Related
Good
Searching the internet I came here to change the rom of my phone, use the hard reset and did not have any problem in the process, then asks me to restart the phone, restarted, and when a screen turns white and does not come out of it, no more than anything.
I'm a little desperate now, I know there is a high-value mobile but it cost me to raise the money to buy it, I hope you have a solution and can help me.
From already thank you very much
PS: sorry for my bad English, I am South American
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
warlordxxx said:
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
Click to expand...
Click to collapse
good
I think that what you say is only for original phone htc diamond 2, since according to official rom I read are for the real htc diamond 2.
The mine is not original, as it says is a Chinese clone t5388i, please follow the screen in white, would greatly appreciate if someone helps me out of this problem is quite afflicted.
Again sorry for my bad English
sorry missed the clone bit on your topic . I don't have a clone myself so no ideas if the hard reset works. Might be a good idea to post which ROM you flashed to it
good day
the mobile screen just stayed white and does not know how I can flash now, there will be someone who has been the same and have a solution? I appreciate it, I would be very helpful.
Greetings
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Eer said:
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Click to expand...
Click to collapse
hello friend
Reading that topic and searching for the tool by
internet gave me great hope, many users
have managed to solve the same problem, as no
I have a good English I can not understand how it's done
the process, did you guys could help me with a small
tutorial on how to fix my phone with that program?
I enter the program is that you give to download mode and
then I get 'EU entry Not calibration mode! (Mode =
0x00) 'and then does nothing else, I hope I can
help, thanks from now!
hello
I finally entered the discharge mode and while carrying on the idt went for something to eat when I returned I showed up he was 100% complete, the phone went off and did not catch more! Does anyone know it could happen? Is there any way to restart?
please help
K3 AID program
reeprich said:
OK - I can summarize my experiencies:
IDT flash... I think everybody who is doing this experiments have this software...
K3AID... h++p://www.ulozto.cz/6556122/k3firstaid-exe
can switch phone to "download" state even if the HW keys are not working
it suppose working ActiveSync connection (downloaded from mobileuncle com) not my own sw...
Sometimes may be a bit dificult to get K3AID working.. it can show some error message like "RTM state Error" - You need to install h++p://www.ulozto.cz/6556123/cabviaactivesync-1-5-setup-exe
and h++p://www.ulozto.cz/6556124/gb-ppc-2-1-3-20090929-cab
it is only summarize of my experiences - none of this utility is mine, so use it on your own risk
Click to expand...
Click to collapse
@HTC_NEW: Did you do the following steps according to reeprich instructions? What was the end result?
I did read that you used the calibration menu but I expect that you should use the download firmware menu. Is that available? ( I had the software installed but my virus scanner complained that there is a virus in the tmp file...) What's more important if your phone does not work anymore... Please be aware that this is a possible virus.
Removing the battery for a couple of minutes can help for restarting the phone.
htc new
I have done the same thing with my t5388i clone from china.
I tryed to flah the ROM and now I have the white screen.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Did you get your phone working back ?
Now i´m trying to use other ROM´s , but until now no success.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Hi,
I had the same problem.
I used the rom postet from parabellum20000 (post # 1354) in this thread:
http://forum.xda-developers.com/showthread.php?p=8573304&highlight=Electronic+star#post8573304
parabellum20000 said:
Electronic star finally sent me (what they claim to be) SD ROM for t5388i. (99.3MB) I personally do not want to verify if it is truth, I am the one fortunate owner of perfectly (in some degree) working phone. Please feel free to use it on your own risk and share results if possible.
http://www.mediafire.com/?ymgvo8bf2t3v4c5
P.S.Please remember, flashing your phone with a wrong ROM is the safest way to brick (damage) it. So do not do it if it isn’t really necessary!
Click to expand...
Click to collapse
I hope this rom helps you to alive your phones again.
Cheers
5290
Well, hello guys from xda, ill be fan of this site for a long time but i recently made an account just for get a bit of help with my phone since idk wtf im doing wrong(
Well my phone is the blu studio 5.5 s d630u.
First it was stuck on bootlogo, i tried to made an hardreset but i wasnt able to enter into recovery mode idk why.
so i tried to flash it, after i try it pops up an ERROR i dont remember exactly.
