The previous uploaded odin link for BRA1 went down, and you need to be on BRA1 to use the new oreo system updates. So I ended up buying them myself. Enjoy.
G930AUCS4BRA1
How can i update my 930A to oreo? I'm using 930u rom on my device
tx.takenori said:
How can i update my 930A to oreo? I'm using 930u rom on my device
Click to expand...
Click to collapse
I did it this morning, I used ODIN to go back to BRA1 AT&T version and then put the newest update on an empty SD card and applied update for SD using the recovery menu.
Hi, quick question. Sorry if this has been asked before. I already searched the entire forum for an answer.
So if I am on security patch March 1, 2017 (BQC2) version, can I just go ahead and flash this or do I need to be on an specific version in order to install this? I just don't want to brick. Thanks in advance.
Click to expand...
Click to collapse
I think I found my answer on another thread. For future references:
Quote:
Originally Posted by nasik.ubaid
I have Samsung Galaxy S7 AT&T
SM-G930A
6.0.1
Baseband: G930AUCU2APG1
Build Number : MMB29M.G930AUCU2APG1
Can i use flash my cell phone with this update??? Please help me.
You can Odin to BRA1, it'll be much faster than OTA all the way to BRA1 (which is alot of updates for where you currently are.
Im having issues flashing this file because it doesn't come up with the .md5 format. And Odin stays stuck on "file analysis" when i take off the .rar extension. Any one have any other firmwares i really dont want to flash all the way back and go through several updates just to get it up to date. Thanks.
Don't just take remove the. Rar, actually unzip them with 7zip,was the only way I could make them work myself
RN_ReFlux said:
Don't just take remove the. Rar, actually unzip them with 7zip,was the only way I could make them work myself
Click to expand...
Click to collapse
can you please give me a more in depth explanation? i extracted them first then removed tar then i tried removing tar and then extracting them but nothing is working? odin is not processing
SamGuy2020 said:
can you please give me a more in depth explanation? i extracted them first then removed tar then i tried removing tar and then extracting them but nothing is working? odin is not processing
Click to expand...
Click to collapse
you do realize you need to let odin run for more than 10 minutes sometimes. its literally processing 500mb -4gb of data. stop interrupting odin because its not finishing on your time. its called patience.
all you should be doing is extracting the md5's from the zip using winrar or something similar. when in odin you need to be clicking on the bl ap cp and csc and putting the extracted files in their places and hitting start and literally letting it run until it is finished without clicking anything. it is not STUCK on file processing... it IS processing the files
aarongotgame said:
you do realize you need to let odin run for more than 10 minutes sometimes. its literally processing 500mb -4gb of data. stop interrupting odin because its not finishing on your time. its called patience.
all you should be doing is extracting the md5's from the zip using winrar or something similar. when in odin you need to be clicking on the bl ap cp and csc and putting the extracted files in their places and hitting start and literally letting it run until it is finished without clicking anything. it is not STUCK on file processing... it IS processing the files
Click to expand...
Click to collapse
Thanks, yeah i figured it out that I wasn't unpacking them correctly. On oreo now
SamGuy2020 said:
Thanks, yeah i figured it out that I wasn't unpacking them correctly. On oreo now
Click to expand...
Click to collapse
Hi, im not in the US, how do you have oreo? do you have the firnware? can you send me please, my email [email protected]
Related
Hey!
I first got my galaxy s6, model; SM-G920I around start of May 2015 and I rooted via CF autoroot a few days after.
Haven't done much since, however, today I decided I wanted to update my software to lollipop 5.1 and to do that I first had to unroot via SuperSU and then update via Smart Switch.
After all the preparations were completed in Smart Switch, my device failed during the process, sending me to the cyan screen saying, "An error has occured while updating the device software..." .
This incident rendered my device unrecognizable by Smart Switch and since then I have not been able to flash the stock SM-G920I ROM via odin, as it always FAILS.
tl;dr
-rooted phone
-unrooted phone for software update
-device failed during smartswitch process
-cannot flash stock via odin
Any help or suggestions would be greatly appreciated.
