Hey maybe someone can give me a hand. Trying to flash back to stock on my Note 8 using the TMobil Firmware found [here](https://forum.xda-developers.com/galaxy-note-8/how-to/collection-firmware-rom-file-galaxy-t3676943). I put AP into AP. BL into BL, CP in CP, and CSC into CSC. Theres no PIT file in there. Do I used HOME_CRC or do anything with USERDATA??? I tried flashing using simFAIL but it wasnt working at all. The error im getting is SW REV CHECK FAIL : [adl]Fused 2 > Binary 1
Drackeo112 said:
Hey maybe someone can give me a hand. Trying to flash back to stock on my Note 8 using the TMobil Firmware found [here](https://forum.xda-developers.com/galaxy-note-8/how-to/collection-firmware-rom-file-galaxy-t3676943). I put AP into AP. BL into BL, CP in CP, and CSC into CSC. Theres no PIT file in there. Do I used HOME_CRC or do anything with USERDATA??? I tried flashing using simFAIL but it wasnt working at all. The error im getting is SW REV CHECK FAIL : [adl]Fused 2 > Binary 1
Click to expand...
Click to collapse
Start over from beginning use samfail step by step
kirschdog1 said:
Start over from beginning use samfail step by step
Click to expand...
Click to collapse
I did several times, and each time the same thing. My phone never rebooted after the first step. Im trying to flash back to tmobile but im getting " FAIL! Model dismatch fail" errors can cant get anywhere
Drackeo112 said:
I did several times, and each time the same thing. My phone never rebooted after the first step. Im trying to flash back to tmobile but im getting " FAIL! Model dismatch fail" errors can cant get anywhere
Click to expand...
Click to collapse
Read through the samfail thread at least 20 people had that same issue and got past it using a different variation of those steps listed in op. Also, don't forget to use search feature in the samfail op to look for others who have device mismatch errors and how they got it up and running.
kirschdog1 said:
Read through the samfail thread at least 20 people had that same issue and got past it using a different variation of those steps listed in op. Also, don't forget to use search feature in the samfail op to look for others who have device mismatch errors and how they got it up and running.
Click to expand...
Click to collapse
See I think Im getting lost on what goes where in ODIN. The AP goes to AP, BL to BL, CP to CP and CRC to CRC. Correct? What do I do with the HOME_CRC and USERDATA_CCT? Anything?
And do I make the Files TAR or keep them as MD5? Becasue the ext are tar.md5
Drackeo112 said:
See I think Im getting lost on what goes where in ODIN. The AP goes to AP, BL to BL, CP to CP and CRC to CRC. Correct? What do I do with the HOME_CRC and USERDATA_CCT? Anything?
And do I make the Files TAR or keep them as MD5? Becasue the ext are tar.md5
Click to expand...
Click to collapse
Leave them alone and only use csc not home csc or user data cct leave those alone.
Also use regular odin not prince odin
Drackeo112 said:
See I think Im getting lost on what goes where in ODIN. The AP goes to AP, BL to BL, CP to CP and CRC to CRC. Correct? What do I do with the HOME_CRC and USERDATA_CCT? Anything?
And do I make the Files TAR or keep them as MD5? Becasue the ext are tar.md5
Click to expand...
Click to collapse
You can't flash those with .MD5 at the end. Delete those (.md5) first.
Just so you know. your issue is because you took the update and you are incrimented. You are currently trying to downgrade and you cant. You must install the incrimented firmware to get working again. This also means No root for you.
me2151 said:
Just so you know. your issue is because you took the update and you are incrimented. You are currently trying to downgrade and you cant. You must install the incrimented firmware to get working again. This also means No root for you.
Click to expand...
Click to collapse
What do you mean by "You must install the incremented firmware to get working again." What and where do we find said firmware and are instructions posted anywhere, i must have missed them...
DeviceManagent said:
What do you mean by "You must install the incremented firmware to get working again." What and where do we find said firmware and are instructions posted anywhere, i must have missed them...
Click to expand...
Click to collapse
look around. why would instructions need to be posted? I have not released v2 root. and wont be released yet. You will have to deal with stock.
me2151 said:
look around. why would instructions need to be posted? I have not released v2 root. and wont be released yet. You will have to deal with stock.
