HTML:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Flashing Instruction:
1. Make sure you got the latest firmware installed (LMY48T)
2. Backup all your data (Important)
3. Wipe system, data and cache.
4. Flash the ROM and Gapps
5. Reboot
Downloads:
https://download.lineageos.org/mako
Gapps:
https://wiki.lineageos.org/gapps.html
TWRP:
https://twrp.me/lg/lgnexus4.html
Extras (Su Addon):
https://download.lineageos.org/extras
Sources:
https://github.com/LineageOS/android_device_lge_mako
https://github.com/LineageOS/android_kernel_lge_mako
Changelog:
https://www.cmxlog.com/15.1/mako/
Bug Reporting:
https://jira.lineageos.org
Important notes:
- You must use TWRP 3.2.0.0 or higher to flash this rom!
- Remember that no bug reporting are accepted if you using root and/or custom kernel!
XDA:DevDB Information
LineageOS 15.1, ROM for the Google Nexus 4
Contributors
voron00
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-05-07
Last Updated 2018-05-07
I can't install gapps, help!
Only pico gapps can be installed, if you still unable to install pico gapps
create a .txt file named gapps-config.txt with the following contents:
Code:
Exclude
GoogleTTS
and copy that file to the root of your /sdcard, after that install pico gapps.
Recommended gapps-config for opengapps nano (with faceunlock support):
Code:
Exclude
GoogleTTS
Search
Speech
Upgrading from 14.1? Read this!
Android 8.1 is noticably bigger than previous version and directly flashing 15.1 over 14.1
is only possible when you got no gapps or pico gapps installed. If you used for example nano gapps
the correct steps of upgrading would be:
- Boot into Recovery
- Wipe system and cache
- Flash LineageOS zip
- Flash Gapps Pico
- Reboot
LineageOS + MicroG
Interesting!
You can not see ROM.zip now at https://download.lineageos.org/mako
and there is a version from MicroG at https://download.lineage.microg.org/mako :good:
FIRST to comment at this legendary thread! Thanks to the developers who initially made unofficial build, changed it to official, and opted to maintain this old device!
By the way, will the build be posted on the LinageOS official website soon? I still can't see it...
thanks voron00 for your work...
download link only shows 14.1 LOS...
d_g_m_2000 said:
thanks voron00 for your work...
download link only shows 14.1 LOS...
Click to expand...
Click to collapse
It's not built yet, but it's in the queue.
You can always check the build status on lineageoslog dot com (I'm not allowed to post external links because I don't have enough posts).
Holzhacker said:
It's not built yet, but it's in the queue.
You can always check the build status on lineageoslog dot com (I'm not allowed to post external links because I don't have enough posts).
Click to expand...
Click to collapse
Why not check the build queue here: https://jenkins.lineageos.org/job/android?
89.4MB for this rom? is that light?
-- comment deleted--
lineage-15.1-20180507-nightly-mako-signed.zip
d_g_m_2000 said:
89.4MB for this rom? is that light?
-- comment deleted--
Click to expand...
Click to collapse
when you gonna try download, it gonna be 327MB
Downloaded and flashed with the pico open gapps. So far working perfectly. Thank you very much voron00
Hm, automatic LiveDisplay doesn't seem to be working for me, I'm fairly sure it did on unofficial builds. I'll have to check back on this.
n0b0dy666 said:
Hm, automatic LiveDisplay doesn't seem to be working for me, I'm fairly sure it did on unofficial builds. I'll have to check back on this.
Click to expand...
Click to collapse
Works for me. I think night mode time now from 21:00 to 3:00 fo rsome reasons.
voron00 said:
Works for me. I think night mode time now from 21:00 to 3:00 fo rsome reasons.
Click to expand...
Click to collapse
I'll perform some additional tests and get back to you. For some reason it didn't automatically turned the night mode on. Manually switching between modes work though.
Ah, great the party started already!
Sent from my OnePlus 3T using XDA Labs
I did a clean flash today with the first official LOS15.1 including pico gapps and magisk 16.0 and everything went without a glitch.
The only issue I have is installing Adaway (Fdroid installed just fine): Adaway is greyed out in the Fdroid app whereas I could install it on my Nexus 6.
What is the trick to be able to install Adaway?
fahrer17 said:
I did a clean flash today with the first official LOS15.1 including pico gapps and magisk 16.0 and everything went without a glitch.
The only issue I have is installing Adaway (Fdroid installed just fine): Adaway is greyed out in the Fdroid app whereas I could install it on my Nexus 6.
What is the trick to be able to install Adaway?
Click to expand...
Click to collapse
You can use the XDA adaway version directly: https://www.androidfilehost.com/?fid=673956719939825702
I get an FC when I try to open settings, system, buttons...
Log attached
https://drive.google.com/file/d/1FUKefen_oyVxjBQCOuS1lvGLHZ1H-G_s/view?usp=drivesdk
Edit: I do use magisk, so I totally understand when you choose to ignore this...
Edit2: just checked and it also FC's without magisk being present, just couldn't take a log as Matlog needs root and I'm not near a computer, I however didn't clean flash, I updated as suggested by OP (wipe all but internal storage & data)
Edit3: from my observations, when changing overlays in settings, display, advanced the buttons page starts to appear for a second and then crashes - I assume it's an overlay issue, as seen so many times by substratum... Even though the log complains about lineage parts right before the fatal exception but anyway I'm terrible at reading logs..
