Based on this post i've made this file to invert the MENU and BACK button on LineageOS 14.1
Instructions:
1- Flash the zip in recovery
2- Reboot
Before: ("BACK------HOME-----MENU")
After: ("MENU------HOME-----BACK")
It works fine! thanks! A2017U
I tried doing the editing myself on the generic.kl file nut I see that you did it in the synaptics.kl, i guess that's were I went wrong. Cheers!:highfive:
Just what I needed. Thank you very much...
XblackdemonX said:
Based on this post i've made this file to invert the MENU and BACK button on LineageOS 14.1
Instructions:
1- Flash the zip in recovery
2- Reboot
Before: ("BACK------HOME-----MENU")
After: ("MENU------HOME-----BACK")
Click to expand...
Click to collapse
Works like a charm. Thank you kindly OP!
Sent from my ZTE A2017U using Tapatalk
Awesome thank you.
Seems to work on my A2017G as well.
You can do this built into Los so this seems a bit pointless
Android4thewin said:
You can do this built into Los so this seems a bit pointless
Click to expand...
Click to collapse
Excellent contribution to the thread! #Kidding. Seriously? What you should have done was kept this to yourself or move on. While this may not apply to you, and you can maunally fix it yourself.. that defeats the purpose of XDA and general android hacking. Trying to alter things that isn't otherwise stock and make it as easy as possible.
Thanks for the work OP. I was looking into figuring this out today but you beat me to it.
nolimit78 said:
Excellent contribution to the thread! #Kidding. Seriously? What you should have done was kept this to yourself or move on. While this may not apply to you, and you can maunally fix it yourself.. that defeats the purpose of XDA and general android hacking. Trying to alter things that isn't otherwise stock and make it as easy as possible.
Thanks for the work OP. I was looking into figuring this out today but you beat me to it.
Click to expand...
Click to collapse
Yeah but it is already an option in Los so you dont even need to flash this just go to settings and under buttons change what they do. I don't mean to seem mean I'm just pointing out a blatant fact and that this is inefficient to reach your goal.
Android4thewin said:
Yeah but it is already an option in Los so you dont even need to flash this just go to settings and under buttons change what they do. I don't mean to seem mean I'm just pointing out a blatant fact and that this is inefficient to reach your goal.
Click to expand...
Click to collapse
No it is not. It is option to change onscreen buttons, not hardware. This is great find. Thanks again
kodrnusa said:
No it is not. It is option to change onscreen buttons, not hardware. This is great find. Thanks again
Click to expand...
Click to collapse
You can do hardware and software
Edit typo mend to say can't
Android4thewin said:
You can do hardware and software
Click to expand...
Click to collapse
Please post a screenshot because i cannot see it
XblackdemonX said:
Please post a screenshot because i cannot see it
Click to expand...
Click to collapse
Oh sorry I meant to type you can't do software and hardware.... Lol AC hates me
is it working on RR?
I installed the A2017LineageOS_N_Bootstack.zip on my axon7 G and now it stays at the ZTE boot logo. Is there any chance to install the A2017U_Nougat_Bootloader+ModemFix2.zip now ?
Hugh, wrong forum, I have to many taps open https://forum-lw-1.xda-cdn.com/images/smilies/biggrin.gif
WesTD said:
is it working on RR?
Click to expand...
Click to collapse
RR has is built in if you want I can give you screenshots as to where. Go to setting then buttons
Android4thewin said:
RR has is built in if you want I can give you screenshots as to where. Go to setting then buttons
Click to expand...
Click to collapse
No need anymore bro, it's working.
Hi, running 5.8.3 RR in Axon 7 rhere is no options like in stock was. And flashing the patch has zip-errors...
Working for lineage. Thank you!
bommelkopp said:
Hi, running 5.8.3 RR in Axon 7 rhere is no options like in stock was. And flashing the patch has zip-errors...
Click to expand...
Click to collapse
RR has SmartBar does it not? No need for the flashable zip then.
Go through and become familiar with the ROM's settings.
LG G3 D851, Tesla v4.4 ROM, MultiROM, Tapatalk 4.9.5
twrp-3.1.1-0-ailsa_ii.img and 14.1 lineage-14.1-20171106-nightly-axon7-signed.zip = works perfect but first boot after flashing about 10 min
Thank you so much!
Related
Hi!