Click to expand...
Click to collapse
I was rooted with v1 and updated to BQJA because another method was found thanks to you, and i would just re-root. When i flashed the BQJA files, it PASSED but my Note had error under the progress line on the screen. I would like to flash it correctly with the correct files until v2 is available. Device is doing stupid stuff like most apps F/Cing when they first open and some other odd things. I did a factory reset and wiped the cache in recovery and tried reflashing the factory firmware, still saying error on display, it PASSED, but im putting all my apps back and waiting for it to happen again....
Related
I had tried to root a friends I605 or Verizon Note II yesterday and about 3/4 of the way through Casual's one click method on the VramC3 4.1.2 version it failed. This left my phone in download mode and upon removal of battery and reinsertion, the phone just went into a boot loop. This is an error that is known to Casual and is being worked on, same error can occur if you use the wrong version on the wrong software version. This can just be resolved by flashing the pit only file the schI605-16gb.pit which you can find on this forum, in Odin. Just use Odin to flash this file alone in the PIT section not the pda or phone section. Your phone will boot and work correctly. If you discover you have the corret Casual package just retry the process, it worked for me the second time.
Thank you very much for your post. Much appreciated and know this will help out others. I'll add this to the FAQ board.
Where did casual fail for you and what error did you get?
i'll keep this thread saved just in case something goes wrong during my root
This really helps those who got failure through the CASUAL. Thanks a lot!
darkchild128 said:
i'll keep this thread saved just in case something goes wrong during my root
Click to expand...
Click to collapse
basil 8386 said:
I had tried to root a friends I605 or Verizon Note II yesterday and about 3/4 of the way through Casual's one click method on the VramC3 4.1.2 version it failed. This left my phone in download mode and upon removal of battery and reinsertion, the phone just went into a boot loop. This is an error that is known to Casual and is being worked on, same error can occur if you use the wrong version on the wrong software version. This can just be resolved by flashing the pit only file the schI605-16gb.pit which you can find on this forum, in Odin. Just use Odin to flash this file alone in the PIT section not the pda or phone section. Your phone will boot and work correctly. If you discover you have the corret Casual package just retry the process, it worked for me the second time.
Click to expand...
Click to collapse
Can I ask you how you were able to just flash the pit only file? I have tried to do that and it says no binary is selected? I have screwed my phone up and am trying everything possible to get it back in working fashion. Thank you
Can I ask you how you were able to just flash the pit only file? I have tried to do that and it says no binary is selected? I have screwed my phone up and am trying everything possible to get it back in working fashion. Thank you
Click to expand...
Click to collapse
I have experienced a problem with certain versions of Odin trying to just flash the pit file. I used Odin3 V1.7, try using that version, and if it doesn't work, switch computers.
Thank you very much for your post. Much appreciated and know this will help out others. I'll add this to the FAQ board.
Where did casual fail for you and what error did you get?
Click to expand...
Click to collapse
No problem guys, I know how frustrating it was for me to sit for hours trying to figure out what was wrong, not even being able to flash stock to it. It failed for me right as it was pushing files. I know it failed for several people in older versions, not VRAMC3, at the recovery flash portion of it. I finally took one piece of the alternate flash method, which was to flash both pit and stock firmware, but after that didn't work I instead just flashed the pit. Worked flawlessly.
basil 8386 said:
I have experienced a problem with certain versions of Odin trying to just flash the pit file. I used Odin3 V1.7, try using that version, and if it doesn't work, switch computers.
Click to expand...
Click to collapse
Thank you very much I am getting so frustrated with this lol, I appreciate the advise
Thank you very much I am getting so frustrated with this lol, I appreciate the advise
Click to expand...
Click to collapse
I can walk you through the repairs if you'd like. PM me and I'll give you my cell number, I help people remotely as well all the time, just let me know!
I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
smwoodward said:
I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
Click to expand...
Click to collapse
Here's a little more info that might help. I tried booting the device without holding the buttons just a second ago, and this is what is on the screen.
Image size too large! W:1080, H:1920
display image fail
Secure Fail: Kernel
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
smwoodward said:
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
Click to expand...
Click to collapse
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
jaredb03 said:
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
Click to expand...
