Related
Using Flash Tools to Flash TWRP Recovery to A116
Requirements:
TWRP Rewcovery
Flash Tool
A computer
A Micromax A116 (obviously)
Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with TWRP recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Auto Root Installation:-
This version has the built-in Auto-Root feature for non-rooted devices...
Steps :
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
Downloads :
TWRP Rrecovery :
http://d-h.st/IsY
Kernel Sources :
http://yadi.sk/d/fmIOi_ee6ADpi
MT6589 Scatter File :
https://www.dropbox.com/s/p0oc0769t5igt8s/MT6589_Android_scatter_emmc.txt
SP Flsh tools:
http://www.mediafire.com/?7ccl2tw67tklxdk
Drivers:
http://www.mediafire.com/download.php?nv96xclhjmaiclu
64bit drivers:
http://forum.xda-developers.com/showthread.php?t=2206421
TWRP is tested working.
Changelog :
[23/05/2013]
1. TWRP Updated to 2.5.0.0
2. Auto Root Fixed
Credits:
TWRP Tool- yuweng
Testing And Screenshots- Mohammad Abdul Sajid, Vijay
Press Thanks button if I helped!!
Great !!
lol. Installed the newer version of CWM just 5 minutes back. Installing TWRP now. lol. Wish i had seen this post before.
Can anyone make flushable zip to flash it via can recovery...
Sent from my Micromax A116 using Tapatalk 2
Abhiroxx said:
Can anyone make flushable zip to flash it via can recovery...
Sent from my Micromax A116 using Tapatalk 2
Click to expand...
Click to collapse
+1 for this..
Sent from my Micromax A116 using xda app-developers app
reboot problem
hi
i seem to be having some problem rebooting system does it take some time to reboot i waited for some time it did not reboot and then i pulled out the battery and booted the phone kindly advise on the same
thanks in advance:good::laugh:
After installing TWRP recovery successfully........it doesnt happen automatically when i reboot the phone as below.
Then i tried to install the SuperSU and BIN files thru Recovery, and SuperSu can be found in the App drawer. but the Phone is not rooted when i check thru rootchecker. and even Titanium backup or any other app cant work which require root access.
Pls tell me, how to successfully ROOT the phone. Even SuperSU installed, it cant update the binary.
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
kumar abhishek said:
Using Flash Tools to Flash TWRP Recovery to A116
Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with TWRP recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Auto Root Installation:-
This version has the built-in Auto-Root feature for non-rooted devices...
Steps
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
TWRP is tested working.
[/COLOR]
Credits:
TWRP Tool- yuweng
Testing And Screenshots- Mohammad Abdul Sajid, Manoj Nair
Uploading- Kushal Gupta
Press Thanks button if I helped!!
Click to expand...
Click to collapse
peekeje said:
After installing TWRP recovery successfully........it doesnt happen automatically when i reboot the phone as below.
Then i tried to install the SuperSU and BIN files thru Recovery, and SuperSu can be found in the App drawer. but the Phone is not rooted when i check thru rootchecker. and even Titanium backup or any other app cant work which require root access.
Pls tell me, how to successfully ROOT the phone. Even SuperSU installed, it cant update the binary.
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
Click to expand...
Click to collapse
First of all please dont quote whole post.
It has been confirmed that there is some problem with autoroot
Pls follow root procedure posted in cwm thread
Sent from my C6502 using Tapatalk 2
kumar abhishek said:
First of all please dont quote whole post.
It has been confirmed that there is some problem with autoroot
Pls follow root procedure posted in cwm thread
Sent from my C6502 using Tapatalk 2
Click to expand...
Click to collapse
Sorry to quote full.
I tried also the CWM procedure... and flashed both the SU and BIn files. and after reboot, its there in the app drawer. And when i open the SU, and try to update binary also, it fails.
Also, root checker says, Not root access.
can we use mobile uncle tools to flash this......
mohsin2cool said:
can we use mobile uncle tools to flash this......
Click to expand...
Click to collapse
Nope you need SP Flash Tool. Mobile uncle has some problems with mt6589 chipset
Sent from my C6502 using xda premium
Hi,
I guess the screenshots are for TWRP v2.4.2.0.
Thanks!
eagledipesh said:
Hi,
I guess the screenshots are for TWRP v2.4.2.0.
Thanks!
Click to expand...
