Code:
/*
** Your warranty is now void.
**
** We are not responsible for bricked devices, dead SD cards,
** thermonuclear war, or you getting fired because the alarm app failed. Please
** do some research if you have any concerns about features included in this ROM
** before flashing it! YOU are choosing to make these modifications, and if
** you point the finger at us for messing up your device, we will laugh at you.
**
**/
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
IMPORTANT INFORMATION
Root is not included by default on LineageOS 14.1. You need to install an add-on via recovery. You only need to install this once. You can download the SU add-on here
After installation go to Settings>Developer Options>Root access and set to Apps only or Apps and ADB.
LineageOS comes with LineageOS Recovery by default, if you don't like it (like me ) you can flash alternative recoveries using IsoRec. You really need 1GB /system partition. The smallest build-configuration is larger than 512mb. You can use ODIN, but you can also use Lanchon's REPIT.
If you're interested in BLN, check this thread for a complete support of this feature.
If you're interested to go to emulated-storage, check this thread.
Official LineageOS Wiki: http://wiki.lineageos.org/
Changelog: https://www.lineageoslog.com/14.1/i9100
LineageOS official nightly builds
https://download.lineageos.org/i9100
Google Apps:
http://opengapps.org/
XDA:DevDB Information
Lineage OS 14.1, ROM for the Samsung Galaxy S II
Contributors
rINanDO, lysergic acid, serenitys
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2017-02-13
Last Updated 2017-04-20
Reserved
gapps link dead
[i9100] Useful fixes for LineageOS 14.1 [7.1.2]
[i9100] Useful fixes for LineageOS 14.1 [7.1.2]
I am very glad that you are here!
It may be helpful to you:
Scripts moved here ...
BatyuS said:
gapps link dead
Click to expand...
Click to collapse
I think ist is just a mistake and should mean "open gapps"
http://opengapps.org/
Sent from my ME173X using XDA-Developers Legacy app
In General forum? Why not in Original Android Development?
Which GApps exactly?
Just to prevent from questions like "which GApps architecture and version do I need?"
This link will show you the minimal OpenGapps variant independently of your last visits (cookies never forget you)
http://opengapps.org/?download=false&arch=arm&api=7.1&variant=pico
(so only the variant needs to be changed if you prefer bigger packages)
Edit: Check this post to see how to create a customizable config that allows you to control the OpenGApps installer, e.g. to downsize bigger GApps packages for flashing Pixel Launcher while skipping other components you don't want. Included a sample config-file there as well.
I have questions:
FM Radio?
upgrade of CM 13?
TWRP emuled storage installation and new repit procedure?
from cm-13.0-20161218-nightly to lineageOS 14.1
shkedov said:
In General forum? Why not in Original Android Development?
Click to expand...
Click to collapse
Hi everyone, I am a low-average level user so I wonder if there is a step-by-step guide to upgrade my I9100-international from cm13 to lineageOS 14.1
bepcan said:
Hi everyone, I am a low-average level user so I wonder if there is a step-by-step guide to upgrade my I9100-international from cm13 to lineageOS 14.1
Click to expand...
Click to collapse
Only if you're coming from cm13 without losing data (i.e. your apps installed). Otherwise - wipe clean and install the recent nightly only (and gapps if you wish).
-3. Get a good cup of coffee.
-2. You must have at least 1GB partition of /system. If not, first repartition your storage (see OP) and then come back to here to proceed.
-1. Proceed to oficial download site: "https://download.lineageos.org/i9100 for the current build, https://www.androidfilehost.com/?w=files&flid=154035 for the experimental build, thanks to @ale5000 for uploading this for us.
0. Download the latest 2 following files: Nightly and Experimental (as for now lineage-14.1-20170208-experimental-i9100-signed.zip and lineage-14.1-20170208-nightly-i9100-signed.zip). Verify their md5 checksum to prevent errors, it is vital to do so.
Optional - download gapps from [url]http://opengapps.org/[/URL] for android 7.1, ARM (the nano is fine for me).
1. Boot into recovery. Install the "experimental" zip (Dirty flash! No wipes!).
1.5. You can reboot now into system, just to get a systemUI crash errors and a blank screen. Pretty useless. If you got to here then force reboot to recovery and proceed to step 2.
2. Reboot into recovery! Install the "Nightly" zip and gapps.
3. Wipe cache and boot to system.
There you go kiddo'.
Good luck! :fingers-crossed:
Whats Working Nd Not Working Tell Pls
rowdykumar786 said:
Whats Working Nd Not Working Tell Pls
Click to expand...
Click to collapse
It is relatively very stable to me, most is working! Phone and RIL, audio, GPS, BT, and a lot more!
I believe battery has improved too. Performance is very well.
This is my only phone, I rely on this phone, and on my daily use no problems so far! And yeah this ROM rocks!:good:
Go for it dude!
I experience a problem with libUMP making my own build. Is this : https://forum.xda-developers.com/showthread.php?p=69920779 still a working solution?
Verstuurd vanaf mijn GT-P7500 met Tapatalk
shkedov said:
Without losing data (i.e. your apps installed).
-3. Get a good cup of coffee.
-2. You must have at least 1GB partition of /system. If not, first repartition your storage (see OP) and then come back to here to proceed.
-1. Go to https://download.lineageos.org/i9100.
0. Download the latest 2 following files: Nightly and Experimental (as for now lineage-14.1-20170208-experimental-i9100-signed.zip and lineage-14.1-20170208-nightly-i9100-signed.zip). Verify their md5 checksum to prevent errors, it is vital to do so.
Optional - download gapps from http://opengapps.org/ for android 7.1, ARM (the nano is fine for me).
1. Boot into recovery. Install the "experimental" zip (Dirty flash! No wipes!).
1.5. You can reboot now into system, just to get a systemUI crash errors and a blank screen. Pretty useless. If you got to here then force reboot to recovery and proceed to step 2.
2. Reboot into recovery! Install the "Nightly" zip and gapps.
3. Wipe cache and boot to system.
There you go kiddo'.
Good luck! :fingers-crossed:
Click to expand...
Click to collapse
Do you don't include TWRP emu 3.03 https://forum.xda-developers.com/showpost.php?p=71009597&postcount=88 Interesting
Yes I would like to know upgrade path to official using twrp3.0.3 for emulated storage too please
todonormal said:
Do you don't include TWRP emu 3.03 https://forum.xda-developers.com/showpost.php?p=71009597&postcount=88 Interesting
Click to expand...
Click to collapse
People asked for a simple migrating guide from CM13 to LOS14.1, if someone isn't heading to switch to emulated I don't see a reason to send people to install an emu-recovery while they don't wish to.
It should be a decision for users.
Therefore I don't see a reason to include special addtional options besides the basics (exp+nightly+gapps). Whoever wants to expand more should simply read the OP and the links.
As for myself yes, I'm on emu now.
shkedov said:
People asked for a simple migrating guide from CM13 to LOS14.1, if someone isn't heading to switch to emulated I don't see a reason to send people to install an emu-recovery while they don't wish to.
It should be a decision for users.
Therefore I don't see a reason to include special addtional options besides the basics (exp+nightly+gapps). Whoever wants to expand more should simply read the OP and the links.
As for myself yes, I'm on emu now.
Click to expand...
Click to collapse
Could we have a short video to show how to switch to emulated storage?
Regards.
New build lineage-14.1-20170213-nightly-i9100-signed.zip is up
https://www.lineageoslog.com/14.1/i9100
laptopu said:
Yes I would like to know upgrade path to official using twrp3.0.3 for emulated storage too please
Click to expand...
Click to collapse
Hmm, because this phone is my main and only phone, I won't be able to test that soon (reverting recovery and ROM to cm13, reverting repartitioning too, then starting to trial and error).