Sent from my Nexus 4 using XDA Labs
Have a problem now with Sberbank Online app - it now detects this ROM as modified or rooted (didnt install su addon) and works in restricted mode. With previous builds of 14.1 (inc. the last one) it works normally like with stock rom.
Upd: I've send them an e-mail asking to add this rom in the whitelist.
Also, now phones wi-fi can't detect my 5Ghz network for some reason. Didnt change any settings on my router since 14.1 builds.
accuphase said:
You can use the XDA adaway version directly: https://www.androidfilehost.com/?fid=673956719939825702
Click to expand...
Click to collapse
Thank you! When using this do I get automatic updates?
The reason I ask: I could download some AdAway apk's directly from F-Droid but I wouldn't get any update notifications: https://f-droid.org/en/packages/org.adaway/
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device..
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github Repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
Device-specific source code:
Device tree: https://github.com/ghsr/android_device_samsung_i9152
Kernel source: https://github.com/ghsr/android_kernel_samsung_i9152
Compatibilitiy Patches: https://github.com/ghsr/build_tools/tree/cm-13.0/patches
WebView: https://github.com/pawitp/android_external_chromium-webview
Downloads
ROM: Google Drive and WebDav - login/password 9152
Gapps: http://opengapps.org
What works?
Wi-Fi
Bluetooth
RIL (Calls, SMS, Mobile Data)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera
Video (playback & recording)
Audio (playback & recording)
GPS
Everything else not listed under "known issues"
Known Issues
Runtime storage permission does not work properly (setns patches are not applied, see PermissionsHostTest CTS test)
Additionally, Dual SIM has the following limitations (once they work):
Both SIMs are always enabled (no way to disable one SIM)
"Receive incoming call while data is enabled" is always enabled
Installation Instructions
Make a backup!
Install a custom recovery with SELinux support
Download the latest build
Wipe data/factory reset if coming from stock or another ROM (You may get a "staus 7" error if you fail to wipe.)
Flash the ROM and then GApps
Reboot your phone
Enjoy!
To upgrade to a newer build, simply flash the zip. There's no need for data wipe or flashing Google Apps again. (However, if you are experiencing strange issues, you may want to try a wipe.)
Changelog
Code:
20161118: Upstream merge, Updated Kernel Adiutor to version 0.9.4.4.2, Updated SuperSU 2.79
20161214: Upstream merge, Updated Kernel Adiutor to version 0.9.4.2
20161118: Upstream merge, Updated Kernel Adiutor to version 0.9.4
20161014: Upstream merge
20160903: Upstream merge, Updated SuperSU 2.78, Updated Kernel Adiutor to version 0.9.30.2
20160807: Upstream merge, Added OTA update, Updated Kernel Adiutor to version 0.9.27.1
20160711: Upstream merge, Updated SuperSU to version 2.76, Integrated Yahoo Weather Provider
20160604: Upstream merge
20160508: Fixed youtube issue (stopping video playback after 5-7 seconds), Enabled gesture typing and fixed LatinIME fc, Fixed unstable usb connection, Fixed runtime storage permission (applied setns patches in the kernel), Enabled auto power modes, Added some encryption fixes, Upstream merge, Update to Android 6.0.1_r43
20160424: Upstream merge, Update to Android 6.0.1_r30
20160321: Upstream merge, Update SuperSU 2.65
20160314: Upstream merge, Update to Android 6.0.1_r22
20160227: Upstream merge, Fixed writing of files Recorder to the SD card, Integrated SuperSU, Updated KernelAuditor
20160211: Upstream merge
20160202: Upstream merge
20160120: Initial release
FAQ
F2FS
This Rom supports f2fs since the latest build. Don't ask me, what it is. Just google it.
Instructions for f2fs:
Download the modified twrp recovery for f2fs based from here and flash it
Save your data, your whole internal storage will be formatted soon.
Put the latest rom build and gapps on your EXTERNAL sdcard
Format data and cache to f2fs using twrp recovery
Flash the rom and gapps
DO NOT FLASH A KERNEL, WHICH DOES NOT SUPPORT F2FS
If you want to revert back to the usual ext4 partitions, format data and cache with twrp recovery to ext4.
Reporting Bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. The following is a useful format to follow.
Code:
What is your--
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
Dual SIM:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Credits
CyanogenMod team
@pawitp
@xenon92
@LuK1337
@andixlm
@KINGbabasula
@CoolDevelopment
@GHsR
XDA:DevDB Information
CyanogenMod 13, ROM for the Samsung Galaxy Mega 5.8
Contributors
GHsR, Superdiv
Source Code: https://github.com/cyanogenmod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Version Information
Status: Stabile
Created 20-01-2016
Last Updated 30-12-2016
First one
Will try and report
hello Kiborg_Man you ever experienced any problems after you use?
@Kiborg_Man Been over 2o mins. Still on bootanimation.
edit: looks like Supersu v2.5.2 OR Xposed was causing the issue.
Super smooth no issues clean build thanks for the build.
Thanks for the ROM....
_Iron said:
hello Kiborg_Man you ever experienced any problems after you use?
Click to expand...
Click to collapse
No
daneal2u said:
@Kiborg_Man Been over 2o mins. Still on bootanimation.
edit: looks like Supersu v2.5.2 OR Xposed was causing the issue.
Click to expand...
Click to collapse
Use SuperSU 2.66
He gave bad for me!
Once you take more than two hours of installation, did not recognize my SIM cards and has also stopped for all google applications. The most common was Google Play Services stoped ... Very sad !!!
