Hello. I have a little problem with my ascend.
I've been installed CM11 - CM 12 - works fine, then decide at CM13.. and its was mistake.
Now I have no system at G620s. All time, when try install new system - fail. - mean : Everythink in TWRP install fine, but when i restart my phone, nothing happen.
Everytime TWRP and Twrp. ( at some roms - cm 11 it stuck at logo Huawei).
What can I do now? I brick my phone, or it can be repair? What should i do now?
Tryed install custom rom - nothing. Cant flash stock recovery- its openin and closing in 2 sec.
Its any way to solve it? Have no backup files>.> Guess - everythink will be good, if succes install cm 11 and 12 -.-
In Interial storage its only TWRP folder , so theres no system >.>
Big thanks!
Related
Hi i kind of bricked my Mediapad 7 when tring to update Cyangen 10.2 to Cyangen 11. Need some help how to proceed.
First i booted into TWRP and tried to install the file
S7-301u V100R002C232B005 ICS Android 4.0.3 General Version.zip
to go back from Cyano 10.2 to stock rom 4.0.3. But this failed.
So i directly installed
cm-11-20140118-UNOFFICIAL-hws7300u.zip
Installation went OK. No, i didn't do a backup of the installed 10.2.
After reboot, the device is not booting but always going back to TWRP. What can i do?
What i tried in TWRP so far:
Reinstalling cm-11-20140118-UNOFFICIAL-hws7300u.zip
Reinstalling cm-10.1-20130526-UNOFFICIAL-hws7300u.zip
Wipe Cache
Factory Reset
Nothing helps. Always booting into TWRP v2.3.2.3 :crying:
Thanx for any help how to resolve this!
Forgot: During install of firmware there is a log-line:
E. Unknown File System: 'datamedia'
no slash between data and media
Solved
Solved it.
- Went back to stock recovery with "Auto_recovery_installer_for_huawei_mediapad"
- installed 4.0.3
- then installes cyanogen 11 with twrp
pillepalle555 said:
Solved it.
- Went back to stock recovery with "Auto_recovery_installer_for_huawei_mediapad"
- installed 4.0.3
- then installes cyanogen 11 with twrp
Click to expand...
Click to collapse
I had the problem of not being able to reinstall a stock rom as well.
How EXACTLY did you do it for the stock one?
I've also found out from a CM developer that stock roms can't be installed with the custom recoveries like TWRP or CWM.
Which is a nice thing to know since there doesn't seem to be any info on the forums about that.
Hi everyone,
Im writing because I got in a bit of a trouble installing custom ROMs. I have installed 3 different ROMs, I wanted to try them for myself, and after that my phone does not work. I have researched and I am asking for help because I do not know what caused the error.
What I did:
Install clockworkmod as recovery tool in phone and Cynamongenmod following this tutorial http://wiki.cyanogenmod.org/w/Install_CM_for_i9305. ----> Everything works fine except the camera (it is a known issue)
Install paranoid android to see if the camera bug what fixed, (it wasn't) ----> Everything works fine except the camera
Install pacman (pac_i9305-release-20141231.zip) , but i didnt install gapps ----> Everything works fine, even the camera!!
Try to install gapps for the version 4.4.4 to my understand (pa_gapps-stock-4.4.4-20150208-signed.zip). -----> Clockwork recovery tool says that can not install. Researched about it and flashed Team Win Recovery Project v2.3.3.0
Installed gapps with TWRP -----> Booted pacman but get stuck on error like "can not execute gapps"
Got a bit frightened and installed Clockwork revovery tool and Cyanmongenmod again----> The phone boots but NO PHONE SERVICE WORKING!!, I got in panic
Used the recovery image -----> The phone boots (even the phone service) but I get a error on gapps "gapps stoped"
Installed TWRP again and try to install Pacman rom and give me the errors:
Making sysmlinks....
set_metadata_recursive: some changes failed
E: error in /data/media/0/sideload.zip (status7)
Reserached a bit and found: http://www.xda-developers.com/how-to-fix-a-broken-rom-flash-in-certain-kitkat-roms/
Im confused and now I just dont know what can I do to get my phone back to normal, I dont mind it is with the factory version [:'( ] or with a custom rom that works fine [=)]. Thanks in advance to everyone
Thanks for your help in advance =)
[Q] Pre Rooted -> Dual Recovery->Ta Back Up->Unlocked Bootloader->=no Recovery?
