Hi there,
So i had a nice time with my poco, but now it's bricked and i need your help.
So is here anyone who can restore the phone using EDL Mode that it's usable ? Maybe someone knows a service who make these work remotely ? Because in Germany there's no service center from XIAOMI.
Heiko77 said:
Hi there,
So i had a nice time with my poco, but now it's bricked and i need your help.
So is here anyone who can restore the phone using EDL Mode that it's usable ? Maybe someone knows a service who make these work remotely ? Because in Germany there's no service center from XIAOMI.
Click to expand...
Click to collapse
You flashed arter leaks kernel ?
OmarKiller60 said:
You flashed arter leaks kernel ?
Click to expand...
Click to collapse
If he would flash arter leaked kernel which wiped ufs storage including bootloader, he may not even have oportunity to boot to EDL mode as its part of bootloader
Redmi note 8 pro bricked edl
Is there a way to bypass an approved account for Xiaomi through edl mode bricked I have a redmi note 8 pro phone who died two months ago and did not live are there any developers who report ??????
OmarKiller60 said:
You flashed arter leaks kernel ?
Click to expand...
Click to collapse
I flashed this kernal and now phone is bricked and I won't even enter into twrp mode just totally dead. I go to service center and that guy who has not much knowledge regarding this said I flash the official rom through fastboot mode and through edl mode but still its stuck on logo then he said there's one more shop near to service center that guy can help you into this I go that guy into his shop I told him I flashed the wrong kernal and its not even responding in anyway he understands what I mean to say he said he has to open the phone to revive but still he said there are 60% chance of success. I am so worried now can anybody please help me into this
hey all i have also flashed the kernel also an now my phone is bricked aswell i can only get edl to be recognized on my pc ive also tried flashing factory rom with mi flash tool and get the authentication error does anyone have a work around to this issue thanks
You got what you deserved, period. Don't flash every **** that someone is giving you.
And no, there is no workaround. Your phone is dead, go get a new one.
Lazy Rich said:
You got what you deserved, period. Don't flash every **** that someone is giving you.
And no, there is no workaround. Your phone is dead, go get a new one.
Click to expand...
Click to collapse
Nah, bull****. He just need authorized EDL account to flash stock firmware with miflash
EugenStanis said:
Nah, bull****. He just need authorized EDL account to flash stock firmware with miflash
Click to expand...
Click to collapse
Have fun finding someone that doesn't charge you an immense amount of money for that. Yeah, paying 100$ to some trustworthy ukrainian guy is probably better than buying a new phone.
I hope that these guys learned their lesson to not randomly flash any "fancy" things to their phone. Always look for trusted sources.
I for myself don't even flash newly released roms or kernels. Better wait a week, check some feedback and then go for it.
Lazy Rich said:
Have fun finding someone that doesn't charge you an immense amount of money for that. Yeah, paying 100$ to some trustworthy ukrainian guy is probably better than buying a new phone.
I hope that these guys learned their lesson to not randomly flash any "fancy" things to their phone. Always look for trusted sources.
I for myself don't even flash newly released roms or kernels. Better wait a week, check some feedback and then go for it.
Click to expand...
Click to collapse
Nah, the cost of EDL account is about ten dollars. Its still much more better to pay 10 buck rather then spending 400 dollars on new or used phone
Lazy Rich said:
I for myself don't even flash newly released roms or kernels. Better wait a week, check some feedback and then go for it.
Click to expand...
Click to collapse
Yeah, luckily not everyone does it, otherwise you would have certain problems.
Just check source and if you completely paranoid build the ROM by your self...
