I am using my phone normally and all of sudden the sound of my phone is gone (no sound in speaker as well as in ear phone) and the dolby atmos mod is crashing so i decided to reflash the rom, gapps etc but after that facing the same issue to i decided to remove sound mod because i though may be this sound mod is creating this problem so i tried to reboot in recovery but within 2 to 3 second after selecting reboot in recovery my phone goes off..!!
now i tried to switch on my phone but nothing happens even i am not getting bootloader.. but when i connect the charger only white led link for once..
Guys please help...!! this is my primary phone
Sharad90 said:
I am using my phone normally and all of sudden the sound of my phone is gone (no sound in speaker as well as in ear phone) and the dolby atmos mod is crashing so i decided to reflash the rom, gapps etc but after that facing the same issue to i decided to remove sound mod because i though may be this sound mod is creating this problem so i tried to reboot in recovery but within 2 to 3 second after selecting reboot in recovery my phone goes off..!!
now i tried to switch on my phone but nothing happens even i am not getting bootloader.. but when i connect the charger only white led link for once..
Guys please help...!! this is my primary phone
Click to expand...
Click to collapse
Charge ur phone with PC. There might be chances that u go into that white background charging logo( this happens generally after 20-30 minutes of continuous charging).
Then unplug ur device from PC and try to reboot in system or bootloader. If u were lucky then u will boot in the same. And if not then repeat the process.
This happens with me also. I do the same and I receive my phone.
Hope this will also work for you else time to buy new phone.
Leave your phone in charge for 1 day and then turn on your phone next day. Hopefully it would get started. I too faced the same issue but this method worked for me.
Ankit_29 said:
Leave your phone in charge for 1 day and then turn on your phone next day. Hopefully it would get started. I too faced the same issue but this method worked for me.
Click to expand...
Click to collapse
bro r u able to open fastboot mode ?
Sharad90 said:
bro r u able to open fastboot mode ?
Click to expand...
Click to collapse
Yes I was able to go in recovery mode. The incident happen 2 years back, so I don't remember clearly. Previously I thought that my device had hard bricked but it was soft bricked. Just try to go in recovery mode if you can then kudos or else you have to sideload the rom.
Ankit_29 said:
Yes I was able to go in recovery mode. The incident happen 2 years back, so I don't remember clearly. Previously I thought that my device had hard bricked but it was soft bricked. Just try to go in recovery mode if you can then kudos or else you have to sideload the rom.
Click to expand...
Click to collapse
Oh..
but in my case i m not able to go to fastboot mode.. only led blinks when i connect charger
Sharad90 said:
Oh..
but in my case i m not able to go to fastboot mode.. only led blinks when i connect charger
Click to expand...
Click to collapse
Your decice is alive.
Just leave it for charge with different good charger(don't use stock charger). Leave it for 6 hours and then try. Hopefully it will get switched ON.
Ankit_29 said:
Your decice is alive.
Just leave it for charge with different good charger(don't use stock charger). Leave it for 6 hours and then try. Hopefully it will get switched ON.
Click to expand...
Click to collapse
thanks buddy i will try this procedure, hope this works
Sharad90 said:
thanks buddy i will try this procedure, hope this works
Click to expand...
Click to collapse
Did it work?
ayushg1214 said:
Did it work?
Click to expand...
Click to collapse
nope bro
Related
Hi, i would like to ask for some help with my Xperia U.
The issue is that i messed with the CWM recovery and i pressed on some wipe backup option i think, then i was wiping when i took the battery off.
now it wont boot.
Here are the issues.
1. Cannot enter Flashboot
2. Doesnt boot
3. no Vibration
4. Just RED LED when connected to PC or charger.
5. Not detected by PC Companion or by the PC itself
Please help me.
Follow the instructions from here http://forum.xda-developers.com/showthread.php?t=1849170
Sent from my Nexus 7
Blitzart said:
Hi, i would like to ask for some help with my Xperia U.
The issue is that i messed with the CWM recovery and i pressed on some wipe backup option i think, then i was wiping when i took the battery off.
now it wont boot.
Here are the issues.
1. Cannot enter Flashboot
2. Doesnt boot
3. no Vibration
4. Just RED LED when connected to PC or charger.
5. Not detected by PC Companion or by the PC itself
Please help me.
Click to expand...
Click to collapse
In Simple steps just pull out battery for 5 minutes then put it back and charge it through Charger not through PC USB. It will be charging and after 10 mins i guess it will boot. This ive faced two times and same procedure applies. Hope this works for u too:good:
GTARaja said:
In Simple steps just pull out battery for 5 minutes then put it back and charge it through Charger not through PC USB. It will be charging and after 10 mins i guess it will boot. This ive faced two times and same procedure applies. Hope this works for u too:good:
Click to expand...