But I believe that the safest way is to start from the moving to LOS14.1 - flashing the experimental and nightly first, as I guided. Then later flash emu-twrp recovery and proceed with rINanDO's instructions.
I'm afraid doing opposite (emu'ing first and then flash exp+nightly) might not work since Lanchon and the guys warned us that this emu-kernel might not work even with cm13 and maybe even affect it! Maybe repiting manually with Lanchon's magic REPIT would do, then migrate ROM, then change to new emu-recovery.
PLEASE:
- don't direct-link to recoveries that will brick your phone if installed too early.
- read the linked threads in the opening posts to understand the complexity of any of the changes
- if understood the consequences and you still want to do them all at once: know your limits
- if still feeling comfortable until here: go ahead *but do it in the correct order* or your phone will bootloop as all the newer test-recoveries were built with a Nougat ramdrive and thus will very very likely bootloop on your phone if installed on non-Nougat ROMs!
So my advice for your own safety: stay in your lane and read everything first.
EDIT: And by the way: please keep emulated storage discussions in the appropriate thread until it is officially tested and documented to be kind of noob-proof.
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed.
This rom is for both the Nook Tablet 512M/8GB and 1GB/16GB versions. The device code name is "acclaim".
Prerequisites:
A recovery. To install a recovery when coming from a stock device, you need to prepare a special SD card. Installation instructions can be found here on xda.
Installation:
Grab a new recovery (e.g. here https://dl.dropboxusercontent.com/u...cclaim-eng-recovery-UNOFFICIAL-20150606.0.img) and flash it with fastboot.
If you have a CM 10.1 or CM 11 installed, flash the new recovery and try the updater, otherwise download the zip from nightlies, boot to CWM and flash it.
Once a version is installed (and all bugs fixed), you will be able to use CM Updater
Settings->About tablet->CyanogenMod updates->Refresh
THE NEW NIGHTLIES HAVE EMULATED STORAGE ENABLED. YOU LOOSE ALL YOUR DATA. MAKE SURE YOU BACKUP!!!! THE INTERNAL EMMC 1GB PARTITION IS ALSO NOT ACCESSIBLE ANYMORE. COPY THE CONTENT. THE EXTERNAL SDCARD IS NOT USED ANYMORE AS PRIMARY STORAGE. ALL APP DATA ON THE SDCARD WILL BE LOST. I ALSO RECOMMEND TO WIPE.
BACKUP!
RE-PARTITIONING IS NOT MANDATORY. IF YOU WANT TO RECLAIM THE 1GB PARTITION (called media) YOU CAN TRY TO FOLLOW THE RE-PARTITION GUIDE:
https://docs.google.com/document/d/1wSAaAZfQcnvkiHKlbZ7_H1h67m2kx0mq-p3Wjgue3qA/edit?usp=sharing
PLEASE COMMENT ON THE DOCUMENT IF SOMETHING IS NOT CLEAR.
Building:
The CM wiki explains that here: http://wiki.cyanogenmod.org/w/Build_for_acclaim
Returning to stock BN firmware:
If you have installed above rom and the CWM recovery and you really hate it and want to go back to stock, you may wish to try to flash the original acclaim_update.zip from BN. You have to unzip that file and edit META-INF/com/google/android/updater-script. Drop the first two lines here:
assert(getprop("ro.product.device") == "blaze" ||
getprop("ro.build.product") == "blaze");
Zip the package again. Then go to recovery, flash the zip, wipe, and reboot.
Support:
For any issues encountered, please post into this forum, but add steps to reproduce and dmesg, logcat and audit.log information. If you don't know what this is or how to get them, try to find that out first before posting here.
Thanks:
hashcode, ntemis, kuzma30, fattire, mik_os, chrmhoffmann, and many others that contribute to cyanogenmod and especially this version.
kuzma30 - great kernel job
hashcode - we have reused lots of your work and effort for the various omap devices (esp kindle fire). It is thanks to you mainly that we are now official CM device. Also many thanks for the L bringup help.
mik_os - great touchscreen firmware flasher and other efforts
fattire - for helping us everywhere he can
ntemis - thanks for giving so much energy to this - esp for 4.4 and L I have copied lots of things from you
DISCLAIMER:
- update the CWM if you come from older versions - otherwise you'll see funny error messages when installing zip
- It is possible that you need to wipe your device. I did not do that, but...
- Also you must flash gapps. It can be found somewhere....
ATTENTION: IT SEEMS THAT DHACKER'S L GAPPS ARE TOO BIG TO FIT INTO THE SYSTEM PARTITION. Try to find a smaller one.
- The SELINUX policies are enforced now.
Known issues:
- system partition is too small for full gapps. use a mini gapp package.
- the touchscreen firmware flasher doesn't work on L. Use CM11 to flash it first.
Recently fixed:
- f2fs
- kernel updated to latest 3.0 stable
- developer settings and setup wizard (if you select backup) crash. that's fixed in nightly from 8-FEB-15.
- device encryption does work now (but who wants to do that? the device is laggy enough already )
- cmupdate / cm recovery: adb reboot recovery and cmupdater and auto install. Hopefully this is fixed now (not in nice way, but...). You need sdcard inserted to make this work (but I guess everybody has that anyway).
Get it from
http://download.cyanogenmod.org/?device=acclaim
Get ENG recovery from here. It allows to adb into recovery even when data is wiped.
File: https://dl.dropboxusercontent.com/u...cclaim-eng-recovery-UNOFFICIAL-20150606.0.img
md5sum: 6136fc49c5e9a32f115d40d762bb6f2d
Reserved
...
Amazing work Chris, Let the flashing begin.
Been waiting for this for quite a while! I can put off learning to build for another few months!
For gapps, I recommend TKRuzze's Gapps. (Just search for them on Google.) His Pico-Gapps package is pretty lightweight.
UPDATE: Couldn't flash with the provided recovery. I was able to flash it successfully using TWRP 2.8.4.0 though.
Hi,
Odd. I flashed the same (before uploading).
Did you upgrade recovery? Did you check md5 of download?
Chris
chrmhoffmann said:
Hi,
Odd. I flashed the same (before uploading).
Did you upgrade recovery? Did you check md5 of download?
Chris
Click to expand...
Click to collapse
ROM: 78f32eb89778b31a569644b21fc1e8f3
Recovery: d37f29808a682e7806fa7b77dc940453
Installed just fine here, even Netflix works!!
thanks for everyone's hard work.
topdawg7793 said:
Been waiting for this for quite a while! I can put off learning to build for another few months!
For gapps, I recommend TKRuzze's Gapps. (Just search for them on Google.) His Pico-Gapps package is pretty lightweight.
UPDATE: Couldn't flash with the provided recovery. I was able to flash it successfully using TWRP 2.8.4.0 though.
Click to expand...
Click to collapse
Can you share where you got the download for twrp 2.8.4.0? Thanks!
Sent from my LG-E970 using XDA Free mobile app
billy8362 said:
Can you share where you got the download for twrp 2.8.4.0? Thanks!
Sent from my LG-E970 using XDA Free mobile app
Click to expand...
Click to collapse
http://techerrata.com/browse/twrp2/acclaim
Download the latest version, rename it to "recovery.img". Flash it in fastboot.
If you'd rather not go that route, download a flashable of an older version of TWRP, use 7zip to delete the recovery.img in that folder, then move this new TWRP into that folder. Then flash that.
topdawg7793 said:
Been waiting for this for quite a while! I can put off learning to build for another few months!
For gapps, I recommend TKRuzze's Gapps. (Just search for them on Google.) His Pico-Gapps package is pretty lightweight.
UPDATE: Couldn't flash with the provided recovery. I was able to flash it successfully using TWRP 2.8.4.0 though.
Click to expand...