Click to collapse
I haven't found anything. is there seriously no stock rom for this phone?
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
jaredb03 said:
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
Click to expand...
Click to collapse
I can get it into download mode. How do you get it into recovery?
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
chapelfreak said:
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
Click to expand...
Click to collapse
I have 2 megas in my shop right now that the same thing happened to them. Now they cannot be restored through ODIN and Kies says that the model/SN is incorrect.
I got the same problem as well tired to root it didn't work then tired to flash stock rom and I.got display image.to large can some give me right file for rogers Canada cell please and.what.do I need.checked.off in odin
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
can u give another link for those files, plz ? cannot download them from those links.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
Click to expand...
Click to collapse
nicelys said:
can u give another link for those files, plz ? cannot download them from those links.
Click to expand...
Click to collapse
The links work good at my end, but i have the i527m (canadian version) and i cannot use the files, but all the links work.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Click to expand...
Click to collapse
This worked great for me, I had to leave off the PIT file though. :good:
Ok just got replacement S6 edge had D0l1 firmware on it out the box...flashed unikernel in ODIN on it for root....booted just fine and had root...then flashed latest TWRP through ODIN tried to reboot into recovery Now phone won't boot. if I force a restart it does Sammy logo then a white flash real quick to black screen followed by a vibrate then just stays black. Only thing I can do is get it in DL mode.
Now I have tried to DL the D0l1 Firmware from 2 different sources on here at XDA so I can ODIN back to stock but can't get Odin to recongize the zip.....so I extracted the files but says something is corrupt?. I am not a noobie when it comes to rooting and flashing and this is the deepest of trouble I have ever been in as far as Bricking a device. I have no clue what to do now???? Any help please!
Honestly, all I need is the D0l1 firmware which I cannot somehow get without it being a corrupt file
I just don't get it.....Odin will not recongize the D0l1 firmware for me to flash? I just Odin'd back my other S6 edge with broken screen to send back for insurance claim no problem with c09 firmware or the # before this D0l1. 3 different download sources same thing Odin will not see the zip file after clicking on AP.
I can' boot into recovery..does anybody have the stock recovery for tmobile that I can flash in ODIN??
Did you unlock the bootloader yet?
The Sickness said:
Did you unlock the bootloader yet?
Click to expand...
Click to collapse
How can I do it if I can't boot the phone?
Then you need to flash the stock ob1 firmware.
Can you get into dl mode?
The Sickness said:
Then you need to flash the stock ob1 firmware.
Can you get into dl mode?
Click to expand...
Click to collapse
Yes DL mode is the only thing I can get into...can you link me or get the file I need to flash in ODIN? bro I really need to have a working phone by tomorrow as I work from it! SMH....
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
The Sickness said:
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
Click to expand...
Click to collapse
Ok I tried to DL the D0l1 firmware from couple other places on here and when I unzipp it Winrar is popping up message saying the the file is corrupt but it unzips anyway then when I flash in ODIn it says Fail....not sure if that's because of the file or this new bootloader from Sammy is ****ing things up for people like us? I'm staring to get nervous....this DL from Sammy is gonna be a long time.
Also, I just noticed they have ODIN 3.10.7 out.....gonna DL that also as I have 3.10.6 still. see if that helps at all.
Yes...the dl will take a minute. If possible just leave your pc alone while it downloads.
If Winrar says its corrupted then it is. No sense in trying to flash it
The Sickness said:
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
Click to expand...
Click to collapse
OK, so I downloaded the file but like I said earlier (this is weird) When I unzip this file.....Winrar pops up and says the (archive is corrupt) but it unzips anyway but takes longer than your average file to unzip.....load it up in ODIN and when I start it goes through process and just fails? what can I do now?
How can the file be corrupted straight from Sammy???
Is there anyway you can get me the file already unzipped not saying it was corrupted?
I can upload the file. But it will take a while
The Sickness said:
I can upload the file. But it will take a while
Click to expand...
Click to collapse
Bro....I think I might be ****ed honestly, I hope not but it seems like if you get stuck in a BL with this new loader....it will not let you flash a stock image. My phone says in red at top when I force a restart (Recovery is not seadroid) I tried extracting just the recovery out of the D0l1 firmware and packed it up as a TAR and flashed but it just hangs and never completes the process. I have searched google to the end of the earth about trying to recover after this new firmware update but can't anything or anybody successful....just people stuck like me. Wish I would have just let it go and rolled stock cause I was gonna jump to the nexus probley.....but you and some others showed you were rooted and good....it all went downhill after odin'd TWRP
Your fine....my upload will take awhile. Its the tar file. So all you will have to do is flash in Odin
Your stuck because you didn't unlock the bootloader. If you get into download mode then your going to be ok. So just kick back for a few hours until my upload us done
The Sickness said:
Your fine....my upload will take awhile. Its the tar file. So all you will have to do is flash in Odin
Your stuck because you didn't unlock the bootloader. If you get into download mode then your going to be ok. So just kick back for a few hours until my upload us done
Click to expand...
Click to collapse
Mannnnnnnn, I hope your right....I have got myself out of these jams a bunch of times but this one seems lost.
I will post the link in the morning
The Sickness said:
I will post the link in the morning
Click to expand...
Click to collapse
ok, I'm at work till 5pm so I won't be able to try it till after that......thanks.
https://www.androidfilehost.com/?fid=24052804347846570
The Sickness said:
https://www.androidfilehost.com/?fid=24052804347846570
Click to expand...
Click to collapse
Thanks, gonna DL now then try to flash in ODIN....Did you check if it said corrupt after unzipping?
Ok just tried it.................ugh same thing.
sboot.bin
nand write start!!
failed!
complete (write) operation failed!
IDK what to do bro.....****ing $800 paperweight till someone figures this bull**** new bootloader out.
My S6 edge has this weird issue where it only has 16gb interna storage after flashing the nexify custom rom. How can i fix this? Do i need to flash stock?
Thanks in advance!
jockep said:
My S6 edge has this weird issue where it only has 16gb interna storage after flashing the nexify custom rom. How can i fix this? Do i need to flash stock?
Thanks in advance!
Click to expand...
Click to collapse
Is it showing as only 16GB capacity or 16GB free memory left? Sometimes rarely flashing custom rom can mess up partitions. Flashing stock will fix this.
Stock is the way to go then i guess, thanks. Yes partition seems messed up.
jockep said:
Stock is the way to go then i guess, thanks. Yes partition seems messed up.
Click to expand...
Click to collapse
I would just flash stock. Did you do a clean install of the rom?
callumbr1 said:
I would just flash stock. Did you do a clean install of the rom?
Click to expand...
Click to collapse
Hi sorry for reviving this thread. i am having the same issue as OP and wanted to ask. i have an s6 edge plus and i rooted it to make it easier for me and wanted to go back to stock rom. so my cousin brother flashed it for me and it ended up having 16gb storage like the OP.
I was wondering is that the same thing as flashing stock or thats another thing?
I used odin3 3.12 today to flash saudi arabia version and it still shows 16gb. If its not the same thing as flashing stock rom, how do i go about doing it?
Thank you very much
shairaf said:
Hi sorry for reviving this thread. i am having the same issue as OP and wanted to ask. i have an s6 edge plus and i rooted it to make it easier for me and wanted to go back to stock rom. so my cousin brother flashed it for me and it ended up having 16gb storage like the OP.
I was wondering is that the same thing as flashing stock or thats another thing?
I used odin3 3.12 today to flash saudi arabia version and it still shows 16gb. If its not the same thing as flashing stock rom, how do i go about doing it?
Thank you very much
Click to expand...
Click to collapse
What you need to do is flash the correct pit file with the rom to repartition the device.
Whats the model of the device?
The firmware and region you want?
The android version?
Tell me these and ill link you to the correct files and info how to do it.
callumbr1 said:
What you need to do is flash the correct pit file with the rom to repartition the device.
Whats the model of the device?
The firmware and region you want?
The android version?
Tell me these and ill link you to the correct files and info how to do it.
Click to expand...
Click to collapse
Model Number = SM-G928C
Firmware = I am not sure what is firmware number, is it Baseband version (G928FXXU3BPI9) or Build Number (MMB29K.G928CXXS3BPL3).
Region = I am not entirely sure if i can install any region. this mobile was bought from saudi arabia, medina. So any suitable version should be fine?
Android version = 6.0.1
Hope i answered correctly.
Thank you very much for the help you are providing
shairaf said:
Model Number = SM-G928C
Firmware = I am not sure what is firmware number, is it Baseband version (G928FXXU3BPI9) or Build Number (MMB29K.G928CXXS3BPL3).
Region = I am not entirely sure if i can install any region. this mobile was bought from saudi arabia, medina. So any suitable version should be fine?
Android version = 6.0.1
Hope i answered correctly.
Thank you very much for the help you are providing
Click to expand...
Click to collapse
Is your phone network unlocked? Or can use any sim card?
callumbr1 said:
Is your phone network unlocked? Or can use any sim card?
Click to expand...
Click to collapse
I believe yes, since this phone was bought from Saudi, but i am able to use it in Maldives using Dhiraagu (ISP) sim card.
shairaf said:
I believe yes, since this phone was bought from Saudi, but i am able to use it in Maldives using Dhiraagu (ISP) sim card.
Click to expand...
Click to collapse
EDIT: FLASH THIS ONE
https://www.sammobile.com/firmwares/download/116752/G928CXXS3BPL3_G928COJV3BPJ1_PAK/
Along with this PIT file
https://drive.google.com/file/d/0B-YraR6_UzhUMFZRTldXd1FfczA/view?usp=drivesdk
8nsert the pit in odin in PIT. Odin options should be auto reboot checked, f reset time checked and repartition checked.
Let me know of any errors.
callumbr1 said:
Download and flash this through odin.
https://www.sammobile.com/firmwares/download/109815/G928CXXU3BPJ5_G928COJV3BPJ1_XFU/
Do you need instructions how to flash?
Click to expand...
Click to collapse
Wow thanks, only difference im seeing is that i used the latest update one for saudi and it does not say (STC). is that the reason?
No, i kind of learned by watching sammobile youtube guide. so i can do it
Thank you once again, i will let you know how it goes. takes 2-3 hours to download cause im a free sammobile user. hehe
Thank you very much.
EDIT01: ok, i am downloading the Pakistan version and the google drive PIT. thank you
shairaf said:
Wow thanks, only difference im seeing is that i used the latest update one for saudi and it does not say (STC). is that the reason?
No, i kind of learned by watching sammobile youtube guide. so i can do it
Thank you once again, i will let you know how it goes. takes 2-3 hours to download cause im a free sammobile user. hehe
Thank you very much.
Click to expand...
Click to collapse
Check my other post above. You need to download and flash the 2nd one along with the pit file.
Try that one first. If it does not work try the first link, the saudi one
callumbr1 said:
Check my other post above. You need to download and flash the 2nd one along with the pit file.
Try that one first. If it does npt work try the first link, the saudi one
Click to expand...
Click to collapse
hehe. got it. i also editted my post a second before this post
will do.
shairaf said:
hehe. got it. i also editted my post a second before this post
will do.
Click to expand...
Click to collapse
Keep me updated
callumbr1 said:
Keep me updated
Click to expand...
Click to collapse
I Shall.
I also wanted to ask when i click on odin3 3.12 Pit tab, it says its only for Engineers. That kind of caught my eye.
Is it a risky thing using a pit file? as in a chance of bricking the phone or its just a warning odin3 gives?
shairaf said:
I Shall.
I also wanted to ask when i click on odin3 3.12 Pit tab, it says its only for Engineers. That kind of caught my eye.
Is it a risky thing using a pit file? as in a chance of bricking the phone or its just a warning odin3 gives?
Click to expand...
Click to collapse
Its just a warning. Dont worry about it. As long as you only flash it with the PAK firmware it will be fine. Its a message that will always pop up when you click on pit.
callumbr1 said:
Its just a warning. Dont worry about it. As long as you only flash it with the PAK firmware it will be fine. Its a message that will always pop up when you click on pit.
Click to expand...
Click to collapse
Sorry for the late response, it took 7 hours to download PAK version from Sammobile.
I just tried re flashing with PAK version and including the pit provided. but it shows the same result. storage as 16gb.
im downloading ARABIC (STC) one now to try.
Will put it to download and go to work and give you a headsup after trying within 4 hours (If the download has completed).
Thank you very much.
EDIT01:
http://imgur.com/a/6cdAH
Sorry i could not figure out how to post image using the forum one :S
EDIT02:
I just tried to flash my phone with the IRAN one where we had 4 files totally (this was the one we used when we went from rooted s6 edge plus to stock rom) but used only AP. This time i tried with all 4 and it says (Success 0/ Failure1).
So i just reflashed Saudi one i used before and now downloading Saudi (STC) from Sammobile. will let you know after i try it
Oh and i also wanted to ask. reflashing phone a number of time a day will pose any risk to it? or you can just do it any amount of time?
shairaf said:
Sorry for the late response, it took 7 hours to download PAK version from Sammobile.
I just tried re flashing with PAK version and including the pit provided. but it shows the same result. storage as 16gb.
im downloading ARABIC (STC) one now to try.
Will put it to download and go to work and give you a headsup after trying within 4 hours (If the download has completed).
Thank you very much.
EDIT01:
http://imgur.com/a/6cdAH
Sorry i could not figure out how to post image using the forum one :S
EDIT02:
I just tried to flash my phone with the IRAN one where we had 4 files totally (this was the one we used when we went from rooted s6 edge plus to stock rom) but used only AP. This time i tried with all 4 and it says (Success 0/ Failure1).
So i just reflashed Saudi one i used before and now downloading Saudi (STC) from Sammobile. will let you know after i try it
Oh and i also wanted to ask. reflashing phone a number of time a day will pose any risk to it? or you can just do it any amount of time?
Click to expand...
Click to collapse
The one you tried to flash with 4 files you need to flash all files not just one. Thats why it failed.
I have seen this happen before and it should flash the partition back to 32GB after flashing stock with pit.
Before you flash the next one reply here so i can guide you.
And dont worry about the amount of times you flash it. It will do no harm no matter how many times you flssh it.
callumbr1 said:
The one you tried to flash with 4 files you need to flash all files not just one. Thats why it failed.
I have seen this happen before and it should flash the partition back to 32GB after flashing stock with pit.
Before you flash the next one reply here so i can guide you.
And dont worry about the amount of times you flash it. It will do no harm no matter how many times you flssh it.
Click to expand...
Click to collapse
Hi, im currently at work and will be home within an hour.
This morning i used IRAN (4 file one) and used all 4 files on odin. Here is what i did in detail.
1. Opened Odin 3 v3.12
2. Uploaded BL (1st), AP (2nd), CP (3rd) and CSC (Last)
3. Under options - > only Auto Reboot and F.Reset Time was ticked.
4. I hold volume down, menu button and power button at same time and pressed volume up button.
5. I connected the phone to Computer.
6. Odin3 recognized phone and i clicked start.
Within 2-3 seconds it said it has failed, and i used the SAUDI file to reflash back to normal (As i was late for work).
.............................................................................................................................................................................................................................................................................................................................
For the PAK file with the PIT you provided, i did everything almost the same other than it had only AP file and i had Re-partition ticked as well. It flashed fine but showed the same 16gb storage limit.
I will be home soon and post here beforehand if its easier for you and allowed in forum to use skypecall or such, that is indeed fine for me as well.
Thank you very much.
shairaf said:
Hi, im currently at work and will be home within an hour.
This morning i used IRAN (4 file one) and used all 4 files on odin. Here is what i did in detail.
1. Opened Odin 3 v3.12
2. Uploaded BL (1st), AP (2nd), CP (3rd) and CSC (Last)
3. Under options - > only Auto Reboot and F.Reset Time was ticked.
4. I hold volume down, menu button and power button at same time and pressed volume up button.
5. I connected the phone to Computer.
6. Odin3 recognized phone and i clicked start.
Within 2-3 seconds it said it has failed, and i used the SAUDI file to reflash back to normal (As i was late for work).
.............................................................................................................................................................................................................................................................................................................................
For the PAK file with the PIT you provided, i did everything almost the same other than it had only AP file and i had Re-partition ticked as well. It flashed fine but showed the same 16gb storage limit.
I will be home soon and post here beforehand if its easier for you and allowed in forum to use skypecall or such, that is indeed fine for me as well.
Thank you very much.
Click to expand...
Click to collapse
Okay.... what error did you get in odin when trying to flash the 4 files?
I have whatsapp and facebook messenger, pm me when you are free after work
Hi guys, this is the a full Odin tar files for offical Nougat. Person outside the US can Flash and use it.
Unzip this package and get five file, flash it by Odin.
PS: It is better to flash the pit files. Don't worry, your Network unlocked status will remain same after updates.
mega: https://mega.nz/#!ZQg0FCoY
By the way, Nougat on S7Active is too slow，I found S7's package in waiting it LoL....
The decription key is: !WHLOkv-PVKMzWhe4ARbXonkOIa_mh_phjU9mYSHmHL8
error
smxwang said:
Hi guys, this is the a full Odin tar files for offical Nougat. Person outside the US can Flash and use it.
Unzip this package and get five file, flash it by Odin.
PS: It is better to flash the pit files. Don't worry, your Network unlocked status will remain same after updates.
mega: https://mega.nz/#!5Z5xwS4Z!WHLOkv-PV..._phjU9mYSHmHL8
By the way, Nougat on S7Active is too slow，I found S7's package in waiting it LoL....
Click to expand...
Click to collapse
Says provided decryption key is invalid.
sashaohio said:
Says provided decryption key is invalid.
Click to expand...
Click to collapse
Please try again....
Will tgis work to update the g930a from the qa4 nougat ota from earlier this year? Or would i have to downgrade to marshmallow first?
logoster said:
Will tgis work to update the g930a from the qa4 nougat ota from earlier this year? Or would i have to downgrade to marshmallow first?
Click to expand...
Click to collapse
backup and you can try. I don't have s7 and just get this package. In fact odin can flash as it can.
logoster said:
Will tgis work to update the g930a from the qa4 nougat ota from earlier this year? Or would i have to downgrade to marshmallow first?
Click to expand...
Click to collapse
It's a full firmware package so yes. You won't keep any of your data though.
Thanks for uploading this @smxwang
It worked for me to upgrade my rooted MM to rooted Nougat, and I used Flashfire to do a backup and restore of data and internal SD and haven't had any issues except that I can't download themes.
I have tried several times to download. I have copied and pasted key and still says I need a key. Can you remove the lock or can someone mirror?
will this allow future OTA update when ATT release them?
it says 'model dismatch fail'
why?
corrado85 said:
it says 'model dismatch fail'
why?
Click to expand...
Click to collapse
Do you have the right files for your model G930A or G935A. Normally that's the issue. Also make sure your using the official Odin when flashing factory firmware.
yes, i have the right files for my G930A, It must be because I'm using OdinPrinceComsy version
corrado85 said:
yes, i have the right files for my G930A, It must be because I'm using OdinPrinceComsy version
Click to expand...
Click to collapse
That would be the problem. Always use official Odin for stock firmware. Only us princecomsy Odin when flashing eng kernel.
it worked. thank you!
under options which should i select if I want full factory wipe (Fresh install)? or does it do automatically
thanks for your help
corrado85 said:
it says 'model dismatch fail'
why?
Click to expand...
Click to collapse
Which Odin are you using? If you use the Prince Comsy Odin you will get that. I accidentally used that version and got that message.
corrado85 said:
it worked. thank you!
under options which should i select if I want full factory wipe (Fresh install)? or does it do automatically
thanks for your help
Click to expand...
Click to collapse
Using Odin, it will wipe automatically. Just install all 4 files and it'll wipe you completely.
Dumb question here, We can flash each file independently. EX: If i wanted to flash just the ap file to replace the eng boot i could do that...
Downloaded file but when extracting I got error message files are corrupted. Any suggestions
Download worked!
DragonMax08 said:
Downloaded file but when extracting I got error message files are corrupted. Any suggestions
Click to expand...
Click to collapse
I just downloaded the file and used it to flash a G930A successully. You should probably just re-download the file.
Thanks for the feedback but I got it to work. Idk but it wasn't extracting on my Mac so I tried on Windows and it worked. Am actually running it now on my phone and everything so far working as it should.
you mention the S7Active there,
does that mean you have the Nougat Odin files for that too ?
and where did you get these images from ? did you get them from their servers ? (somewhere like ? h t t p s://xdmd.sl.attcompute.com/agents/48838/1488/ ??)