Maby this post help you when you get bootlop to recovery each time after installing twrp and custom rom.
Problem is exsdcard uses on old phone:
1. Disable phone
2. Remove sdcard
3. Run phone.
4. After system is run put sdcard again and delete twrp folder in file manager.
5. Reboot phone.
End.
Didn't work for me.
eric5949 said:
Didn't work for me.
Click to expand...
Click to collapse
1.Reinstall twrp, don't boot the rom, boot first in recovery
2.format data, wipe cache, art.
3.reboot to recovery again and flash any custom roms
MrDraska said:
1.Reinstall twrp, don't boot the rom, boot first in recovery
2.format data, wipe cache, art.
3.reboot to recovery again and flash any custom roms
Click to expand...
Click to collapse
Bootloop Never gets past LG screen now, and all computer software thinks my phone is a Pixel.
Fixed it, phone starts up just fine. Back to stock.
Related
Hi!
I rooted my wt19i phone and installed a 5.0.2.7 recovery.
Then I went to recovery and wipe/format everything for the new rom, but the rom wasn't on the SD.
Then I reboot my phone, but I couldn't step in again into the recovery.
What is the problem?
Why can't I go into recovery?
Pls, help!
ps: sorry for my english, I'm hungarian
Tonchi said:
Hi!
I rooted my wt19i phone and installed a 5.0.2.7 recovery.
Then I went to recovery and wipe/format everything for the new rom, but the rom wasn't on the SD.
Then I reboot my phone, but I couldn't step in again into the recovery.
What is the problem?
Why can't I go into recovery?
Pls, help!
ps: sorry for my english, I'm hungarian
Click to expand...
Click to collapse
That's because maybe you click in the option format sd card. When you install a new rom, just wipe cache, wipe dalvik & if in the thread rom said that you need to wipe data, you must wipe it. Not format anything.
mauam said:
That's because maybe you click in the option format sd card. When you install a new rom, just wipe cache, wipe dalvik & if in the thread rom said that you need to wipe data, you must wipe it. Not format anything.
Click to expand...
Click to collapse
So, in the mount and storage menu doesn't have to format, okay.
Woth flashtool, i put on my phone a 4.0.2.A.0.58 rom.
So, i think, i'm fine
THX!
I think You have locked bootloader, so when You wipe everything, doesn't install new ROM and reboot device - You have also wiped recovery That's why You wasn't able to boot into it : )
Bolussimo said:
I think You have locked bootloader, so when You wipe everything, doesn't install new ROM and reboot device - You have also wiped recovery That's why You wasn't able to boot into it : )
Click to expand...
Click to collapse
That's right. If you haven't flashed a kernel with a recovery mode installing a recovery by any other method installs it to the system partition.
you can find a flashable zip for cwm recovery in themes and apps section. remember to flash it whenever you change your rom before exiting recovery mode.
Been using twrp since rooting note II. I wanted to try out 4.4 PA but they said to only use cwm. It was late so I decided to be lazy and since I used to use rom manager all the time I installed it to flash cwm recovery then booted into recovery to install touch version. It wasn't showing the touch version so selected to restart to check to see where I saved it to it would not boot past the first "note II" splash screen. Battery pull then back into recovery and went ahead and flashed PA 4.4 and now it will get past the splash screen then shows boot animation but then starts all over.
Is this a rom manager issue?
can I flash twrp from within cwm recovery?
will I have to basically reroot it?
Any suggestions on how to get back to twrp and to a usable phone?
thanks
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
cadavjo said:
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Nope did my standard wipe cache, wipe dalvik, and factory reset then flashed rom then gapps. Going to go back to twrp and wait for 4.4 to be more stable before I try it out again and maybe then I can use twrp to flash it.
thanks for the help
cadavjo said:
If you download a .zip of twrp and flash it you will have twrp for your recovery.
As long as you flash a rooted rom, you will be rooted.