Click to collapse
Hi,
Can you provide /tmp/recovery.log for those who can't flash with that provided recovery?
Chris
Installed with latest TWRP. ROM working fine, no random reboots. Have some troubles with SDcard: unmounting ok, formating, mounting, detecting not working.
Update:
All ok after i format 10+11 partitions.
chrmhoffmann said:
Hi,
Can you provide /tmp/recovery.log for those who can't flash with that provided recovery?
Chris
Click to expand...
Click to collapse
Too busy to play with my Nook this week. I recall it was having issues with signature verification. I wasn't able to locate a way to disable signature verification.
Pepe.II said:
Installed with latest TWRP. ROM working fine, no random reboots. Have some troubles with SDcard: unmounting ok, formating, mounting, detecting not working.
Click to expand...
Click to collapse
Same issue here ... used TWRP ... everything seems to work except I don't have an SD card ... which is a deal breaker for this tablet.
UPDATE: Used the wrong GAPPS the first time ... working fine now ... sluggish, but nothing seems to be broken ... and I didn't do a factory reset ... just cache/davlik cache clear then flash
Get ready for Bexus-L
Kickass! Thank you to every dev who made it possible for Android L to be on NT!
Question: is it absolutely mandatory to install Google's crapware Gapps? I use F-Droid on all my other Android devices. They run much lighter.
---------- Post added at 10:47 PM ---------- Previous post was at 10:23 PM ----------
Edit: It works without Gapps. Also, bug found: if you enable development settings, when you tap on developer options, it says "Unfortunately, Settings has stopped"
Edit2: Kodi (XBMC) for Android does not work. Says "Cannot parse CPU features." Didn't happen on CM11.
Tell me more about this F-Droid ... what does it gain me over GAPPs? Performance?
sagirfahmid3 said:
Kickass! Thank you to every dev who made it possible for Android L to be on NT!
Question: is it absolutely mandatory to install Google's crapware Gapps? I use F-Droid on all my other Android devices. They run much lighter.
---------- Post added at 10:47 PM ---------- Previous post was at 10:23 PM ----------
Edit: It works without Gapps. Also, bug found: if you enable development settings, when you tap on developer options, it says "Unfortunately, Settings has stopped"
Edit2: Kodi (XBMC) for Android does not work. Says "Cannot parse CPU features." Didn't happen on CM11.
Click to expand...
Click to collapse
jerrygarcia4295 said:
Tell me more about this F-Droid ... what does it gain me over GAPPs? Performance?
Click to expand...
Click to collapse
Google's apps come with Google's playstore, sync services, etc, which add overhead to wi-fi and CPU cycles.
F-droid doesn't have those services. It's pretty much like a Linux package manager--you use it to install and keep track of open source packages.
Besides, I only use my phones and tablets for Kodi and phone calls. I'm not into Google Hangouts or YouTube, etc. I don't take pictures, I don't use the GPS...
IMO, I find Android to be completely useless. I wish there was a completely open source and open hardware Linux running phone. With Linux, you can do whatever you want.
I had to go back to CM11 ... superuser appears to be broken when I go to CM12 ... is there a fix for this?
jerrygarcia4295 said:
I had to go back to CM11 ... superuser appears to be broken when I go to CM12 ... is there a fix for this?
Click to expand...
Click to collapse
I haven't installed cm12 on my nook tablet yet, but on other cm12 installs, you have to enable superuser in Settings / Developer options / Root access. Click one of the boxes other than the default "Disabled". If that doesn't work, some folks swear by SuperSU, which you can find in the Play Store
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include "std_disclaimer.h"
/*
* Your warranty is not void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit Gerrit Code Review.
Wiki
Official CyanogenMod Wiki:https://wiki.cyanogenmod.org/w/Mako_Info
Installation
First time CyanogenMod 14.1 installation on your Nexus 4:
Read the official Wiki page
Unlock your bootloader if you haven't done so already
Flash a custom recovery via Fastboot
Push GApps (arm) and the CM 14.1 zip to your device
Boot into Recovery
Perform factory reset
Flash the CM 14.1 zip from SD card
Flash GApps from SD card
Reboot
Upgrading from earlier version of CyanogenMod (even from 13.0) :
Push the new CM 14.1 zip to your SD card
Boot into Recovery
Flash the CM 14.1 zip from SD card
Flash the most recent GApps for 7.1 if you are upgrading from earlier android version
Reboot
Downloads
Lastest Nightly 14: http://get.cm/get/mako-latest.zip
Lastest Recovery (Nightly) : http://get.cm/get/mako-latest-recovery.img
Lastest Snapshot : http://get.cm/get/mako-snapshot.zip
Lastest Recovery (Snapshot) : http://get.cm/get/mako-snapshot-recovery.img
-----------------------------------------------------------------------------
Google Apps (arm): wiki.cyanogenmod.org/w/gapps
All the builds: http://download.cyanogenmod.org/?device=mako
Code:
Phone Informations
* CM version
* Gapps version
What you did:
* Wipe data: y/n
* Upgrade from previous official cm build: y/n
* Restore with titanium backup: y/n
You're using (if yes write which one) :
* Task killer
* Phone cleaner / Battery enhancer apps
* Non-stock kernel
* Modified kernel settings
* Other mods
Bug info:
* Last version it worked on
* Repro steps
F.A.Q.
ROOT! ROOT! Give me root or i'll die!!! Where root is???
First of all DO NOT flash any SuperSu/SuperUser/SuperMan zip package to get root. Go to Settings>Developement Settings>Root access and select "Apps Only"
Why no nightly today?
Build failed. Check again tomorrow
When do I have to wipe data?
You must wipe data only when you're switching from another rom or migrating to Snapshot branch from Nightly and vice versa. You don't need to wipe data when you update in the same release channe (this applies to 13.0 -> 14.1 upgrades too)
Will you add <insert awesome feature here>?
I won't. If you write it, submit a commit to gerrit, where it will be reviewed.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Contributors
cyanogen, CM team
Source Code: https://github.com/cyanogenmod
Oh, finally.
God bless CM.
What about buglist?
Hi,
how it is possible to install SuperSU? some app, for example adaway don't work with superuser
pincher65 said:
Hi,
how it is possible to install SuperSU? some app, for example adaway don't work with superuser
Click to expand...
Click to collapse
For adaway flash systemless hosts first and then it will work with superuser
pincher65 said:
Hi,
how it is possible to install SuperSU? some app, for example adaway don't work with superuser
Click to expand...
Click to collapse
For me adaway works just fine with built in superuser.
I'm on stephanmc latest build.
Does anyone have information about the GPU driver used, is it the Developer Preview from Flo or did CM come up with some magic?
No CAF?
g33k0 b3lk0w said:
For adaway flash systemless hosts first and then it will work with superuser
Click to expand...
Click to collapse
systemless it is SuperSU, superuser - system app. cm 14.1 use superuser (system app) why you suggest to flash zip for the unsystem app? it won't work. earlier it was possible not including superuser in options of the developer to flash SuperSU. here it is impossible
tom0769 said:
For me adaway works just fine with built in superuser.
I'm on stephanmc latest build.
Click to expand...
Click to collapse
why you answer here? см by stephanmc here
Can anyone please share how it works or if there are any important bugs?
pincher65 said:
systemless it is SuperSU, superuser - system app. cm 14.1 use superuser (system app) why you suggest to flash zip for the unsystem app? it won't work. earlier it was possible not including superuser in options of the developer to flash SuperSU. here it is impossible
why you answer here? см by stephanmc here
Click to expand...
Click to collapse
It reall, works with superuser just try it two times and it will work
I tested ROM from stephanmc and cm-14.1-20161126-EXPERIMENTAL.