_Iron said:
He gave bad for me!
Once you take more than two hours of installation, did not recognize my SIM cards and has also stopped for all google applications. The most common was Google Play Services stoped ... Very sad !!!
Click to expand...
Click to collapse
Clean install it dont wipe system . wipe data dalvik and cache. Dont flash supersu . flash open gapps nano
hardik190 said:
Clean install it dont wipe system . wipe data dalvik and cache. Dont flash supersu . flash open gapps nano
Click to expand...
Click to collapse
ok today I will do it this way... Thank you!
Hello guys...
I tried in several ways:
- As the Kboing;
- As the hardik190;
- I also tried a simple upgrade without the Data Wipe only with Wipe System / Cache;
- I tried like doing a clean installation;
- I tried installing the CM12.1 package with Gapps and later with the CM13 Zip only.
The results were always negative:
- Problems related to Google services;
- Problems with the recognition of SIM cards;
- And the last time with the Infinity Loop.
Really appreciate the help and commitment of friends in trying to help, but unfortunately I will keep me in CM12.1 until later builds.
Congratulations to Kiborg throughout dedication to upgrade a device so little known and with few partners to share experiences.
That's it folks!
@_Iron GApps need to be installed prior to the first ROM, put SuperSU if you need a version 2.66
P.S. MD5: a398f03d9fb75804fbf078cf5d297b6d *cm-13.0-20160120-UNOFFICIAL-i9152.zip
_Iron said:
Hello guys...
I tried in several ways:
- As the Kboing;
- As the hardik190;
- I also tried a simple upgrade without the Data Wipe only with Wipe System / Cache;
- I tried like doing a clean installation;
- I tried installing the CM12.1 package with Gapps and later with the CM13 Zip only.
The results were always negative:
- Problems related to Google services;
- Problems with the recognition of SIM cards;
- And the last time with the Infinity Loop.
Really appreciate the help and commitment of friends in trying to help, but unfortunately I will keep me in CM12.1 until later builds.
Congratulations to Kiborg throughout dedication to upgrade a device so little known and with few partners to share experiences.
That's it folks!
Click to expand...
Click to collapse
Flash cm 12 with gaops 5.1 let boot it then wipe data dalvik cache and cache . then install cm 13 then open gapps 6.0 nano or pico dont flash supersu ywt let it boot
@Kiborg_Man thanks
bug:my phone is not able to go to deep sleep. Wifi remains on even when is witch it off. And yes all options in location>3dot menu r off (Bluetooth and wifi scanning) don't know what to do. Wake locks are caused by cyanogenmod system.
Hope u look into the problem.
I'll provide screenshots l8r
hardik190 said:
Flash cm 12 with gaops 5.1 let boot it then wipe data dalvik cache and cache . then install cm 13 then open gapps 6.0 nano or pico dont flash supersu ywt let it boot
Click to expand...
Click to collapse
Let's see if understand:
- Should I install the CM12.1, Gapps 5.1, but should not activate the SUPERSU.
- Afterward WIPE DATA, WIPE CACHE Davik, WIPE CACHE.
- Install CM13 and Gapps 6.0-leave boot
My doubt is regarding the SUPERSU, I only installed it when the ROM shows me a message box saying that will update the SuperSU #.
You must install it by recovery mode?
Thanks for the attention of everyone there
_Iron said:
Let's see if understand:
- Should I install the CM12.1, Gapps 5.1, but should not activate the SUPERSU.
- WIPE DATA, WIPE CACHE Davik, WIPE CACHE.
- Install CM13 and Gapps 6.0-leave boot
Click to expand...
Click to collapse
Specially to install CM12.1 is not necessary, the following points need.
Install SuperSU version only 2.66 or 2.67 through recovery.
One more question...
In this version NETFLIX is OK?
in CM12 :bad:
Hello guys..
I have installed this ROM with 6.0 stock GAPPS for 3 days.
Issues that I know so far:
- Google camera always stop working for using other than camera( video, panorama, photo sphere )
-random freezes, that I need to pull out the battery
-sometimes phone restart itself after clearing apps from the overview(recent apps switcher)
Other than that issues, this ROM run smooth.
Thank you for the work :good:
Hmm... When I flash SuperSU 2.66 it boot loops.
pascalis said:
Hello guys..
I have installed this ROM with 6.0 stock GAPPS for 3 days.
Issues that I know so far:
- Google camera always stop working for using other than camera( video, panorama, photo sphere )
-random freezes, that I need to pull out the battery
-sometimes phone restart itself after clearing apps from the overview(recent apps switcher)
Other than that issues, this ROM run smooth.
Thank you for the work :good:
Click to expand...
Click to collapse
Youtube video connection problem at 0:05 every video
---------- Post added at 09:59 AM ---------- Previous post was at 09:57 AM ----------
Crowbar_Asdfghjkl said:
Hmm... When I flash SuperSU 2.66 it boot loops.
Click to expand...
Click to collapse
Without supersu the room has root aceess no problems for root permission . enable root access from devloper option and give apps and adb thats it
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include "std_disclaimer.h"
/*
* Your warranty is not void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit Gerrit Code Review.