Click to collapse
Yup i updated TWRP to 2.5 but not the screenshots
Sent from my C6502 using xda premium
kumar abhishek said:
Yup i updated TWRP to 2.5 but not the screenshots
Sent from my C6502 using xda premium
Click to expand...
Click to collapse
Ha ha ha, cool then, i thought its a new thread, what is the major difference if i upgrade?
@kumar abhishek
how were you able to keep the size of this twrp recovery to just within 6mb?.
from what i have checked on the porting tool of yuweng, twrp 2.5.0.0 requires the recovery partition to be adjusted to 7mb?
i am trying to port twrp for the a919i which is similar to the a116 hd.
tia
cant see SD
hi
i flashed the twrp and the root also done thanks
but this does not show the external SD do i need to do any thing to see it
any way i have flashed the SD swap and it is also working fine
thanks again for ur great contribution:good::laugh:
haree said:
hi
i flashed the twrp and the root also done thanks
but this does not show the external SD do i need to do any thing to see it
any way i have flashed the SD swap and it is also working fine
thanks again for ur great contribution:good::laugh:
Click to expand...
Click to collapse
Problem is due to sd swap only
Sent from my C6502 using xda premium
kumar abhishek said:
Problem is due to sd swap only
Sent from my C6502 using xda premium
Click to expand...
Click to collapse
hi
u got me wrong i did the swap after initaly flashing and not seeing the external sd
and the SWAP is working fine now i have 32GB internal storage
thanks...
Upgraded from CWM to TWRP using Mobileuncle tools successfully... thanx
Rooting MediaTek MTK6589 phones without Flash Tools:-
EDIT: Just use Framaroot. Simple. No PC required. http://forum.xda-developers.com/showthread.php?t=2130276. Just install the App and use one of the exploits.
*You can ignore this* OLD METHOD: (use this if you have a lot of time to waste )
Get "Motochopper, developed by djrbliss" for rooting Motorola devices. It works on most devices running Jelly bean 4.1 and above.
Original post (requires logging in) / Thread on XDA / # Alternate Download (Mirror)#
Here's what you need before you Root.
1. Any Phone with MediaTek MTK6589 Processor and Jelly Bean 4.1+
2. Drivers for ADB (connects the pc with the phone through USB Debugging) - there are many sources to get these drivers. If you're running the stock micromax firmware, it's found onboard when you connect the usb. For others running custom firmware, you could download from moulnisky.com. Even windows update might automatically install these drivers for you, but it's time consuming. After you've installed this, proceed to the next step to find out if you've established a proper connection between phone and pc.
3. Connect the phone to PC via USB cable and run the motochopper (run.bat file). press ok. then connect the phone to pc and enable USB debugging from the developer tools. Now the tool should push the exploit and root your phone. if no device is detected, go back to step two and install the correct drivers. if it's done, you're a superuser.
Note: In Android 4.2, Developer Tools will be hidden by default. You'll have to enable it first. For that, Go to Settings > About Phone > Build Number > Tap 7 Times.
Wanna Unroot and go back to Normal user?
SuperSu > Settings > Full Cleanup and Manually Reboot.
Installing Custom Recovery:-
This is a Must-if you have a rooted phone. Install a custom recovery before you start changing any system files. this will come in handy in case you mess up your phone and stuck in bootloop. It is commonly used for installing unofficial firmwares and also for backing up your perfectly working firmware.
To install a Custom Recovery, follow these steps. ( Root permissions needed )
1. Root the phone (refer above).
2. Download Mobileuncle MTK Tools from the Play Store.
. Download a Custom Recovery of your choice and place it on your external SD card without any folders. the recovery image file must have the word recovery in it for the app to detect it. i.e twrprecovery,recovery-twrp,etc.. so whatever sources you get the recovery image from, rename it accordingly.
Clockworkmod and TWRP are the most commonly used custom recoveries. It's up to you to decide which one you're installing. TWRP vs Clockworkmod: Which custom recovery is the best?
TWRP Custom Recovery
Clockworkmod Custom Recovery
3. Now run Mobileuncle Tool. Recovery Update > You'll find the recovery image there. Select and confirm to install. Done.
More info: Backups taken with clockworkmod don't work with twrp. so choose your family wisely.
Re-installing the Stock Recovery:-
If you want to revert to the Stock Recovery at some point due to some reason, HERE is the stock recovery taken from the stock firmware. You can flash it through Mobileuncle just like you flashed custom recovery.
Launching the Phone in Recovery mode:-
Switch off the Phone and wait till it's completely off. Pressing Volume Up + Power will enter the Recovery mode.