[EDIT]: I cannot get into recovery mode
Can you get to download mode?
prking07 said:
Can you get to download mode?
Click to expand...
Click to collapse
yeah i can. that's how i tried flashing stock rom with latest odin but it kept failing.
delete the hidden file from the firmware..
Alex-V said:
delete the hidden file from the firmware..
Click to expand...
Click to collapse
What is the hidden file called and how do I get to the location?
The only thing I can do with my phone at the moment is go into download mode.
mojo_jodroid said:
What is the hidden file called and how do I get to the location?
The only thing I can do with my phone at the moment is go into download mode.
Click to expand...
Click to collapse
search in my replys I wrote that 2 or 3 times how to do this.. on work now can not write much here
BTW look here for example
http://forum.xda-developers.com/showthread.php?t=3133900
Alex-V said:
search in my replys I wrote that 2 or 3 times how to do this.. on work now can not write much here
BTW look here for example
http://forum.xda-developers.com/showthread.php?t=3133900
Click to expand...
Click to collapse
Thank you for your replies but I'm am still unsure what you are talking about. I did look through your posts and found one where you linked this page http://forum.xda-developers.com/gal...lkit-skipsoft-android-toolkit-galaxy-t3101195
I downloaded it and I still don't know how to delete the file that you suggested.
mojo_jodroid said:
Thank you for your replies but I'm am still unsure what you are talking about. I did look through your posts and found one where you linked this page http://forum.xda-developers.com/gal...lkit-skipsoft-android-toolkit-galaxy-t3101195
I downloaded it and I still don't know how to delete the file that you suggested.
Click to expand...
Click to collapse
rename the. tar.md5 to. tar now extract the tar with winrar and delete the hidden.img ..now use the tool to make a new firmware file without the hidden.img and flash it with Odin..
Alex-V said:
rename the. tar.md5 to. tar now extract the tar with winrar and delete the hidden.img ..now use the tool to make a new firmware file without the hidden.img and flash it with Odin..
Click to expand...
Click to collapse
I presume you were talking about the "CF-Auto-Root-zeroflte-zerofltedv-smg920i" file.
There was only a Cache.img and Recovery.img but no hidden.img
[EDIT]: My mistake I found the hidden .img in the SM-G920I firmware. I will try the rest now.
Alex-V said:
rename the. tar.md5 to. tar now extract the tar with winrar and delete the hidden.img ..now use the tool to make a new firmware file without the hidden.img and flash it with Odin..
Click to expand...
Click to collapse
It worked! I am very grateful for your help. Vielen dank!
mojo_jodroid said:
It worked! I am very grateful for your help. Vielen dank!
Click to expand...
Click to collapse
Which tool did you use?
mojo_jodroid said:
I presume you were talking about the "CF-Auto-Root-zeroflte-zerofltedv-smg920i" file.
There was only a Cache.img and Recovery.img but no hidden.img
[EDIT]: My mistake I found the hidden .img in the SM-G920I firmware. I will try the rest now.
Click to expand...
Click to collapse
Could you explain how you found it please?
I have the same issue.
The screens you UL-ed dont help me.
I only see the first capture of yours appearing on my screen, but no hidden.img.
Thanks.
This did the trick. After 4 hours of frustration, this is the only thing that bailed me out. Thanks Alex :good:
Alex-V said:
rename the. tar.md5 to. tar now extract the tar with winrar and delete the hidden.img ..now use the tool to make a new firmware file without the hidden.img and flash it with Odin..
Click to expand...
Click to collapse
mojo_jodroid said:
Hey!
I first got my galaxy s6, model; SM-G920I around start of May 2015 and I rooted via CF autoroot a few days after.
Haven't done much since, however, today I decided I wanted to update my software to lollipop 5.1 and to do that I first had to unroot via SuperSU and then update via Smart Switch.
After all the preparations were completed in Smart Switch, my device failed during the process, sending me to the cyan screen saying, "An error has occured while updating the device software..." .