Wiki
Official CyanogenMod Wiki:https://wiki.cyanogenmod.org/w/Mako_Info
Installation
First time CyanogenMod 14.1 installation on your Nexus 4:
Read the official Wiki page
Unlock your bootloader if you haven't done so already
Flash a custom recovery via Fastboot
Push GApps (arm) and the CM 14.1 zip to your device
Boot into Recovery
Perform factory reset
Flash the CM 14.1 zip from SD card
Flash GApps from SD card
Reboot
Upgrading from earlier version of CyanogenMod (even from 13.0) :
Push the new CM 14.1 zip to your SD card
Boot into Recovery
Flash the CM 14.1 zip from SD card
Flash the most recent GApps for 7.1 if you are upgrading from earlier android version
Reboot
Downloads
Lastest Nightly 14: http://get.cm/get/mako-latest.zip
Lastest Recovery (Nightly) : http://get.cm/get/mako-latest-recovery.img
Lastest Snapshot : http://get.cm/get/mako-snapshot.zip
Lastest Recovery (Snapshot) : http://get.cm/get/mako-snapshot-recovery.img
-----------------------------------------------------------------------------
Google Apps (arm): wiki.cyanogenmod.org/w/gapps
All the builds: http://download.cyanogenmod.org/?device=mako
Code:
Phone Informations
* CM version
* Gapps version
What you did:
* Wipe data: y/n
* Upgrade from previous official cm build: y/n
* Restore with titanium backup: y/n
You're using (if yes write which one) :
* Task killer
* Phone cleaner / Battery enhancer apps
* Non-stock kernel
* Modified kernel settings
* Other mods
Bug info:
* Last version it worked on
* Repro steps
F.A.Q.
ROOT! ROOT! Give me root or i'll die!!! Where root is???
First of all DO NOT flash any SuperSu/SuperUser/SuperMan zip package to get root. Go to Settings>Developement Settings>Root access and select "Apps Only"
Why no nightly today?
Build failed. Check again tomorrow
When do I have to wipe data?
You must wipe data only when you're switching from another rom or migrating to Snapshot branch from Nightly and vice versa. You don't need to wipe data when you update in the same release channe (this applies to 13.0 -> 14.1 upgrades too)
Will you add <insert awesome feature here>?
I won't. If you write it, submit a commit to gerrit, where it will be reviewed.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Contributors
cyanogen, CM team
Source Code: https://github.com/cyanogenmod
Oh, finally.
God bless CM.
What about buglist?
Hi,
how it is possible to install SuperSU? some app, for example adaway don't work with superuser
pincher65 said:
Hi,
how it is possible to install SuperSU? some app, for example adaway don't work with superuser
Click to expand...
Click to collapse
For adaway flash systemless hosts first and then it will work with superuser
pincher65 said:
Hi,
how it is possible to install SuperSU? some app, for example adaway don't work with superuser
Click to expand...
Click to collapse
For me adaway works just fine with built in superuser.
I'm on stephanmc latest build.
Does anyone have information about the GPU driver used, is it the Developer Preview from Flo or did CM come up with some magic?
No CAF?
g33k0 b3lk0w said:
For adaway flash systemless hosts first and then it will work with superuser
Click to expand...
Click to collapse
systemless it is SuperSU, superuser - system app. cm 14.1 use superuser (system app) why you suggest to flash zip for the unsystem app? it won't work. earlier it was possible not including superuser in options of the developer to flash SuperSU. here it is impossible
tom0769 said:
For me adaway works just fine with built in superuser.
I'm on stephanmc latest build.
Click to expand...
Click to collapse
why you answer here? см by stephanmc here
Can anyone please share how it works or if there are any important bugs?
pincher65 said:
systemless it is SuperSU, superuser - system app. cm 14.1 use superuser (system app) why you suggest to flash zip for the unsystem app? it won't work. earlier it was possible not including superuser in options of the developer to flash SuperSU. here it is impossible
why you answer here? см by stephanmc here
Click to expand...
Click to collapse
It reall, works with superuser just try it two times and it will work
I tested ROM from stephanmc and cm-14.1-20161126-EXPERIMENTAL.
ROM from stephanmc better appearance, but the battery decreases rapidly , cm-14.1-20161126-EXPERIMENTAL still needs refine.
pincher65 said:
why you answer here? см by stephanmc here
Click to expand...
Click to collapse
Simply because it's working on cm14.1, and you asked here
g33k0 b3lk0w said:
It reall, works with superuser just try it two times and it will work
Click to expand...
Click to collapse
what "to make two times"? to read your post? flash systemless zip?
everything has appeared simply: it is necessary to download the last adaway 19.11.2016, it works with the app superuser
tom0769 said:
Simply because it's working on cm14.1, and you asked here
Click to expand...
Click to collapse
if I had had problems with his ROM, I would ask a question in that thread
pincher65 said:
what "to make two times"? to read your post? flash systemless zip?
everything has appeared simply: it is necessary to download the last adaway 19.11.2016, it works with the app superuser
if I had had problems with his ROM, I would ask a question in that thread
Click to expand...
Click to collapse
I use the old adaway just after i press to activate it and it says failed, i press activate again and it works
g33k0 b3lk0w said:
I use the old adaway just after i press to activate it and it says failed, i press activate again and it works
Click to expand...
Click to collapse
included three times, flash two - hasn't earned. after installation of new apk everything works.
good luck to you.
Why is the limitation on SuperSu? Why can't we use that?
Hey, does this ROM's default kernel come with color control? Or could anyone suggest such a kernel? I've tried hellspawn but the performance was abysmal for me.
manikandanguru said:
Why is the limitation on SuperSu? Why can't we use that?
Click to expand...
Click to collapse
Why in this Rom systematically there is "SU" files? I don't want root because I Have to erase these files to install correctly the app [email protected] for my job. Otherwise i can't connect my k920 on my job network.... Root files is rejected!