Not sure what happened with the boot loop, did you by chance wipe the system without flashing another before booting?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
that didn't work. flashed newest twrp then rebooted into it and tried to flash tweaked and sticks at the splash screen again
jdpeck said:
that didn't work. flashed newest twrp then rebooted into it and tried to flash tweaked and sticks at the splash screen again
Click to expand...
Click to collapse
Have you wiped data at all? You need to wipe data / factory reset when switching roms, and it sounds like you havent.
fallingup said:
Have you wiped data at all? You need to wipe data / factory reset when switching roms, and it sounds like you havent.
Click to expand...
Click to collapse
As stated above, on both cwm and twrp I wiped caches and did factory reset and still having the issues. Once back on twrp I even formatted internal memory thinking maybe rom manager messed something up on it and still can't get passed the splash screen.
jdpeck said:
As stated above, on both cwm and twrp I wiped caches and did factory reset and still having the issues. Once back on twrp I even formatted internal memory thinking maybe rom manager messed something up on it and still can't get passed the splash screen.
Click to expand...
Click to collapse
Copy a ROM to your SD card (external not internal)
Install cwm and format data (actually full format, where /data/media gets wiped) and system
Install rom
Reboot
TWRP has some issues randomly with corrupting /data, that's why I no longer use it.
fallingup said:
Copy a ROM to your SD card (external not internal)
Install cwm and format data (actually full format, where /data/media gets wiped) and system
Install rom
Reboot
TWRP has some issues randomly with corrupting /data, that's why I no longer use it.
Click to expand...
Click to collapse
Finally got it. Thought using odin to flash back to root 66 and start fresh would work but after that it was still going to the splash screen then black and a battery pull had to be done. TWRP back ups would fail when trying to restore, so I reverted back to an older version of twrp and it finally let a back up be installed and it booted up just fine!!
thanks for all the suggestions
Im having a similar problem to yours, I am using twrp and flashed PA 3.99 the phone works great, but if my battery dies or i restart the phone or shut it down it automatically wont get passed the samsung logo, or sometimes the PA logo, the only work arounds ive seen to it is to wipe the cache and dalvik to boot, but when that fails i have to install the whole rom over again. any ideas?
i tried to install cwm in my s2 following this link: http://www.ibtimes.co.uk/install-an...ible-cwm-recovery-galaxy-s2-i9100-how-1434170
i stayed in the 11 step "PASS", after that, appears the samsung text and screen turns off.
Cwm works, i wipe cache but nothing happend.
Please help
NeguitO said:
i tried to install cwm in my s2 following this link: http://www.ibtimes.co.uk/install-an...ible-cwm-recovery-galaxy-s2-i9100-how-1434170
i stayed in the 11 step "PASS", after that, appears the samsung text and screen turns off.
Cwm works, i wipe cache but nothing happend.
Please help
Click to expand...
Click to collapse
Try this first.
If your device is stuck at boot animation or facing boot loop issues then try the following steps:
Disconnect your phone from computer, close Odin and remove phone's battery. Reinsert it back within 3 to 4 seconds, re-launch Odin and then repeat the tutorial from step 4.
Click to expand...
Click to collapse
Otherwise, just go into your recovery and flash a custom KitKat or a Lollipop ROM. This method would remove all the data present on the phone, so I am assuming that you took a backup before handling odin. To flash a ROM, do this:
1. Download ROM and GApps and put them in your storage(MOUNT SDCARD FROM THE RECOVERY ITSELF)
2. Wipe Data/Factory Reset
3. Wipe Cache Partition
4. Advanced>Wipe Dalvik Cache
5. Flash ROM AND GApps
6. Reboot system.
Then you're good to go.
Regards.
warrior1208 said:
Try this first.
Otherwise, just go into your recovery and flash a custom KitKat or a Lollipop ROM. This method would remove all the data present on the phone, so I am assuming that you took a backup before handling odin. To flash a ROM, do this:
1. Download ROM and GApps and put them in your storage(MOUNT SDCARD FROM THE RECOVERY ITSELF)
2. Wipe Data/Factory Reset
3. Wipe Cache Partition
4. Advanced>Wipe Dalvik Cache
5. Flash ROM AND GApps
6. Reboot system.
Then you're good to go.