Factory Restore:-
Wanna Upgrade to a Newer version of Android ? or Have you just messed up your Phone ? Worry-Not. Here's the solution for all your problems. As the saying goes " A MediaTek Phone can never be Hard-bricked ". It can only be Soft-bricked and then it's easy to resurrect it back from the Dead with SmartPhone Flash Tool.
Here's what you need:
1. Micromax Micromax Canvas HD (I'm not sure if this firmware will work with any variants of this Device.)
2. The Latest Firmware for Micromax Canvas HD: S9201_4.2_MP_F3F8_B1_IN_MMX_14_FLASHER_USER (Android 4.2.1 Jelly Bean, Released on 18-October-2013)
3. Download the latest version of Smart Phone Flash Tools: Download v3.1312.0.139
4. MediaTek PreLoader USB VCOM Port Drivers - (Download) - This is the most important part. If you don't install these drivers, SP Flash Tools will not work.
Note: these aren't the same drivers that comes with the Phone or those Unsigned Drivers provided by many sources. These are signed drivers and works with all versions of Windows (includes 7,8 x64 versions)
How to install: Don't download the first file (it's just an installer). Get the two other files which are the Drivers. Keep them in a folder and extract them. You will have two .inf files. Right click on both of them and install. Simple.
5. After downloading all the required files and installing the drivers, power off your phone completely and remove the USB cable. Now remove the battery from the phone.
6. Extract the zip file containing the micromax firmware to some folder and then run SP Flash Tools. Now select the Scatter-Loading File which is inside the extracted folder named as "MT6589_Android_scatter_emmc". Press Download and connect the USB cable to the phone (without battery). It takes around two minutes to complete. Removing it mid-way will only mess-up the phone. After a Green circle is shown on screen, you can remove the cable and turn on the phone. That's all.
Note: If you're upgrading from Android 4.1 to 4.2, for the first time, You might enter an app called TP Upgrade that will run on the first boot. It's a Nice app. It upgrades your TouchPad drivers to the latest version and will ask for confirmation.but the thing is "DON'T TOUCH ANYTHING ON YOUR SCREEN WHILE IT'S THERE (NOT EVEN THE OK BUTTON)". It will start by it's own and completes in around 5 minutes approximately. If you accidentally touch the screen, your TouchPad will stop working. Now, Don't Panic. Welcome to the League. Now remove the battery from the phone and restart. You should see the same TP Upgrade coming up again. Have some snacks and don't do what you did last time. It'll be fine.
Credits:-
djrbliss for motochopper
suhas.holla for the clockworkmod recovery
kumar abhishek for the twrp recovery port.
www.moulnisky.com
Don't forget to hit that thank button.
Its works
salaigeethan666 said:
I just found out the simplest method to root the Micromax A116 Canvas HD.
This method is not yet popular among many Canvas HD users. But this one works without the need for any custom recovery. So you don't have to go through those complex procedures trying to install usb drivers for your device or removing the battery and connecting the usb. I tested this method and it works flawlessly.
Here is the link to the site that provided it.
(add http here)droidchina.com/forum/Thread-Rooting-MT6589-HDC-Galaxy-Android
(I can't post outside links because I'm new)
Click to expand...
Click to collapse
This worksss....man....thank you.So easy.Installed drivers connected the phone and ran the bat file and done.Even checked via root checker.
Its rooted but u can access the recovery options
Sent from my Micromax A116 using Tapatalk 2
shub_hi said:
Its rooted but u can access the recovery options
Sent from my Micromax A116 using Tapatalk 2
Click to expand...
Click to collapse
Yea. I'm trying to install Clockworkmod too.
I tried pushing the recovery through Adb. but it failed.
i'll have to find some other way to install.
salaigeethan666 said:
Yea. I'm trying to install Clockworkmod too.
I tried pushing the recovery through Adb. but it failed too.
i'll have to find some other way to install.
Click to expand...
Click to collapse
Yah.....need to inst CWM recovery as we cant access the stock recovery
this is what I get when I try to install in through terminal emulator.
Code:
>su
>flash_image recovery /sdcard/recovery.img
>error scanning partitions: Invalid argument
Even the video in YouTube uploaded by cursed4eva.com....that process don't work too.
Sent from my Micromax A116 using Tapatalk 2
salaigeethan666 said:
I just found out the simplest method to root the Micromax A116 Canvas HD.