So, yes. I did flash leaked arter. Needed EDL flash and phone was alive. Problem that now exists is,I get no network connection. Also had to restore IMEI and so on. Maybe somebody got a solution to bring back at least second Sim to life with mobile connection.
i thought the same where thinking the phone is back i had wlan working but then i played arround with imei to get it back in phone now its completey ****ed no wlan no sim :laugh::laugh::laugh:
---------- Post added at 21:06 ---------- Previous post was at 21:01 ----------
i also try to flash the leaked kernel to fully brick the phone but its not bricking my phone lol dunno how to get it bricked to start from begin xD
U need just wipe partitions and flash persist.img to get WLAN back
its not working write protected its not even working with modified fastboot flash_all.bat in edl mode .....
i also tryed with orginal .qcn file from friends phone i only replaced the imeis not even working
edit: i worked 3 days on it nothing is working i gave it up buying a new phone and stop waisting my time on this ****
I can help you to do edl flash in just 800 rupees call me 7351071470
Related
So I had previously rooted my SGSII, and decided to try installing CM7 on it. I used CWM Recovery and ran it off the SD card, and everything appeared to work fine. I think I had a bad/not fully functioning CWM or something, as it didn't list an option to backup anything (I'm guessing because I flashed the stock kernel after rooting?) Anyway, it will no longer boot. I can access download mode, but Odin fails everytime I try to flash anything back on there. When I try to boot my phone, I just get a "Firmware upgrade encountered an issue" error.
EDIT: I just tried again as I was writing this, after rebooting, reinstalling my drivers and rebooting my computer. I was able to get the Firmware to flash properly in Odin. Now I have my phone booting and getting stuck on the "Samsung Galaxy SII GT-I9100 splash screen... Doesn't seem to go any further than that though, unfortunately.
Any ideas what I can do? Is it possible that I need re-flash a bootloader or something ??
Any help would be supremely appreciated!
So I was just trying to re-install the Kernel, using the CF unsecured kernel, and it failed, but when I try to go into recovery mode, it looks as though it managed to install CWM Recovery. I have no idea what to do from here, and am sort of afraid to do anything for fear or bricking the phone completely...
I'm hoping someone out there knows how to fix this, I feel like such a tool
As long as you can get into download-mode, your phone isn't bricked.
If you switch from or to a TouchWiz-based ROM, you have to do a full-wipe in the recovery.
Sent from my GT-I9100 using XDA App
Go back to stock first via download mode via odin
Nah you're good. Similar thing happened to me at my first flashing attempt. Get your stock firmware from Intratech's thread, put the phone into download mode & flash the firmware via Odin.
Then maybe have another go at rooting the phone with the matching CFRoot kernel.
Porkchops said:
So I was just trying to re-install the Kernel, using the CF unsecured kernel, and it failed, but when I try to go into recovery mode, it looks as though it managed to install CWM Recovery. I have no idea what to do from here, and am sort of afraid to do anything for fear or bricking the phone completely...
I'm hoping someone out there knows how to fix this, I feel like such a tool
Click to expand...
Click to collapse
yes, if you can still go in download mode it's no so difficult..this "small brick" it's on of "Android things to do" once in your SGS2 life
Hi guys. I'm in a worst situation. As my phone after a failed ODIN downgrade from Android 2.3.6 to one stock kernel is completelly dead - it doesn't boot anymore - not even managed to put it back into download mode or revert to fact defaults (no keys, no lights not even battery charging displayed when pluged in) - tryed the USB jig also. Nothing worked.
The question is: Will Samsung manage to repair and how much will it cost - an average ammount offcourse. Because I guess it's out of the question to be considered a warranty issue. I guess it will be visible somebody have done smth to the ROM by a software approach....
This is the short story because I would bore you to discuss all the things I have been through - it was only my faoult out of stupidity
HELP!
I don't see why Samsung wouldn't fix it ? As to how much they'll charge you, I think you'll find that will vary from country to country (labour costs being variable, etc). No, I don't think you'll be able to have it repaired under warranty.
