Hi guys, this is the a full Odin tar files for offical Nougat. Person outside the US can Flash and use it.
Unzip this package and get five file, flash it by Odin.
PS: It is better to flash the pit files. Don't worry, your Network unlocked status will remain same after updates.
mega: https://mega.nz/#!ZQg0FCoY
By the way, Nougat on S7Active is too slow，I found S7's package in waiting it LoL....
The decription key is: !WHLOkv-PVKMzWhe4ARbXonkOIa_mh_phjU9mYSHmHL8
error
smxwang said:
Hi guys, this is the a full Odin tar files for offical Nougat. Person outside the US can Flash and use it.
Unzip this package and get five file, flash it by Odin.
PS: It is better to flash the pit files. Don't worry, your Network unlocked status will remain same after updates.
mega: https://mega.nz/#!5Z5xwS4Z!WHLOkv-PV..._phjU9mYSHmHL8
By the way, Nougat on S7Active is too slow，I found S7's package in waiting it LoL....
Click to expand...
Click to collapse
Says provided decryption key is invalid.
sashaohio said:
Says provided decryption key is invalid.
Click to expand...
Click to collapse
Please try again....
Will tgis work to update the g930a from the qa4 nougat ota from earlier this year? Or would i have to downgrade to marshmallow first?
logoster said:
Will tgis work to update the g930a from the qa4 nougat ota from earlier this year? Or would i have to downgrade to marshmallow first?
Click to expand...
Click to collapse
backup and you can try. I don't have s7 and just get this package. In fact odin can flash as it can.
logoster said:
Will tgis work to update the g930a from the qa4 nougat ota from earlier this year? Or would i have to downgrade to marshmallow first?
Click to expand...
Click to collapse
It's a full firmware package so yes. You won't keep any of your data though.
Thanks for uploading this @smxwang
It worked for me to upgrade my rooted MM to rooted Nougat, and I used Flashfire to do a backup and restore of data and internal SD and haven't had any issues except that I can't download themes.
I have tried several times to download. I have copied and pasted key and still says I need a key. Can you remove the lock or can someone mirror?
will this allow future OTA update when ATT release them?
it says 'model dismatch fail'
why?
corrado85 said:
it says 'model dismatch fail'
why?
Click to expand...
Click to collapse
Do you have the right files for your model G930A or G935A. Normally that's the issue. Also make sure your using the official Odin when flashing factory firmware.
yes, i have the right files for my G930A, It must be because I'm using OdinPrinceComsy version
corrado85 said:
yes, i have the right files for my G930A, It must be because I'm using OdinPrinceComsy version
Click to expand...
Click to collapse
That would be the problem. Always use official Odin for stock firmware. Only us princecomsy Odin when flashing eng kernel.
it worked. thank you!
under options which should i select if I want full factory wipe (Fresh install)? or does it do automatically
thanks for your help
corrado85 said:
it says 'model dismatch fail'
why?
Click to expand...
Click to collapse
Which Odin are you using? If you use the Prince Comsy Odin you will get that. I accidentally used that version and got that message.
corrado85 said:
it worked. thank you!
under options which should i select if I want full factory wipe (Fresh install)? or does it do automatically
thanks for your help
Click to expand...
Click to collapse
Using Odin, it will wipe automatically. Just install all 4 files and it'll wipe you completely.
Dumb question here, We can flash each file independently. EX: If i wanted to flash just the ap file to replace the eng boot i could do that...
Downloaded file but when extracting I got error message files are corrupted. Any suggestions
Download worked!
DragonMax08 said:
Downloaded file but when extracting I got error message files are corrupted. Any suggestions
Click to expand...
Click to collapse
I just downloaded the file and used it to flash a G930A successully. You should probably just re-download the file.
Thanks for the feedback but I got it to work. Idk but it wasn't extracting on my Mac so I tried on Windows and it worked. Am actually running it now on my phone and everything so far working as it should.
you mention the S7Active there,
does that mean you have the Nougat Odin files for that too ?
and where did you get these images from ? did you get them from their servers ? (somewhere like ? h t t p s://xdmd.sl.attcompute.com/agents/48838/1488/ ??)
Related
Hey!
I first got my galaxy s6, model; SM-G920I around start of May 2015 and I rooted via CF autoroot a few days after.