ROM from stephanmc better appearance, but the battery decreases rapidly , cm-14.1-20161126-EXPERIMENTAL still needs refine.
pincher65 said:
why you answer here? см by stephanmc here
Click to expand...
Click to collapse
Simply because it's working on cm14.1, and you asked here
g33k0 b3lk0w said:
It reall, works with superuser just try it two times and it will work
Click to expand...
Click to collapse
what "to make two times"? to read your post? flash systemless zip?
everything has appeared simply: it is necessary to download the last adaway 19.11.2016, it works with the app superuser
tom0769 said:
Simply because it's working on cm14.1, and you asked here
Click to expand...
Click to collapse
if I had had problems with his ROM, I would ask a question in that thread
pincher65 said:
what "to make two times"? to read your post? flash systemless zip?
everything has appeared simply: it is necessary to download the last adaway 19.11.2016, it works with the app superuser
if I had had problems with his ROM, I would ask a question in that thread
Click to expand...
Click to collapse
I use the old adaway just after i press to activate it and it says failed, i press activate again and it works
g33k0 b3lk0w said:
I use the old adaway just after i press to activate it and it says failed, i press activate again and it works
Click to expand...
Click to collapse
included three times, flash two - hasn't earned. after installation of new apk everything works.
good luck to you.
Why is the limitation on SuperSu? Why can't we use that?
Hey, does this ROM's default kernel come with color control? Or could anyone suggest such a kernel? I've tried hellspawn but the performance was abysmal for me.
manikandanguru said:
Why is the limitation on SuperSu? Why can't we use that?
Click to expand...
Click to collapse
Why in this Rom systematically there is "SU" files? I don't want root because I Have to erase these files to install correctly the app [email protected] for my job. Otherwise i can't connect my k920 on my job network.... Root files is rejected!
FYI: Anyone formerly using F2FS having bootloops... Must format /data and /cache back to ext4 otherwise CM14.1 won't complete booting.
I can't give root access to my Nexus 4, it's install fine, but when the device start, it has a boot loop when it shows the start desktop. Restarting to the end of times.
Edit: FYI, i'm using last version of TWRP and SuperSU-v2.46.zip
Sorry for my english, but i speak spanish.
Greetings from Chile
Lineage is a free, community built, aftermarket firmware distribution of Android 7.1.1 (N), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Lineage is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Everything except in BUGS/Not working list
BUGS/Not working :
Offline charging doesn't work
STK hangs after choosing a subscription in the menu
Front camera displays 0,3MP instead of 2MP
First time installing LineageOS 14.1 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
NOTE: First boot might take long time, due to deodexed build, so don't consider bootloop!!
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
DOWNLOADS:
Click to expand...
Click to collapse
BETA-4: Drive link
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
LineageOS 14.1, ROM for the Samsung Galaxy Core Prime
Contributors
remilia15
Source Code: https://github.com/remilia15/android_device_samsung_core33g/tree/cm-14.1
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.4
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 3
Beta Release Date: 2017-04-08
Created 2017-04-08
Last Updated 2018-06-15
CHANGELOG
BETA-1:
Initial LineageOS 14.1 release
BETA-2: Post #25
BETA-3: Post #230
BETA-4: Post #365
Frequently Asked Questions
Taken originally from @doesntexits
Q: ROM startup too slow?
A: Nope, just because you haven't done a factory reset before installing the ROM
Q: Dead touchscreen?
A: Wrong installation method leads to this problem. Before restoring to stock through Odin, go to recovery mode (TWRP highly recommended), wipe everything in the Wipe section >> Advanced wipe (tick all system, data, cache, but not other storages, no need wiping dalvik/ART cache, as it already done by wiping data), then go to Download mode, restore stock, install custom recovery again and then, install the ROM you want
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G360HU
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, you can
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow, and now it's Nougat
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in this ROM? I don't see it in Storage settings
A: This feature has been moved to Developer settings since Marshmallow, and will reset to default (Charging) after everytime you unplug your USB (due to security reasons). Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging" or "USB is connected"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Q: My phone is slow as snail after installing ROM. I've tried restoring stock and do formattings but no help?
A: I have answered this question. See this post: Link
Thanks @remilia15
Thread bookmarked
Thanks
Awesome @remilia15 thanks
WOW we have got a LOS 14.1
you are awesome
Finally N for our device. Yay. Thanks OP
Fix for home button not working
So I managed to fix the home button not working bug.
Extract the contents of the attached zip file into your /system/usr/keylayout and change the permissions of each file to 644 if they are not 644 already. Then a reboot should fix the problem.
Now searching for quick fix of camera.
For older releases, use patch below by [email protected] for those bug fixes.
Or flash newer release like Beta-2.
Any custom kernel works?
FIX for bugs
listed things are fixed
camera [photo&video]
Flac audio codec
home button
volume [increased]
flash the zip and do a factory reset
DOWNLOAD
[email protected] said:
listed things are fixed
camera [photo&video]
Flac audio codec
home button
volume [increased]
flash the zip and do a factory reset
DOWNLOAD
Click to expand...
Click to collapse
Why still do factory reset? I just flashed and reboot works fine.
mmmmmmm Thanks for it
What about battery drain ????
Nice! Downloading, will test tonight.
Sent from Vietnam
Thank you
Q: How to use adoptable storage feature? I see it's new in Marshmallow
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings @remilia15
Lol !
we are here in Nougat Not Marshmallow
Thanks to all Contributor to build this Lineage Os For G360H, At least we got it :good:@[email protected] fixed the many bugs of Beta-1 so Please update Beta Version and Bug list @remilia15
Whats about Battery drain issue? Who already Install this Rom please review it,
Thanks you
adamh.ayyad said:
Q: How to use adoptable storage feature? I see it's new in Marshmallow
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings @remilia15
Lol !
we are here in Nougat Not Marshmallow
Click to expand...
Click to collapse
Mtp is currently having problems.
Sent from my SM-G360H using Tapatalk
---------- Post added at 07:00 AM ---------- Previous post was at 07:00 AM ----------
noman6999 said:
Thanks to all Contributor to build this Lineage Os For G360H, At least we got it [emoji14] :good:@[email protected] fixed the many bugs of Beta-1 so Please update Beta Version and Bug list @remilia15
Whats about Battery drain issue? Who already Install this Rom please review it,
Thanks you
Click to expand...
Click to collapse
Battery drain is common so just ignore it lol.
Sent from my SM-G360H using Tapatalk
SupulEdirisinghe said:
Mtp is currently having problems.
Sent from my SM-G360H using Tapatalk
Its working with me
Click to expand...
Click to collapse
@remilia15
Nice job my little sister
Anyway, I hope @AtomR saw this thread
It has been a very long time since my last post on XDA. I've been so busy with my job, and haven't got time to visit here
How are you guys all going?
HTML:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Flashing Instruction:
1. Make sure you got the latest firmware installed (LMY48T)
2. Backup all your data (Important)
3. Wipe system, data and cache.
4. Flash the ROM and Gapps
5. Reboot
Downloads:
https://download.lineageos.org/mako
Gapps:
https://wiki.lineageos.org/gapps.html
TWRP:
https://twrp.me/lg/lgnexus4.html
Extras (Su Addon):
https://download.lineageos.org/extras
Sources:
https://github.com/LineageOS/android_device_lge_mako
https://github.com/LineageOS/android_kernel_lge_mako
Changelog:
https://www.cmxlog.com/15.1/mako/
Bug Reporting:
https://jira.lineageos.org
Important notes:
- You must use TWRP 3.2.0.0 or higher to flash this rom!
- Remember that no bug reporting are accepted if you using root and/or custom kernel!
XDA:DevDB Information
LineageOS 15.1, ROM for the Google Nexus 4
Contributors
voron00
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-05-07
Last Updated 2018-05-07
I can't install gapps, help!