You might want to look at having it JTAG repaired by someone other than Samsung. This will possibly be cheaper than having Samsung repair it. Do a search on here/Google.
alexdonc said:
The question is: Will Samsung manage to repair and how much will it cost - an average ammount offcourse. Because I guess it's out of the question to be considered a warranty issue. I guess it will be visible somebody have done smth to the ROM by a software approach....
HELP!
Click to expand...
Click to collapse
Thank you very much. I have searched alot to actually understand - unfortunatelly for me it will cost... I saw on youtube a JTAG in action right now (cannot post the link yet). I understand now it is the only way. I'll keep you posted guys. Tomorrow I'll go to service.
I'm sorry it's going to cost Alex. A difficult thing to happen, I know
Here's a link for a JTAG repairer in the US who is also a member here, tho I see you've already found one. I'm sure doing it this way will be cheaper/probably faster than having Samsung do the repair as well.
alexdonc said:
Thank you very much. I have searched alot to actually understand - unfortunatelly for me it will cost... I saw on youtube a JTAG in action right now (cannot post the link yet). I understand now it is the only way. I'll keep you posted guys. Tomorrow I'll go to service.
Click to expand...
Click to collapse
Thax. Funny thing is that this is exactly the thing I found - the same mobiletechvideos in US Now I allready have an ideea of how much should cost that. Hopefully I'll find a local GSM repair shop with the posibilitty to unbrick it cheep - or at least not much than 50USD - in local currency ofcource.
I'm still thinking if it is possible to use an ATMEL copy process - like in the old times for EEPROMS - I have done that in the past. In theory it might work but I will never do it - alredy scared about what happened to my beloved droid.
Thx again Mistah and have a gr8 day and a wonderfull new 2012!
Yeah I've seen a report or two on here from people who have used his service & have been happy. Must admit I found his page when thought I'd bricked my phone after my first flash attempt messed up. Yeah you might be able to get it done cheaper somewhere local, and that will mean less time without the phone for you without the phone in mail from you to the US & back again.
Let us know how you get on, your experience will be a good guide for people in future who have the same problems as you.
No probs man, happy to give you the little help I did. You too Alex Hope you have a great year & you get your phone back & working soon
alexdonc said:
Thax. Funny thing is that this is exactly the thing I found - the same mobiletechvideos in US Now I allready have an ideea of how much should cost that. Hopefully I'll find a local GSM repair shop with the posibilitty to unbrick it cheep - or at least not much than 50USD - in local currency ofcource.
I'm still thinking if it is possible to use an ATMEL copy process - like in the old times for EEPROMS - I have done that in the past. In theory it might work but I will never do it - alredy scared about what happened to my beloved droid.
Thx again Mistah and have a gr8 day and a wonderfull new 2012!
Click to expand...
Click to collapse
Hello again. Solved right now. The service didn't charged me at all - I was kind of lucky after all. Unfortunately there are still some issues I have from the start. I'll keep on digging - software related.
Hi!
I just had the weirdest experience with my sgsii
I have been using the unofficial vsync patched cm10 rom for this modelfor the last month or so.
I have been updating at least one per week but this week I decided to give my phone a break and not flash it... i am actually really busy at job.
Suddenly tonight, the phone looked like when you have a SOD... so i just pulled the battery.
Now, it does not pass from the first logo stage, just prior to start booting.
I cannot access cwm recovery either, but download mode seems to work-
Now the odd thng is that i am attempting to flash somethng to get the phone working but it gets stuck in the step "NAND Write start!".... it goes no furter than that...
I have chosen the options auto reboot and f.reset time.
a pda file, phone and csc file from the eaked jb rom.....
The system I am attempting to flash from is a windows 7 pro 64 bit.... and odin is Odin3 v1.85...
Please, tell me i didnt get a brick and there is a way tofix it... :crying:
EDIT: Desperated, i tried to flash latest jb leak again, and chose the pit file that comes with it, which re-partitions the phone...
After 20 minutes not responding, i pulld the battery out... now i cannot even enter download mode....nothing....nada....