This incident rendered my device unrecognizable by Smart Switch and since then I have not been able to flash the stock SM-G920I ROM via odin, as it always FAILS.
tl;dr
-rooted phone
-unrooted phone for software update
-device failed during smartswitch process
-cannot flash stock via odin
Any help or suggestions would be greatly appreciated.
[EDIT]: I cannot get into recovery mode
Click to expand...
Click to collapse
Follow this video its tested https://www.youtube.com/watch?v=mi7O0OvnS2E
I was facing a very similar issue and this tip has saved me, thank you so much Alex-V
What is the hidden.img file used for and why does deleting it fix our issues?
Just curious,
Thank you again!
on a note 5 i can flash it that way too ?
if i have the same problem on a note 5 N920T (i know we are talking about S6 edge ) but doing that on any android with soft brick will work?
Ok just got replacement S6 edge had D0l1 firmware on it out the box...flashed unikernel in ODIN on it for root....booted just fine and had root...then flashed latest TWRP through ODIN tried to reboot into recovery Now phone won't boot. if I force a restart it does Sammy logo then a white flash real quick to black screen followed by a vibrate then just stays black. Only thing I can do is get it in DL mode.
Now I have tried to DL the D0l1 Firmware from 2 different sources on here at XDA so I can ODIN back to stock but can't get Odin to recongize the zip.....so I extracted the files but says something is corrupt?. I am not a noobie when it comes to rooting and flashing and this is the deepest of trouble I have ever been in as far as Bricking a device. I have no clue what to do now???? Any help please!
Honestly, all I need is the D0l1 firmware which I cannot somehow get without it being a corrupt file
I just don't get it.....Odin will not recongize the D0l1 firmware for me to flash? I just Odin'd back my other S6 edge with broken screen to send back for insurance claim no problem with c09 firmware or the # before this D0l1. 3 different download sources same thing Odin will not see the zip file after clicking on AP.
I can' boot into recovery..does anybody have the stock recovery for tmobile that I can flash in ODIN??
Did you unlock the bootloader yet?
The Sickness said:
Did you unlock the bootloader yet?
Click to expand...
Click to collapse
How can I do it if I can't boot the phone?
Then you need to flash the stock ob1 firmware.
Can you get into dl mode?
The Sickness said:
Then you need to flash the stock ob1 firmware.
Can you get into dl mode?
Click to expand...
Click to collapse
Yes DL mode is the only thing I can get into...can you link me or get the file I need to flash in ODIN? bro I really need to have a working phone by tomorrow as I work from it! SMH....
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
The Sickness said:
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
Click to expand...
Click to collapse
Ok I tried to DL the D0l1 firmware from couple other places on here and when I unzipp it Winrar is popping up message saying the the file is corrupt but it unzips anyway then when I flash in ODIn it says Fail....not sure if that's because of the file or this new bootloader from Sammy is ****ing things up for people like us? I'm staring to get nervous....this DL from Sammy is gonna be a long time.
Also, I just noticed they have ODIN 3.10.7 out.....gonna DL that also as I have 3.10.6 still. see if that helps at all.
Yes...the dl will take a minute. If possible just leave your pc alone while it downloads.
If Winrar says its corrupted then it is. No sense in trying to flash it
The Sickness said:
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
Click to expand...
Click to collapse
OK, so I downloaded the file but like I said earlier (this is weird) When I unzip this file.....Winrar pops up and says the (archive is corrupt) but it unzips anyway but takes longer than your average file to unzip.....load it up in ODIN and when I start it goes through process and just fails? what can I do now?
How can the file be corrupted straight from Sammy???
Is there anyway you can get me the file already unzipped not saying it was corrupted?
I can upload the file. But it will take a while
The Sickness said:
I can upload the file. But it will take a while
Click to expand...