Regards.
Click to expand...
Click to collapse
Thanks you! my S II is ok now.
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
D03035790 said:
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
Click to expand...
Click to collapse
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
rcstar6696 said:
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
Click to expand...
Click to collapse
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
D03035790 said:
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
Click to expand...
Click to collapse
Use this one https://mega.nz/#!rI4y2bJS!VksDLNy_a8cy8x-VBviYRkTP2SdSBm7Rs9G445vUXCU
This is twrp but it works with cmbased roms.
i installed twrp and lazyflash, then rebooted . everything was fine. Then i went back to recovery to install supersu.zip, I installed and then device rebooted... and then stuck at MI logo.. plz help, i am able to go back to twrp.
waiting for the reply
cutecrocodile said:
i installed twrp and lazyflash, then rebooted . everything was fine. Then i went back to recovery to install supersu.zip, I installed and then device rebooted... and then stuck at MI logo.. plz help, i am able to go back to twrp.
Click to expand...
Click to collapse
Flash lazyflasher again.
MyNameIsRage said:
Flash lazyflasher again.
Click to expand...
Click to collapse
checking
MyNameIsRage said:
Flash lazyflasher again.
Click to expand...
Click to collapse
still bootloop, stuck at Mi Logo
cutecrocodile said:
still bootloop, stuck at Mi Logo
Click to expand...
Click to collapse
Do you have a pc?
MyNameIsRage said:
Do you have a pc?
Click to expand...
Click to collapse
yes,
MyNameIsRage said:
Flash lazyflasher again.
Click to expand...
Click to collapse
can i factory reset it from twrp? if that solves my problem
cutecrocodile said:
can i factory reset it from twrp? if that solves my problem
Click to expand...
Click to collapse
You can actually flash a custom rom, and then revert back to miui, this would take time, but is much more easy, and has less chances to permanently brick your device.
MyNameIsRage said:
You can actually flash a custom rom, and then revert back to miui, this would take time, but is much more easy, and has less chances to permanently brick your device.
Click to expand...
Click to collapse
how to do it, i have already downloaded rr rom and cm 14.1
cutecrocodile said:
how to do it, i have already downloaded rr rom and cm 14.1
Click to expand...
Click to collapse
ok, so first of all what you need is the cm firmware and the rom file, and also gapps if u need.
this is the firmware file - https://androidfilehost.com/?fid=817550096634766008
Follow these steps -
1. Copy the firmware and rom file (and gapps if you have) to a place other than your phones internl storage like on an sd card or i you have a pc, then theres no problem, just leave the files on pc.
2. boot to twrp, here go to wipe and then select format data, here type yes and enter - this will wipe your internal storage. after that go back and wipe system, data, cache, dalvik.
3. now if you have a memory card inserted, with the rom files then skip this step, but if you do not,then connect your phone to pc using the data cable and copy the files to internal storage.
4. now firstly install the firmware,then the rom, and then any addons like gapps.
5. now reboot. you will boot to rr.
6. after booting, if you wish to install miui again, head to http://en.miui.com/download.html
and from there download the build you like, (choose redmi note 4x and there the global build)
7. now again boot to twrp, and format data, and wipe data, cache, system and dalvik. now copy the miui file, super su and the lazyflasher file.
8. install miui and lazyflasher, and reboot (it will say 'no os installed' but its fine, just reboot)
9. now after miui has booted, reboot to recovery, and install super su and lazyflasher, this should do it
thank you so much, i did it
super su should be installed first or lazy flash?
cutecrocodile said:
i installed twrp and lazyflash, then rebooted . everything was fine. Then i went back to recovery to install supersu.zip, I installed and then device rebooted... and then stuck at MI logo.. plz help, i am able to go back to twrp.
Click to expand...
Click to collapse
You have to clear dalvik/art cache after flashing supersu.zip and restart. It will boot loop one time and on second time the phone will successfully boot. Now flash lazyflasher and follow the steps again.