Now my phone dont event turn on but when i connect it to my pc the flash from the camera turns on for like half second then it get recognize by my pc.
Now when i try to flash my phone it just gives me any error.
i would like to upload images but i cant idk why or idk how:laugh:
Help me with this PLEASE, im kinda desperate and without money to send it to technical support :s
Ty for view this thread and sorry for my english.
I see you posted over a year ago but hey better late then ever anyway i have the same phone and it did the same thing and i was able to fix it very quickly
Hello guys!
I need a big help!
I have a meizu pro 7 (128GB). Have a bootloop and want now flash again with the stockrom "Variation A".
I can start in fastboot variation.
Who can help me? I have downloaded the last flyme-rom.
What did i have to do to "unbrick" my phone?
Thanks for help!
Best regards peter
Hello guys!
I have solved the problem!
When you start the phone in "recovery mode" and connect the phone to a computer so you will find a drive with "recovery". At this drive you can copy an "update.zip" (a-rom) and start at the phone. So it will restart and reboot.
I hopy anyone can use it.
best regards
peter
Did you ever figure out if this is possible?
Im in a bootloop and the recovery on this phone only give 2 options ive been trying to figure out how to sideload but without a proper recovery i cant do iot
fastboot takes commands but without a bootloader unlock and a recovery worth a **** i think its a fools errand. meizu is no help ive heard either
If you have damaged the stock recovery image, there is no option to restore. you need to pack the phone and send it to a Meizu dealer for reflash.
I have a brand new pro 7 plus Stuck at the FLYME with the turning logo . Shame really I didn't do anything out of the ordinary and now it's a 600 paperweight. Where is a service e center ? Nightmare this is ......I even contacted Meizu directly they basically told me to go @#$% myself ...
herb9876 said:
I have a brand new pro 7 plus Stuck at the FLYME with the turning logo . Shame really I didn't do anything out of the ordinary and now it's a 600 paperweight. Where is a service e center ? Nightmare this is ......I even contacted Meizu directly they basically told me to go @#$% myself ...
Click to expand...
Click to collapse
If its on Logo rotating, the bootloader probably is fine. You need to find the same version of the software that you have had on your phone. Then you go to recovery and flash it. There are two ticks, before the flash process begins. Mark both. Flash, reboot and it should be as good as new.
I wish you were right but I've tried flashing every fw under the sun and it's either corrupt or too old. I'm all ears though if you have suggestions going forward . You are correct in describing my situation. Thanks in advance
herb9876 said:
I wish you were right but I've tried flashing every fw under the sun and it's either corrupt or too old. I'm all ears though if you have suggestions going forward . You are correct in describing my situation. Thanks in advance
Click to expand...
Click to collapse
Hi, I'm sorry dude but we're in the same boat. There is a problem with the Chinese variant, when you flash a beta A firmware and then flash the G firmware, the phone gets stuck and you can't update to any firmware anymore. We asked Meizu on the Flyme forums for a while (it's been a while our phone is useless), a moderator said not long ago that apparently they will release a new firmware which fixes that, I'm not certain about it but it's our best bet at this point. Either that, or if someone with enough knowledge manages to find a way to unlock the bootloader.
Here is the link to the bug report if you want to click the "I have the same" button and, maybe make them hurry a bit?
http://forum.flymeos.com/thread-38010-1-1.html
herb9876 said:
I wish you were right but I've tried flashing every fw under the sun and it's either corrupt or too old. I'm all ears though if you have suggestions going forward . You are correct in describing my situation. Thanks in advance
Click to expand...
Click to collapse
Have you searched this site ?
https://reameizu.com
how to enter in fastboot mode meizu pro 7 plus ?
Hi there,
So i had a nice time with my poco, but now it's bricked and i need your help.
So is here anyone who can restore the phone using EDL Mode that it's usable ? Maybe someone knows a service who make these work remotely ? Because in Germany there's no service center from XIAOMI.
Heiko77 said:
Hi there,
So i had a nice time with my poco, but now it's bricked and i need your help.
So is here anyone who can restore the phone using EDL Mode that it's usable ? Maybe someone knows a service who make these work remotely ? Because in Germany there's no service center from XIAOMI.
Click to expand...
Click to collapse
You flashed arter leaks kernel ?