Haven't done much since, however, today I decided I wanted to update my software to lollipop 5.1 and to do that I first had to unroot via SuperSU and then update via Smart Switch.
After all the preparations were completed in Smart Switch, my device failed during the process, sending me to the cyan screen saying, "An error has occured while updating the device software..." .
This incident rendered my device unrecognizable by Smart Switch and since then I have not been able to flash the stock SM-G920I ROM via odin, as it always FAILS.
tl;dr
-rooted phone
-unrooted phone for software update
-device failed during smartswitch process
-cannot flash stock via odin
Any help or suggestions would be greatly appreciated.
[EDIT]: I cannot get into recovery mode
Can you get to download mode?
prking07 said:
Can you get to download mode?
Click to expand...
Click to collapse
yeah i can. that's how i tried flashing stock rom with latest odin but it kept failing.
delete the hidden file from the firmware..
Alex-V said:
delete the hidden file from the firmware..
Click to expand...
Click to collapse
What is the hidden file called and how do I get to the location?
The only thing I can do with my phone at the moment is go into download mode.
mojo_jodroid said:
What is the hidden file called and how do I get to the location?
The only thing I can do with my phone at the moment is go into download mode.
Click to expand...
Click to collapse
search in my replys I wrote that 2 or 3 times how to do this.. on work now can not write much here
BTW look here for example
http://forum.xda-developers.com/showthread.php?t=3133900
Alex-V said:
search in my replys I wrote that 2 or 3 times how to do this.. on work now can not write much here
BTW look here for example
http://forum.xda-developers.com/showthread.php?t=3133900
Click to expand...
Click to collapse
Thank you for your replies but I'm am still unsure what you are talking about. I did look through your posts and found one where you linked this page http://forum.xda-developers.com/gal...lkit-skipsoft-android-toolkit-galaxy-t3101195
I downloaded it and I still don't know how to delete the file that you suggested.
mojo_jodroid said:
Thank you for your replies but I'm am still unsure what you are talking about. I did look through your posts and found one where you linked this page http://forum.xda-developers.com/gal...lkit-skipsoft-android-toolkit-galaxy-t3101195
I downloaded it and I still don't know how to delete the file that you suggested.
Click to expand...
Click to collapse
rename the. tar.md5 to. tar now extract the tar with winrar and delete the hidden.img ..now use the tool to make a new firmware file without the hidden.img and flash it with Odin..
Alex-V said:
rename the. tar.md5 to. tar now extract the tar with winrar and delete the hidden.img ..now use the tool to make a new firmware file without the hidden.img and flash it with Odin..
Click to expand...
Click to collapse
I presume you were talking about the "CF-Auto-Root-zeroflte-zerofltedv-smg920i" file.
There was only a Cache.img and Recovery.img but no hidden.img
[EDIT]: My mistake I found the hidden .img in the SM-G920I firmware. I will try the rest now.
Alex-V said:
rename the. tar.md5 to. tar now extract the tar with winrar and delete the hidden.img ..now use the tool to make a new firmware file without the hidden.img and flash it with Odin..
Click to expand...
Click to collapse
It worked! I am very grateful for your help. Vielen dank!
mojo_jodroid said:
It worked! I am very grateful for your help. Vielen dank!
Click to expand...
Click to collapse
Which tool did you use?
mojo_jodroid said:
I presume you were talking about the "CF-Auto-Root-zeroflte-zerofltedv-smg920i" file.
There was only a Cache.img and Recovery.img but no hidden.img
[EDIT]: My mistake I found the hidden .img in the SM-G920I firmware. I will try the rest now.
Click to expand...
Click to collapse
Could you explain how you found it please?
I have the same issue.
The screens you UL-ed dont help me.
I only see the first capture of yours appearing on my screen, but no hidden.img.
Thanks.
This did the trick. After 4 hours of frustration, this is the only thing that bailed me out. Thanks Alex :good:
Alex-V said:
rename the. tar.md5 to. tar now extract the tar with winrar and delete the hidden.img ..now use the tool to make a new firmware file without the hidden.img and flash it with Odin..
Click to expand...
Click to collapse
mojo_jodroid said:
Hey!
I first got my galaxy s6, model; SM-G920I around start of May 2015 and I rooted via CF autoroot a few days after.