Only pico gapps can be installed, if you still unable to install pico gapps
create a .txt file named gapps-config.txt with the following contents:
Code:
Exclude
GoogleTTS
and copy that file to the root of your /sdcard, after that install pico gapps.
Recommended gapps-config for opengapps nano (with faceunlock support):
Code:
Exclude
GoogleTTS
Search
Speech
Upgrading from 14.1? Read this!
Android 8.1 is noticably bigger than previous version and directly flashing 15.1 over 14.1
is only possible when you got no gapps or pico gapps installed. If you used for example nano gapps
the correct steps of upgrading would be:
- Boot into Recovery
- Wipe system and cache
- Flash LineageOS zip
- Flash Gapps Pico
- Reboot
LineageOS + MicroG
Interesting!
You can not see ROM.zip now at https://download.lineageos.org/mako
and there is a version from MicroG at https://download.lineage.microg.org/mako :good:
FIRST to comment at this legendary thread! Thanks to the developers who initially made unofficial build, changed it to official, and opted to maintain this old device!
By the way, will the build be posted on the LinageOS official website soon? I still can't see it...
thanks voron00 for your work...
download link only shows 14.1 LOS...
d_g_m_2000 said:
thanks voron00 for your work...
download link only shows 14.1 LOS...
Click to expand...
Click to collapse
It's not built yet, but it's in the queue.
You can always check the build status on lineageoslog dot com (I'm not allowed to post external links because I don't have enough posts).
Holzhacker said:
It's not built yet, but it's in the queue.
You can always check the build status on lineageoslog dot com (I'm not allowed to post external links because I don't have enough posts).
Click to expand...
Click to collapse
Why not check the build queue here: https://jenkins.lineageos.org/job/android?
89.4MB for this rom? is that light?
-- comment deleted--
lineage-15.1-20180507-nightly-mako-signed.zip
d_g_m_2000 said:
89.4MB for this rom? is that light?
-- comment deleted--
Click to expand...
Click to collapse
when you gonna try download, it gonna be 327MB
Downloaded and flashed with the pico open gapps. So far working perfectly. Thank you very much voron00
Hm, automatic LiveDisplay doesn't seem to be working for me, I'm fairly sure it did on unofficial builds. I'll have to check back on this.
n0b0dy666 said:
Hm, automatic LiveDisplay doesn't seem to be working for me, I'm fairly sure it did on unofficial builds. I'll have to check back on this.
Click to expand...
Click to collapse
Works for me. I think night mode time now from 21:00 to 3:00 fo rsome reasons.
voron00 said:
Works for me. I think night mode time now from 21:00 to 3:00 fo rsome reasons.
Click to expand...
Click to collapse
I'll perform some additional tests and get back to you. For some reason it didn't automatically turned the night mode on. Manually switching between modes work though.
Ah, great the party started already!
Sent from my OnePlus 3T using XDA Labs
I did a clean flash today with the first official LOS15.1 including pico gapps and magisk 16.0 and everything went without a glitch.
The only issue I have is installing Adaway (Fdroid installed just fine): Adaway is greyed out in the Fdroid app whereas I could install it on my Nexus 6.
What is the trick to be able to install Adaway?
fahrer17 said:
I did a clean flash today with the first official LOS15.1 including pico gapps and magisk 16.0 and everything went without a glitch.
The only issue I have is installing Adaway (Fdroid installed just fine): Adaway is greyed out in the Fdroid app whereas I could install it on my Nexus 6.
What is the trick to be able to install Adaway?
Click to expand...
Click to collapse
You can use the XDA adaway version directly: https://www.androidfilehost.com/?fid=673956719939825702
I get an FC when I try to open settings, system, buttons...
Log attached
https://drive.google.com/file/d/1FUKefen_oyVxjBQCOuS1lvGLHZ1H-G_s/view?usp=drivesdk
Edit: I do use magisk, so I totally understand when you choose to ignore this...
Edit2: just checked and it also FC's without magisk being present, just couldn't take a log as Matlog needs root and I'm not near a computer, I however didn't clean flash, I updated as suggested by OP (wipe all but internal storage & data)
Edit3: from my observations, when changing overlays in settings, display, advanced the buttons page starts to appear for a second and then crashes - I assume it's an overlay issue, as seen so many times by substratum... Even though the log complains about lineage parts right before the fatal exception but anyway I'm terrible at reading logs..
Sent from my Nexus 4 using XDA Labs
Have a problem now with Sberbank Online app - it now detects this ROM as modified or rooted (didnt install su addon) and works in restricted mode. With previous builds of 14.1 (inc. the last one) it works normally like with stock rom.
Upd: I've send them an e-mail asking to add this rom in the whitelist.
Also, now phones wi-fi can't detect my 5Ghz network for some reason. Didnt change any settings on my router since 14.1 builds.
accuphase said:
You can use the XDA adaway version directly: https://www.androidfilehost.com/?fid=673956719939825702
Click to expand...
Click to collapse
Thank you! When using this do I get automatic updates?
The reason I ask: I could download some AdAway apk's directly from F-Droid but I wouldn't get any update notifications: https://f-droid.org/en/packages/org.adaway/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
brought to you by the
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
About /e/
/e/ is an a mobile ecosystem (ROM + onlines services) that:
is open source
is pro-privacy
is compatible with most existing Android applications
cares about usability
is as far as possible freed from shackles by Google and OEMs
already exists!
It’s the alternative to the Apple/Google duopoly on the smartphone.
... so again and just to be clear: /e/ is not just a ROM, it is more a complete privacy ecosystem and consists of:
an installable mobile operating system for smartphones, which is forked from Android and strongly “ungoogled”
a set of sorted and improved default open source applications
various online services that are linked to the mobile operating system, such as: a meta search engine for the web, drive (with synchronization), mail, calendar, notes, tasks.
Features
Based on the stable Lineage OS
microG fully pre-installed with Signature Spoofing in restricted mode!
All features described on the /e/ page: What is e
All features and fixes of LineageOS
My builds come with full OTA update support
... you know that thing which informs you that a new update is there and where you just click to download + install
Difference from pure /e/ or: why are the builds UNOFFICIAL?
There are no differences. its pure /e/. "just" build on my server
Known issues:
Keep in mind that this is brand new stuff so it may (still) contain unknown issues!
So back up regularly and frequently!
Camera does work but only for photo, i.e. video recording fails.
If you find a bug not listed let me know and SHARE LOGS! -> READ FAQ#1 for how to provide proper logs.
Requirements
Latest TWRP or SHRP (recommended) build.
Do a full (i.e. Nandroid) backup before doing anything!
Samsung STOCK firmware should be on T285XXU0AQH1.
You can check your current firmware version in Android -> settings -> About / Phone info -> Baseband version
If you like try first without flashing this firmware but if you encounter any issues upgrade to this version first before reporting
Fast and (afaik) good site for downloading: https://sfirmware.com/samsung-sm-t285/
(scroll down and type T285XXU0AQH1 in the search box, choose the one for your country, download, flash as usual, flash TWRP/SHRP again, flash this ROM)
Installation
Full clean install as described here (FAQ #2) is highly recommended. DO NOT REPORT ISSUES when you have skipped that step!
Flash /e/
Optional (if you want root): Flash Magisk
Flashing OpenGapps ????? STOOOOOOP! NO No no! you don't want that on a google-free phone! /e/ contains everything you need to live without Google! So flashing OpenGapps on /e/ is like using a bit more secure LOS but that's not the point of /e/. Either try without or go with LOS (imho).
Boot it (will take a bit on first boot!!! be patient!)
Enjoy the most easiest way to have a privacy focused and google-free phone!