OmarKiller60 said:
You flashed arter leaks kernel ?
Click to expand...
Click to collapse
If he would flash arter leaked kernel which wiped ufs storage including bootloader, he may not even have oportunity to boot to EDL mode as its part of bootloader
Redmi note 8 pro bricked edl
Is there a way to bypass an approved account for Xiaomi through edl mode bricked I have a redmi note 8 pro phone who died two months ago and did not live are there any developers who report ??????
OmarKiller60 said:
You flashed arter leaks kernel ?
Click to expand...
Click to collapse
I flashed this kernal and now phone is bricked and I won't even enter into twrp mode just totally dead. I go to service center and that guy who has not much knowledge regarding this said I flash the official rom through fastboot mode and through edl mode but still its stuck on logo then he said there's one more shop near to service center that guy can help you into this I go that guy into his shop I told him I flashed the wrong kernal and its not even responding in anyway he understands what I mean to say he said he has to open the phone to revive but still he said there are 60% chance of success. I am so worried now can anybody please help me into this
hey all i have also flashed the kernel also an now my phone is bricked aswell i can only get edl to be recognized on my pc ive also tried flashing factory rom with mi flash tool and get the authentication error does anyone have a work around to this issue thanks
You got what you deserved, period. Don't flash every **** that someone is giving you.
And no, there is no workaround. Your phone is dead, go get a new one.
Lazy Rich said:
You got what you deserved, period. Don't flash every **** that someone is giving you.
And no, there is no workaround. Your phone is dead, go get a new one.
Click to expand...
Click to collapse
Nah, bull****. He just need authorized EDL account to flash stock firmware with miflash
EugenStanis said:
Nah, bull****. He just need authorized EDL account to flash stock firmware with miflash
Click to expand...
Click to collapse
Have fun finding someone that doesn't charge you an immense amount of money for that. Yeah, paying 100$ to some trustworthy ukrainian guy is probably better than buying a new phone.
I hope that these guys learned their lesson to not randomly flash any "fancy" things to their phone. Always look for trusted sources.
I for myself don't even flash newly released roms or kernels. Better wait a week, check some feedback and then go for it.
Lazy Rich said:
Have fun finding someone that doesn't charge you an immense amount of money for that. Yeah, paying 100$ to some trustworthy ukrainian guy is probably better than buying a new phone.
I hope that these guys learned their lesson to not randomly flash any "fancy" things to their phone. Always look for trusted sources.
I for myself don't even flash newly released roms or kernels. Better wait a week, check some feedback and then go for it.
Click to expand...
Click to collapse
Nah, the cost of EDL account is about ten dollars. Its still much more better to pay 10 buck rather then spending 400 dollars on new or used phone
Lazy Rich said:
I for myself don't even flash newly released roms or kernels. Better wait a week, check some feedback and then go for it.
Click to expand...
Click to collapse
Yeah, luckily not everyone does it, otherwise you would have certain problems.
Just check source and if you completely paranoid build the ROM by your self...
So, yes. I did flash leaked arter. Needed EDL flash and phone was alive. Problem that now exists is,I get no network connection. Also had to restore IMEI and so on. Maybe somebody got a solution to bring back at least second Sim to life with mobile connection.
i thought the same where thinking the phone is back i had wlan working but then i played arround with imei to get it back in phone now its completey ****ed no wlan no sim :laugh::laugh::laugh:
---------- Post added at 21:06 ---------- Previous post was at 21:01 ----------
i also try to flash the leaked kernel to fully brick the phone but its not bricking my phone lol dunno how to get it bricked to start from begin xD
U need just wipe partitions and flash persist.img to get WLAN back
its not working write protected its not even working with modified fastboot flash_all.bat in edl mode .....
i also tryed with orginal .qcn file from friends phone i only replaced the imeis not even working
edit: i worked 3 days on it nothing is working i gave it up buying a new phone and stop waisting my time on this ****
I can help you to do edl flash in just 800 rupees call me 7351071470
Here was a Guide. Someone said people don't care about Me or My Work so...
I followed the steps, but I can't get into bootloader mode. please help. When I reboot to bootloader, the screen is blank and doesn't respond to fast boot commands.
Noob here Never posted but I've lurked quite alot.