Heello
I made a pre root with this method http://forum.xda-developers.com/xperia-z2/development/stock-d6502-23-1-0-726-complete-guide-t3085893
everything worked fine.
Downloaded CM 12.1 wanted to open Recovery but it is not possible tried rom manager etc. to open recovery but not possible.
Wanted to do flash with boot.img via fastboot but it cant load the boot Image (fastboot mode possible).
What am I doing wrong ?
Thank you in advance
Hello again
I was possible to flash Cm 12.1 and Gapps after I did everything till step 19 but then I have choosen the Cm 12. 1 and Gapps.
Cwrm asked me to fix root and I clicked yes.
Cm 12.1 opened sucessfuly , I activatet root with developer options, downloaded update, then restarted and installed and it seems like everything works for now.
2 days to root a phone , great job
Recovery works but gapps doesnt istall properly no error but play store doesnt open....
Hi all,
I have a problem with my phone and I have no idea what to do now.
I am quite new to rooting, I am sorry if I say something stupid.
But anyway, I was having some fun with my working huawei untill I found out about root.
I went to my laptop and rooted my phone, installed superSU and installed this custom recovery twrp thingy.
Everything worked great untill I chose to install a custom rom (LineageOS 14.1).
Me being stupid without making a backup going to this twrp and wiping everything (wipe > advanced wipe > select everything) and after this install lineage OS from my sd card.
Which failed (dont know why) but I went on google and tried every single thing which didnt work for me.
So now I am stuck with a phone (huawei p9 lite vns-l31 dual sim) without a OS installed and I have no idea what to do.
Can anyone help me with installing my stock rom or a custom rom or any rom which works so I can at least use my phone?
I dont care what kind of rom (ofcourse I prefer Lineage Os) but any rom is ok, I just want and need to use my phone.
Extra information :
No I didnt remove fingerprint (red this on internet)
I had emui 5 (android 7)
Erecovery does not factory reset my device.
Hisuite does not reset my device too.
I dont have any software or roms or firmware (except fastboot/adb)
I can acces Fastboot and Twrp (v3.1.1-0) on my phone.
It just does not boot....
Though I learned that I from now on always make a backup.
Thank you in advance.
Does somebody have any idea what I have to do now?
Phone is still not working....
Hey gentlemen,
so the case is. I was on Epic Rom (MIUI 10) and installed Cardinal-AOSP yesterday. I personally didnt liked it.
- Now i cant install Miui 9, 9.5 or 10 only Android 8 based system.
- Even tried installing one of my backups, but no luck here.
- Tried Masik, restart after 30-60 seconds of loading again.
- Flashed lazy-flasher also
My device has TWRP Exclusive 3.2.1-(5/7). What can cause the problems? Hope you can help me out with a solution.
Update: Managed to get Epic rom 8.7.6 almost working, now it says my data is encrypted and i have to reset the phone, and than boots into twrp.
maybe, just maybe ok? you have treble version of oreo rom. and you have to un-treble to use non-treble rom. just try it maybe can help you
Get this rom: https://sourceforge.net/projects/orangefox/files/mido/ (credits to this site:https://forum.xda-developers.com/re.../recovery-orangefox-recovery-project-t3775933) Download the R7 zip flash it and try again.
OKAY, after a day I got út Sáta was corrupted, and was in f2fs state. Had to change it to exFAT4 and then I could install EpicEom by Escobar, wiped everything then installed again. Works like a charm.
All done on TWRP-Exclusive.