Download
Get your builds from my leech server (new installs or re-installs)
http://leech.binbash.rocks:8008/e-os/nougat/gtexslte/
If you have a previous version of my(!) /e/ ROM installed already and just want to update to a newer release:
Android settings -> Updater (yes my builds have built-in OTA support!)
Note:
Builds are updated as soon as possible. There is no build cycle.
Information pertaining to your device is displayed accordingly.
The current build is the latest for your device.
Changelogs
search results from this thread: click
Support
Of course in this thread but also by Telegram.
I have created a generic group for all stuff around Android : here
and another one if you want to keep up2date whenever I build something (TWRP, SHRP, LOS, /e/, ...): here
Credits
jedld, really he did a great job and making this project possible at first!
LineageOS (the base of /e/)
The /e/ foundation and all related devs making this experience possible!
and all I forgot to mention ....!
Sources
build manifest
XDA:DevDB Information
gtexslte_eos-n_unofficial, ROM for the Samsung Galaxy Tab A series
Contributors
steadfasterX, jedld(!)
Source Code: https://gitlab.e.foundation/e
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Beta
Created 2020-11-18
Last Updated 2020-11-18
FAQ
Frequently Asked Questions (FAQ)
Q #01: I want to report an issue. What is the proper way to do so?
I'm glad that you are asking: before doing so check the KNOWN ISSUES topic in the OP and ofc the other FAQ's listed here!
if you have an audio issue follow FAQ #6 instead.
If your issue is not listed there click here to proceed:
If your issue is not listed there follow the directions here briefly and I may can fix it:
logcat GUIDE
Ensure you have done a full CLEAN install before doing so (refer to FAQ #2 for what that means).
Warning: NO SUPPORT when:
- magisk is installed (known to cause issues sometimes - regardless of the ROM or version)
- Xposed is installed (known to cause issues sometimes - regardless of the ROM or version)
If you have installed any of these UNINSTALL or better do a FULL CLEAN install (see FAQ #2) before doing anything else. Often enough these above causes several issues like battery draining, problems on booting and much more. Even when they may work properly you should re-produce your issue without them first and follow the above to grab the log.
Magisk is a great piece of software and besides that it is Open Source which SuperSu never was.
I just saying I do not "support" issues when you have Magisk installed. Why? It is (like Xposed) extendable with modules (made by whoever) and those can cause billions of issues.
Other then that magisk was sometimes the reason for battery drain etc. Magisk modifies the boot "process" and sits very deep in the system (which is needed to make it work ofc) but that has the potential to make a system/ROM unstable or result in strange behaviors.
so in order to support a specific issue I have to be sure the ROM is in a "clean" state, no magisk, no xposed.
Pro-Tip: a very first test is to set magisk on core functions only to see if an extension causes your issue or not.
Q #02: I want to install clean, how? What is a clean install? What is the recommended way to flash a new ROM version?
A clean install ensures that there are no leftovers from any previous install. One can say that there are 2 phases of a clean flash:
1) regular
2) full - when you (still) encounter issues
Usually the regular one is fully ok when flashing a new ROM version but if you encounter strange issues nobody else is reporting or if a release post is recommending it you should do a full clean install instead.
A regular clean install can be done like this:
WIPE -> Advanced -> select: System + Cache
Flash the ROM
reflash root addon/magisk if you want root
A full clean install needs 2 steps more then the regular:
follow the steps for regular clean
go back in WIPE -> touch the "FORMAT data" button and type "yes" to format the internal storage (you will LOOSE ALL YOUR DATA - obviously)
REBOOT -> Recovery
Flash the ROM
reflash root addon/magisk if you want root
It is absolutely recommended to create a backup before and COPYING IT to your PC(!) before doing the above.
Q #03: Are there any plans or a chance of official /e/ builds?
No plans on my site. I may check that later but the chance is very low.
Q #04: Will this ROM support / pass SafetyNet?
When you install Magisk you can hide and so yes you might be able to pass SafetyNet. Which can change every day though because even when that might work atm you should note the following:
Magisk has its own protections to ensure you pass safetynet but this is something which will change one day and there is no known method yet to workaround that.
Q #5: Is there an /e/ specific FAQ?
Sure:
FAQ: click
Forum: click
HOWTOs: click (a great resource for all your first questions)
Q #6: issues with audio (e.g. echo's, silence on one or the other site, ..)? Read here how to provide a specific log for that:
Do the following steps:
1) Ensure you have adb set up on your PC, and have adb debugging and adb root enabled in developer options on your phone
2) Then perform the following (all one command)
On Linux:
adb root ; adb shell "stop audioserver; logcat -c -b all; start audioserver" && sleep 10 && adb logcat -b all |egrep -vi "(dialer|telecom|ril|gsm|touch|brightn|dct|QC-time-services|SST|sensors|AlarmMan|Lights|perfp)"
Click to expand...
Click to collapse
On windows:
adb root ; adb shell "stop audioserver; logcat -c -b all; start audioserver && sleep 10 && logcat -b all |egrep -vi '(dialer|telecom|ril|gsm|touch|brightn|dct|QC-time-services|SST|sensors|AlarmMan|Lights|perfp)' "
Click to expand...
Click to collapse
3) Then re-produce your audio issue and cancel the logcat from step 2 before hanging up!
4) Share the logcat output from the console screen using paste.omnirom.org
Q #7: I'm scared about that microG , I don't want to expose my phone so is this /e/ version a security risk?
First of all you need a lot of trust installing ANY custom ROM. A developer can do nasty things right? Besides that yes microG allowing to let apps act like as they are another app, also known as signature spoofing. This CAN be a good and a bad thing. Read on why my builds are different:
In general the microG patch is an all or nothing. A ROM which supports microG (i.e. signature spoofing) have that feature enabled, always.
The difference in my /e/ builds is that I am using the "restricted" option of signature spoofing so as long as you trust me you are as safe as without microG.
.-
steadfasterX said:
Frequently Asked Questions (FAQ)
Q #01: I want to report an issue. What is the proper way to do so?
I'm glad that you are asking: before doing so check the KNOWN ISSUES topic in the OP and ofc the other FAQ's listed here!
if you have an audio issue follow FAQ #6 instead.
If your issue is not listed there click here to proceed:
If your issue is not listed there follow the directions here briefly and I may can fix it:
logcat GUIDE
Ensure you have done a full CLEAN install before doing so (refer to FAQ #2 for what that means).
Warning: NO SUPPORT when:
- magisk is installed (known to cause issues sometimes - regardless of the ROM or version)
- Xposed is installed (known to cause issues sometimes - regardless of the ROM or version)
If you have installed any of these UNINSTALL or better do a FULL CLEAN install (see FAQ #2) before doing anything else. Often enough these above causes several issues like battery draining, problems on booting and much more. Even when they may work properly you should re-produce your issue without them first and follow the above to grab the log.
Magisk is a great piece of software and besides that it is Open Source which SuperSu never was.
I just saying I do not "support" issues when you have Magisk installed. Why? It is (like Xposed) extendable with modules (made by whoever) and those can cause billions of issues.
Other then that magisk was sometimes the reason for battery drain etc. Magisk modifies the boot "process" and sits very deep in the system (which is needed to make it work ofc) but that has the potential to make a system/ROM unstable or result in strange behaviors.
so in order to support a specific issue I have to be sure the ROM is in a "clean" state, no magisk, no xposed.
Pro-Tip: a very first test is to set magisk on core functions only to see if an extension causes your issue or not.
Q #02: I want to install clean, how? What is a clean install? What is the recommended way to flash a new ROM version?
A clean install ensures that there are no leftovers from any previous install. One can say that there are 2 phases of a clean flash:
1) regular
2) full - when you (still) encounter issues
Usually the regular one is fully ok when flashing a new ROM version but if you encounter strange issues nobody else is reporting or if a release post is recommending it you should do a full clean install instead.
