phone and TWRP starts again asking me if I want to allow changes. I noticed that this isn't because of my custom ROM. I tried also other things such as Gapps and TWRP does the same thing.. I don't know how to fix this. Can you please help? Thank you!
Hey you smart people
im driving NUTS
I installed a completely fresh new A11 stock rom and I lost my custom recovery.
This is my install procedere:
(fastboot)
-set SLOT B and install twrp
-then boot to TWRP recovery and Flash TWRP.zip again
-reboot to twrp recovery
-wipe Cache,system,Data
-flash Rom A11 STOCK 12.0.3.0
-flash SHRP
-reboot in SHRP again
Set SLOT A!
-Format Data
-Reboot to System
Boot into recovery. Nothing! Stuck on Adndroid ONE boot screen
What i'm doing wrong? Please help
Did you installed on slot "B" and set active on "A"?
This is the error, i think.
I thought Rom is always installed in the inactive slot. Netherles, where's the recovery gone..?
After all kind of flashes now SHRP is installed on slot A and image is installed on slot A.
And now I'm stuck on ne MI Logo and got bootloop.
Latest magisk is installed
EDIT:
Wiping Data + System
Boot into image possible! BUT no boot into recovery -.-
im really newbie in this case. But the latest stock rom A11 works with TWRP / SHRP and others? if anything goes wrong, just try flash stock withouth anything and wait a specialist user help.
Praeco said:
im really newbie in this case. But the latest stock rom A11 works with TWRP / SHRP and others? if anything goes wrong, just try flash stock withouth anything and wait a specialist user help.
Click to expand...
Click to collapse
Flashing Stock rom works. Latest TWRP and SHRP should both work on A11.
But i just dont get rom AND recovery to work properly on the same slot :/
EDIT:
Okay. I got some help in Telegram!
TWRP is NOT ready for permanent install!! <----
I did everything now this way:
1. first flash boot twrp in fastboot
2. install everything a need
3. back to fastboot and flash boot.img
thats the way for now
Glad that you found a way! now im searching how to downgrade stock 10 to 9 withoutg losing sensors. But im very newbie and need a guide like to explaind like im five.