This method is not yet popular among many Canvas HD users. But this one works without the need for any custom recovery. So you don't have to go through those complex procedures trying to install usb drivers for your device or removing the battery and connecting the usb. I tested this method and it works flawlessly.
Here is the link to the site that provided it.
(add http here)droidchina.com/forum/Thread-Rooting-MT6589-HDC-Galaxy-Android
(I can't post outside links because I'm new)
Click to expand...
Click to collapse
how to unroot it back
How to Unroot?
Mahisasur said:
how to unroot it back
Click to expand...
Click to collapse
SuperSu > Settings > Full Cleanup
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
salaigeethan666 said:
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
guys need and conformation from you all....before rooting and installing CWM, i mean to say when u first baut the fone......did you got the access to recovery? I have an peculier prob from the 1st day.....i could enter recovery but could not select any options.just below the recovery i a picture of a green bot is placed with keybord sign and above that bot there is a exclamation mark in a triangle. Please suggest.
Click to expand...
Click to collapse
what if i dont install custom recovery after rooting
salaigeethan666 said:
SuperSu > Settings > Full Cleanup
It works. I ran Root Checker afterwards to confirm it.
Click to expand...
Click to collapse
what if i dont install custom recovery after rooting. is this necessary to install cwm and what it actually does.
i am new to this android rooting thing. but i want to swap storage of my canvas hd to play hd games... please help me.
Re: Micromax Canvas HD A116 [Rooting without a Custom Recovery + Installing Recovery]
shub_hi said:
salaigeethan666 said:
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
guys need and conformation from you all....before rooting and installing CWM, i mean to say when u first baut the fone......did you got the access to recovery? I have an peculier prob from the 1st day.....i could enter recovery but could not select any options.just below the recovery i a picture of a green bot is placed with keybord sign and above that bot there is a exclamation mark in a triangle. Please suggest.
Click to expand...
Click to collapse
No. I see what you are talking about. The stock recovery will not work in Canvas HD. Everyone has that problem.
Mahisasur said:
what if i dont install custom recovery after rooting. is this necessary to install cwm and what it actually does.
i am new to this android rooting thing. but i want to swap storage of my canvas hd to play hd games... please help me.
Click to expand...
Click to collapse
It's not necessary. You should install it only if you love to flash custom ROMs (Customized Android versions) to your phone. You can flash unofficial android versions to your phone with it. It also allows you to make a backup of your stock ROM which you can't with the stock recovery. You should always make a backup of your stock android to make sure you can always reset your phone back to normal whenever something bad happens (that is if you brick your phone trying to install a ROM).
If you only looking for swapping the memory cards, root is more than enough. Look at this Guide for instructions.
http://forum.xda-developers.com/showthread.php?t=1991583
Thanks i appreciate your help.
Sent from my Micromax A116 using xda app-developers app
Its workssssss
salaigeethan666 said:
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
The link provided above just worked flawlessly.......awesome....thank you both
Worked like a charm
worked perfectly normal like mentioned. Actually, i had successfully installed CWM, but after installing superuser zip files via CWM my phone got stuck in bootloop mode. Had to restore the stock ROM and then installed CWM again, After that tried your method and it worked. Proud owner if rooted A116 now Thank you for sharing the info!
hd rooted
thanks man its works for me a lot.....
finally my canvas hd rooted yo
i swap memory by this method
Default camera app needed
Can someone please upload the default camera app of Micromax a116?
I think I deleted it accidentally... :crying:
P.s. - Im using stock rom with NO modifications except root and CWM
I deleted the video player app and gallery app, maybe that was bundled with the camera app :-/
thank you
salaigeethan666 said:
Root Micromax Canvas HD A116
(without installing Custom Recovery)
Most Guides talk about using SP Flashing Tools to flash the Custom recovery and then rooting the phone. But Here we root the phone first and then install Custom recovery. This method is much easier. You don't have to install any Custom recovery to root your Canvas HD. Which means, you don't have to go through those complex procedures trying to install usb drivers for your device or removing the battery and connecting the usb. I used Motochopper by djrbliss to root my Canvas HD. I didn't face any problem. so it works. Here is the link
http://hdcgalaxy.com/2013/04/root-tutorial-hdc-galaxy-android-mt6589.html
How to Unroot?
SuperSu > Settings > Full Cleanup and Manually Reboot. It will be gone. I tried it and works.
Credits:-
djrbliss for making motochopper - Original link
Install Custom Recovery after rooting
Download "Mobile Uncle Mtk Tools" from the Play Store and use it's Recovery Update feature to install Custom Recovery directly from your mobile. For more details, follow instructions here
Tips and Tricks:-
How to Swap internal and external Memory Card - link
Although your phone is powerful enough to run high definition games, the manufacturer has provided little space to install any such games. Your internal memory of 2Gb storage fills up as soon as you install something like Need for Speed Most wanted. So the first thing you must do after rooting the phone is swapping the memory cards. Insert a 16Gb external memory card and use this trick to transform the external memory card into internal memory. Now you can have six hd games at the same time on your phone
Installing Adobe Flash Player - (Download Apk/View Source)
Hit Thanks if i helped you
Click to expand...
Click to collapse
thanks a million man , was able to root my canvas with this method, with your guidance ofcourse, moborobo installed the necessary drivers, and motochoper worked as a charm....... thanks again man...... cheers
Stuck in stock recovery
Problem i have is the stock recovery sucks i cant enter any option by pressing both keys right context menu + back key simultaneously
nothing happens and the method from cursed4eva works for me does any one know how to select the highlighted option in stock recovery ? because i am stuck
Ok I am posting a simple tutorial to Root your Canvas HD and flash Custom Recovery without using SP Flash Tool. Sometimes it is very difficult for newbies to get proper driver and correct version of SP flash tool. Some users scared to use SP Flash Tool. So here is the solution.
Requirements:
1. Canvas HD of course
2. Framaroot application
3. Root Checker to check if your device is Rooted or not.
4. CWM v6.0.3.3 OR CWM v6.0.3.0 OR TWRP v2.5.0.0 or TWRP v2.6.3.0 or CWM v6.0.4.0 (Touch Based) or CWM v6.0.4.0
5. MobileUncle MTK Tools v2.9.8
Procedure:
1. Download the Framaroot application form the above link and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Now go to Play Store and search for Super User and install it after opening it might ask to update SU.bin, hit yes and then "Normal"
6. Reboot your Device.
7. Check with Root Checker, if your device is rooted or not.
8. If it is rooted, download MobileUncle and install it, remember it require root access to work properly.
9. Now download any custom Recovery i.e. CWM or TWRP from the above link and rename it to recovery.img and place it in the root of SD card.
10. Now open MobileUncle and tap on Update Recovery it will automatically search the img file, you just have to select and confirm it. Then it will ask to boot your device into custom recovery tap on yes.
11. Your device would be booted into custom recovery.
Congrats your device is now rooted and flashed with Custom Recovery, now you can flash any custom ROM and now you have full control over your device.
How to Full Unroot and flash stock Recovery:
1. Download this stock Recovery file.
2. Rename the file to Recovery.img and place it in the root of SD Card.
3. Now open MobileUncle and tap on Recovery Update, it will search the file by itself, you just have to select the file and confirm.
4. It will then ask whether you want to boot into recovery, if you want to confirm you can tap on yes otherwise its not required.
5. Now open SuperSU and go to settings, scroll down to Full Unroot and tap on it. The process would be finished within 1 or 2 secs now you are on Stock v4.2.1 that too unrooted.
Now your warranty is intact you can go to service center for any help from them
Very Important: I am just trying to help you guys, I am not responsible for anything that might go wrong, follow this tutorial at your own risk.
this method works for sure ...right???
coz i have a friend who wants to root his new HD and we are on a trip with no computers....So....
it's working right...
adi_sat123 said:
this method works for sure ...right???
coz i have a friend who wants to root his new HD and we are on a trip with no computers....So....
it's working right...
Click to expand...
Click to collapse
I have first tried it then I have posted this tutorial, you can try it by yourself.
Works 100% for me on my Mobistel Cynus T5..Thanks...
working like a champ thanks:good:
nice_guy75 said:
Ok I am posting a simple tutorial to Root your Canvas HD and flash Custom Recovery without using SP Flash Tool. Sometimes it is very difficult for newbies to get proper driver and correct version of SP flash tool. Some users scared to use SP Flash Tool. So here is the solution.
Requirements:
1. Canvas HD of course
2. Framaroot application
3. Root Checker to check if your device is Rooted or not.
4. CWM v6.0.3.3 OR CWM v6.0.3.0 OR TWRP v2.5.0.0
5. MobileUncle MTK Tools v2.9.3
Procedure:
1. Download the Framaroot application form the above link and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Reboot your Device.