A regular clean install can be done like this:
WIPE -> Advanced -> select: System + Cache
Flash the ROM
reflash root addon/magisk if you want root
A full clean install needs 2 steps more then the regular:
follow the steps for regular clean
go back in WIPE -> touch the "FORMAT data" button and type "yes" to format the internal storage (you will LOOSE ALL YOUR DATA - obviously)
REBOOT -> Recovery
Flash the ROM
reflash root addon/magisk if you want root
It is absolutely recommended to create a backup before and COPYING IT to your PC(!) before doing the above.
Q #03: Are there any plans or a chance of official /e/ builds?
No plans on my site. I may check that later but the chance is very low.
Q #04: Will this ROM support / pass SafetyNet?
When you install Magisk you can hide and so yes you might be able to pass SafetyNet. Which can change every day though because even when that might work atm you should note the following:
Magisk has its own protections to ensure you pass safetynet but this is something which will change one day and there is no known method yet to workaround that.
Q #5: Is there an /e/ specific FAQ?
Sure:
FAQ: click
Forum: click
HOWTOs: click (a great resource for all your first questions)
Q #6: issues with audio (e.g. echo's, silence on one or the other site, ..)? Read here how to provide a specific log for that:
Do the following steps:
1) Ensure you have adb set up on your PC, and have adb debugging and adb root enabled in developer options on your phone
2) Then perform the following (all one command)
On Linux:
On windows:
3) Then re-produce your audio issue and cancel the logcat from step 2 before hanging up!
4) Share the logcat output from the console screen using paste.omnirom.org
Q #7: I'm scared about that microG , I don't want to expose my phone so is this /e/ version a security risk?
First of all you need a lot of trust installing ANY custom ROM. A developer can do nasty things right? Besides that yes microG allowing to let apps act like as they are another app, also known as signature spoofing. This CAN be a good and a bad thing. Read on why my builds are different:
In general the microG patch is an all or nothing. A ROM which supports microG (i.e. signature spoofing) have that feature enabled, always.
The difference in my /e/ builds is that I am using the "restricted" option of signature spoofing so as long as you trust me you are as safe as without microG.
.-
Click to expand...
Click to collapse
Very nice job. Looking awesome:good:
Everything is ok except some problems/issues.
First is the camera. As you have said, camera does work but only for photo. But it only happens on the foundation.e.camera (default camera app). And in other apps require camera such as Qanda, it does not work. Like this:
The second problem is the cellular (or phone signal) problem. It says that "Emergency calls only" and I can't use mobile data(4g) or make any phone calls.
The next one is stability. Sometimes Espeak have fc (force-close) after using camera app.
and sometimes Bliss launcher (pre-installed) have some fc when i press home button.
Sorry if I can't provide to you the proper log because of some reasons.
Anyways, the rom works very well and actually better than the LOS i used before.
Without Google spyware, The performance increases and i have more ram to do other things.
I hope you will fix those issues i have mentioned above in future OTA updates.
Thank you for the nice work.
espeak is a known issue of /e/ OS and should be fixed hopefully anytime soon: https://gitlab.e.foundation/e/backlog/-/issues/1890
cam is nothing I will work on sorry..
signal issue is very likely because of your STOCK firmware --> make a screenshot of the full " about" menu in settings (where you see build number etc)
Can I encrypt /data partition like in the Settings > Encryption > Encrypt phone
and Encrypt SD Card with this ROM?
Also, how stable it is for daily driver/use?
Did you fix the mic routing issue when in call? Use earphone mic instead of the built in mic of the tablet?
How about the video when app like Element.io or some other video conferencing apps?
steadfasterX said:
espeak is a known issue of /e/ OS and should be fixed hopefully anytime soon: https://gitlab.e.foundation/e/backlog/-/issues/1890
cam is nothing I will work on sorry..
signal issue is very likely because of your STOCK firmware --> make a screenshot of the full " about" menu in settings (where you see build number etc)
Click to expand...
Click to collapse
Here are some screenshots
This one is from "about tablet" menu.
And I bonus some screenshots include some information i have from the "Device info HW" app (ru.andr7e.deviceinfohw, maybe you've already known it before).
That's all the screenshot i provided.
GAPS does not work. I'm using the open_gapps-arm-7.1-nano-20170503.zip version
ijlara said:
GAPS does not work. I'm using the open_gapps-arm-7.1-nano-20170503.zip version
Click to expand...
Click to collapse
Uhm.. Maybe read the OP again??
Sorry ... I really read it and ended up forgetting that GAPS doesn't work ....
johnnyhoang said:
Everything is ok except some problems/issues.
First is the camera. As you have said, camera does work but only for photo. But it only happens on the foundation.e.camera (default camera app). And in other apps require camera such as Qanda, it does not work. Like this:
The second problem is the cellular (or phone signal) problem. It says that "Emergency calls only" and I can't use mobile data(4g) or make any phone calls.
The next one is stability. Sometimes Espeak have fc (force-close) after using camera app.
and sometimes Bliss launcher (pre-installed) have some fc when i press home button.
Sorry if I can't provide to you the proper log because of some reasons.
Anyways, the rom works very well and actually better than the LOS i used before.
Without Google spyware, The performance increases and i have more ram to do other things.
I hope you will fix those issues i have mentioned above in future OTA updates.
Thank you for the nice work.
Click to expand...
Click to collapse
ok your cell service issue could come from a too old stock firmware. yours is from 2016 and there were some releases later on.
I have adjusted the OP with instructions (pls see topic "Requirements") with the firmware I am using without issues.
.-
It is difficult to find a ROM that works well on this device. It is for my daughter and I also can't get a ROM that works with Samsung's Kids Mode.
steadfasterX said:
ok your cell service issue could come from a too old stock firmware. yours is from 2016 and there were some releases later on.
I have adjusted the OP with instructions (pls see topic "Requirements") with the firmware I am using without issues.
.-
Click to expand...
Click to collapse
i have tried so many ways. And it is not working after all.
installed T285XXU0AQH1 baseband from the BTU csc , but the cell service issues still happening.
my original csc is XXV, and the latest update still T285XXU0API1 baseband (20171115 ver.)
johnnyhoang said:
i have tried so many ways. And it is not working after all.
installed T285XXU0AQH1 baseband from the BTU csc , but the cell service issues still happening.
my original csc is XXV, and the latest update still T285XXU0API1 baseband (20171115 ver.)
Click to expand...
Click to collapse
uhm.. well that was not what I said. I did not say "install the baseband" I said install the FULL(!!!!!) STOCK firmware. Here again:
Samsung STOCK firmware should be on T285XXU0AQH1.
You can check your current firmware version in Android -> settings -> About / Phone info -> Baseband version (===> hint: this info is the best indicator to find out your current STOCK firmware, afaik)
If you like try first without flashing this firmware but if you encounter any issues upgrade to this version first before reporting
Fast and (afaik) good site for downloading: https://sfirmware.com/samsung-sm-t285/
(scroll down and type T285XXU0AQH1 in the search box, choose the one for your country, download, flash as usual, flash TWRP/SHRP again, flash this ROM)
There is nothing mentioned to extract just a subset and only flashing a subset. No. flash it completely or leave it. Just flashing part of it will break and/or even hard brick.
steadfasterX said:
uhm.. well that was not what I said. I did not say "install the baseband" I said install the FULL(!!!!!) STOCK firmware. Here again:
Samsung STOCK firmware should be on T285XXU0AQH1.
You can check your current firmware version in Android -> settings -> About / Phone info -> Baseband version (===> hint: this info is the best indicator to find out your current STOCK firmware, afaik)
If you like try first without flashing this firmware but if you encounter any issues upgrade to this version first before reporting
Fast and (afaik) good site for downloading: https://sfirmware.com/samsung-sm-t285/
(scroll down and type T285XXU0AQH1 in the search box, choose the one for your country, download, flash as usual, flash TWRP/SHRP again, flash this ROM)
There is nothing mentioned to extract just a subset and only flashing a subset. No. flash it completely or leave it. Just flashing part of it will break and/or even hard brick.