Click to collapse
Won't work if he wiped system
Sent from my Nexus 7
thanks for the fast reply guys. ill give it a try,
i hope either of the two works
XperiaMT27 said:
Follow the instructions from here http://forum.xda-developers.com/showthread.php?t=1849170]
I can't enter flashboot mode.
Click to expand...
Click to collapse
Blitzart said:
XperiaMT27 said:
Follow the instructions from here http://forum.xda-developers.com/showthread.php?t=1849170]
I can't enter flashboot mode.
Click to expand...
Click to collapse
flash mode or fastboot mode??
u tried rubber band trick as mentioned in that thread??
Click to expand...
Click to collapse
XperiaMT27 said:
Blitzart said:
flash mode or fastboot mode??
u tried rubber band trick as mentioned in that thread??
Click to expand...
Click to collapse
okay i will try it thanks
Click to expand...
Click to collapse
it didnt work i tried it a couple of times already. can you please recommend another one/
Blitzart said:
it didnt work i tried it a couple of times already. can you please recommend another one/
Click to expand...
Click to collapse
All the different scenarios are discussed there, read them all
Sent from my Nexus 7
Blitzart said:
it didnt work i tried it a couple of times already. can you please recommend another one/
Click to expand...
Click to collapse
Are you sure the battery is charged?
It might seem a stupid question, but try to leave it half an hour plugged to the battery charger (just to be sure this isn't the issue).
charging it now
i just bought a universal charger so i can give it a try, ill update what happens
any update?
Blitzart said:
i just bought a universal charger so i can give it a try, ill update what happens
Click to expand...
Click to collapse
I am having the same problem like you, the difference is that I charged my battery using universal battery charger. could you telll a method that will be working to revive the device?
hi. my xperia u was unlock bootloader and root. when i entered a command in adb and want to flash a keiran-recovery-st25.elf the phone gone to off. and now it doesnt any pixel that shows to be alive !!!!! how i must to do? (( how to test is dead or not? sorry for my bad english
Try removing the battery -- then reinsert it and connect USB while holding down the volume button for fastboot or download
If you used fastboot correctly (fastboot flash boot whatever.elf) it can't have been the reason for causing a hard brick.
emperatour said:
hi. my xperia u was unlock bootloader and root. when i entered a command in adb and want to flash a keiran-recovery-st25.elf the phone gone to off. and now it doesnt any pixel that shows to be alive !!!!! how i must to do? (( how to test is dead or not? sorry for my bad english
Click to expand...
Click to collapse
How exactly have you tried to flash the kernel with adb?
i tried this command i think : " fastboot flash boot whatever.elf "
emperatour said:
i tried this command i think : " fastboot flash boot whatever.elf "
Click to expand...
Click to collapse
This should have worked, have you tried removing the battery as @Ryccardo said?
ChikeD said:
This should have worked, have you tried removing the battery as @Ryccardo said?
Click to expand...
Click to collapse
flash tools doesnt detect anything in this state. no led ilumination or anything happens
Go into boot loader mode and flash any Woking kernel example phantomkernel.!!
Sent from my Xperia P using XDA Premium 4 mobile app
I'm experiencing the same problem with that kernel. I flashed it because I wanted to get CWM recovery on top of my stock rom. Now my phone seems to be an expensive coaster with the exception of one red led when connected with USB.
Any solutions are very welcome...
H2Oxide said:
I'm experiencing the same problem with that kernel. I flashed it because I wanted to get CWM recovery on top of my stock rom. Now my phone seems to be an expensive coaster with the exception of one red led when connected with USB.
Any solutions are very welcome...
Click to expand...
Click to collapse
Does the red light become green after an hour charging ? ... if not , it looks like Sony service center is the only way
Ryu--X said:
Does the red light become green after an hour charging ? ... if not , it looks like Sony service center is the only way
Click to expand...
Click to collapse
No green light at all. With some help in another topic I found out I flashed a recovery image in boot...
Would it be worth sending the phone to a service centre? I got it for 40 pound from eBay....
H2Oxide said:
No green light at all. With some help in another topic I found out I flashed a recovery image in boot...
Would it be worth sending the phone to a service centre? I got it for 40 pound from eBay....
Click to expand...