Click to collapse
Bro....I think I might be ****ed honestly, I hope not but it seems like if you get stuck in a BL with this new loader....it will not let you flash a stock image. My phone says in red at top when I force a restart (Recovery is not seadroid) I tried extracting just the recovery out of the D0l1 firmware and packed it up as a TAR and flashed but it just hangs and never completes the process. I have searched google to the end of the earth about trying to recover after this new firmware update but can't anything or anybody successful....just people stuck like me. Wish I would have just let it go and rolled stock cause I was gonna jump to the nexus probley.....but you and some others showed you were rooted and good....it all went downhill after odin'd TWRP
Your fine....my upload will take awhile. Its the tar file. So all you will have to do is flash in Odin
Your stuck because you didn't unlock the bootloader. If you get into download mode then your going to be ok. So just kick back for a few hours until my upload us done
The Sickness said:
Your fine....my upload will take awhile. Its the tar file. So all you will have to do is flash in Odin
Your stuck because you didn't unlock the bootloader. If you get into download mode then your going to be ok. So just kick back for a few hours until my upload us done
Click to expand...
Click to collapse
Mannnnnnnn, I hope your right....I have got myself out of these jams a bunch of times but this one seems lost.
I will post the link in the morning
The Sickness said:
I will post the link in the morning
Click to expand...
Click to collapse
ok, I'm at work till 5pm so I won't be able to try it till after that......thanks.
https://www.androidfilehost.com/?fid=24052804347846570
The Sickness said:
https://www.androidfilehost.com/?fid=24052804347846570
Click to expand...
Click to collapse
Thanks, gonna DL now then try to flash in ODIN....Did you check if it said corrupt after unzipping?
Ok just tried it.................ugh same thing.
sboot.bin
nand write start!!
failed!
complete (write) operation failed!
IDK what to do bro.....****ing $800 paperweight till someone figures this bull**** new bootloader out.
Hi guys, this is the a full Odin tar files for offical Nougat. Person outside the US can Flash and use it.
Unzip this package and get five file, flash it by Odin.
PS: It is better to flash the pit files. Don't worry, your Network unlocked status will remain same after updates.
mega: https://mega.nz/#!ZQg0FCoY
By the way, Nougat on S7Active is too slow，I found S7's package in waiting it LoL....
The decription key is: !WHLOkv-PVKMzWhe4ARbXonkOIa_mh_phjU9mYSHmHL8
error
smxwang said:
Hi guys, this is the a full Odin tar files for offical Nougat. Person outside the US can Flash and use it.
Unzip this package and get five file, flash it by Odin.
PS: It is better to flash the pit files. Don't worry, your Network unlocked status will remain same after updates.
mega: https://mega.nz/#!5Z5xwS4Z!WHLOkv-PV..._phjU9mYSHmHL8
By the way, Nougat on S7Active is too slow，I found S7's package in waiting it LoL....
Click to expand...
Click to collapse
Says provided decryption key is invalid.
sashaohio said:
Says provided decryption key is invalid.
Click to expand...
Click to collapse
Please try again....
Will tgis work to update the g930a from the qa4 nougat ota from earlier this year? Or would i have to downgrade to marshmallow first?
logoster said:
Will tgis work to update the g930a from the qa4 nougat ota from earlier this year? Or would i have to downgrade to marshmallow first?
Click to expand...
Click to collapse
backup and you can try. I don't have s7 and just get this package. In fact odin can flash as it can.
logoster said:
Will tgis work to update the g930a from the qa4 nougat ota from earlier this year? Or would i have to downgrade to marshmallow first?
Click to expand...
Click to collapse
It's a full firmware package so yes. You won't keep any of your data though.
Thanks for uploading this @smxwang
It worked for me to upgrade my rooted MM to rooted Nougat, and I used Flashfire to do a backup and restore of data and internal SD and haven't had any issues except that I can't download themes.
I have tried several times to download. I have copied and pasted key and still says I need a key. Can you remove the lock or can someone mirror?
will this allow future OTA update when ATT release them?
it says 'model dismatch fail'
why?
corrado85 said:
it says 'model dismatch fail'
why?
Click to expand...
Click to collapse
Do you have the right files for your model G930A or G935A. Normally that's the issue. Also make sure your using the official Odin when flashing factory firmware.
yes, i have the right files for my G930A, It must be because I'm using OdinPrinceComsy version
corrado85 said:
yes, i have the right files for my G930A, It must be because I'm using OdinPrinceComsy version
Click to expand...
Click to collapse
That would be the problem. Always use official Odin for stock firmware. Only us princecomsy Odin when flashing eng kernel.
it worked. thank you!
under options which should i select if I want full factory wipe (Fresh install)? or does it do automatically
thanks for your help
corrado85 said:
it says 'model dismatch fail'
why?
Click to expand...
Click to collapse
Which Odin are you using? If you use the Prince Comsy Odin you will get that. I accidentally used that version and got that message.
corrado85 said:
it worked. thank you!
under options which should i select if I want full factory wipe (Fresh install)? or does it do automatically
thanks for your help
Click to expand...
Click to collapse
Using Odin, it will wipe automatically. Just install all 4 files and it'll wipe you completely.
Dumb question here, We can flash each file independently. EX: If i wanted to flash just the ap file to replace the eng boot i could do that...
Downloaded file but when extracting I got error message files are corrupted. Any suggestions
Download worked!
DragonMax08 said:
Downloaded file but when extracting I got error message files are corrupted. Any suggestions
Click to expand...
Click to collapse
I just downloaded the file and used it to flash a G930A successully. You should probably just re-download the file.
Thanks for the feedback but I got it to work. Idk but it wasn't extracting on my Mac so I tried on Windows and it worked. Am actually running it now on my phone and everything so far working as it should.
you mention the S7Active there,
does that mean you have the Nougat Odin files for that too ?
and where did you get these images from ? did you get them from their servers ? (somewhere like ? h t t p s://xdmd.sl.attcompute.com/agents/48838/1488/ ??)
Hey maybe someone can give me a hand. Trying to flash back to stock on my Note 8 using the TMobil Firmware found [here](https://forum.xda-developers.com/galaxy-note-8/how-to/collection-firmware-rom-file-galaxy-t3676943). I put AP into AP. BL into BL, CP in CP, and CSC into CSC. Theres no PIT file in there. Do I used HOME_CRC or do anything with USERDATA??? I tried flashing using simFAIL but it wasnt working at all. The error im getting is SW REV CHECK FAIL : [adl]Fused 2 > Binary 1
Drackeo112 said:
Hey maybe someone can give me a hand. Trying to flash back to stock on my Note 8 using the TMobil Firmware found [here](https://forum.xda-developers.com/galaxy-note-8/how-to/collection-firmware-rom-file-galaxy-t3676943). I put AP into AP. BL into BL, CP in CP, and CSC into CSC. Theres no PIT file in there. Do I used HOME_CRC or do anything with USERDATA??? I tried flashing using simFAIL but it wasnt working at all. The error im getting is SW REV CHECK FAIL : [adl]Fused 2 > Binary 1
Click to expand...
Click to collapse
Start over from beginning use samfail step by step
kirschdog1 said:
Start over from beginning use samfail step by step
Click to expand...
Click to collapse
I did several times, and each time the same thing. My phone never rebooted after the first step. Im trying to flash back to tmobile but im getting " FAIL! Model dismatch fail" errors can cant get anywhere
Drackeo112 said:
I did several times, and each time the same thing. My phone never rebooted after the first step. Im trying to flash back to tmobile but im getting " FAIL! Model dismatch fail" errors can cant get anywhere
Click to expand...
Click to collapse
Read through the samfail thread at least 20 people had that same issue and got past it using a different variation of those steps listed in op. Also, don't forget to use search feature in the samfail op to look for others who have device mismatch errors and how they got it up and running.
kirschdog1 said:
Read through the samfail thread at least 20 people had that same issue and got past it using a different variation of those steps listed in op. Also, don't forget to use search feature in the samfail op to look for others who have device mismatch errors and how they got it up and running.
Click to expand...
Click to collapse
See I think Im getting lost on what goes where in ODIN. The AP goes to AP, BL to BL, CP to CP and CRC to CRC. Correct? What do I do with the HOME_CRC and USERDATA_CCT? Anything?