Click to expand...
Click to collapse
Ok,i have given up. I don't know the way to install that properly because of the CSC differences(you said it should be in T285XXU0AQH1 but it didn't available in my country XXV. XXV still use T285XXU0API1 even with the latest update from 2017). So i will use that normally bc i'm ok without cellular.Btw things still work like a charm, and i have no regret of choosing this rom.
steadfasterX said:
uhm.. well that was not what I said. I did not say "install the baseband" I said install the FULL(!!!!!) STOCK firmware. Here again:
Samsung STOCK firmware should be on T285XXU0AQH1.
You can check your current firmware version in Android -> settings -> About / Phone info -> Baseband version (===> hint: this info is the best indicator to find out your current STOCK firmware, afaik)
If you like try first without flashing this firmware but if you encounter any issues upgrade to this version first before reporting
Fast and (afaik) good site for downloading: https://sfirmware.com/samsung-sm-t285/
(scroll down and type T285XXU0AQH1 in the search box, choose the one for your country, download, flash as usual, flash TWRP/SHRP again, flash this ROM)
There is nothing mentioned to extract just a subset and only flashing a subset. No. flash it completely or leave it. Just flashing part of it will break and/or even hard brick.
Click to expand...
Click to collapse
Sorry for misunderstanding.
I have found the reason why the cellular issues comes out. It is made by the SIM card itself, not the baseband version or the stock firmware version as you have said. I was wrong when i think that it come from the software or stock firmware. Now i found out the reason for that. Sincerely apologize to you.
johnnyhoang said:
Ok,i have given up. I don't know the way to install that properly because of the CSC differences(you said it should be in T285XXU0AQH1 but it didn't available in my country XXV. XXV still use T285XXU0API1 even with the latest update from 2017). So i will use that normally bc i'm ok without cellular.Btw things still work like a charm, and i have no regret of choosing this rom.
Click to expand...
Click to collapse
Anyways thanks for noticing the recquirements. I think it is not necessary now since i found the real reason for the cellular issues.
When I changed another SIM card, it works flawlessly.
johnnyhoang said:
Sorry for misunderstanding.
I have found the reason why the cellular issues comes out. It is made by the SIM card itself, not the baseband version or the stock firmware version as you have said. I was wrong when i think that it come from the software or stock firmware. Now i found out the reason for that. Sincerely apologize to you.
Anyways thanks for noticing the recquirements. I think it is not necessary now since i found the real reason for the cellular issues.
When I changed another SIM card, it works flawlessly.
Click to expand...
Click to collapse
great stuff and thx for the feedback!
It ok, but google services framework stop. Fash zip Dolby Atmos (DAP_r6.5.zip) work Vanced manager install Youtube Vancednon root work. addonsu-14.1-arm-signed.zip work. VOLUME+BOOSTING+SOUND+(Very+Loud).zip work
binhdt said:
It ok, but google services framework stop. Can not flash zip Dolby Atmos, Vanced manager can not install Youtube Vanced
Click to expand...
Click to collapse
apps which require google crap will not work on /e/. That is by design..
You can browse the e foundation forum to find alternatives though.
How To's: https://doc.e.foundation/how-tos/
General Forum: https://community.e.foundation/
--> e.g a quick search here shows a bunch of alternatives for youtube: https://community.e.foundation/t/alternative-to-youtube/23703/10
or here another huge listing: https://github.com/tycrek/degoogle
Other alternatives: https://community.e.foundation/t/ho...urce-alternatives-of-your-apps-services/13616
.-
steadfasterX said:
brought to you by the
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
About /e/
/e/ is an a mobile ecosystem (ROM + onlines services) that:
is open source
is pro-privacy
is compatible with most existing Android applications
cares about usability
is as far as possible freed from shackles by Google and OEMs
already exists!
It’s the alternative to the Apple/Google duopoly on the smartphone.
... so again and just to be clear: /e/ is not just a ROM, it is more a complete privacy ecosystem and consists of:
an installable mobile operating system for smartphones, which is forked from Android and strongly “ungoogled”
a set of sorted and improved default open source applications
various online services that are linked to the mobile operating system, such as: a meta search engine for the web, drive (with synchronization), mail, calendar, notes, tasks.
Features
Based on the stable Lineage OS
microG fully pre-installed with Signature Spoofing in restricted mode!
All features described on the /e/ page: What is e
All features and fixes of LineageOS
My builds come with full OTA update support
... you know that thing which informs you that a new update is there and where you just click to download + install
Difference from pure /e/ or: why are the builds UNOFFICIAL?
There are no differences. its pure /e/. "just" build on my server
Known issues:
Keep in mind that this is brand new stuff so it may (still) contain unknown issues!
So back up regularly and frequently!
Camera does work but only for photo, i.e. video recording fails.
If you find a bug not listed let me know and SHARE LOGS! -> READ FAQ#1 for how to provide proper logs.
Requirements
Latest TWRP or SHRP (recommended) build.
Do a full (i.e. Nandroid) backup before doing anything!
Samsung STOCK firmware should be on T285XXU0AQH1.
You can check your current firmware version in Android -> settings -> About / Phone info -> Baseband version
If you like try first without flashing this firmware but if you encounter any issues upgrade to this version first before reporting
Fast and (afaik) good site for downloading: https://sfirmware.com/samsung-sm-t285/
(scroll down and type T285XXU0AQH1 in the search box, choose the one for your country, download, flash as usual, flash TWRP/SHRP again, flash this ROM)
Installation
Full clean install as described here (FAQ #2) is highly recommended. DO NOT REPORT ISSUES when you have skipped that step!
Flash /e/
Optional (if you want root): Flash Magisk
Flashing OpenGapps ????? STOOOOOOP! NO No no! you don't want that on a google-free phone! /e/ contains everything you need to live without Google! So flashing OpenGapps on /e/ is like using a bit more secure LOS but that's not the point of /e/. Either try without or go with LOS (imho).
Boot it (will take a bit on first boot!!! be patient!)
Enjoy the most easiest way to have a privacy focused and google-free phone!
Download
Get your builds from my leech server (new installs or re-installs)
http://leech.binbash.rocks:8008/e-os/nougat/gtexslte/
If you have a previous version of my(!) /e/ ROM installed already and just want to update to a newer release:
Android settings -> Updater (yes my builds have built-in OTA support!)
Note:
Builds are updated as soon as possible. There is no build cycle.
Information pertaining to your device is displayed accordingly.
The current build is the latest for your device.
Changelogs
search results from this thread: click
Support
Of course in this thread but also by Telegram.
I have created a generic group for all stuff around Android : here
and another one if you want to keep up2date whenever I build something (TWRP, SHRP, LOS, /e/, ...): here
Credits
jedld, really he did a great job and making this project possible at first!
LineageOS (the base of /e/)
The /e/ foundation and all related devs making this experience possible!
and all I forgot to mention ....!
Sources
build manifest
XDA:DevDB Information
gtexslte_eos-n_unofficial, ROM for the Samsung Galaxy Tab A series
Contributors
steadfasterX, jedld(!)
Source Code: https://gitlab.e.foundation/e
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Beta
Created 2020-11-18
Last Updated 2020-11-18
Click to expand...
Click to collapse
I just flashed it and looks very nice thank you, titanium backup force closed, is there any restriction?
hotmatua.parulian said:
I just flashed it and looks very nice thank you, titanium backup force closed, is there any restriction?
Click to expand...
Click to collapse
Should work. Follow FAQ #1 in the second post