Click to collapse
Then it's working now ?! if not , you could maybe sell it on Ebay for people who search for parts of the Xu
H2Oxide said:
No green light at all. With some help in another topic I found out I flashed a recovery image in boot...
Would it be worth sending the phone to a service centre? I got it for 40 pound from eBay....
Click to expand...
Click to collapse
1- charging in emergency mode (without kernel and/or chargemon running) is extremely slow, assuming it can even turn green it will probably take a day to get to 90%
2- no. installing a kernel can't have caused this problem by itself (of course, something -potentially including the kernel- might have screwed up parts of NAND important to the bootloader)... if it's the TA or other individual data good luck without a full backup, generic parts can be pulled from another phone but you need either a JTAG card specific to the model or to solder ~6 wires under the sticker to even try, good luck finding someone willing to do that for less than what you paid for the phone...
Ryu--X said:
Then it's working now ?! if not , you could maybe sell it on Ebay for people who search for parts of the Xu
Click to expand...
Click to collapse
Nope, it's still dead. Can't get into flash or fastboot mode so flashing a proper boot.img or kernel is just not working.
H2Oxide said:
Nope, it's still dead. Can't get into flash or fastboot mode so flashing a proper boot.img or kernel is just not working.
Click to expand...
Click to collapse
Hi can you try:
1. Disconnect the phone from PC.
2. Tale out battery and put it back.
3. Fire up flashtool on PC.
4.now hold vol - while connecting the phone to PC look what the flashtool log reads.
If its OK you can retry reflash the kernel and all.
Inviato dal mio Xperia U utilizzando Tapatalk
Your battery is most probably completely depleted. Try rubber band trick:
1) prepare stock ftf to be flashed in flashtool: that means that you go through all steps when you flash stock ftf until it says that you plug your phone in flash mode;
2) Now, take a rubber band and wrap it around the phone over vol down button and be sure that rubber band is pressing that button. Improvise if you have to.
3) Now that you have prepared both pc and phone, connect it to the PC via usb cable and just wait.
I suggest you do this overnight. Just do as I told and go to sleep. Hopefully, in the morning you will have a working device.
Idea behind this trick is to flash stock rom the moment the phone has enough juice for that action. By connecting, your phone will recharge at a very slow rate, but when it has enough charge it will light up, and there's your chance. By applying rubber band, phone will boot into flashmode the instant the device wakes up Very rarely, it may not have enough juice to finish the flashing process, but at least you will have kernel level chargning, which is way faster than the state in which your device is currently in.
Report if you manage to recover your device
Hi I have big Problem in my Evo that everytime i remove the battery and put again trying to recharge battery the red light of charging lighting for 3 sec then turned off and the phone doesn't work until i connect the phone with computer and using SDK MANAGER and right "adb reboot-bootloader" until get bootloader and click on something like restart bootloader that's happened after I rooted my phone. can you help me please
amr.h said:
Hi I have big Problem in my Evo that everytime i remove the battery and put again trying to recharge battery the red light of charging lighting for 3 sec then turned off and the phone doesn't work until i connect the phone with computer and using SDK MANAGER and right "adb reboot-bootloader" until get bootloader and click on something like restart bootloader that's happened after I rooted my phone. can you help me please
Click to expand...
Click to collapse
which recovery are you using?? i remember that classic clockworkmod recovery breaks charging while phone is turned off!
Snoob25 said:
which recovery are you using?? i remember that classic clockworkmod recovery breaks charging while phone is turned off!
Click to expand...
Click to collapse
Yeh I'm using Ckockworkmod you think the problem from it and what is the solution
Change recovery: go to www.4ext.net, choose free download, it's an apk, install it on phone (must be rooted) and follow instruction, it'll install 4ext recovery for you
thanks man
amr.h said:
thanks man
Click to expand...
Click to collapse
you're welcome, glad that you solved
Snoob25 said:
which recovery are you using?? i remember that classic clockworkmod recovery breaks charging while phone is turned off!
Click to expand...
Click to collapse
Snoob25 said:
you're welcome, glad that you solved
Click to expand...
Click to collapse
After I fixed the last problem i faced new one you can check this might you help me
http://forum.xda-developers.com/htc-evo-3d/help/help-stock-android-screen-t2983419
Hey there,
I installed CM13 on my OP2 a few days ago and it worked fine.
Today I accidentally restarted my phone into the fastbootmode and wanted to exit. So I kept holding the power button.
Well, it shutted down. But I can't start it anymore. If it's not charging nothing happens by holding the power button. If the charging cable is plugged in, it vibrates after a while like usual and then the OnePlus Symbol appears for about half a second and then the phone dies again.