And do I make the Files TAR or keep them as MD5? Becasue the ext are tar.md5
Drackeo112 said:
See I think Im getting lost on what goes where in ODIN. The AP goes to AP, BL to BL, CP to CP and CRC to CRC. Correct? What do I do with the HOME_CRC and USERDATA_CCT? Anything?
And do I make the Files TAR or keep them as MD5? Becasue the ext are tar.md5
Click to expand...
Click to collapse
Leave them alone and only use csc not home csc or user data cct leave those alone.
Also use regular odin not prince odin
Drackeo112 said:
See I think Im getting lost on what goes where in ODIN. The AP goes to AP, BL to BL, CP to CP and CRC to CRC. Correct? What do I do with the HOME_CRC and USERDATA_CCT? Anything?
And do I make the Files TAR or keep them as MD5? Becasue the ext are tar.md5
Click to expand...
Click to collapse
You can't flash those with .MD5 at the end. Delete those (.md5) first.
Just so you know. your issue is because you took the update and you are incrimented. You are currently trying to downgrade and you cant. You must install the incrimented firmware to get working again. This also means No root for you.
me2151 said:
Just so you know. your issue is because you took the update and you are incrimented. You are currently trying to downgrade and you cant. You must install the incrimented firmware to get working again. This also means No root for you.
Click to expand...
Click to collapse
What do you mean by "You must install the incremented firmware to get working again." What and where do we find said firmware and are instructions posted anywhere, i must have missed them...
DeviceManagent said:
What do you mean by "You must install the incremented firmware to get working again." What and where do we find said firmware and are instructions posted anywhere, i must have missed them...
Click to expand...
Click to collapse
look around. why would instructions need to be posted? I have not released v2 root. and wont be released yet. You will have to deal with stock.
me2151 said:
look around. why would instructions need to be posted? I have not released v2 root. and wont be released yet. You will have to deal with stock.
Click to expand...
Click to collapse
I was rooted with v1 and updated to BQJA because another method was found thanks to you, and i would just re-root. When i flashed the BQJA files, it PASSED but my Note had error under the progress line on the screen. I would like to flash it correctly with the correct files until v2 is available. Device is doing stupid stuff like most apps F/Cing when they first open and some other odd things. I did a factory reset and wiped the cache in recovery and tried reflashing the factory firmware, still saying error on display, it PASSED, but im putting all my apps back and waiting for it to happen again....
So my dad got this new s7 edge for me. i used it for 1 day or so and realised that the android version is till on 6.0.1 . i tried to update the device manually but it says that its up-to-date, but im sure enough that its not. i also tried the smart switch method from Pc , but there is now update option in the smartswitch software as if the device is upto date.
I downloaded a root checker app to see if the device has been rooted or not , but the app shows that there are no signs for rooting. Can someone please help me with this, im tired of trying.
Saad Mansuri said:
So my dad got this new s7 edge for me. i used it for 1 day or so and realised that the android version is till on 6.0.1 . i tried to update the device manually but it says that its up-to-date, but im sure enough that its not. i also tried the smart switch method from Pc , but there is now update option in the smartswitch software as if the device is upto date.
I downloaded a root checker app to see if the device has been rooted or not , but the app shows that there are no signs for rooting. Can someone please help me with this, im tired of trying.
Click to expand...
Click to collapse
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Fatal_Scythe said:
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Click to expand...
Click to collapse
Oh.. but i am a noob and dont know much about all these stuff can u provide me a link which contains thr proper instructions ?
Saad Mansuri said:
Oh.. but i am a noob and dont know much about all these stuff can u provide me a link which contains thr proper instructions ?
Click to expand...
Click to collapse
Yes sure. Give me some time to look up the Files you need. What's your Model Nr.?
Fatal_Scythe said:
Yes sure. Give me some time to look up the Files you need. What's your Model Nr.?
Click to expand...
Click to collapse
Model no. SM-G935T
Saad Mansuri said:
Model no. SM-G935T
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Fatal_Scythe said:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Click to expand...
Click to collapse
sure!
Fatal_Scythe said:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Click to expand...