Sounds like you bricked it, good job.
Sent from my GT-I9100 using Forum Runner
GFXi0N said:
EDIT: Desperated, i tried to flash latest jb leak again, and chose the pit file that comes with it, which re-partitions the phone...
After 20 minutes not responding, i pulld the battery out... now i cannot even enter download mode....nothing....nada....
Click to expand...
Click to collapse
too bad never repartition unless you make your own pit file with heimdall .. if you would've wait a couple hours I just pmed you.
and for other people instead of flashing samsung's bricksquadroms you can flash CM9 resurrection edition. http://forum.xda-developers.com/showthread.php?t=1419102
Make a pit file with heimdall of your own device. Don't trust pitfile that comes with a rom.
I re-partitioned my device and i got like 3GB intern memory back.
There's probably a way to get your device alive. it isn't the mmc cap bug so. search some threads on xda about brickbugs etc of galaxy phones and you'll find people who hardbricked and unbricked their device.
Probably usb jig could get you into download mode i'm not sure though. Or else jtag. Ask some people over there they will know it
I will try to revive it with jig.... i must find the thingy though.,..... if not.. i will send it to the service but i'm not sure i'm on warranty....
Being not patient made me f*ck it up bad....
Any clue on how to recover a phone after re-partitioning.... i really don't know where to start...
EDIT: JIG does not switch it on either... why did i have to re-partition?!??!?!?!?!?!
That was a dumb move....... any more ideas?
If you cant enter recovery or download mode you have no choice but to JTAG repair or mobo replacement.
Hard brick.... on its way to service
Wish me luck..
Mobo replacement it is, this incident will at least teach you to be patient, I explained you my problem in PM, I waited for 1 week for USB jig to arrive from eBay then flashed stock ROM. I trust the f/w it came with the most.
Sent from my GT-I9100 using xda app-developers app
Sh4Dy said:
Mobo replacement it is, this incident will at least teach you to be patient, I explained you my problem in PM, I waited for 1 week for USB jig to arrive from eBay then flashed stock ROM. I trust the f/w it came with the most.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
USB JIG didn't work at all..... I have one and it was not able to boot the phone ....
Isn't this kind of brick fixable with Jtag?
Sent from my GT-I9100
Ok, before I repartitioned, making the problem worse, I was experiencing some kind of R/W problem..... there was something odd with the nand because I was able to boot in download mode, but not in recovery (CWM) mode....
Then, when I plugged the phone to the computer, Odin was able to recognize the phone.
I followed some thread around XDA to flash 4.1.2 leak from sammy and when I hit the "Start" button in Odin, it would not pass from the first stages, revealing that R/W or I/O problem.... the internal nand was, somehow broken.... it didn't read or write properly.... so, even If i could find a workaround, I would have lost some internal storage (some posts talk about around 3 Gb or something similar as lost space in these cases).... that is IF i had been able to fix it..... but then, that's what warranty is for..... so I gave it a last (dumb) try..... including the pit file, which attempted a format, which ended messing (i would say the f. word) everything up.
The good side is that unable to even boot, at least i lost the blue loading bar the vsync patched cm10 mod has in the first bootup screen.... which could have revealed to sammy that I was tempering with unofficial roms....
Lesson learned: Be patient people: But also, don't think this could not happen to you: The phone was perfectly working the last time I saw it... and I even was making some phone calls and browsing the internet.... I mean... it gave no prior symptoms or warnings... I t just died..... I guess I have to be glad I'm not one of those people whose phone gets caught up on fire on their pockets for malfunctioning.....
Now waiting for it to come back revived from samsung..... I have hope
hope it will be able to recover
Great: After losing the phone and past almost three months, samsung says the phone has been manipulated and the warranty is voided....
I wasn't able to flash back an original firmware prior to sending it to the tech service.....
What do you recommend me to do?
I guess paying for the repair would be quite expensive....
GFXi0N said:
Great: After losing the phone and past almost three months, samsung says the phone has been manipulated and the warranty is voided....
I wasn't able to flash back an original firmware prior to sending it to the tech service.....
What do you recommend me to do?
I guess paying for the repair would be quite expensive....
Click to expand...
Click to collapse
Well what is it you expect us to say, some secret magic word that will fix it for free?
The choice is pay for it to be fixed or dont.
So no magic word or secret passphrase so they will upgrade my device to a SGSIV for free?
Damn.....
I'm asking for advice, since I'm convinced the brick was not caused by flashing anything.....
Does anyone have any experience with this in the past to know more or less how expensive bill could I be facing for the repair?
GFXi0N said:
So no magic word or secret passphrase so they will upgrade my device to a SGSIV for free?
Damn.....
I'm asking for advice, since I'm convinced the brick was not caused by flashing anything.....
Does anyone have any experience with this in the past to know more or less how expensive bill could I be facing for the repair?
Click to expand...
Click to collapse
Dude, it WAS caused by flashing something.
Initially your device wasn't "bricked" and was likely a kernel issue and possibly a dirty usb data connection.
The point when it was bricked was when you tried flashing the pit file, had bad connection and you then pulling battery. This f**ked your nand chip up and only way to fix it is to replace motherboard.
You will need to either purchase a mobo replacement and replace it yourself or pay somebody to purchase/replace it for you. Probably looking at around £100.
When bricks happen, you really need to BRICK it before claiming warranty.
I've got a couple of guys here that own a PhD in bricking.
Brick is the new flash.
Sent from the little guy
Jig wasn't working
Flashing anyting.. even just a recovery wasn't working
FLashing official didnt work
Flashing CM didnt work either
Tested different cables and different ports
It was f*cked up already... anyway: 4 samsung devices owned: 3 gave problems of hardware..... that cannot be a coincidence...
Repartitioning erased my tracks, if anything... because the 3 key combo for recovery was working until then..... but either way they managed to access the memory somehow, I guess.....
GFXi0N said:
anyway: 4 samsung devices owned: 3 gave problems of hardware..... that cannot be a coincidence....
Click to expand...
Click to collapse
Maybe a PEBCAK?
GFXi0N said:
Jig wasn't working
Flashing anyting.. even just a recovery wasn't working
FLashing official didnt work
Flashing CM didnt work either
Tested different cables and different ports
It was f*cked up already... anyway: 4 samsung devices owned: 3 gave problems of hardware..... that cannot be a coincidence...
Repartitioning erased my tracks, if anything... because the 3 key combo for recovery was working until then..... but either way they managed to access the memory somehow, I guess.....
Click to expand...
Click to collapse
Don't blame the phone, blame the user.
Yeah, sure... anyway... thanks for the help... I hope some day you need it and someone will come not trying to mocking you..... anyway... this is the trend around here lately...
Happy trolling
Hello guys!
I need a big help!
I have a meizu pro 7 (128GB). Have a bootloop and want now flash again with the stockrom "Variation A".
I can start in fastboot variation.
Who can help me? I have downloaded the last flyme-rom.
What did i have to do to "unbrick" my phone?
Thanks for help!
Best regards peter
Hello guys!
I have solved the problem!
When you start the phone in "recovery mode" and connect the phone to a computer so you will find a drive with "recovery". At this drive you can copy an "update.zip" (a-rom) and start at the phone. So it will restart and reboot.
I hopy anyone can use it.
best regards
peter
Did you ever figure out if this is possible?
Im in a bootloop and the recovery on this phone only give 2 options ive been trying to figure out how to sideload but without a proper recovery i cant do iot
fastboot takes commands but without a bootloader unlock and a recovery worth a **** i think its a fools errand. meizu is no help ive heard either
If you have damaged the stock recovery image, there is no option to restore. you need to pack the phone and send it to a Meizu dealer for reflash.
I have a brand new pro 7 plus Stuck at the FLYME with the turning logo . Shame really I didn't do anything out of the ordinary and now it's a 600 paperweight. Where is a service e center ? Nightmare this is ......I even contacted Meizu directly they basically told me to go @#$% myself ...
herb9876 said:
I have a brand new pro 7 plus Stuck at the FLYME with the turning logo . Shame really I didn't do anything out of the ordinary and now it's a 600 paperweight. Where is a service e center ? Nightmare this is ......I even contacted Meizu directly they basically told me to go @#$% myself ...
Click to expand...
Click to collapse
If its on Logo rotating, the bootloader probably is fine. You need to find the same version of the software that you have had on your phone. Then you go to recovery and flash it. There are two ticks, before the flash process begins. Mark both. Flash, reboot and it should be as good as new.
I wish you were right but I've tried flashing every fw under the sun and it's either corrupt or too old. I'm all ears though if you have suggestions going forward . You are correct in describing my situation. Thanks in advance
herb9876 said:
I wish you were right but I've tried flashing every fw under the sun and it's either corrupt or too old. I'm all ears though if you have suggestions going forward . You are correct in describing my situation. Thanks in advance
Click to expand...
Click to collapse
Hi, I'm sorry dude but we're in the same boat. There is a problem with the Chinese variant, when you flash a beta A firmware and then flash the G firmware, the phone gets stuck and you can't update to any firmware anymore. We asked Meizu on the Flyme forums for a while (it's been a while our phone is useless), a moderator said not long ago that apparently they will release a new firmware which fixes that, I'm not certain about it but it's our best bet at this point. Either that, or if someone with enough knowledge manages to find a way to unlock the bootloader.
Here is the link to the bug report if you want to click the "I have the same" button and, maybe make them hurry a bit?
http://forum.flymeos.com/thread-38010-1-1.html
herb9876 said:
I wish you were right but I've tried flashing every fw under the sun and it's either corrupt or too old. I'm all ears though if you have suggestions going forward . You are correct in describing my situation. Thanks in advance
Click to expand...
Click to collapse
Have you searched this site ?
https://reameizu.com
how to enter in fastboot mode meizu pro 7 plus ?
Guys, I recently bought a redmi 5 plus that installed with miui 9.2.0.2.
It can randomly bricked after a few days use.
When it bricked, I cannot boot into recovery mode nor power up the device, the led light keep blinking when charging and nothing will ever show up on the screen no matter what I press.
All I do is take it to service centre and they will open up the device back cover and boot it, but they will never tell me what they did.
Now the third time I go to service centre, they accused me for unauthorised opening the back cover due to scratch at the side of the screen, so the warranty is void.
Please help me get out of this nightmare, I want to know if I flash global dev rom to it, the problem will be solved?
If yes, how do I do it? Is it possible to flash with the updater? Or only testpoint method? (Note: this device is installed fake vendor rom)
Teddy Thomas said:
Guys, I recently bought a redmi 5 plus that installed with miui 9.2.0.2.
It can randomly bricked after a few days use.
When it bricked, I cannot boot into recovery mode nor power up the device, the led light keep blinking when charging and nothing will ever show up on the screen no matter what I press.
All I do is take it to service centre and they will open up the device back cover and boot it, but they will never tell me what they did.
Now the third time I go to service centre, they accused me for unauthorised opening the back cover due to scratch at the side of the screen, so the warranty is void.
Please help me get out of this nightmare, I want to know if I flash global dev rom to it, the problem will be solved?
If yes, how do I do it? Is it possible to flash with the updater? Or only testpoint method? (Note: this device is installed fake vendor rom)
Click to expand...
Click to collapse
if your device is completely bricked then you have to do test point method. It is not very hard, and it will make your phone work again, flash chinese beta rom and unlock bootloader if you want then.
n0_xQuZe said:
if your device is completely bricked then you have to do test point method. It is not very hard, and it will make your phone work again, flash chinese beta rom and unlock bootloader if you want then.
Click to expand...
Click to collapse
Can I flash global development rom directly from a fake rom? From what I read in other thread, Chinese development rom will come out with error 86006
Personally i have a MEE7 version phone, you can check yours in the phone box. I had a fake rom and couldnt update or flash anything. So i did test point, flashed chinese developer rom and succesfully bind my account without any error whatsoever and no need for any vpn at all. So now i am only waiting for 15 days to go by and i can unlock.
n0_xQuZe said:
Personally i have a MEE7 version phone, you can check yours in the phone box. I had a fake rom and couldnt update or flash anything. So i did test point, flashed chinese developer rom and succesfully bind my account without any error whatsoever and no need for any vpn at all. So now i am only waiting for 15 days to go by and i can unlock.
Click to expand...
Click to collapse
I have the MET7 and did the test point method all flashed ok i too am now waiting the 15 days to unlock. also account binding worked first time.
No you cannot flash global rom over fake rom - it will brick the phone - tried and tested.
test point method to chinese developer rom, unlock bootloader and then flash global rom.
Hi,
Did anyone experience some issue in the OTA upgrade to V12.0.3.0.QFQEUXM?
Now, at the first reboot after the upgrade, my touch doesn't work anymore and to unlock I used an external mouse.
I thought the V12.0.3.0.QFQEUXM was one of the "safe" roms without the bricking bug... But still, the touch not working isn't exactly good
Did you overcome this issue?
Thanks
I bricked my Mi A# trying to go back to a earier rom. Please just wait for an OTA to fix this, since you have a OTG to use mouse, youll be able to install it from the phone itself. Good luck
Bysholo said:
I bricked my Mi A# trying to go back to a earier rom. Please just wait for an OTA to fix this, since you have a OTG to use mouse, youll be able to install it from the phone itself. Good luck
Click to expand...
Click to collapse
i have the same case, do u mean that if xiaomi launch new fixed update rom/loader of android 11 we can install/load it from flashdisk using OTG cable?
I am facing the same issue. The touchscreen doesn't work anymore. Please help!
I brought the phone to Xiaomi repair centre and... They're scamming me!
They don't give me back the phone if I don't pay 20€ or if I don't pay 80€ to repair the back camera glass that has a small crack (for 6 months). They don't either check the issue if before I don't pay WTF!!!
And, official Xiaomi support via email agrees that, before checking the phone, I have to repair at my expense any scratch!!! And that they don't know about any issue on the Mi A3 FW!!! As if the dozens of wrong firmware of the latest year never existed!!! I'm speechless!!!
kerahledrek said:
i have the same case, do u mean that if xiaomi launch new fixed update rom/loader of android 11 we can install/load it from flashdisk using OTG cable?
Click to expand...
Click to collapse
Sorry I couldn't respond earlier. No, I meant that you can use the mouse to get to the Options menu and install the OTA update directly from the phone.
Bysholo said:
Sorry I couldn't respond earlier. No, I meant that you can use the mouse to get to the Options menu and install the OTA update directly from the phone.
Click to expand...
Click to collapse
That' is the only hope!
P.S. Here in Italy Xiaomy doesn't repair your phone really for free! If you have some scratches on the back a small sign on the camera glass, etc... They pretend that you pay them to fix the visual glitches and then they will repair your phone for the s**t they did!
So, they release public statements that they will fix the issue, and then in reality they scam you...
mr-mauro said:
That' is the only hope!
P.S. Here in Italy Xiaomy doesn't repair your phone really for free! If you have some scratches on the back a small sign on the camera glass, etc... They pretend that you pay them to fix the visual glitches and then they will repair your phone for the s**t they did!
So, they release public statements that they will fix the issue, and then in reality they scam you...
Click to expand...
Click to collapse
Sorry to hear that. I have same problem, touch not working after update to A11, bricked after downgrade to 10. Then i bring to service center, they fix it for free, even with unlocked bootloader (I'm living in Vietnam).
Unfortunately, at least here in Italy, Xiaomi seems a very unprofessional company (to not say something worst)!
They are not fixing it, they pretend money to before repair and replace unrequested component that have scratches, before even trying to fix the s*it they did.
For my point of view, I wouldn't anymore suggest to anyone to buy them. Because, if then this is the service you get, you save more money with any other brand that has a professional after sale support.
I got back my phone, I had to pay for it because they weren't fixing it for free, despite it was a problem caused by them (that's a joke Xiaomi)!
However, I received a new fw and with a mouse connected via OTA I installed it and, now touch works... But still, WTF Xiaomi, you create a global issue and then you spill money from clients? I got rid of the phone now and my next phone this year won't be a Xiaomi
same issue here, won't buy Xiaomi smartphone next time for sure.
I have a question: if a rom is buggy, is buggy FOR ALL USERS. But if some user (like me) don't have any bug... Problably is not a xiaomi issue. It's a user issue that don't have the skills to apply an ota update without mistakes. For example first a11 killer ota bricked all phones. But 12.0.3.0 that i have installed two months ago...have touchscreen working perfectly. So Good luck with yours futures Samsung... But if you don't be able to update a phone, don't incolpe xiaomi.
Anyway... Digit this * # * # 64663 # * #* and make the specific test...
hello, i recieved the march 21 OTA update yesterday, and after the final reboot, my touchscreen doesn't work anymore,
did you find a solution? i don't have a usb-c adapter so i can't try with a usb-mouse.
thanks
arjo656 said:
hello, i recieved the march 21 OTA update yesterday, and after the final reboot, my touchscreen doesn't work anymore,
did you find a solution? i don't have a usb-c adapter so i can't try with a usb-mouse.
thanks
Click to expand...
Click to collapse
First try an hard reset. Or better a clean firmware installation. But before try a touchscreen test. If is a little software problemi, the test solve it with a sort of recalibration
wetito said:
First try an hard reset. Or better a clean firmware installation. But before try a touchscreen test. If is a little software problemi, the test solve it with a sort of recalibration
Click to expand...
Click to collapse
hello, how can i do those things if i can't unlock the phone? i can't enter my pin code or my unlock pattern
arjo656 said:
hello, how can i do those things if i can't unlock the phone? i can't enter my pin code or my unlock pattern
Click to expand...
Click to collapse
Mmmm.... I suggest you a clean system installation via fastboot or with miflash in edl mode
I'm afraid the new android security system will ask me for my unlock pattern during installation.
How to enter in the EDL mode?
hello, after almost 2 months i managed to solve my problem. because of this fuc.... covid, I could not cross the border to take my mobile phone to the after-sales service, so I ordered a usb adapter to be able to connect a keyboard and mouse, and suddenly I was able to skip the unlocking pattern and go to settings to check for available updates, and luckily for me there was one of 43mb! After installing this update, the touch screen works again !!
arjo656 said:
hello, after almost 2 months i managed to solve my problem. because of this fuc.... covid, I could not cross the border to take my mobile phone to the after-sales service, so I ordered a usb adapter to be able to connect a keyboard and mouse, and suddenly I was able to skip the unlocking pattern and go to settings to check for available updates, and luckily for me there was one of 43mb! After installing this update, the touch screen works again !!
Click to expand...
Click to collapse
2 mounths??? in ten minutes you could have done this: download miflash tool, download latest stock mia3 fastboot firmware (also ota incremental are online!) and flash it with miflash
wetito said:
2 mounths??? in ten minutes you could have done this: download miflash tool, download latest stock mia3 fastboot firmware (also ota incremental are online!) and flash it with miflash
Click to expand...
Click to collapse
how can i do my unlock pattern without the touchscreen and the phone connected to the computer?