Can you guys help me out getting my phone up again?
By the way: I'm completely new with rooting, flashing & xda, so please help me if I've done anything wrong :angel:
CptCrunchy said:
Hey there,
I installed CM13 on my OP2 a few days ago and it worked fine.
Today I accidentally restarted my phone into the fastbootmode and wanted to exit. So I kept holding the power button.
Well, it shutted down. But I can't start it anymore. If it's not charging nothing happens by holding the power button. If the charging cable is plugged in, it vibrates after a while like usual and then the OnePlus Symbol appears for about half a second and then the phone dies again.
Can you guys help me out getting my phone up again?
By the way: I'm completely new with rooting, flashing & xda, so please help me if I've done anything wrong :angel:
Click to expand...
Click to collapse
Did you rebooted to Fastboot mode just after flashing the ROM or you were already on CM13? it's not possible that you brick your device just by enter in fastboot mode something happend but i'm sure there is a solution
Chris-woods said:
Did you rebooted to Fastboot mode just after flashing the ROM or you were already on CM13?
Click to expand...
Click to collapse
No not after flashing, it already worked about a week without any problems...
Can you boot into recovery
Sent from my ONE A2003 using XDA-Developers mobile app
stevoswifty said:
Can you boot into recovery
Click to expand...
Click to collapse
Nope :/ Cannot do anything :/
CptCrunchy said:
Nope :/ Cannot do anything :/
Click to expand...
Click to collapse
Are you sure your phone is charging? Did you flash install a something that requiere root or that could modify your phone is your phone recognize by your computer if you connect it ?
Chris-woods said:
Are you sure your phone is charging?
Click to expand...
Click to collapse
Yes, have tried a second phone on that socket and on that cable
Chris-woods said:
Did you flash install a something that requiere root or that could modify your phone
Click to expand...
Click to collapse
I only rooted it for the installation of CyanogenMod. In the Developersettings, the root is deactivated.
Chris-woods said:
is your phone recognize by your computer if you connect it ?
Click to expand...
Click to collapse
Windows plays the connect sound, but it wont show up on any menue
CptCrunchy said:
Yes, have tried a second phone on that socket and on that cable
I only rooted it for the installation of CyanogenMod. In the Developersettings, the root is deactivated.
Windows plays the connect sound, but it wont show up on any menue
Click to expand...
Click to collapse
try to open command prompt and to type fastboot devices and show me a screenshot or tell me what it says btw were you H2OS Marshmallow or OOS 3.0 Marshmallow before installing CM13 ?
Chris-woods said:
try to open command prompt and to type fastboot devices and show me a screenshot or tell me what it says btw were you H2OS Marshmallow or OOS 3.0 Marshmallow before installing CM13 ?
Click to expand...
Click to collapse
The cmd says nothing. It skips a line and waits for a new input...
Before CM13 I was on OxygenOS 2.1.1 (not flashed)
CptCrunchy said:
The cmd says nothing. It skips a line and waits for a new input...
Before CM13 I was on OxygenOS 2.1.1 (not flashed)
Click to expand...
Click to collapse
Look at this http://forum.xda-developers.com/oneplus-2/general/assistance-solutions-tips-tricks-t3335469
Sounds like another case of stuck volume button, like other people that has had just this problem with stuck in fastboot.
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
kuhaku319 said:
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
Click to expand...
Click to collapse
If there is no other way you can always open the phone and charge the battery manually(if you have the equipment to do that). I had to do that to my phone yesterday(my battery was so low that it wouldn't boot).
BlAckXpeRia said:
If there is no other way you can always open the phone and charge the battery manually(if you have the equipment to do that). I had to do that to my phone yesterday(my battery was so low that it wouldn't boot).
Click to expand...
Click to collapse
how can i remove the case to get the battery out of the phone? its not removable right?
uh. no one?
kuhaku319 said:
how can i remove the case to get the battery out of the phone? its not removable right?
Click to expand...
Click to collapse
You have to use a hairdryer. There are tutorials on YouTube.
kuhaku319 said:
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
Click to expand...
Click to collapse
The phone should also be able to charge in recovery. Try that.
Btw. I recently flashed a Z2 via flashtool with an unplugged battery (usb power was enough), so you could also try flashing it now although it's empty.
Sent from Note 3, Xiaomi Redmi Note 3.
mr.loverlover said:
You have to use a hairdryer. There are tutorials on YouTube.
The phone should also be able to charge in recovery. Try that.
