when i press an "up" button.. it functions as a down button ..
and a down button as an up button..
and power button is not working..
ive been trying to get into a download mode
but when I do a "press up and downbutton +plug usb + plug a battery" trick to get into the download mode
the recovery mode screen automatically appears...
so stressed now..
I would be greatly appreciated if anyone can help me out
All of this and more can be found in the Noob Guide in the general section op by S15274N
You are in recovery mode if it says "2E" or "3E" recovery you should be able to get into download mode and then you can flash back into stock.
To get to download mode plug in you usb into the computer first. then, hold the volume keys both down then plug into the phone (while it is showing the recovery mode, in other words it is still on) if it does not work, then pull out then try again a couple of times When you plug it in leave for 2-3 secs. There are other methods in the noob guide to try as well. If this does not work or you can't get it Then, just buy a Jig from the xda member connextion2005 (mobilevideotech.com I think). they are 8 bucks and all you do in just plug it in and it will bring up the download mode. From there you can do this:
Get the Odin program 1.7 or newer, get the Stock 2.1 Tar file, get the 512pit file
You can find these in the general forum in the thread called Noob guide
then:
Open Odin, plug in your phone, put into download mode. connect it to the computer it will recognize might say com8 or some other number
Load the PIT file into the appropriate area and the .tar in the PDA area.
You want to check the 're-partition' box.
Now click start, let it finish, and this time your phone will load up just fine!
Then, root the phone and you can flash your new Rom.
Use the super oneclick method it is easier to root then download Rom manager and now you can flash any rom you want
This is solvable good luck
nemesis0224 said:
when i press an "up" button.. it functions as a down button ..
and a down button as an up button..
and power button is not working..
ive been trying to get into a download mode
but when I do a "press up and downbutton +plug usb + plug a battery" trick to get into the download mode
the recovery mode screen automatically appears...
so stressed now..
I would be greatly appreciated if anyone can help me out
Click to expand...
Click to collapse
Lets do this one
dont take the battery out
just press down vol and up vol without power and plug the usb
tell me if it worked
NO,, It didn't work..
the problem is that the recovery mode appears instead as soon as i plug the usb..
even if i tried the old method I've been using for..(this one used to always work but not anymore..)
1. Remove SD and SIM card
2. Remove battery
3. plug the phone into USB
4. hold down vol-up and vol-down
5. Pop the battery back in while holding vol buttons
This may work if not.............
Just get the jig it works and will solve this problem
I am trying to flash stockrom 407 on my dell streak then recovery install update and restart the phone and boot screen says failed write than it power off and its not powering up now what to do
tried Qdl tools but my laptop also not detecting phone
plz help guyz.........
little help
dude, did you make sure you were holding the (closest to the earphone jack) volume UP button when you were plugging the cable into the streak?
Whether he held the volume up button isn't relevant. This Streak is dead, which makes me wonder if, in installing the new recovery, he sent a -w or -erase command through fastboot before attempting to reboot.
I got a XT912 with a screen that stays black(don't know why, it looks fine). What i am trying to do, is to get into the fastboot mode without seeing anything so i can flash a stock rom via pc. Whatever combinations i try i only get it to reboot(it keeps saying "droooiiiidd"). I googled alot and i can't find a solution for this.
The reason why i want to flash a new rom is because i want to try if i can fix this screen issue and because the screen is locked and i can't get past that and use the phone(via otg and hdmi out).
How do i shut the phone down only using the keys(without restarting) and how do i start from a powered down mode into fastboot(step by step guide would be helpful).
Ensure phone is completely powered off (also, fully charged). Vol down + Power (vol down first). Release power button after 3-5 seconds, and then release vol down. You are now in fastboot. Connect usb, and your computer should identify the phone.
LuckiestNut419 said:
Ensure phone is completely powered off (also, fully charged). Vol down + Power (vol down first). Release power button after 3-5 seconds, and then release vol down. You are now in fastboot. Connect usb, and your computer should identify the phone.
Click to expand...
Click to collapse
What about selecting fastboot first? Isn't there some kind of menu i get into after doing that(at least i know there should be one)? Where i have to scroll down and select fastboot.
Holding vol up and vol down will bring you to the boot menu. Vol down is directly to fastboot mode.
Sent from my XT912
LuckiestNut419 said:
Holding vol up and vol down will bring you to the boot menu. Vol down is directly to fastboot mode.
Sent from my XT912
Click to expand...