Click to collapse
Alright , finally done downloading both of them and extracted that firmware file
Saad Mansuri said:
Alright , finally done downloading both of them and extracted that firmware file
Click to expand...
Click to collapse
Good. One Question first: is the Firmware a single .tar File? If yes, then start Odin, select AP and select the Extracted Firmware File.
After that (Backup all your Important Data first before proceeding!) you have to put your Phone into the Download Mode, Power it off, wait a few Seconds, and then press and hold Volume Down Button and Home Button and after that press and hold the Power Button. If you get a Blue Screen displaying a Warning, everything is good and you can enter the Download Mode by pressing Volume Up Button another Time. Then Connect it to your PC and wait for Odin to say "Added!" after that simply hit Start to Flash.
Fatal_Scythe said:
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Click to expand...
Click to collapse
Fatal_Scythe said:
Good. One Question first: is the Firmware a single .tar File? If yes, then start Odin, select AP and select the Extracted Firmware File.
After that (Backup all your Important Data first before proceeding!) you have to put your Phone into the Download Mode, Power it off, wait a few Seconds, and then press and hold Volume Down Button and Home Button and after that press and hold the Power Button. If you get a Blue Screen displaying a Warning, everything is good and you can enter the Download Mode by pressing Volume Up Button another Time. Then Connect it to your PC and wait for Odin to say "Added!" after that simply hit Start to Flash.
Click to expand...
Click to collapse
Oh understood , But there are 5 files. And i have a question or 2 to ask , if the usb connection gets interrupted will it do any bad to my phone ? And how much time.will it take to complete ?
Saad Mansuri said:
Oh understood , But there are 5 files. And i have a question or 2 to ask , if the usb connection gets interrupted will it do any bad to my phone ? And how much time.will it take to complete ?
Click to expand...
Click to collapse
Answer 1: If it gets interrupted while flash, it normally shouldn't do any damage. It would be then called a Soft-Brick and you would have to flash it again.
Answer 2: Depends on what File Size the Firmware has. But normally it shouldn't take more than 5-10 Minutes.
If I understood right, you have 5 Files.
Do they (kinda) look like this or have such letters in it?
- BL ...
- AP ...
- CP ...
- CSC ...
- USERDATA ...
If yes, then you just have to put the files to the correct Tab. Like BL ... to the BL tab and CSC to the CSC Tab.
Fatal_Scythe said:
Answer 1: If it gets interrupted while flash, it normally shouldn't do any damage. It would be then called a Soft-Brick and you would have to flash it again.
Answer 2: Depends on what File Size the Firmware has. But normally it shouldn't take more than 5-10 Minutes.
If I understood right, you have 5 Files.
Do they (kinda) look like this or have such letters in it?
- BL ...
- AP ...
- CP ...
- CSC ...
- USERDATA ...
If yes, then you just have to put the files to the correct Tab. Like BL ... to the BL tab and CSC to the CSC Tab.
Click to expand...
Click to collapse
yep thats correct , 4 of them u mentioned are present but instead of USERDATA , there's HOME_CSC_TMB.
If thats not a problem , i must start the process
Saad Mansuri said:
yep thats correct , 4 of them u mentioned are present but instead of USERDATA , there's HOME_CSC_TMB.
If thats not a problem , i must start the process
Click to expand...
Click to collapse
A HOME_CSC File is no Problem either.
Good Luck!
Fatal_Scythe said:
A HOME_CSC File is no Problem either.
Good Luck!
Click to expand...
Click to collapse
Finally i got some time for flashing the ROM.
I did exactly as u told me too.. and guess what, it WORKED !!!
Im using 7.0 right now and its amazing i cant thank you enough bro..
Someone give this man a medal ?
Saad Mansuri said:
Finally i got some time for flashing the ROM.
I did exactly as u told me too.. and guess what, it WORKED !!!
Im using 7.0 right now and its amazing i cant thank you enough bro..
Someone give this man a medal
Click to expand...
Click to collapse
That's great! -> Check your PN: I'm sure you're gonna enjoy your Device on 8.0 even more hehe
Greetings^^