Installing magisk works fine, but not any GSI
I'm just getting bootloops, reboots every few seconds or stuck at the splash screen.
Restoring with EMMA works, so It's not bricked.
I've been struggling with this for over two days and I can't understand what's going wrong
RP1408 said:
I followed the steps, but I can't get into bootloader mode. please help. When I reboot to bootloader, the screen is blank and doesn't respond to fast boot commands.
Click to expand...
Click to collapse
Is Your LED Blue if you attech to USB? If yes, are your drivers not correctly installed...
strandplask said:
Noob here Never posted but I've lurked quite alot.
Installing magisk works fine, but not any GSI
I'm just getting bootloops, reboots every few seconds or stuck at the splash screen.
Restoring with EMMA works, so It's not bricked.
I've been struggling with this for over two days and I can't understand what's going wrong
Click to expand...
Click to collapse
Well, you can try:
fastboot flash super GSI.img (in fastbootd)
That may work... Let me know!
Hi.
I'm having problems unlocking my bootloader and accessing fastboot. I even installed Ubuntu because I thought the problem was my Windows drivers. No luck. It recognizes fastbootd thingie (adb reboot fastboot) and ADB commands, but button up and usb plug-in doesn't work, no matter the platform. Device info says it's unlockable, model is XQ-CT54, software version is 64.1.A.0.857. what I'm supposed to do? I can give more info if needed. Haven't tried flashing stock yet.
edit. Never mind, I got it, and on Windows! I just have to pick manually those Sony drivers from the list and feed them for device manager every time I use fastboot. Acceptable.
Ok I know this thread is for the 1 IV, but since this is basically a copy-paste of the previous tutorials for 1 III etc.: Is this procedure android 13 approved, for the IV series as well as for the III series? I myself have the 5 III but just recently a colleague asked me if there's a way to root their 5 IV which is why I stumbled over this thread in the first place.
Both of the phones are running on Android 13 since the end of December.
Retenor said:
Ok I know this thread is for the 1 IV, but since this is basically a copy-paste of the previous tutorials for 1 III etc.: Is this procedure android 13 approved, for the IV series as well as for the III series? I myself have the 5 III but just recently a colleague asked me if there's a way to root their 5 IV which is why I stumbled over this thread in the first place.
Both of the phones are running on Android 13 since the end of December.
Click to expand...
Click to collapse
If they have international version yes they can if they have US version no they can't
raven213 said:
If they have international version yes they can if they have US version no they can't
Click to expand...
Click to collapse
And this goes for III series as well as with Android 13 for either of the two? Once again sorry for asking this here but neither of us can afford a brick and I wouldn't get an answer in the 5 III thread anymore after someone seemed to have had issues there with A13
I
Retenor said:
And this goes for III series as well as with Android 13 for either of the two? Once again sorry for asking this here but neither of us can afford a brick and I wouldn't get an answer in the 5 III thread anymore after someone seemed to have had issues there with A13
Click to expand...
Click to collapse
I think with the III you should be able to root I know they just started blocking bootloader on the IV
raven213 said:
I
I think with the III you should be able to root I know they just started blocking bootloader on the IV
Click to expand...
Click to collapse
Both of us are located in europe so I'm guessing the bootloader block doesn't affect us in this case, guess I'll just have to try as soon as I find the time to do it
Has anyone tried flashing GSIs? I need help flashing lineage OS. After rebooting from fastboot I'm stuck at boot animation (waited ~20 minutes). AOSP GSI from android website works and boots in seconds but not lineage os, please help.
Miustone said:
You will be fine with it somehow!
All the Best for the future,
Miu
Click to expand...
Click to collapse
Duudddeee... Nooo...!
MOD EDIT: civil words
K. You know google caches pretty much the entire internet though right?
ParkourPaul said:
K. You know google caches pretty much the entire internet though right?
Click to expand...
Click to collapse
Most people will never do that and just jump off here. The point was to revert my contributions on the Xperia Forums and to take My Work aside from the Guides offline. There are still forks around and there might be cached copies of my Threads. But my personal support ends here and I won't continue my work for Xperias starting today. Please respect that and have a great time with your Device anyways!
Thread has been closed as OP @Miustone removed the content of the opening post.
Regards
Oswald Boelcke
Senior Moderator