FYI: Anyone formerly using F2FS having bootloops... Must format /data and /cache back to ext4 otherwise CM14.1 won't complete booting.
I can't give root access to my Nexus 4, it's install fine, but when the device start, it has a boot loop when it shows the start desktop. Restarting to the end of times.
Edit: FYI, i'm using last version of TWRP and SuperSU-v2.46.zip
Sorry for my english, but i speak spanish.
Greetings from Chile
Code:
/*
** Your warranty is now void.
**
** We are not responsible for bricked devices, dead SD cards,
** thermonuclear war, or you getting fired because the alarm app failed. Please
** do some research if you have any concerns about features included in this ROM
** before flashing it! YOU are choosing to make these modifications, and if
** you point the finger at us for messing up your device, we will laugh at you.
**
**/
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
IMPORTANT INFORMATION
Root is not included by default on LineageOS 14.1. You need to install an add-on via recovery. You only need to install this once. You can download the SU add-on here
After installation go to Settings>Developer Options>Root access and set to Apps only or Apps and ADB.
LineageOS comes with LineageOS Recovery by default, if you don't like it (like me ) you can flash alternative recoveries using IsoRec. You really need 1GB /system partition. The smallest build-configuration is larger than 512mb. You can use ODIN, but you can also use Lanchon's REPIT.
If you're interested in BLN, check this thread for a complete support of this feature.
If you're interested to go to emulated-storage, check this thread.
Official LineageOS Wiki: http://wiki.lineageos.org/
Changelog: https://www.lineageoslog.com/14.1/i9100
LineageOS official nightly builds
https://download.lineageos.org/i9100
Google Apps:
http://opengapps.org/
XDA:DevDB Information
Lineage OS 14.1, ROM for the Samsung Galaxy S II
Contributors
rINanDO, lysergic acid, serenitys
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2017-02-13
Last Updated 2017-04-20
Reserved
gapps link dead
[i9100] Useful fixes for LineageOS 14.1 [7.1.2]
[i9100] Useful fixes for LineageOS 14.1 [7.1.2]
I am very glad that you are here!
It may be helpful to you:
Scripts moved here ...
BatyuS said:
gapps link dead
Click to expand...
Click to collapse
I think ist is just a mistake and should mean "open gapps"
http://opengapps.org/
Sent from my ME173X using XDA-Developers Legacy app
In General forum? Why not in Original Android Development?
Which GApps exactly?
Just to prevent from questions like "which GApps architecture and version do I need?"
This link will show you the minimal OpenGapps variant independently of your last visits (cookies never forget you)
http://opengapps.org/?download=false&arch=arm&api=7.1&variant=pico
(so only the variant needs to be changed if you prefer bigger packages)
Edit: Check this post to see how to create a customizable config that allows you to control the OpenGApps installer, e.g. to downsize bigger GApps packages for flashing Pixel Launcher while skipping other components you don't want. Included a sample config-file there as well.
I have questions:
FM Radio?
upgrade of CM 13?
TWRP emuled storage installation and new repit procedure?
from cm-13.0-20161218-nightly to lineageOS 14.1
shkedov said:
In General forum? Why not in Original Android Development?
Click to expand...
Click to collapse
Hi everyone, I am a low-average level user so I wonder if there is a step-by-step guide to upgrade my I9100-international from cm13 to lineageOS 14.1
bepcan said:
Hi everyone, I am a low-average level user so I wonder if there is a step-by-step guide to upgrade my I9100-international from cm13 to lineageOS 14.1
Click to expand...
Click to collapse
Only if you're coming from cm13 without losing data (i.e. your apps installed). Otherwise - wipe clean and install the recent nightly only (and gapps if you wish).
-3. Get a good cup of coffee.
-2. You must have at least 1GB partition of /system. If not, first repartition your storage (see OP) and then come back to here to proceed.
-1. Proceed to oficial download site: "https://download.lineageos.org/i9100 for the current build, https://www.androidfilehost.com/?w=files&flid=154035 for the experimental build, thanks to @ale5000 for uploading this for us.
0. Download the latest 2 following files: Nightly and Experimental (as for now lineage-14.1-20170208-experimental-i9100-signed.zip and lineage-14.1-20170208-nightly-i9100-signed.zip). Verify their md5 checksum to prevent errors, it is vital to do so.
Optional - download gapps from [url]http://opengapps.org/[/URL] for android 7.1, ARM (the nano is fine for me).
1. Boot into recovery. Install the "experimental" zip (Dirty flash! No wipes!).
1.5. You can reboot now into system, just to get a systemUI crash errors and a blank screen. Pretty useless. If you got to here then force reboot to recovery and proceed to step 2.
2. Reboot into recovery! Install the "Nightly" zip and gapps.
3. Wipe cache and boot to system.
There you go kiddo'.
Good luck! :fingers-crossed:
Whats Working Nd Not Working Tell Pls
rowdykumar786 said:
Whats Working Nd Not Working Tell Pls
Click to expand...
Click to collapse
It is relatively very stable to me, most is working! Phone and RIL, audio, GPS, BT, and a lot more!
I believe battery has improved too. Performance is very well.
This is my only phone, I rely on this phone, and on my daily use no problems so far! And yeah this ROM rocks!:good:
Go for it dude!
I experience a problem with libUMP making my own build. Is this : https://forum.xda-developers.com/showthread.php?p=69920779 still a working solution?
