This Rom is created by Abbu Qaffar...I am posting on his behalf...
#Disclaimer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards , ...
Please do some research if you have any concerns about Custom Build Roms before flashing it!
Supported devices
Galaxy J7 Prime SM-G610F
FEATURES
1. based on stock G610FDDU1APK1 firmware
2. Deodexed
3. Pre-Rooted
4. Busybox Included
INSTRUCTIONS
1. Boot to TWRP
2. Perform A full Wipe Including System,DATA,CACHE,etc.
3. Flash This Rom and Reboot
DownloadsROM LINK
Credits
Samsung
Abbu Qaffar {Creator}
Thanks varun it's me ??
any chance to make a deodexed rom for G610M?
Please update deodex acq4
please update base AQC4, thank you!
Yes I have done updates deodex with a version of AQC4 I mixed with of the kernel long that doesn’t happen bugs in brightnes..
Up please sir update aqc4 thnks
Varun hellboy said:
This Rom is created by Abbu Qaffar...I am posting on his behalf...
#Disclaimer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards , ...
Please do some research if you have any concerns about Custom Build Roms before flashing it!
Supported devices
Galaxy J7 Prime SM-G610F
FEATURES
1. based on stock G610FDDU1APK1 firmware
2. Deodexed
3. Pre-Rooted
4. Busybox Included
INSTRUCTIONS
1. Boot to TWRP
2. Perform A full Wipe Including System,DATA,CACHE,etc.
3. Flash This Rom and Reboot
DownloadsROM LINK
Credits
Samsung
Abbu Qaffar {Creator}
Click to expand...
Click to collapse
I request you to post your thread here :- Link
https://forum.xda-developers.com/t/galaxy-j7-prime
:good::good:
Related
I am not responsible for any damages for your device , by flashing this rom you will accept all the damages...
Click to expand...
Click to collapse
Downloads : http://www.mediafire.com/download/eknen45ixclcibv/CM11_v1_1.zip
As roms for recovery to do the three wipe. The roms before posting are tested in the Xiaomi Note
How to flash:
* First have TWRP or CWM installed (TWRP recommended).
* Take nadroid backup
* Flash above rom, and optionally gapps.
*wipe cache and dalvik
* Reboot and enjoy
Any one who could make an installation video will be saluted....
plz report bugs
Device tree and vendor files will be provided soon
cm 11 initial build will be provided.... soon
sai dev said:
Regular builds for this mod will be provided to you ...
As roms for recovery to do the three wipe. The roms before posting are tested in the Xiaomi Note
How to flash:
* First have TWRP or CWM installed (TWRP recommended).
* Take nadroid backup
* Flash above rom, and optionally gapps.
*wipe cache and dalvik
* Reboot and enjoy
Any one who could make an installation video will be saluted....
Click to expand...
Click to collapse
Just a heads up guys "As stated in OP Regular builds wont be provided. This rom is made by some chinese guy
Stock android 4.4? or based off 4.2?
Mrbababo said:
Stock android 4.4? or based off 4.2?
Click to expand...
Click to collapse
4.2 of course since no kernel source of redmi note has been released, yet!
This rom is CM 10 based on 4.2.2 , Not CM11 But everything is working smooth and fine
Thanks for putting the link, but as its based on CM10, can someone please post Screenshots and Details, before people start flashing it.
I would like to Have CM 11 on my Redmi Note, but can live with CM10 too, but without more details, I would be little hesitant to flash it.
MIUI Forums state, Redmi 1S will have its kernel source by December End, so we can hope Kernel source for Redmi Note should also come bundled as only specific Q1-2015 date for kernel source is mentioned about Mi-3.
Thread closed.
No kernel Source code.
*Proceed at your own risk.
*I'm not responsible for bricked devices, dead sd cards.
Click to expand...
Click to collapse
I successfully ported MIUI to my device Innjoo i1 (Only available in the Middle East & Africa) and I loved to share it with anyone interested.
-Features:
*100% Pure fully functional MIUI.
*Everything working and tested : RIL,Camera,WIFI,Bluetooth,sensors,Sound.USB,and anything you can think of.
*Very smooth.No lag.
-Changelog:
--1.0
.initial release.
-Bugs:
1-Ram is read 1GB in "about phone"..it's not really a bug..it doesn't cause any problems.
2-You tell me.
Screenshots:
.You can find a whole lot of them here.
-Instructions:
1-Root your device. (Recommended:Kingo Root)
2-Install CWM Recovery (Using this guide. thanks to @oscarblue48)
3-Backup your current ROM using CWM and MTKDroidtools.
4-Download the ROM.
5-Extract the first .zip and you will get the ROM flashable zip (I did this to reduce the size of the upload..my internet is ****.)
6-Copy the extracted .zip file to your SD card.
7-Turn Off your device.
8-Boot to CWM using Volume up + power button combo.
9-Wipe Cache,Data,Dalvik Cache,and System.
10-Select "Install zip from SD card" select the ROM .zip, have a cup of coffee or whatever and wait for it to finish.
11-Reboot and enjoy.
-Download:
v1.0
-Credits:
-Xiaomi : For creating MIUI in the first place.
-@arnabgharay : For his MIUI for Gionee M2 rom that I used as a base.
Please report any bugs you find..Request any modifications you'd like.
Enjoy.
XDA:DevDB Information
[ROM] [iMIUIv5] [Innjoo i1] [MT6582], ROM for the Android General
Contributors
SAM209, Xiaomi - arnabgharay
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: MIUI
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-12-29
Created 2014-12-30
Last Updated 2014-12-29
Thanks for the Gr8 job Sam.
Can you link this discussion with the InnJoo forum so that all users of i1 can easily locate and use this ROM
Are both sim working on this ROM with 3G?
mohammad.nomaan said:
Thanks for the Gr8 job Sam.
Can you link this discussion with the InnJoo forum so that all users of i1 can easily locate and use this ROM
Are both sim working on this ROM with 3G?
Click to expand...
Click to collapse
Yes both working fine..
I'll post it to the innjoo forum now.
How Do i Port This To Innjoo Note Its Have Same Chipset Innjoo Note is MTK6582 too??
hello ,
why when im trying to install this rom i get : installation aborted !! plz help
ammmma2 said:
hello ,
why when im trying to install this rom i get : installation aborted !! plz help
Click to expand...
Click to collapse
I know my reply may be too late , but I just faced this problem today in an old mobile , Just unzip the zip file bro ( one is inside the other )
MICROMAX CANVAS NITRO A311 STOCK ROM
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/[/CODE]
Instructions:.
Go to recovery mode
select Wipe
wipe dalvik cache
wipe system
wipe data
then go back to main menu
select install
select use external sd card
select rom
and reboot
and ENJOY
Download link
uploading
NOTE:
I have used aroma installer from Hive UI team's installer therefore it will ask you to install a few apps
do not install them just simply install the rom
also in the end it may say that setting perm failed
but do not worry that has no effects on rom or installation
XDA:DevDB Information
MICROMAX CANVAS NITRO A311 STOCK ROM, ROM for the Micromax Canvas Nitro A310/A311
Contributors
yogesh.kalyana
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2015-08-31
Last Updated 2015-08-30
Reserved
Reserved
yogesh.kalyana said:
MICROMAX CANVAS NITRO A311 STOCK ROM
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/[/CODE]
Instructions:.
Go to recovery mode
select Wipe
wipe dalvik cache
wipe system
wipe data
then go back to main menu
select install
select use external sd card
select rom
and reboot
and ENJOY
Download link
uploading
NOTE:
I have used aroma installer from Hive UI team's installer therefore it will ask you to install a few apps
do not install them just simply install the rom
also in the end it may say that setting perm failed
but do not worry that has no effects on rom or installation
XDA:DevDB Information
MICROMAX CANVAS NITRO A311 STOCK ROM, ROM for the Micromax Canvas Nitro A310/A311
Contributors
yogesh.kalyana
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2015-08-31
Last Updated 2015-08-30
Click to expand...
Click to collapse
Why bother making a thread when you can't upload the ROM? Useless
Reported.
Thread closed
Placeholders are not allowed
Please do not make threads until you have a download link ready
Thanks
Note I AM NOT RESPONSIBLE FOR ANY DAMAGE IN YOUR DEVICE SO DO YOUR OWN RISK
Linage os unofficial ROM for galaxy star pro
Reboot to custom recovery
Then wipe every thing
And install linage os unofficial rom
Link
https://yadi.sk/d/aw4G5jAr3Eo6th
Bugs? Screenshots?
???
Lollipop UI4 edited rom..... Flavoured one......yum yum
Hi friends I am new to XDA thread,,, but I will like to inform that SGSP SAMSUNG GALAXY STAR PRO is back with new rom named lollipop :silly: :victory:
So here are few things you need to follow to install this rom
1. Reboot into recovery twrp/cwm
2.Take a backup....incase if u mishap while installation
3.wipe dalvik/cache/system/data/ partitions only!!!!!
4. Click on install and go to directory where the rom is placed..
5.install it and first boot will take 10-15mins max.....:laugh:
6.iam not responsible for bricked phones.... Do wid yr own risk..
7.enjoy....and dont feel nag to thank me....
Link:- as i am new here i will post link later....
Enjoy yr phone
Hi
Link dead, can anyone re-upload?
WARNING!
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
How to install TWRP
---Requirements---
Computer
lg g2 mini
micro usb cable
brain
---Requirements---
1. ROOT your device [Method is in ROOT category]
2. Unlock your bootloader [Method is in bootloader unlock category]
3. flash recovery using Rashr [Download Rashr]
4. after flashing recovery click reboot to recovery
5. DONE
RECOVERIES
TWRP 3.0.1, 3.0.2 - (orginal thread) (download)
TWRP 3.1.1 - (orginal thread) (download)
Firmwares
D620r lolipop 20b - (download)
D620r kitkat 10g - (download)
D618 kitkat 10a - (download)
D620 lolipop 20d - (download)
ROOT
Kingoroot - Works on kitkat and lolipop
Towelroot - tested on d618
ROMS
[ROM][6.0.1_r78][FINAL] Resurrection Remix - THREAD - DOWNLOAD - MIRROR[ROM]crDroidAndroid [v3.8.5] [nougat7.1.2] 20180208 - THREAD - DOWNLOAD (Decrypt Key is in thread)[ROM] [ALPHA] [8.1] [Unofficial] LineageOS 15.1 - THREAD - DOWNLOAD
Resurrection Remix 5.8.5 (Android 7.1.2) - THREAD - DOWNLOAD
[OFFICIAL] [Android 7.1] Resurrection Remix v5.8.0 - THREAD - DOWNLOAD
CyanogenMod 14.1[ALPHA] - THREAD - DOWNLOAD
[ROM][5.0.2] DroidMaster (final version 20161211) - THREAD - DOWNLOAD[ROM][5.1.1][D620r] Modified CM 12.1 - THREAD - DOWNLOAD
Unlocking bootloader
Replacing aboot.bin lolipop All Models - THREAD
Replacing aboot.bin kitkat ONLY D620R - THREAD
Kernels
-v- Kernel X - thread
Flashtools
LG FLASH TOOL 2014 - DOWNLOAD
LGUP - DOWNLOAD
Added -V- Kernel X
Added new root method
i have both stock roms of LG G2 Mini what i need to do to flash without any error
LG UP said unknown model sometimes and other flash tools says error to the server and sometimes stuck.
P.S. if i post in a wrong topic you can move it anyways
AlinTecsan said:
i have both stock roms of LG G2 Mini what i need to do to flash without any error
LG UP said unknown model sometimes and other flash tools says error to the server and sometimes stuck.
P.S. if i post in a wrong topic you can move it anyways
Click to expand...
Click to collapse
I never know how to fix it... Did you installed drivers?
Zordon.xyz said:
I never know how to fix it... Did you installed drivers?
Click to expand...
Click to collapse
drivers LG are installed they detected as LGE Modem Serial COM Port
THX bro you saved my ass
Lisu_81 said:
THX bro you saved my ass
Click to expand...
Click to collapse
No problem bro