Haven't done much since, however, today I decided I wanted to update my software to lollipop 5.1 and to do that I first had to unroot via SuperSU and then update via Smart Switch.
After all the preparations were completed in Smart Switch, my device failed during the process, sending me to the cyan screen saying, "An error has occured while updating the device software..." .
This incident rendered my device unrecognizable by Smart Switch and since then I have not been able to flash the stock SM-G920I ROM via odin, as it always FAILS.
tl;dr
-rooted phone
-unrooted phone for software update
-device failed during smartswitch process
-cannot flash stock via odin
Any help or suggestions would be greatly appreciated.
[EDIT]: I cannot get into recovery mode
Click to expand...
Click to collapse
Follow this video its tested https://www.youtube.com/watch?v=mi7O0OvnS2E
I was facing a very similar issue and this tip has saved me, thank you so much Alex-V
What is the hidden.img file used for and why does deleting it fix our issues?
Just curious,
Thank you again!
on a note 5 i can flash it that way too ?
if i have the same problem on a note 5 N920T (i know we are talking about S6 edge ) but doing that on any android with soft brick will work?
i managed to get the OF6 sprint full rom file through kies.
this is only to be flashed using odin in the ap slot.
you will probably lose root and your custom recovery.
you may be able to root it and restore the data . That up to you to try.
This is the Sprint version Only!
here is the link: if someone wants to provide a mirror that would be appreciated.
Disabling 'Reactivation Lock' from 'Security' in the settings allowed me to root and add a custom recovery (TWRP).
your on your own from here!
https://onedrive.live.com/redir?resid=CD08CE789EB6B040!1155&authkey=!AIOZNh5nLeYDbcs&ithint=file,md5
here is another link thats a zipped MD5.tar file. this must be unzipped before putting the file into odin ap slot . (thanks to itskapil for the link)
http://www.theandroidsoul.com/download/download-sprint-galaxy-s5-android-5-0-2-update-odin-tar-file/
It's always great to have a TAR file on PC. Thanks!
But btw, this is Android 5.0 update, right? Have read on android blogs that OF6 has been 5.1 update for T-Mobile Galaxy S6 sets. So..
Okay, it's 5.0.2. Brings Reactivation lock.
itskapil said:
It's always great to have a TAR file on PC. Thanks!
But btw, this is Android 5.0 update, right? Have read on android blogs that OF6 has been 5.1 update for T-Mobile Galaxy S6 sets. So..
Okay, it's 5.0.2. Brings Reactivation lock.
Click to expand...
Click to collapse
Yes it's still 5.0
Sprint GS5 Moars 6.2
Any special features or affects on this update? Thanks for taking the time doing this for us
Sent from my SM-G900P using XDA Free mobile app
Son Rise said:
Any special features or affects on this update? Thanks for taking the time doing this for us
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
this
http://support.sprint.com/support/a...pdateTheSoftwareVersionOnYourSamsungGalaxy#!/
First is this a necessary update? Second does one have to update to OD3 first before doing the update. I'm still on OA6
Cmicasa the Great XvX said:
First is this a necessary update? Second does one have to update to OD3 first before doing the update. I'm still on OA6
Click to expand...
Click to collapse
no you dont have to update and no it isnt necessary. but if you are on stock OA6 I would take to guess that this rom is 5 months newer with improvements in alot of areas. they claim its for factory reset protection (so someone cant steal your phone and just factory reset it and it theirs now) and for reactivation protection (same thing so noone can reactivate the phone and make it theirs)
if i was on straight stock i would update. if i was on a stock rooted i would either try and root it or wait for someone to root the tar file and make it flashable through recovery.
thats my take on it.
cool... thanks. I like the security features, but at the same time I may wait till the new Moar comes out to do the work.
Is there a new radio and modem version with this update?
BrickedHouse said:
Is there a new radio and modem version with this update?
Click to expand...
Click to collapse
yes its the full rom, modem, and firmware
Robalboa said:
yes its the full rom, modem, and firmware
Click to expand...
Click to collapse
Thank you for this and by chance has anyone seen a firmware/modem update only for OF6 yet?
Edit: Found! Thanks tdunham - https://www.androidfilehost.com/?w=files&flid=21717
I was just gonna show you that. Lol
Sprint GS5 Moars 6.2
Has anyone successfully loaded a custom recovery and possibly one of the available OA6 ROMs after updating to this full tar?
I know there are separate modem and firmware files, but I was just curious if anyone has tried to go there from full stock.
DurhamHusker said:
Has anyone successfully loaded a custom recovery and possibly one of the available OA6 ROMs after updating to this full tar?
I know there are separate modem and firmware files, but I was just curious if anyone has tried to go there from full stock.
Click to expand...
Click to collapse
Yes. In fact, I did a full rom install, with nand erase all (after a bad flash), and I still went back to OA6 and OD3 stock deodexed roms.
Flashing TWRP from Odin works fine after flashing OF6 or OD3. I also used the CF one click root method, and that also worked for me.
Everything I did was in Odin 3.10.6.
Chainfires auto root makes odin complains about the recovery and shows 'fuse>3', which (I assume) means I've already burnt thru three of the 400+ fuses in the phone (kernel, recovery and probably rooting). I've tried odin 3.10.6 and the version that comes with chainfires auto root. Towelroot v3 says my phone isn't supported, even when using the command mod options.
I'll boot back into Windowz and try this a few more times. I don't see/know how joshdv rooted his phone...
edit: let's add insult to injury. I can't downgrade the firmware/OS to OA6, says it fails OS version.
joshdv said:
Yes. In fact, I did a full rom install, with nand erase all (after a bad flash), and I still went back to OA6 and OD3 stock deodexed roms.
Flashing TWRP from Odin works fine after flashing OF6 or OD3. I also used the CF one click root method, and that also worked for me.
Everything I did was in Odin 3.10.6.
Click to expand...
Click to collapse
@joshdv
Maybe it would help if you posted the link to the autoroot tar and any special steps you took to get it working.
Buddlespit said:
Chainfires auto root makes odin complains about the recovery and shows 'fuse>3', which (I assume) means I've already burnt thru three of the 400+ fuses in the phone (kernel, recovery and probably rooting). I've tried odin 3.10.6 and the version that comes with chainfires auto root. Towelroot v3 says my phone isn't supported, even when using the command mod options.
I'll boot back into Windowz and try this a few more times. I don't see/know how joshdv rooted his phone...
edit: let's add insult to injury. I can't downgrade the firmware/OS to OA6, says it fails OS version.
Click to expand...
Click to collapse
Yes, you're stuck on the newer firmware now.
tdunham said:
Yes, you're stuck on the newer firmware now.
Click to expand...
Click to collapse
Ya, before I flashed this, I knew I was probably stuck with OF6 and that there currently wasn't a reliable method to get root. Now, it's a waiting game to see if someone comes up with a method/hack to root this. GooooOOOOO CHAINFIRE!!!
Buddlespit said:
Ya, before I flashed this, I knew I was probably stuck with OF6 and that there currently wasn't a reliable method to get root. Now, it's a waiting game to see if someone comes up with a method/hack to root this. GooooOOOOO CHAINFIRE!!!
Click to expand...
Click to collapse
Depends how long you're willing to wait and if you want to keep the warranty bit untripped.
If it doesn't matter, you can still flash custom recovery in odin and any one of the pre-rooted custom or stock roms that will run on the lollipop bootloader.
I got root by just installing custom recovery and flashing super su. zip
Sent from my SM-G900P using Tapatalk
lascoul said:
I got root by just installing custom recovery and flashing super su. zip
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Link for Super user zip???
Hi, Would like some help or information if possible. I have a rooted Note 3 (N9005) and had TWRP on it for about a year, then i tried downloading a new rom it says i need to have a newer TWRP. But when i try to download TWRP (any version) on Odin 3. It dowloads to the phone as i can see the blue line going along at the bottom, it then reboots to my rom and i can use the old rom alright but when i go into recovery it says in red writing Could not do normal boot-Odin mode. And i have to go back onto Odin and download TWRP again and my old rom is back again. 1: How do i delete TWRP altogether and start again ( if i can ). 2: If i cant delete TWRP how do i go about putting a new rom onboard. I have searched your forums and can not see any with same problem with a Note 3. I still have root access and have tried Rootify with no luck.
Newer TWRP and rom are probably based on newer firmware. I'd back up everything, Odin the newest firmware then reinstall TWRP and flash new rom. This way you'll have the newer bootloader and modem.
es0tericcha0s said:
Newer TWRP and rom are probably based on newer firmware. I'd back up everything, Odin the newest firmware then reinstall TWRP and flash new rom. This way you'll have the newer bootloader and modem.
Click to expand...
Click to collapse
Thanks es0tericcha0s. How do i get the latest firmware?.
The forum here for your phone. If you can't find it here then sammobile.com but really slow speeds there.
es0tericcha0s said:
The forum here for your phone. If you can't find it here then sammobile.com but really slow speeds there.
Click to expand...
Click to collapse
Ok will try thanks again for your input.
Normski15 said:
Ok will try thanks again for your input.
Click to expand...
Click to collapse
hi es0tericcha0s I downloaded the latest firmware from xda website, and Odin doesn't recognize it. So i downloaded another one and it still doesn`t recognize it. How do i get it to recognize them? i need MD5 or Tar or smd files
I wouldn't know without knowing what you downloaded. Often the .tar or .tar.md5 files that you download here are zipped to conserve space. Most likely just have to unzip it.
es0tericcha0s said:
I wouldn't know without knowing what you downloaded. Often the .tar or .tar.md5 files that you download here are zipped to conserve space. Most likely just have to unzip it.
Click to expand...
Click to collapse
Yes thats how it came. Do i unzip it and what files do i extract?
Not trying to be mean, but if you don't know how to unzip a file, this stuff might be a bit over your head.
es0tericcha0s said:
Not trying to be mean, but if you don't know how to unzip a file, this stuff might be a bit over your head.
Click to expand...
Click to collapse
Your`e not being mean but i did look into the folder and it had 3 files in it a META-INF, qaraqumus and system folder
Then you have a rom and not the firmware.
es0tericcha0s said:
Then you have a rom and not the firmware.
Click to expand...
Click to collapse
Ok , little confused as i went to xda and downloaded the latest firmware which is called : QS-N9005-LP-XXUGBPB1 - 01.05.16.
I downloaded a firmware and this time got the extracted file, i opened up odin and try to put the firmware onto my Note 3, but a little into the job it failed and now my phone wont boot up at all. It just gets to the white writing of Samsung Galaxy Note 3 SM-9005, and no further. Can you help?
What part did it fail on?
es0tericcha0s said:
What part did it fail on?
Click to expand...
Click to collapse
Right at the beginning. I found another one and am at present putting on my phone. It seems ok but has been on the Samsung with the blue dots for some time now. Fingers crossed.
Normski15 said:
Right at the beginning. I found another one and am at present putting on my phone. It seems ok but has been on the Samsung with the blue dots for some time now. Fingers crossed.
Click to expand...
Click to collapse
It's not uncommon that you would need to boot to recovery and perform a factory reset after the flash. And it will take awhile to reboot afterwards.
es0tericcha0s said:
It's not uncommon that you would need to boot to recovery and perform a factory reset after the flash. And it will take awhile to reboot afterwards.
Click to expand...
Click to collapse
Hi es0tericcha0s thanks for all of your help most appreciated, it still wasn`t booting after i turned it off after an hour. Woke up this morning read your note about factory resetting and bingo i now have my phone back. Thanks again for all your help. Norman:good:
Awesome! You're welcome. Enjoy!
es0tericcha0s said:
Awesome! You're welcome. Enjoy!
Click to expand...
Click to collapse
Its still not letting me put TWRP on is there any way round this, I downloaded TWRP 2.8.7.0 and did it via Odin 3.10.6. At the moment i have the recovery that came with the firmware and that is saying error on every Rom i am trying. If you cant help where do i put it on, Q & A or XDA Assist. Do i have to format my phone and start from scratch? Thanks in advance.
Need TWRP 3.0 + for Marshmallow roms.
The previous uploaded odin link for BRA1 went down, and you need to be on BRA1 to use the new oreo system updates. So I ended up buying them myself. Enjoy.
G930AUCS4BRA1
How can i update my 930A to oreo? I'm using 930u rom on my device
tx.takenori said:
How can i update my 930A to oreo? I'm using 930u rom on my device
Click to expand...
Click to collapse
I did it this morning, I used ODIN to go back to BRA1 AT&T version and then put the newest update on an empty SD card and applied update for SD using the recovery menu.
Hi, quick question. Sorry if this has been asked before. I already searched the entire forum for an answer.
So if I am on security patch March 1, 2017 (BQC2) version, can I just go ahead and flash this or do I need to be on an specific version in order to install this? I just don't want to brick. Thanks in advance.
Click to expand...
Click to collapse
I think I found my answer on another thread. For future references:
Quote:
Originally Posted by nasik.ubaid
I have Samsung Galaxy S7 AT&T
SM-G930A
6.0.1
Baseband: G930AUCU2APG1
Build Number : MMB29M.G930AUCU2APG1
Can i use flash my cell phone with this update??? Please help me.
You can Odin to BRA1, it'll be much faster than OTA all the way to BRA1 (which is alot of updates for where you currently are.
Im having issues flashing this file because it doesn't come up with the .md5 format. And Odin stays stuck on "file analysis" when i take off the .rar extension. Any one have any other firmwares i really dont want to flash all the way back and go through several updates just to get it up to date. Thanks.
Don't just take remove the. Rar, actually unzip them with 7zip,was the only way I could make them work myself
RN_ReFlux said:
Don't just take remove the. Rar, actually unzip them with 7zip,was the only way I could make them work myself
Click to expand...
Click to collapse
can you please give me a more in depth explanation? i extracted them first then removed tar then i tried removing tar and then extracting them but nothing is working? odin is not processing
SamGuy2020 said:
can you please give me a more in depth explanation? i extracted them first then removed tar then i tried removing tar and then extracting them but nothing is working? odin is not processing
Click to expand...
Click to collapse
you do realize you need to let odin run for more than 10 minutes sometimes. its literally processing 500mb -4gb of data. stop interrupting odin because its not finishing on your time. its called patience.
all you should be doing is extracting the md5's from the zip using winrar or something similar. when in odin you need to be clicking on the bl ap cp and csc and putting the extracted files in their places and hitting start and literally letting it run until it is finished without clicking anything. it is not STUCK on file processing... it IS processing the files
aarongotgame said:
you do realize you need to let odin run for more than 10 minutes sometimes. its literally processing 500mb -4gb of data. stop interrupting odin because its not finishing on your time. its called patience.
all you should be doing is extracting the md5's from the zip using winrar or something similar. when in odin you need to be clicking on the bl ap cp and csc and putting the extracted files in their places and hitting start and literally letting it run until it is finished without clicking anything. it is not STUCK on file processing... it IS processing the files
Click to expand...
Click to collapse
Thanks, yeah i figured it out that I wasn't unpacking them correctly. On oreo now
SamGuy2020 said:
Thanks, yeah i figured it out that I wasn't unpacking them correctly. On oreo now
Click to expand...
Click to collapse
Hi, im not in the US, how do you have oreo? do you have the firnware? can you send me please, my email [email protected]
So my dad got this new s7 edge for me. i used it for 1 day or so and realised that the android version is till on 6.0.1 . i tried to update the device manually but it says that its up-to-date, but im sure enough that its not. i also tried the smart switch method from Pc , but there is now update option in the smartswitch software as if the device is upto date.
I downloaded a root checker app to see if the device has been rooted or not , but the app shows that there are no signs for rooting. Can someone please help me with this, im tired of trying.
Saad Mansuri said:
So my dad got this new s7 edge for me. i used it for 1 day or so and realised that the android version is till on 6.0.1 . i tried to update the device manually but it says that its up-to-date, but im sure enough that its not. i also tried the smart switch method from Pc , but there is now update option in the smartswitch software as if the device is upto date.
I downloaded a root checker app to see if the device has been rooted or not , but the app shows that there are no signs for rooting. Can someone please help me with this, im tired of trying.
Click to expand...
Click to collapse
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Fatal_Scythe said:
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Click to expand...
Click to collapse
Oh.. but i am a noob and dont know much about all these stuff can u provide me a link which contains thr proper instructions ?
Saad Mansuri said:
Oh.. but i am a noob and dont know much about all these stuff can u provide me a link which contains thr proper instructions ?
Click to expand...
Click to collapse
Yes sure. Give me some time to look up the Files you need. What's your Model Nr.?
Fatal_Scythe said:
Yes sure. Give me some time to look up the Files you need. What's your Model Nr.?
Click to expand...
Click to collapse
Model no. SM-G935T
Saad Mansuri said:
Model no. SM-G935T
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Fatal_Scythe said:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Click to expand...
Click to collapse
sure!
Fatal_Scythe said:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Click to expand...
Click to collapse
Alright , finally done downloading both of them and extracted that firmware file
Saad Mansuri said:
Alright , finally done downloading both of them and extracted that firmware file
Click to expand...
Click to collapse
Good. One Question first: is the Firmware a single .tar File? If yes, then start Odin, select AP and select the Extracted Firmware File.
After that (Backup all your Important Data first before proceeding!) you have to put your Phone into the Download Mode, Power it off, wait a few Seconds, and then press and hold Volume Down Button and Home Button and after that press and hold the Power Button. If you get a Blue Screen displaying a Warning, everything is good and you can enter the Download Mode by pressing Volume Up Button another Time. Then Connect it to your PC and wait for Odin to say "Added!" after that simply hit Start to Flash.
Fatal_Scythe said:
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Click to expand...
Click to collapse
Fatal_Scythe said:
Good. One Question first: is the Firmware a single .tar File? If yes, then start Odin, select AP and select the Extracted Firmware File.
After that (Backup all your Important Data first before proceeding!) you have to put your Phone into the Download Mode, Power it off, wait a few Seconds, and then press and hold Volume Down Button and Home Button and after that press and hold the Power Button. If you get a Blue Screen displaying a Warning, everything is good and you can enter the Download Mode by pressing Volume Up Button another Time. Then Connect it to your PC and wait for Odin to say "Added!" after that simply hit Start to Flash.
Click to expand...
Click to collapse
Oh understood , But there are 5 files. And i have a question or 2 to ask , if the usb connection gets interrupted will it do any bad to my phone ? And how much time.will it take to complete ?
Saad Mansuri said:
Oh understood , But there are 5 files. And i have a question or 2 to ask , if the usb connection gets interrupted will it do any bad to my phone ? And how much time.will it take to complete ?
Click to expand...
Click to collapse
Answer 1: If it gets interrupted while flash, it normally shouldn't do any damage. It would be then called a Soft-Brick and you would have to flash it again.
Answer 2: Depends on what File Size the Firmware has. But normally it shouldn't take more than 5-10 Minutes.
If I understood right, you have 5 Files.
Do they (kinda) look like this or have such letters in it?
- BL ...
- AP ...
- CP ...
- CSC ...
- USERDATA ...
If yes, then you just have to put the files to the correct Tab. Like BL ... to the BL tab and CSC to the CSC Tab.
Fatal_Scythe said:
Answer 1: If it gets interrupted while flash, it normally shouldn't do any damage. It would be then called a Soft-Brick and you would have to flash it again.
Answer 2: Depends on what File Size the Firmware has. But normally it shouldn't take more than 5-10 Minutes.
If I understood right, you have 5 Files.
Do they (kinda) look like this or have such letters in it?
- BL ...
- AP ...
- CP ...
- CSC ...
- USERDATA ...
If yes, then you just have to put the files to the correct Tab. Like BL ... to the BL tab and CSC to the CSC Tab.
Click to expand...
Click to collapse
yep thats correct , 4 of them u mentioned are present but instead of USERDATA , there's HOME_CSC_TMB.
If thats not a problem , i must start the process
Saad Mansuri said:
yep thats correct , 4 of them u mentioned are present but instead of USERDATA , there's HOME_CSC_TMB.
If thats not a problem , i must start the process
Click to expand...
Click to collapse
A HOME_CSC File is no Problem either.
Good Luck!
Fatal_Scythe said:
A HOME_CSC File is no Problem either.
Good Luck!
Click to expand...
Click to collapse
Finally i got some time for flashing the ROM.
I did exactly as u told me too.. and guess what, it WORKED !!!
Im using 7.0 right now and its amazing i cant thank you enough bro..
Someone give this man a medal ?
Saad Mansuri said:
Finally i got some time for flashing the ROM.
I did exactly as u told me too.. and guess what, it WORKED !!!
Im using 7.0 right now and its amazing i cant thank you enough bro..
Someone give this man a medal
Click to expand...
Click to collapse
That's great! -> Check your PN: I'm sure you're gonna enjoy your Device on 8.0 even more hehe
Greetings^^