Verstuurd vanaf mijn GT-P7500 met Tapatalk
shkedov said:
Without losing data (i.e. your apps installed).
-3. Get a good cup of coffee.
-2. You must have at least 1GB partition of /system. If not, first repartition your storage (see OP) and then come back to here to proceed.
-1. Go to https://download.lineageos.org/i9100.
0. Download the latest 2 following files: Nightly and Experimental (as for now lineage-14.1-20170208-experimental-i9100-signed.zip and lineage-14.1-20170208-nightly-i9100-signed.zip). Verify their md5 checksum to prevent errors, it is vital to do so.
Optional - download gapps from http://opengapps.org/ for android 7.1, ARM (the nano is fine for me).
1. Boot into recovery. Install the "experimental" zip (Dirty flash! No wipes!).
1.5. You can reboot now into system, just to get a systemUI crash errors and a blank screen. Pretty useless. If you got to here then force reboot to recovery and proceed to step 2.
2. Reboot into recovery! Install the "Nightly" zip and gapps.
3. Wipe cache and boot to system.
There you go kiddo'.
Good luck! :fingers-crossed:
Click to expand...
Click to collapse
Do you don't include TWRP emu 3.03 https://forum.xda-developers.com/showpost.php?p=71009597&postcount=88 Interesting
Yes I would like to know upgrade path to official using twrp3.0.3 for emulated storage too please
todonormal said:
Do you don't include TWRP emu 3.03 https://forum.xda-developers.com/showpost.php?p=71009597&postcount=88 Interesting
Click to expand...
Click to collapse
People asked for a simple migrating guide from CM13 to LOS14.1, if someone isn't heading to switch to emulated I don't see a reason to send people to install an emu-recovery while they don't wish to.
It should be a decision for users.
Therefore I don't see a reason to include special addtional options besides the basics (exp+nightly+gapps). Whoever wants to expand more should simply read the OP and the links.
As for myself yes, I'm on emu now.
shkedov said:
People asked for a simple migrating guide from CM13 to LOS14.1, if someone isn't heading to switch to emulated I don't see a reason to send people to install an emu-recovery while they don't wish to.
It should be a decision for users.
Therefore I don't see a reason to include special addtional options besides the basics (exp+nightly+gapps). Whoever wants to expand more should simply read the OP and the links.
As for myself yes, I'm on emu now.
Click to expand...
Click to collapse
Could we have a short video to show how to switch to emulated storage?
Regards.
New build lineage-14.1-20170213-nightly-i9100-signed.zip is up
https://www.lineageoslog.com/14.1/i9100
laptopu said:
Yes I would like to know upgrade path to official using twrp3.0.3 for emulated storage too please
Click to expand...
Click to collapse
Hmm, because this phone is my main and only phone, I won't be able to test that soon (reverting recovery and ROM to cm13, reverting repartitioning too, then starting to trial and error).
But I believe that the safest way is to start from the moving to LOS14.1 - flashing the experimental and nightly first, as I guided. Then later flash emu-twrp recovery and proceed with rINanDO's instructions.
I'm afraid doing opposite (emu'ing first and then flash exp+nightly) might not work since Lanchon and the guys warned us that this emu-kernel might not work even with cm13 and maybe even affect it! Maybe repiting manually with Lanchon's magic REPIT would do, then migrate ROM, then change to new emu-recovery.
PLEASE:
- don't direct-link to recoveries that will brick your phone if installed too early.
- read the linked threads in the opening posts to understand the complexity of any of the changes
- if understood the consequences and you still want to do them all at once: know your limits
- if still feeling comfortable until here: go ahead *but do it in the correct order* or your phone will bootloop as all the newer test-recoveries were built with a Nougat ramdrive and thus will very very likely bootloop on your phone if installed on non-Nougat ROMs!
So my advice for your own safety: stay in your lane and read everything first.
EDIT: And by the way: please keep emulated storage discussions in the appropriate thread until it is officially tested and documented to be kind of noob-proof.
Lineage is a free, community built, aftermarket firmware distribution of Android 7.1.1 (N), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Lineage is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Everything except in BUGS/Not working list
BUGS/Not working :
Offline charging doesn't work
STK hangs after choosing a subscription in the menu
Front camera displays 0,3MP instead of 2MP
First time installing LineageOS 14.1 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
NOTE: First boot might take long time, due to deodexed build, so don't consider bootloop!!
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
DOWNLOADS:
Click to expand...
Click to collapse
BETA-4: Drive link
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
LineageOS 14.1, ROM for the Samsung Galaxy Core Prime
Contributors
remilia15
Source Code: https://github.com/remilia15/android_device_samsung_core33g/tree/cm-14.1
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.4
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 3
Beta Release Date: 2017-04-08
Created 2017-04-08
Last Updated 2018-06-15
CHANGELOG
BETA-1:
Initial LineageOS 14.1 release
BETA-2: Post #25
BETA-3: Post #230
BETA-4: Post #365
Frequently Asked Questions
Taken originally from @doesntexits
Q: ROM startup too slow?
A: Nope, just because you haven't done a factory reset before installing the ROM
Q: Dead touchscreen?
A: Wrong installation method leads to this problem. Before restoring to stock through Odin, go to recovery mode (TWRP highly recommended), wipe everything in the Wipe section >> Advanced wipe (tick all system, data, cache, but not other storages, no need wiping dalvik/ART cache, as it already done by wiping data), then go to Download mode, restore stock, install custom recovery again and then, install the ROM you want
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G360HU
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, you can
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow, and now it's Nougat
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in this ROM? I don't see it in Storage settings
A: This feature has been moved to Developer settings since Marshmallow, and will reset to default (Charging) after everytime you unplug your USB (due to security reasons). Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging" or "USB is connected"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Q: My phone is slow as snail after installing ROM. I've tried restoring stock and do formattings but no help?