Click to collapse
Can i somehow shut it down with the keys? I don't know why, but whatever i try it keeps rebooting only.
Press and hold both vol buttons and the power button for six to ten seconds. Then release all three. That is a manual reboot. A working screen will briefly flash. If you try to boot to the main boot menu, with vol +/-, and power, AP Fastboot is the third option. Press vol down twice to highlight ap fastboot, vol up once to select it. This also takes you to AP Fastboot mode, as opposed to the vol down and power, which is direct.
Sent from my XT912
LuckiestNut419 said:
Press and hold both vol buttons and the power button for six to ten seconds. Then release all three. That is a manual reboot. A working screen will briefly flash. If you try to boot to the main boot menu, with vol +/-, and power, AP Fastboot is the third option. Press vol down twice to highlight ap fastboot, vol up once to select it. This also takes you to AP Fastboot mode, as opposed to the vol down and power, which is direct.
Sent from my XT912
Click to expand...
Click to collapse
Thats what i tried just now, i pressed vol+/- and power to reboot. Soon after i pressed again vol+/- and power and waited for like 10 sec, then i pressed vol - 3 times and then vol + and all he did was reboot again damn. Is my timing wrong? 3 times down is wrong i guess if i start from position 1. Just as a reminder i can't see anything.
Volume down twice to highlight AP fastboot, up once to select. Also, you want the phone to be completely off to boot into fastboot mode. There is no way to REboot into the boot menu
Sent from my XT912
LuckiestNut419 said:
Volume down twice to highlight AP fastboot, up once to select. Also, you want the phone to be completely off to boot into fastboot mode. There is no way to REboot into the boot menu
Sent from my XT912
Click to expand...
Click to collapse
What i did now is open the back, disconnect the battery and connect it again, use vol down button + power button for ten sec and then plug it into the computer. Nothing happens, atleast not on the computer, the phone shows a white light in the top left corner. It stays on even if i disconnect the cable.
Holding for that long can cause a reboot. Try holding the vol down and power for like... three seconds, after reconnecting the battery. Also, are you using an OEM motorola cable? And, have you ever used RSDlite? Have you prepared for flashing with the appropriate fastboot sbf files? Once the computer recognizes the phone, you'll want to have the motorola drivers installed, RSDlite ready, and the right sbf file ready.\
EDIT
Even if you do access the fastboot menu, if the phone believes the battery is too low, it will not allow the pc and phone to connect. The screen should say:
AP Fastboot Flash Mode (S)
0A.77
eMMC Info: Size 16G
To return to normal mode- first press power key to power down
Device is LOCKED. Status code: 0
Battery OK
OK to Program
Connect USB
Data Cable
I realize that your screen isn't displaying anything, but this menu is what will restrict you from flashing if the battery is low. Instead of Battery OK, it will say Low Battery
LuckiestNut419 said:
Holding for that long can cause a reboot. Try holding the vol down and power for like... three seconds, after reconnecting the battery. Also, are you using an OEM motorola cable? And, have you ever used RSDlite? Have you prepared for flashing with the appropriate fastboot sbf files? Once the computer recognizes the phone, you'll want to have the motorola drivers installed, RSDlite ready, and the right sbf file ready.\
EDIT
Even if you do access the fastboot menu, if the phone believes the battery is too low, it will not allow the pc and phone to connect. The screen should say:
AP Fastboot Flash Mode (S)
0A.77
eMMC Info: Size 16G
To return to normal mode- first press power key to power down
Device is LOCKED. Status code: 0
Battery OK
OK to Program
Connect USB
Data Cable
I realize that your screen isn't displaying anything, but this menu is what will restrict you from flashing if the battery is low. Instead of Battery OK, it will say Low Battery
Click to expand...
Click to collapse
I know how to use rsdlite, because i flashed my xt910 with it. The battery could be a problem. I have it fully charged and will try it again now, but if that doesn't work i propably need a factory cable. I think i made it into the fastboot mode in previous tries but got stuck because of the battery status.
Edit: Reconnecting the battery and getting into fastboot mode seems to work, but connecting the cable gives me the white light and nothing else works.
So your computer is still not recognizing the phone, even when it seems to be in fastboot?
Sent from my XT912
LuckiestNut419 said:
So your computer is still not recognizing the phone, even when it seems to be in fastboot?
Sent from my XT912
Click to expand...
Click to collapse
Yep, no reaction from the os and nothing listed in adb devices or fastboot devices.
Assuming the battery power is adequate, the next and only solution is the proper data cable (OEM).