I made patches which will fix some problems in CM13 based ROMs (CM13, Resurrection Remix, AICP etc)
1. ROM which you using on your phone have this bugs?
-no working auto-rotation
-sensors does not works as should
-phones just freezing, look like turned off
YOU NEED THIS:
1. Download my new, final patch LINK!
2. Install latest CM13 or another ROM based on CM, like RR, example link HERE
3. Install patch
4. Wipe caches
5. Reboot your phone
2. Phone just freezing? Auto-rotation, sensors etc works?
YOU NEED THIS:
1. Download this patch: LINK
2. Install latest CM13 or another ROM based on CM, like RR, example link https://www.cmxlog.com/13/g2m/
3. Install patch
4. Wipe caches
5. Reboot your phone
Thats all
*TESTED AND WORKS ON ALL NEWEST ROMS BASED ON CM13, FOR EXAMPLE Resurrection Remix
even if the newest CM13 will be fixed you can use my patches for older version of CM or if you use Resurrection Remix or similar ROM,
i'm sure it will be still usefull
THANKS
Hi Wypier.... Awesome job!!! A big THANKS for this patch. This will be a very good notice for all..
I just have a question... This method can working for cm14 alpha too??
Thanks thanks thanks. :good:
zampotonic said:
I Dev. Awesome job!!! A big THANKS for this patch. This will be a very good notice for all..
I just nave a question... This method can working for cm14 alpha too??
Thanks thanks thanks. :good:
Click to expand...
Click to collapse
Thanks
about cm14 - i dont think so.
WYPIERDAALAAC said:
Thanks
about cm14 - i dont think so.
Click to expand...
Click to collapse
thanks for your quick response. only to better understand ... you have already tried with 14 cm? otherwise I can try on my device. (If they do not use a different kernel! But sure it is different) Last question ... do you think it will be possible to adapt it to the CM14? because now you have found the cause of the problem. thanks again and sorry English
zampotonic said:
thanks for your quick response. only to better understand ... you have already tried with 14 cm? otherwise I can try on my device. (If they do not use a different kernel! But sure it is different) Last question ... do you think it will be possible to adapt it to the CM14? because now you have found the cause of the problem. thanks again and sorry English
Click to expand...
Click to collapse
I didnt tried. Kernel is for another fix. With new mobius kernel phone can wake after lock, on latest cm13 kernels phone just freezing after some time. The problem was good know, but i think no one tried or cant find right libs. I will trying to find one right because not all stuff of patch is needed i think but it works. If the libs from similar phone could works on g2m we can try it on cm14 for g2m.
There will be no problems with irrc patch?
Cherry M said:
There will be no problems with irrc patch?
Click to expand...
Click to collapse
Why would be?
of course no, no problems - but anyway you can reflash irrc patch.
NEW VERSION, THREAD UPDATED
-Cleaned package
-Fixed music player and file manager problems
-Root issues if exist also fixed
-Reduced weigh and generally keeps system libs updated for example camera or stagefright libs which was replaced needlessly before.
WORKS PERFECT BRO!!!! Thank you!!!
thank you works well....(Resurrection Remix)
Hey, new update.
I'm suprised no one seen that visualization of music does not work
nevermind
-cleaned again, less number of libs replacment
-new kernel included (you can install MobiusM kernel if you want but you dont have to now)
-music visualization fixed
I hope it's a final version (it looks it is) thanks for using, good words and testing.
NEW LINKS IN FIRST POST
ps remember, every new update you must install on fresh system.
You're great! All works well Thank you! Greetings from Poland! Good luck!
Where is the source code for your changes?
mttronc said:
Where is the source code for your changes?
Click to expand...
Click to collapse
its not built by source
WYPIERDAALAAC said:
its not built by source
Click to expand...
Click to collapse
So which ROM did you take the libs from?
mttronc said:
Where is the source code for your changes?
Click to expand...
Click to collapse
mttronc said:
So which ROM did you take the libs from?
Click to expand...
Click to collapse
from 20160820-SNAPSHOT, why you asked?
WYPIERDAALAAC said:
from 20160820-SNAPSHOT, why you asked?
Click to expand...
Click to collapse
Just out of curiosity. Hoped there might be a real fix for this issue.
mttronc said:
Just out of curiosity. Hoped there might be a real fix for this issue.
Click to expand...
Click to collapse
yes, you can be sure now all works good with patch. I think will be no official fix because they are focused on CM14 and this bugs are not made by CM team as I know.
The fix is just a rollback to the old sensors drivers.
mobiusm said:
The "fix" is just a rollback to the old sensors drivers.
Click to expand...
Click to collapse
Yes, but worse is nothing bro... At least he was kind enough and trouble to somehow solve this little problem that bothered more than one...
mobiusm said:
The "fix" is just a rollback to the old sensors drivers.
Click to expand...
Click to collapse
Now I feel that you're mean to me little bit, are you?
So why no one else did something after two months if it's just old libs with kernel?
tell you something, no difference between them so this is real "fix" of this bothersome bug/s.
Fix is fix.
I respect you and I want little respect for me
If I got you wrong - sorry.
Hi All,
I found this on AFhost - https://www.androidfilehost.com/?fid=457095661767104845
Anyone knows where can i find the original thread? I am unable to find any results in search.
Cheers
Anyone?
aliusman999 said:
Anyone?
Click to expand...
Click to collapse
Have you flashed it?
Not the first CM14.1. I think that you might find a more up to date version over at - https://androidfilehost.com/?w=profile&uid=95897840722645866 and his version for the Moto X Style (Clark) works very well. No idea about Flounder as I am currently back on stock Nougat running DP2.
RancidPenguins said:
Have you flashed it?
Click to expand...
Click to collapse
No , I wanted to know the original thread so can check out for bugs
lmulli said:
Not the first CM14.1. I think that you might find a more up to date version over at - https://androidfilehost.com/?w=profile&uid=95897840722645866 and his version for the Moto X Style (Clark) works very well. No idea about Flounder as I am currently back on stock Nougat running DP2.
Click to expand...
Click to collapse
Nice, but who is this developer?
aliusman999 said:
Nice, but who is this developer?
Click to expand...
Click to collapse
Hashbang. He also maintains some Aicp ROMs.
Sent from my Nexus 9 using Tapatalk
lmulli said:
Hashbang. He also maintains some Aicp ROMs.
Click to expand...
Click to collapse
I couldn't find his threads on xda though
This isn't my build, however I do have a CM14.1 build which works with my Nexus 9, no visible bugs. This is built unmodified from CM source, apart from removing forceencrypt. I would post on the Dev section, but my post count is too low. If there's enough interest, I'll upload it and do twice weekly builds?
Edit:
So if anyone wants a test drive, try https://harryyoud.co.uk/cyanogenmod/ which has a build from yesterday
BE AWARE: forceencrypt is enabled by default here, so if you don't want encryption flash ElementalX or another custom kernel (or maybe FED)
aliusman999 said:
I couldn't find his threads on xda though
Click to expand...
Click to collapse
A quick search on Xda came back with http://forum.xda-developers.com/search.php?searchid=430683718 for the threads he has started.
hazzer said:
This isn't my build, however I do have a CM14.1 build which works with my Nexus 9, no visible bugs. This is built unmodified from CM source, apart from removing forceencrypt. I would post on the Dev section, but my post count is too low. If there's enough interest, I'll upload it and do twice weekly builds?
Edit:
So if anyone wants a test drive, try https://harryyoud.co.uk/cyanogenmod/ which has a build from yesterday
BE AWARE: forceencrypt is enabled by default here, so if you don't want encryption flash ElementalX or another custom kernel (or maybe FED)
Click to expand...
Click to collapse
Nice
lmulli said:
A quick search on Xda came back with http://forum.xda-developers.com/search.php?searchid=430683718 for the threads he has started.
Click to expand...
Click to collapse
You search link takes me to my subscribed threads
aliusman999 said:
You search link takes me to my subscribed threads
Click to expand...
Click to collapse
When I clicked the link, it was empty! I wonder if XDA use different ID's on a daily basis - would have thought that they would have been statically assigned to each. Anyway, his profile is http://forum.xda-developers.com/member.php?u=4630246 (assuming that doesn't change!) You can see what threads/posts he has made from there. Quite active.
Use.
Installation using TWRP
Thank you say the creator, I have only a little to fix it.
alex9yust
https://forum.xda-developers.com/member.php?u=4206648
Anyone tested and can confirm it works?
Doman said:
Anyone tested and can confirm it works?
Click to expand...
Click to collapse
It works, tested in rr [2017/01/18], and blissmallow[land][19.01.2017].
Doman said:
Anyone tested and can confirm it works?
Click to expand...
Click to collapse
it's work for L.os but i don't change by finger printer guesue
**** YEAH!!!!
Working super fine, thx thx thx
Tested on RR hridayhs and BlissPop
Perfectly working on lineage os by zwliew ?
Just flash it with twrp?
forever4fter said:
Just flash it with twrp?
Click to expand...
Click to collapse
Yes.
Thanks for sharing. Can I share it to Chinese MIUI forum with original post link and credits?
Yappuccino said:
Thanks for sharing. Can I share it to Chinese MIUI forum with original post link and credits?
Click to expand...
Click to collapse
No problems.
works on cm, with unofficial source also. nice work.
DENWER9008 said:
Yes.
Click to expand...
Click to collapse
Thanks a lot!
how to know of my redmi 3s prime supports goodix fingerprint?
Subhampaul12 said:
how to know of my redmi 3s prime supports goodix fingerprint?
Click to expand...
Click to collapse
If the fingerprint doesn't work and there is no option in Settings to configure it then it is Goodix If so apply the fix via TWRP.
I could finally move from MIUI Much appreciate. Works perfectly on ResurrectionRemix-M-v5.7.4-20170118-land.
DENWER9008 said:
Use.
Installation using TWRP
Thank you say the creator, I have only a little to fix it.
alex9yust
https://forum.xda-developers.com/member.php?u=4206648
Click to expand...
Click to collapse
It's not working for me - flashed the fix directly after installing cm13. Got the option to register fingerprint but right before I can scan my finger it stops the process with: (roughly translated from german) "Registration not completed. Error on fingerprint registration, try again or try another finger". This is without touching the sensor at all.
Any ideas?
It worked for me. I installed it along with the latest RR build and worked normally. I have 2 fingers registered.
Sorry my bad english
I had a quick look at the zip and it essentially "patches" the system to deal with Goodix. You will need kernel support as well though, and that's likely the cause why it's not working for everyone
Work for me.
Well done, great job for this.. i flashed in lineageos and worked.. i just need a more battery life with other rom.
Thanks a lot dude..
How exactly should FP sensor work? It works for unlocking fine, but on my device it also works a little bit like a trackpad. When I touch it (on main screen), it select an app, when I touch it again, it launches that app. In app, it execute various functions ("new post" in email, it select an option in menu, switches radio button, ...). Is it correct, or is it a bug? Is this really intended feature, which I just didn't understand? Because it's annoying more then others . Thx for answer in advance.
edit: So, that was it. Flashed fix and no more odd behaving. But it doesn't work at all. Neither for unlocking. "Registration was not complete..."
Trust me, it works :fingers-crossed:
Ok guys, the time arrived, just pushed O 32.0 trough OTA, this update is the latest one relative to Oreo and TugaPower ROM.
It was a long run, thanks all for the support.
April security patch its included in O 32.0
Rom link: https://tugapower.net/TP/OP1/OREO/TugaPowerO32_OP1.zip
MD5: ec155ff2a19f4139cf80e2bd142bb4c8
Reserved
Bugs report:
Most of the third apps are not being able to acess camera. Will try to debug over the week and see if can fix.
WhatsApp its confirmed working.
Third part camera apps confirmed working beside stock cam.
Camera FV5
Open camera
https://forum.xda-developers.com/showpost.php?p=75983266&postcount=85
Using panorama mode on stock cam will FC cam, bug for the time being, to be able to use cam again just clear cam cache and data prior to open again.
Still downloading!
Can we use twrp-3.1.1-x_tugapower?
Update: I need to use official https://eu.dl.twrp.me/bacon/twrp-3.2.1-0-bacon.img.html
Enviado do meu A0001 através do Tapatalk
DanielFran said:
Still downloading!
Can we use twrp-3.1.1-x_tugapower?
Enviado do meu A0001 através do Tapatalk
Click to expand...
Click to collapse
Should be just fine. Advise to use latest oficial because not being too much over TWRP the last months, on my device tested with latest oficial 3.2.1-0, but think 3.1.1-x should be still up to the work
Thanks buddy!
Many, many thanks for your hard work on this ROM that I followed on Telegram...
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Click to expand...
Click to collapse
Quick Question since my device is encrypted. How do I remove the encryption when I have a phone which does not boot?
Much thanks for the ROM
Does anyone know how to get pixel navbar with the animation? I tried looking through substratum themes but the only ones I found are without the animation.
Saplaran said:
Quick Question since my device is encrypted. How do I remove the encryption when I have a phone which does not boot?
Much thanks for the ROM
Click to expand...
Click to collapse
You format your data, factory reset does not remove encryption, format data removes
This rom is the best ever Oreo for bacon. Loving it so much:good:
well well well, we have the Tuga Oreo stable now...
gr8 work mate..
downloading it now shall test and report back..
regards
Great to see this! @danieldmm is this compiled with 64 bit Binder APIs? I'd love to pair it to Thunder Kernel 3s for sultanized camera!
Sent from my A0001 using Tapatalk
The Rom is super fine, love new icon from Lineage. Perfect beauty, only thing missed is color control
It would be nice to have the brightness bar at the bottom, like in lineageOS
pippoaacc said:
Great to see this! @danieldmm is this compiled with 64 bit Binder APIs? I'd love to pair it to Thunder Kernel 3s for sultanized camera!
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
LineageOS changed quite long for 64-bit binder.
https://github.com/LineageOS/androi...on/blob/lineage-15.1/BoardConfigCommon.mk#L62
if you try let us know how it goes with kernel
Thanhtho96 said:
The Rom is super fine, love new icon from Lineage. Perfect beauty, only thing missed is color control
Click to expand...
Click to collapse
Color control will be implemented in future rom update.
Macmoc16 said:
It would be nice to have the brightness bar at the bottom, like in lineageOS
Click to expand...
Click to collapse
No idea what you are talking mate, brightness bar in this rom is stock LineageOS, never saw brightness bar on bottom over LineageOS.
Always a pleasure to see you in action, Daniel. Thank you so much for your dedication to the Bacon community!
edit: + updated my ROM index
Can't we install it with TWRP 3.1.0 ... m getting error : 7 while flashing the ROM ... help
gk4218 said:
Can't we install it with TWRP 3.1.0 ... m getting error : 7 while flashing the ROM ... help
Click to expand...
Click to collapse
Need more detail about the error, read all the letters and post what it says, usual prior to the error 7 letters it should have something written.
If you prefer take a screenshot and post here
Timmmmaaahh said:
Always a pleasure to see you in action, Daniel. Thank you so much for your dedication to the Bacon community!
edit: + updated my ROM index
Click to expand...
Click to collapse
Guess you just missed to make the post over that thread saying you updated the index
I also get an error - TWRP-3.1.1-5 TUGA-POWER. (Dirty flash rom - from/over 8.1.0r14 Agent_fabulos)
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
new build the problem detection card corrected sim recognizes them
the bad the camera does not work and is slow.
Download link: https://github.com/EnesSastim/Downl...A-2018-09-20/PixelExperienceP-arm64-aonly.zip
sgt_peppers said:
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
The sim card it's not working in my case ..any suggestion?
Xiaby said:
The sim card it's not working in my case ..any suggestion?
Click to expand...
Click to collapse
Not in my particular case. Maybe flashing magisk?
sgt_peppers said:
Not in my particular case. Maybe flashing magisk?
Click to expand...
Click to collapse
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Xiaby said:
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Click to expand...
Click to collapse
works perfect just that you notice the temperature is somewhat high at times
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
Thank you trying it later
Xiaby said:
Thank you trying it later
Click to expand...
Click to collapse
Restart my device and now the SIM does not recognize me
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
could ytou please share a link to the latest firmware? I cannot seem to find it on this site?
CAn i just use TWRP?
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Andrikkos said:
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Click to expand...
Click to collapse
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
The_real_hati said:
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
Click to expand...
Click to collapse
Can you share the firmware link ?
Andrikkos said:
Can you share the firmware link ?
Click to expand...
Click to collapse
https://xiaomi.eu/community/
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
yes finally lol. Thanks a bunch i could not find the firmware anywhere
---------- Post added at 06:44 AM ---------- Previous post was at 06:38 AM ----------
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
Mate? No firmware/ Just another site link to get lost in? :-\
Bryceicle1971 said:
Mate? No firmware/ Just another site link to get lost in? :-\
Click to expand...
Click to collapse
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
The_real_hati said:
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
Click to expand...
Click to collapse
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Bryceicle1971 said:
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Click to expand...
Click to collapse
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
https://androidfilehost.com/?fid=1322778262903998408
The_real_hati said:
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
Click to expand...
Click to collapse
Whatever. Your being obnoxious. Given up on Android P. Overheats an RIL issues. Every time. And you just proved my point
sgt_peppers said:
Restart my device and now the SIM does not recognize me
Click to expand...
Click to collapse
Did yuo find any solution?