A: I have answered this question. See this post: Link
Thanks @remilia15
Thread bookmarked
Thanks
Awesome @remilia15 thanks
WOW we have got a LOS 14.1
you are awesome
Finally N for our device. Yay. Thanks OP
Fix for home button not working
So I managed to fix the home button not working bug.
Extract the contents of the attached zip file into your /system/usr/keylayout and change the permissions of each file to 644 if they are not 644 already. Then a reboot should fix the problem.
Now searching for quick fix of camera.
For older releases, use patch below by [email protected] for those bug fixes.
Or flash newer release like Beta-2.
Any custom kernel works?
FIX for bugs
listed things are fixed
camera [photo&video]
Flac audio codec
home button
volume [increased]
flash the zip and do a factory reset
DOWNLOAD
[email protected] said:
listed things are fixed
camera [photo&video]
Flac audio codec
home button
volume [increased]
flash the zip and do a factory reset
DOWNLOAD
Click to expand...
Click to collapse
Why still do factory reset? I just flashed and reboot works fine.
mmmmmmm Thanks for it
What about battery drain ????
Nice! Downloading, will test tonight.
Sent from Vietnam
Thank you
Q: How to use adoptable storage feature? I see it's new in Marshmallow
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings @remilia15
Lol !
we are here in Nougat Not Marshmallow
Thanks to all Contributor to build this Lineage Os For G360H, At least we got it :good:@[email protected] fixed the many bugs of Beta-1 so Please update Beta Version and Bug list @remilia15
Whats about Battery drain issue? Who already Install this Rom please review it,
Thanks you
adamh.ayyad said:
Q: How to use adoptable storage feature? I see it's new in Marshmallow
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings @remilia15
Lol !
we are here in Nougat Not Marshmallow
Click to expand...
Click to collapse
Mtp is currently having problems.
Sent from my SM-G360H using Tapatalk
---------- Post added at 07:00 AM ---------- Previous post was at 07:00 AM ----------
noman6999 said:
Thanks to all Contributor to build this Lineage Os For G360H, At least we got it [emoji14] :good:@[email protected] fixed the many bugs of Beta-1 so Please update Beta Version and Bug list @remilia15
Whats about Battery drain issue? Who already Install this Rom please review it,
Thanks you
Click to expand...
Click to collapse
Battery drain is common so just ignore it lol.
Sent from my SM-G360H using Tapatalk
SupulEdirisinghe said:
Mtp is currently having problems.
Sent from my SM-G360H using Tapatalk
Its working with me
Click to expand...
Click to collapse
@remilia15
Nice job my little sister
Anyway, I hope @AtomR saw this thread
It has been a very long time since my last post on XDA. I've been so busy with my job, and haven't got time to visit here
How are you guys all going?
This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Resurrection Remix the ROM has been based on CM,slim.omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Resurrection Remix
Special thanks to, the CM team,OMNI team ,SLIMROMS and of course to all the supporters
How to flash:
-Flash TWRP (version 3.0.0-0 or newer recommended)
-Make Nandroid backup (optional)
-Wipe > Advanced Wipe > select data, system, ART/Dalvik Cache, Cache, Internal Storage > Swipe
-Install > select Lineage14.1 Zip > Swipe, optional: flash GAPPS (before rebooting!)
-Reboot
Please read full OP before posting or flashing anything. Please don't report any bugs, if you use Xposed, any mod or modified the system.
Please report no issues, if you
flashed Xposed
using mods or something like that (other SU solutions than Magisk)
or modified the system
What is working
Everything
No major issues/bugs
Download
Other Builds
GAPPS
Notes:
- just ignore E: Unknown Command errors in TWRP
- Flash GAPPS before reboot first time after flash!
- If using MTP/PTP shows no files, please tap one more at transfer files in notifications
- If something not listed ist not working, please test it also with SELinux permissive (setenforce 0 via Terminal Emulator/ADB Shell or use SELinuxModeChanger)
Changelog:
20180313: Synced RR and device sources, for now last build
20180124: Synced RR and device sources
20171206: Synced RR and device sources
20170926: Synced RR sources and device sources, fixed MpDecision
20170808:Synced RR sources and device sources (changes since 20170723 Lineage build)
20170704:Synced sources, synced device sources (removed buggy timekeep (fixes wifi problem), RIL updated (fixes Autotimezone), disabled live display per default, some minor changes), not prerooted anymore
20170627:Synced sources, synced device sources (switched to Sony Timekeep (experimental), added SamsungDoze, enabled sdcardfs, enabled CIFS/NFS, mac access fixed, some kernel changes)
20170614: first release
Credit: LineageOS/CyanogenMod Team, Maintainer and Valera1978
Sources:
Device
Kernel
Vendor
XDA:DevDB Information
Unofficial Resurrection Remix for SM-P605, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
davidmueller13
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 5.1.1 Bootloader and modem
Based On: LineageOS
Version Information
Status: No Longer Updated
Stable Release Date: 2018-03-13
Beta Release Date: 2017-06-14
Created 2017-06-15
Last Updated 2018-03-15
Sweeet @davidmueller13
Since you are in the listening mode, taking requests, and had this done in God speed - can you also take care of the Global Warming problem
Appreciate it Sir!
What the difference of this RR from Linage?
bryanblue24 said:
What the difference of this RR from Linage?
Click to expand...
Click to collapse
RR has many more customization options. It's based on LOS, but has built in customization app to change pretty much everything.
@davidmueller13 I have 2 devices. Somehow, on both this and LOS the two devices are getting the same Mac address assigned to them which is resulting in the devices getting bumped off the wifi network. Earlier the only solution I could find was to keep one on a touchwiz rom. Any suggestions? Thanks!
sandibhatt said:
RR has many more customization options. It's based on LOS, but has built in customization app to change pretty much everything.
@davidmueller13 I have 2 devices. Somehow, on both this and LOS the two devices are getting the same Mac address assigned to them which is resulting in the devices getting bumped off the wifi network. Earlier the only solution I could find was to keep one on a touchwiz rom. Any suggestions? Thanks!
Click to expand...
Click to collapse
thanks for the output! So you mean RR is better than linage rom since it's like a modified (or upgraded) linage rom?
bryanblue24 said:
thanks for the output! So you mean RR is better than linage rom since it's like a modified (or upgraded) linage rom?
Click to expand...
Click to collapse
I like RR more than Lineage because of the customization options. Try this build, you won't regret it.
Thanks for your work @davidmueller13
How's battery life for those of you that have tested?
GREATT!!! I'VE BEEN WAITING FOR THIS.. THANKS ALOT.. I'll try it asap.. Thanks developer @davidmueller13.. Ur the best..
Does this ROM save, or have the option to save, the data files on the external sSD card?
I'm using te Lineage OS rom for the P605 vand it stores ALL data and OBB files on the internal memory.
I use a large amount of apps and am running out of space so I'm looking to find a solution, Apps to SD doesn't work as the rom isn't supported(Lineage OS).
@davidmueller13
Thanks for listening. This port is greatly appreciated. Just returned from a trip. I will try it right away.
The menu custom option is still not possible for hardware keys, like in the LineageOS port. It is rather frustrating. Can someone verify ?
Just some quick feedback - this ROM is excellent. Similar to LineageOS, but with more features/customisations. Also a lot more stable (for me) - LineageOS would crash when I juggle some multi-window apps around, but this RR has been completely stable - no crashes at all. Battery life also seems excellent - for only a few days testing.
---------- Post added at 09:45 AM ---------- Previous post was at 09:27 AM ----------
zadox said:
The menu custom option is still not possible for hardware keys, like in the LineageOS port. It is rather frustrating. Can someone verify ?
Click to expand...
Click to collapse
It's there on mine. In Settings, under the "Personalization" section, there is "Configurations" (the only option there). Plethora of options available under there, including the "Buttons" tab, which has a section for "Hardware keys".
forsythem said:
It's there on mine. In Settings, under the "Personalization" section, there is "Configurations" (the only option there). Plethora of options available under there, including the "Buttons" tab, which has a section for "Hardware keys".
Click to expand...
Click to collapse
But did you try it ? It's there but it doesn't work. As well as other custom actions that might require root (and I do have root access).
zadox said:
But did you try it ? It's there but it doesn't work. As well as other custom actions that might require root (and I do have root access).
Click to expand...
Click to collapse
Yes, I just tried it. I wanted to set the long-press for the Recents button to be a 3-dot menu. Configured it and it works perfectly.
Which button combination are you trying to set to do which function? Let us know and we can try it and see if it works for us...
It's called Overview button in my settings for some reason (but Menu button on my Note 3 with Resurrection Remix and Magisk). Haven't touched /system/usr/keylayout/ (just to be sure, I reinstalled RR on top of it and rooted with SuperSU 2.82). Custom actions that require root access (as reported in Button Remapper - it's deactivated/uninstalled) do not work in either hardware button for single/long/double triggers. Others, such as Flashlight, work. I will try with a clean install when I have free time, I 've been rather busy these days.
zadox said:
It's called Overview button in my settings for some reason (but Menu button on my Note 3 with Resurrection Remix and Magisk). Haven't touched /system/usr/keylayout/ (just to be sure, I reinstalled RR on top of it and rooted with SuperSU 2.82). Custom actions that require root access (as reported in Button Remapper - it's deactivated/uninstalled) do not work in either hardware button for single/long/double triggers. Others, such as Flashlight, work. I will try with a clean install when I have free time, I 've been rather busy these days.
Click to expand...
Click to collapse
Yes, it's called Overview button for me as well... but as that's the first time I've seen it called that, I just called it by what I knew it as!
It definitely worked for me, but I did a clean install, so it's possible that doing a clean install might have it working for you?
Good luck!
Su already included ?
Do I need to flash you to have root or install addonsu like for lineage ?
Tx
garniemand said:
Do I need to flash you to have root or install addonsu like for lineage ?
Tx
Click to expand...
Click to collapse
No. Actually, I broke my first install by trying to install SuperSU after the ROM and GApps - it wouldn't boot.
So I wiped again, just installed the ROM and GApps, then it booted fine. Magisk is included in the ROM, and gave root access to everything I needed (X-Plore for file management, Titanium backup, etc.).
The ROM still hasn't crashed for me once yet... LineageOS (with the same apps installed) would have crashed a dozen times by now...
Awesome ROM!
just have flashed this rom yesterday , and the result was amazing , seems more better than lineageos , more customization.
Wonderimg if substratum works on this rom