If the battery is low, you'll need to either use a TBH factory data cable, or the workaround of hard wiring a stripped usb cable screwed to the battery terminals on the phone. Once the phone identifies a good power source, it will allow a pc connection.
Sent from my XT912
EDIT
BP SBF Flash is the fourth option down, out of seven total, I believe. If you can boot to the main boot menu, and click vol down 3 times, you'll select this option. As I recall, I was able to confirm my phone, usb cable, and pc were all communicating. My *pc identified an unknown device being connected, even with a nearly dead battery. Then I knew I just needed a power supply. I'm not sure what this option is for, but it told me what I needed to know.
LuckiestNut419 said:
Assuming the battery power is adequate, the next and only solution is the proper data cable (OEM).
If the battery is low, you'll need to either use a TBH factory data cable, or the workaround of hard wiring a stripped usb cable screwed to the battery terminals on the phone. Once the phone identifies a good power source, it will allow a pc connection.
Sent from my XT912
EDIT
BP SBF Flash is the fourth option down, out of seven total, I believe. If you can boot to the main boot menu, and click vol down 3 times, you'll select this option. As I recall, I was able to confirm my phone, usb cable, and pc were all communicating. My phone identified an unknown device being connected, even with a nearly dead battery. Then I knew I just needed a power supply. I'm not sure what this option is for, but it told me what I needed to know.
Click to expand...
Click to collapse
Ok i will try that until i get one of these cables or adapters.
Is it possible to use adb via recovery or do i need a custom recovery for that? I am not sure if i need to unlock the bootloader via motorola( have to use fastboot for unlock), that would as far as i know reset the stock rom(if i need a custom rom).
Hello friends!!
I have a little problem, i was trying to root my Razr but i couldn, by the way the process brick the boot so now when i press the power button, appears a black screen and said:
AP FastBoot Flash Mode (S) (Flash Failure)
0A.77
eMMc.info size 16g
To return to normal mode-first press power key to power dwn.
Device is LOCKED. Status Code:0
Battery OK
OK to program
Transfer Mode
USB Conected
i can make the phone boot if i press vol +, vol -, and power and i choose normal boot, then start, but if i turn off the cellphone and only push power button always shows the black screen with the message.
when i tried to flash it with RSD Lite always get an error. i live the picture to see if some one can help me!!
Don Mike said:
Hello friends!!
I have a little problem, i was trying to root my Razr but i couldn, by the way the process brick the boot so now when i press the power button, appears a black screen and said:
AP FastBoot Flash Mode (S) (Flash Failure)
0A.77
eMMc.info size 16g
To return to normal mode-first press power key to power dwn.
Device is LOCKED. Status Code:0
Battery OK
OK to program
Transfer Mode
USB Conected
i can make the phone boot if i press vol +, vol -, and power and i choose normal boot, then start, but if i turn off the cellphone and only push power button always shows the black screen with the message.
when i tried to flash it with RSD Lite always get an error. i live the picture to see if some one can help me!!
Click to expand...
Click to collapse
Have you tried the Droid Razr Utility?
No friend!! Do you have the link to download it? its not the same as XT912 true?
I think I saw a similar thread before, and the problem with RSD were the drivers; however I'm not sure about it. Try to dig a bit in these forums, I'm sure you'll find the answer.
Edit, these might help:
http://forum.xda-developers.com/showthread.php?t=1796712
http://forum.xda-developers.com/showthread.php?t=1815242
http://forum.xda-developers.com/showthread.php?t=1634223&page=2
Im new here, earning my 10 comments atm thanks
Hi my brothers;
my phone huawei p20 lite hard brick
1. no open
2. does not see pc
3. no recovery
4. no bootloader
5. fully dead
HELP PLS
from everyone sory my bad english
Can you shut it down? ( Turn it off)
To unbrick the easiest way is to boot into bootloader (Unplug USB, Hold Volume Down and plug USB cable).
Then you flash a stock system and a stock recovery.
mchtt said:
Can you shut it down? ( Turn it off)
To unbrick the easiest way is to boot into bootloader (Unplug USB, Hold Volume Down and plug USB cable).
Then you flash a stock system and a stock recovery.
Click to expand...
Click to collapse
? no bootloader and recovery
How did you remove the bootloader?
try this first :
1. make sure your phone turned off completely.
2. press and hold Volume Down button, and plug usb to your phone and to pc.
3. let it like that for 30 minutes.
please response back to me if your phone get into fastboot mode.