Btw. I recently flashed a Z2 via flashtool with an unplugged battery (usb power was enough), so you could also try flashing it now although it's empty.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
kuhaku319 said:
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
Click to expand...
Click to collapse
I would first try to flash just like it is now, without opening the back cover.
Opening the back panel is the last option I would consider, but only if everything else fails.
The thing with opening back cover is, that you will most likely damage you back panel, and you will have to order some new, fake raplecement + the phone won't be waterproof anymore.
And if you can get your phone into fastboot mode (and you've got unlocked bootloader) then just use "adb fastboot flash boot boot.img" command to flash some kernel with recovery.
Sent from Note 3, Xiaomi Redmi Note 3.
kuhaku319 said:
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
Click to expand...
Click to collapse
Have you tryied to plug it in and then press power and volume up continiusly until you fell three vibrations? i think this is for reseting the phone if you continue to press until another vibration it will shut down and maybe then it will charge. Also this thread had helped me before http://forum.xda-developers.com/showthread.php?t=1849170
NatNikos said:
Have you tryied to plug it in and then press power and volume up continiusly until you fell three vibrations? i think this is for reseting the phone if you continue to press until another vibration it will shut down and maybe then it will charge. Also this thread had helped me before http://forum.xda-developers.com/showthread.php?t=1849170
Click to expand...
Click to collapse
Thanks you for the reply
i tried the vol up + power only one time until it vibrates 3 times for the first time and its off, but when i plugged the charger its continues on bootloop cycles thus battery not filling up.
i guess im gonna try until another vibration and see what happen.
and thank you for the link, im gonna give it a try too later, im not home right now, cheers.
kuhaku319 said:
Thanks you for the reply
i tried the vol up + power only one time until it vibrates 3 times for the first time and its off, but when i plugged the charger its continues on bootloop cycles thus battery not filling up.
i guess im gonna try until another vibration and see what happen.
and thank you for the link, im gonna give it a try too later, im not home right now, cheers.
Click to expand...
Click to collapse
Maybe you should try it while plugged in also.
mr.loverlover said:
I would first try to flash just like it is now, without opening the back cover.
Opening the back panel is the last option I would consider, but only if everything else fails.
The thing with opening back cover is, that you will most likely damage you back panel, and you will have to order some new, fake raplecement + the phone won't be waterproof anymore.
And if you can get your phone into fastboot mode (and you've got unlocked bootloader) then just use "adb fastboot flash boot boot.img" command to flash some kernel with recovery.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
yeah i tried flashing it but the phone is totally dead, pc wont detect the phone because the phone is dead. that's the issue im facing now :silly:
NatNikos said:
Maybe you should try it while plugged in also.
Click to expand...
Click to collapse
tried, still bootlooped, when i hold power + vol up while plugged in, its powered on again and started bootlooping again
im just wondering. did u use flashtool to flash the ftf again?
Dilesh Perera said:
im just wondering. did u use flashtool to flash the ftf again?
Click to expand...
Click to collapse
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
kuhaku319 said:
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
Click to expand...
Click to collapse
ok try like this
1 put phone off ( u can press the little red button inside the left side flap till it vibrate 3 times )
2 disconnect the cable from Pc
3 open flashtool and select FLASHMODE select the ftf u going to flash
4 once the flashtool request to connect the phone connect the phone while keep on pressing the vol button
it should flash the ftf
kuhaku319 said:
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
Click to expand...
Click to collapse
It won't probably charge in fastboot/flashmode.
But it's very strange that the PC won't detect your phone when trying to enter flashmode.
Because, as I said earlier, I was able to get Z2 into flashmode without any power (battery taken out).
There should be some change in device manager when you connect the device.
Are you sure all the drivers are installed on your PC?
Dilesh Perera said:
ok try like this
1 put phone off ( u can press the little red button inside the left side flap till it vibrate 3 times )
2 disconnect the cable from Pc
3 open flashtool and select FLASHMODE select the ftf u going to flash
4 once the flashtool request to connect the phone connect the phone while keep on pressing the vol button
it should flash the ftf
Click to expand...
Click to collapse
mr.loverlover said:
It won't probably charge in fastboot/flashmode.
But it's very strange that the PC won't detect your phone when trying to enter flashmode.
Because, as I said earlier, I was able to get Z2 into flashmode without any power (battery taken out).
There should be some change in device manager when you connect the device.
Are you sure all the drivers are installed on your PC?
Click to expand...
Click to collapse
Solved
Apparently the driver is acting weird, but i uninstalled all z2 driver and reinstall them, all working and can be flashed
Thank you guys for helping me :fingers-crossed::highfive: