Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
new build the problem detection card corrected sim recognizes them
the bad the camera does not work and is slow.
Download link: https://github.com/EnesSastim/Downl...A-2018-09-20/PixelExperienceP-arm64-aonly.zip
sgt_peppers said:
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
The sim card it's not working in my case ..any suggestion?
Xiaby said:
The sim card it's not working in my case ..any suggestion?
Click to expand...
Click to collapse
Not in my particular case. Maybe flashing magisk?
sgt_peppers said:
Not in my particular case. Maybe flashing magisk?
Click to expand...
Click to collapse
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Xiaby said:
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Click to expand...
Click to collapse
works perfect just that you notice the temperature is somewhat high at times
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
Thank you trying it later
Xiaby said:
Thank you trying it later
Click to expand...
Click to collapse
Restart my device and now the SIM does not recognize me
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
could ytou please share a link to the latest firmware? I cannot seem to find it on this site?
CAn i just use TWRP?
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Andrikkos said:
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Click to expand...
Click to collapse
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
The_real_hati said:
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
Click to expand...
Click to collapse
Can you share the firmware link ?
Andrikkos said:
Can you share the firmware link ?
Click to expand...
Click to collapse
https://xiaomi.eu/community/
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
yes finally lol. Thanks a bunch i could not find the firmware anywhere
---------- Post added at 06:44 AM ---------- Previous post was at 06:38 AM ----------
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
Mate? No firmware/ Just another site link to get lost in? :-\
Bryceicle1971 said:
Mate? No firmware/ Just another site link to get lost in? :-\
Click to expand...
Click to collapse
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
The_real_hati said:
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
Click to expand...
Click to collapse
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Bryceicle1971 said:
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Click to expand...
Click to collapse
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
https://androidfilehost.com/?fid=1322778262903998408
The_real_hati said:
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
Click to expand...
Click to collapse
Whatever. Your being obnoxious. Given up on Android P. Overheats an RIL issues. Every time. And you just proved my point
sgt_peppers said:
Restart my device and now the SIM does not recognize me
Click to expand...
Click to collapse
Did yuo find any solution?
Related
Hello Devs....
I found one thread in MI official forum about Nitrogen OS 7.1 with substratum stable.
Please refer below link & tell whether is it possible to port for our RN3 Pro.
It has lots of customization options.
Here is the link:
http://en.miui.com/thread-417072-1-1.html
Waiting for reply.
Thanks in advance.
Yogendra Kher said:
Hello Devs....
I found one thread in MI official forum about Nitrogen OS 7.1 with substratum stable.
Please refer below link & tell whether is it possible to port for our RN3 Pro.
It has lots of customization options.
Here is the link:
http://en.miui.com/thread-417072-1-1.html
Waiting for reply.
Thanks in advance.
Click to expand...
Click to collapse
Have you tested the rom?
Tested a bit, looks really great! (Installed the jan02 rom and after the fingerprint fix)
Use the stock Google camera and working good, taking pictures (sometimes out of flash, but avarage good), recording video in 4k without problem.
When make a call the phone go to "do not disturb", after the call get back to normal.
In the rom have minimal usefully options to mod, by the way we have a very good and simple AOSP experience.
Only used 30 minutes, but the battery only fall 3% (I know, no syncing a lot of apps, only installed and checked a few, but it's good)
Don't test the vulcan api, because don't install gapps, just only some apps for testing.
So thanks, I think this rom on my top 3!
Its in testing from what I can see.
I was using it all day yesterday and I must say its amazing. No cam or flashlight issue.
I had a 3-4 random reboots though. Hope that gets fixed soon.
Here are some screenshots
Tested it. Have to say its a great rom, probably the best for me! Goodix fp is working without any patches. Camera and flashlight work, but still buggy same like other nougat roms.
Not sure whether vulkan api is working.
adizz4 said:
Its in testing from what I can see.
I was using it all day yesterday and I must say its amazing. No cam or flashlight issue.
I had a 3-4 random reboots though. Hope that gets fixed soon.
Here are some screenshots
Click to expand...
Click to collapse
Is there an official thread or guide for it? For kenzo, as the link provided is for Mi3 and Mi4.
ASDFking said:
Is there an official thread or guide for it? For kenzo, as the link provided is for Mi3 and Mi4.
Click to expand...
Click to collapse
http://xyyx-dev.ru/nitrogen-os/testing/nougat_7.1/kenzo/
ASDFking said:
Is there an official thread or guide for it? For kenzo, as the link provided is for Mi3 and Mi4.
Click to expand...
Click to collapse
There's no official thread at the moment AFAIK. I'm sure it'll be up once the testing is done.
But the test builds are mentioned above in case you want to give it a try.
irul.monster said:
Tested it. Have to say its a great rom, probably the best for me! Goodix fp is working without any patches. Camera and flashlight work, but still buggy same like other nougat roms.
Not sure whether vulkan api is working.
Click to expand...
Click to collapse
What about volte. And can you click hdr in google camera. Someother changes from cm.
No other changes...pretty good, but not as lineage currently
Yogendra Kher said:
Hello Devs....
I found one thread in MI official forum about Nitrogen OS 7.1 with substratum stable.
Please refer below link & tell whether is it possible to port for our RN3 Pro.
It has lots of customization options.
Here is the link:
http://en.miui.com/thread-417072-1-1.html
Waiting for reply.
Thanks in advance.
Click to expand...
Click to collapse
I think this thread should be in kenzo Roms section
http://xyyx-dev.ru/nitrogen-os/testing/nougat_7.1/kenzo/
where is the officialy forum for kenzo on to rom nitrogen os
Cant flash SuperSu 2.79..??? is the rom prerooted..??
$lim $hady said:
Cant flash SuperSu 2.79..??? is the rom prerooted..??
Click to expand...
Click to collapse
yes
Can anyone provide full review of this ROM. Anyone who is using latest build. Full feedback will be highly appreciated.
Minions007 said:
yes
Click to expand...
Click to collapse
There is no root option under developer options.. and i wont get the supersu icon when i flash the supersu 2.79 zip
$lim $hady said:
There is no root option under developer options.. and i wont get the supersu icon when i flash the supersu 2.79 zip
Click to expand...
Click to collapse
I am using the latest build and it has phh's superuser.
There is no need to flash supersu 2.79 zip root is avilable already
manudhomra said:
Can anyone provide full review of this ROM. Anyone who is using latest build. Full feedback will be highly appreciated.
Click to expand...
Click to collapse
everything working fine camera video volte out of the box xender(for file sharing) substratum battery life very good . I used it since 4 days faced not a single reboot. very stable.
sometime flashlight from toggle not working and with camera also.
manudhomra said:
Can anyone provide full review of this ROM. Anyone who is using latest build. Full feedback will be highly appreciated.
Click to expand...
Click to collapse
custom header are available,have not seen them in any nougat except Nitrogen os uptil now but no animation are available :good:
Not by me. I've didn't try yet. I'll test it tomorrow. If someone test it please comment to topic.
Here is resource.
https://4pda.ru/forum/index.php?showtopic=778560&st=4820#entry60370189
direct rom link: https://cloud.mail.ru/public/3s74/kp65vHy6b
About ROM: Firstly just install rom and sound fix (or other fixes which you used) and boot. Then flash gapps pack. Setup Wizard has problem on me. I tried stock versiyon 20160408. Maybe other one is okay.
Sound is good. It has Pixel UI blue, not green.
P.S. If you use Sound Fix v4.1 please flash this one. Original one has build.prob and it changes to Android version and other things related to build.prob.
https://www.androidfilehost.com/?fid=457095661767153882
Source-Code: https://github.com/MoKee/android_device_zte_axon7
Edit : It's for both variants.
How do we know it's safe and legit?
TheLastSidekick said:
Edit : It's for both variants.
Click to expand...
Click to collapse
Have you tried it out yet? How's it running?
---------- Post added at 03:21 AM ---------- Previous post was at 03:20 AM ----------
borijess said:
How do we know it's safe and legit?
Click to expand...
Click to collapse
Wondering this also. Have it downloading, but waiting to flash.
borijess said:
How do we know it's safe and legit?
Click to expand...
Click to collapse
By flashing it.... Guess someone will have to bite the bullet
I'm tempted to try this but I don't have my laptop with me to unbrick if it does brick.
crashnova said:
I'm tempted to try this but I don't have my laptop with me to unbrick if it does brick.
Click to expand...
Click to collapse
I'll finish downloading I'm about 15 mins and will flash
jimbo77 said:
I'll finish downloading I'm about 15 mins and will flash
Click to expand...
Click to collapse
Let me know how that goes. I'll be up for a while and hella stoned. Lol.
Booted just fine. Feels snappy ,just need to figure out how to make the wifi work using my kernel.
up and running with supersu, zte cam, sound fix is done. everything works so far.
Working pretty well for me so far. Extremely smooth.
Hello,
after i Install Gapps i have no install Instruction.Can anyone confirm that?Im directly in Android os.
edit:For me ACIP Rom work smoother
Quickly you have time to monitor our forum and post links. How to firmwares, like it?)
An AOSP ROM only available on a Russian (' half legal ') forum?
Maybe it's not a good idea to use such kind of ROMs without proper github sources.
This post goes against the rules. Its gotta be your own work, not some random link to a forum in another language. You can make reference to it in the general section, but not here. Sorry
Please one of mods move thread to Q&A section or somewhere else.
About ROM: Firstly just install rom and sound fix (or other fixes which you used) and boot. Then flash gapps pack. Setup Wizard has problem on me. I tried stock versiyon 20160408. Maybe other one is okay.
Sound is good. It has Pixel UI blue, not green.
P.S. If you use Sound Fix v4.1 please flash this one. Original one has build.prob and it changes to Android version and other things related to build.prob.
https://www.androidfilehost.com/?fid=457095661767153882
SilentEYE said:
An AOSP ROM only available on a Russian (' half legal ') forum?
Maybe it's not a good idea to use such kind of ROMs without proper github sources.
Click to expand...
Click to collapse
I used these sources:
Source-Code: https://github.com/MoKee/android_device_zte_axon7
Hey Guys just 1 question. Does this Rom Supports Multilanguage?
yes
gamer864443 said:
Hey Guys just 1 question. Does this Rom Supports Multilanguage?
Click to expand...
Click to collapse
Yes.
I am looking like a noob guy who xda use to makes memes on them but i am asking because mi 3 & 4 already got oreo built. are we getting oreo soon or it will take some time?
zeeshanbage said:
I am looking like a noob guy who xda use to makes memes on them but i am asking because mi 3 & 4 already got oreo built. are we getting oreo soon or it will take some time?
Click to expand...
Click to collapse
Don't expect it to come anytime soon, if at all.
Currently, we don't know if ANYONE is working / going to begin work with the source to get a bootable ROM, let alone add features on top and deem it "stable"
Perhaps we could turn this thread into an informative one, where if anyone knows that someone is working on O, we could get info updates.
As far as my experience is concerned, it'll take at least till November / December to get a daily driver build of O (considering that someone is working on it)
zeeshanbage said:
I am looking like a noob guy who xda use to makes memes on them but i am asking because mi 3 & 4 already got oreo built. are we getting oreo soon or it will take some time?
Click to expand...
Click to collapse
WHY?
vulkan
Word on the street is that OPX will never have the Vulkan support needed for O
oneplus one already has it so not too long for onyx
LOS 15
@YumeMichi made lineage-15.0-20170828-UNOFFICIAL-onyx.zip.
There is probably also a newer kernel:
boot.img 29-Aug-2017 10:21 - 10 MB
I do not test onyx, so someone can check if anything works.
ze7zez said:
@YumeMichi made lineage-15.0-20170828-UNOFFICIAL-onyx.zip.
There is probably also a newer kernel:
boot.img 29-Aug-2017 10:21 - 10 MB
I do not test onyx, so someone can check if anything works.
Click to expand...
Click to collapse
links not working??
Anybody flshed it so far?
ze7zez said:
@YumeMichi made lineage-15.0-20170828-UNOFFICIAL-onyx.zip.
There is probably also a newer kernel:
boot.img 29-Aug-2017 10:21 - 10 MB
I do not test onyx, so someone can check if anything works.
Click to expand...
Click to collapse
It boot successfully and seem works well.
(SIM card and camera doesn't work
It did boot
But sim card and camera does not work
Looks beautiful
Yhank you!!!
Will defently wait for updates
ze7zez said:
@YumeMichi made lineage-15.0-20170828-UNOFFICIAL-onyx.zip.
There is probably also a newer kernel:
boot.img 29-Aug-2017 10:21 - 10 MB
I do not test onyx, so someone can check if anything works.
Click to expand...
Click to collapse
Guys! This is legit!
@YumeMichi thnku for build. Tried and tested. and its beautifull. It flashedwithout any issue.
Camera and mobile network is not working. So it can't be used as daily driver. So i m getting back to old rom. Thnks though
waiting for further builts.
There is an other Build for 30th... seems bigger... I am curious whats fixed....
https://rom.ikke.moe/lineage-15.0-20170830-UNOFFICIAL-onyx.zip
EDIT: RIL does't work yet. WiFi and BT works fine..
pawankonjarla said:
There is an other Build for 30th... seems bigger... I am curious whats fixed....
https://rom.ikke.moe/lineage-15.0-20170830-UNOFFICIAL-onyx.zip
EDIT: RIL does't work yet. WiFi and BT works fine..
Click to expand...
Click to collapse
yep tried it . also installed open gapps. http://www.cyanogenmods.org/forums/topic/gapps-lineageos-15-android-oreo-roms/
working smoothly except ril and camera. camera almost opens and catches the first frame but crashes immediately.
this is looking good.
psychem said:
yep tried it . also installed open gapps. http://www.cyanogenmods.org/forums/topic/gapps-lineageos-15-android-oreo-roms/
working smoothly except ril and camera. camera almost opens and catches the first frame but crashes immediately.
this is looking good.
Click to expand...
Click to collapse
Do you know any flashable RIL from LOS14.1? Just to try flashing and see if it works..
New build 31/8
Anyone tried?
I cant post links so..
Queemz said:
Anyone tried?
I cant post links so..
Click to expand...
Click to collapse
31st build has ril working guys!!!
Only camera fix is left .
hello ,can someoane please give another mirror for the boot.img ? I also want to test this sweet oreo
psychem said:
31st build has ril working guys!!!
Only camera fix is left .
Click to expand...
Click to collapse
Hey, thanks for the info.
Can you confirm that gps is working good?
@uCristian you do not need the boot img if you are in the new bootloader (oos 3+ or any n rom)
Queemz said:
Hey, thanks for the info.
Can you confirm that gps is working good?
@uCristian you do not need the boot img if you are in the new bootloader (oos 3+ or any n rom)
Click to expand...
Click to collapse
Will confirm in the next build. Just restored backup.
Sent from my ONE E1003 using XDA-Developers Legacy app
I compiled the GSI overnight, its aosp_arm64_a Legacy GSI, because the ones I keep downloading are all August security patch and I wanted it a little more up to date. I got the source directly from google and built it myself. AB is now uploaded as aosp_arm64_ab. A only is also up as aosp_arm64_a-aosp. I ran it on my One Plus 5, NFC was buggy but the camera, ril, Bluetooth, wifi, and everything I tried out worked. this is vanilla, so its bare bones. no apps besides the basics, no mods or any customizing. As this is a GSI it should be useable on many devices, I can only help you with the devices that I own, pixel XL and one plus 5. If you have a device other then that, you will have to find help from someone knowledgeable about that device. I have had success using twrp and fastboot to flash the system image. I was told doing it via fastboot is the best, so you can disable verified boot, then flash, then format all in one shot. My device did not require me to disable the verify boot. From my end it was literally as simple as 3 commands via fastboot and then restart the device and I was in. I flashed a 50mb gapps package from xda here, and magisk. took some photos, connected my Bluetooth speaker, made a call. sent some texts, installed a few apps. I will be staying on stock. But only because my device has stock pie, and the theming from one plus far trumps google.
aosp_arm_a-userdebug and aosp_arm_ab-userdebug added
https://mega.nz/#F!Xh4g2KSB!EJIGQtvLFKzHzqKXmZI7tg
Sources: https://source.android.com/setup/build/gsi
Do you find it smoother than HOS Pie Beta ?
Thanks for your share! Awesome, I don't need/use NFC.
korm85 said:
Do you find it smoother than HOS Pie Beta ?
Click to expand...
Click to collapse
It's very fast. install and boot was very fast. but I just discovered my home button does not work. however I don't assume that would be a difficult fix. the back and pages button are working. its very bare tho, you need to install everything you want manually. Which I prefer, it gives me more control over my phone I find. Hydrogen works ok too, it just requires a bit of work to get play store going and remove all the bloatware. GSI camera worked fine from boot.
Dzol Cp said:
Thanks for your share! Awesome, I don't need/use NFC.
Click to expand...
Click to collapse
upload is at finished now
can a mod change the title to reflect that this will have the AB and A GSI not just A? Please and thank you.
Thanks! Any chance of an arm build?
Got no boot ......?!
Device's nubia z17 sd835
91egt said:
Thanks! Any chance of an arm build?
Click to expand...
Click to collapse
yea, it will be up in the morning. I did A and just about done AB for arm64, then will do A and AB arm
aljoscha81 said:
Got no boot ......?!
Device's nubia z17 sd835
Click to expand...
Click to collapse
how did you flash it? I didnt use trwp, I used fastboot from the pc
godkingofcanada said:
how did you flash it? I didnt use trwp, I used fastboot from the pc
Click to expand...
Click to collapse
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
aljoscha81 said:
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
Click to expand...
Click to collapse
It shouldn't. But its twrp. Weird things happen. Use fastboot. Its only 3 or 4 steps. The tutorial is on the google gsi website. I tried via twrp and had no issues however. It started to launch then rebooted, second boot it loaded OK
Cracked screen. But you can see the build info
godkingofcanada said:
Cracked screen. But you can see the build info
Click to expand...
Click to collapse
Ok.. will test out with fastboot thanks a lot!
aljoscha81 said:
Ok.. will test out with fastboot thanks a lot!
Click to expand...
Click to collapse
No problem
AB will be posted in about 2-3 hours. After that I will build A only Arm. It should be available by morning.
a/b please
irfaniphank2 said:
a/b please
Click to expand...
Click to collapse
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
godkingofcanada said:
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
Click to expand...
Click to collapse
:good::good::good::good::good::highfive::highfive::highfive:
AB arm64 legacy is now uploaded to the link in post one. Arm A and AB will show up over night. Starting with a in the morning. It takes about 4.5 to 5 hours to build
So we have official 9.0 update now, which means we have pie vendor installed our devices.
However, it seems non of GSI pie roms work on xz1 even though our vendor and kernel are working properly with pie firmware.
Is there anyone successfully installed 9.0 GSI rom after the official Pie update? Or is there any idea why they don't work?
Riskypedia said:
So we have official 9.0 update now, which means we have pie vendor installed our devices.
However, it seems non of GSI pie roms work on xz1 even though our vendor and kernel are working properly with pie firmware.
Is there anyone successfully installed 9.0 GSI rom after the official Pie update? Or is there any idea why they don't work?
Click to expand...
Click to collapse
everything is working fine on GSI 9.0 pie roms but if u need gcam, flash on aosp boot and vendor(because full camera2api and raw support), on stock blobs gcam doesnt work because there is no raw support on stock.
arslancn said:
everything is working fine on GSI 9.0 pie roms but if u need gcam, flash on aosp boot and vendor(because full camera2api and raw support), on stock blobs gcam doesnt work because there is no raw support on stock.
Click to expand...
Click to collapse
Thanks for your reply Can you suggest some roms that worked? Because whenever I try to boot my phone with this rom(https://forum.xda-developers.com/pr...opment-a-only-roms/ported-p-sgsi-pr2-t3845789), I get bootlooped
Riskypedia said:
Thanks for your reply Can you suggest some roms that worked? Because whenever I try to boot my phone with this rom(https://forum.xda-developers.com/pr...opment-a-only-roms/ported-p-sgsi-pr2-t3845789), I get bootlooped
Click to expand...
Click to collapse
try any updated ''GSI''(not sGSI) arm64 a only rom from here. sGSI roms have alot of bugs
arslancn said:
try any updated ''GSI''(not sGSI) arm64 a only rom from here. sGSI roms have alot of bugs
Click to expand...
Click to collapse
Thanks to your support, I've got finally found a working rom(Pixel Experienced Rom)! Maybe I think the roms I've tried are all sGSI roms that caused bootloops
Now I'm trying to use gcam now, so I've installed pie aosp vendor uploaded in sony open device project(fasboot flash oem ~~~.img). However, it seems it doesn't have problem with booting but gcam still crashes(I think it's cam2api problem). According to your previous comment, it seems I should flash aosp kernel which isn't provided by Sony. So should I manually compile the kernel to make it working?
Sorry for bothering :crying:
Riskypedia said:
Thanks to your support, I've got finally found a working rom(Pixel Experienced Rom)! Maybe I think the roms I've tried are all sGSI roms that caused bootloops
Now I'm trying to use gcam now, so I've installed pie aosp vendor uploaded in sony open device project(fasboot flash oem ~~~.img). However, it seems it doesn't have problem with booting but gcam still crashes(I think it's cam2api problem). According to your previous comment, it seems I should flash aosp kernel which isn't provided by Sony. So should I manually compile the kernel to make it working?
Sorry for bothering :crying:
Click to expand...
Click to collapse
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
arslancn said:
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
Click to expand...
Click to collapse
which version of gcam works?
arslancn said:
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
Click to expand...
Click to collapse
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Riskypedia said:
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Click to expand...
Click to collapse
:highfive: u can make a thread about flashing treble with full cameraapi 2 support and share your images with other XZ1 users!
Riskypedia said:
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Click to expand...
Click to collapse
did you have same bug on XZ1?
the battery level always in 20%.
arslancn said:
:highfive: u can make a thread about flashing treble with full cameraapi 2 support and share your images with other XZ1 users!
Click to expand...
Click to collapse
Sadly, it seems it's impossible to use AOSP based system because of its stability. It's way too unstable to use, but I think I can share the built images to make progress! Again, thanks for your help
gacky1601 said:
did you have same bug on XZ1?
the battery level always in 20%.
Click to expand...
Click to collapse
I've never experienced the bug when I used that. Did that happen to your XZ1? Or is it the problem of the other Xperia devices? The biggest problem was that it's too unstable that I can barely use that. The network oftenly disconnects and randomly reboots itself.
Riskypedia said:
I've never experienced the bug when I used that. Did that happen to your XZ1? Or is it the problem of the other Xperia devices? The biggest problem was that it's too unstable that I can barely use that. The network oftenly disconnects and randomly reboots itself.
Click to expand...
Click to collapse
Yes,my device is G8342. The wifi bug and battery level bug.
my device couldn't connect to any wifi,but sharing hotspot in 2.4ghz/5ghz was fine.
Screen colors look strange.
Randomly reboot,too.
I don't know any solution.
I only knew the methods to the image step by step from Sony's source.
Maybe we should build the kernel by ourselves
The problem you mentioned about disconnecting network, does it happens on wifi or mobile data?
Sorry, just a quick question has as resurrection remix has a treble room out, has anyone tried it?
gacky1601 said:
Yes,my device is G8342. The wifi bug and battery level bug.
my device couldn't connect to any wifi,but sharing hotspot in 2.4ghz/5ghz was fine.
Screen colors look strange.
Randomly reboot,too.
I don't know any solution.
I only knew how to build the image step by step from Sony's source.
Maybe we should build the kernel by ourselves[/QUOTE
Yeah, we should... I'm just a newbie developer, and really sad that we're lack of developers who can help XZ1 users, but I believe one day users make this out together. The dispaly color is because of AOSP's default display color temperature, maybe we can fix this out by touch some configs of kernel
Click to expand...
Click to collapse
lilbrat said:
Sorry, just a quick question has as resurrection remix has a treble room out, has anyone tried it?
Click to expand...
Click to collapse
I think you can just try it with stock boot , vendor and oem.
I will works perfectly.
Don't forget to report if there is any problem or it work properly.
---------- Post added at 04:37 PM ---------- Previous post was at 04:20 PM ----------
[/QUOTE
Yeah, we should... I'm just a newbie developer, and really sad that we're lack of developers who can help XZ1 users, but I believe one day users make this out together. The dispaly color is because of AOSP's default display color temperature, maybe we can fix this out by touch some configs of kernel [/QUOTE]
Yeah. I think there are a few developers work on XZ1.
Have .
The working perfectly rom will be our target, like the thread below.
https://forum.xda-developers.com/xperia-xz1-compact/how-to/xz1c-g8441-lilac-aosp8-1-t3762581
Share your all files so that i can work with gcam to be installed properly to latest pixel experience.