5. Check with Root Checker, if your device is rooted or not.
6. If it is rooted, download MobileUncle and install it, remember it require root access to work properly.
7. Now download any custom Recovery i.e. CWM or TWRP from the above link and rename it to recovery.img and place it in the root of SD card.
8. Now open MobileUncle and tap on Update Recovery it will automatically search the img file, you just have to select and confirm it. Then it will ask to boot your device into custom recovery tap on yes.
9. Your device would be booted into custom recovery.
Congrats your device is now rooted and flashed with Custom Recovery, now you can flash any custom ROM and now you have full control over your device.
How to Full Unroot and flash stock Recovery:
1. Download this stock Recovery file.
2. Rename the file to Recovery.img and place it in the root of SD Card.
3. Now open MobileUncle and tap on Recovery Update, it will search the file by itself, you just have to select the file and confirm.
4. It will then ask whether you want to boot into recovery, if you want to confirm you can tap on yes otherwise its not required.
5. Now open SuperSU and go to settings, scroll down to Full Unroot and tap on it. The process would be finished within 1 or 2 secs now you are on Stock v4.2.1 that too unrooted.
Now your warranty is intact you can go to service center for any help from them
Note: It will install SuperSU v1.34 but v1.51 is also released, so you can upgrade your SuperSU by flashing the zip via custom recovery.
Very Important: I am just trying to help you guys, I am not responsible for anything that might go wrong, follow this tutorial at your own risk.
Click to expand...
Click to collapse
Will this trick work on Canvas 2 too..??
Thank you.....
It works!!!!
Thank you OP....
abhishekjain.ims said:
Will this trick work on Canvas 2 too..??
Click to expand...
Click to collapse
I don't have Canvas 2 so I cant tell you. Frameroot should work on Canvas 2 as well but not sure about recovery.img.
nice_guy75 said:
I don't have Canvas 2 so I cant tell you. Frameroot should work on Canvas 2 as well but not sure about recovery.img.
Click to expand...
Click to collapse
Ok...it did..1 of my friend successfully completed this trick..thanks :victory:
niceaf5 said:
I have first tried it then I have posted this tutorial, you can try it by yourself.
Click to expand...
Click to collapse
What to do after 9th step....after selectng image nd confirming it...phone goes into
Recovero...blak screeb appears with some points written on it...
Thn it will reboot automatically or i hav to manually select reeboot optiob by pressing volume keys nd thn pressing power button fr trbooting....m i right ...??
Sunny37886 said:
What to do after 9th step....after selectng image nd confirming it...phone goes into
Recovero...blak screeb appears with some points written on it...
Thn it will reboot automatically or i hav to manually select reeboot optiob by pressing volume keys nd thn pressing power button fr trbooting....m i right ...??
Click to expand...
Click to collapse
Tell me what points are written on it?
nice_guy75 said:
Tell me what points are written on it?
Click to expand...
Click to collapse
5-6 point..dont remembr properly..i selected reboot
1st was reeboot
Advanced
Cache_______
Prtition
Dnt remembr properly...
Btw Root checkr shows device rooted..
Sunny37886 said:
5-6 point..dont remembr properly..i selected reboot
1st was reeboot
Advanced
Cache_______
Prtition
Dnt remembr properly...
Btw Root checkr shows device rooted..
Click to expand...
Click to collapse
Ok, got it you are rooted and flashed with CWM.
cam is not working
My front cam is not working...
Shows a white screen..
I am having hard time unrooting my phone..
I guess i need to contact service center but i need to unroot it first as the cams were working fine before root..
Pls help.
sunny041 said:
My front cam is not working...
Shows a white screen..
I am having hard time unrooting my phone..
I guess i need to contact service center but i need to unroot it first as the cams were working fine before root..
Pls help.
Click to expand...
Click to collapse
Everything is explained in the tutorial then also you are unable to unroot?
nice_guy75 said:
Everything is explained in the tutorial then also you are unable to unroot?
Click to expand...
Click to collapse
I did it...
But the phone is not looking the way i should be means all the changes i hade done in the phone are still there and version is 4.1.2 only..
sunny041 said:
I did it...
But the phone is not looking the way i should be means all the changes i hade done in the phone are still there and version is 4.1.2 only..
Click to expand...
Click to collapse
What kind of changes are you talking about? If you are talking about the changes which you have made through Gravity Box and other modules of Xposed framework then you should just uninstall the Xposed Framework.
nice_guy75 said:
What kind of changes are you talking about? If you are talking about the changes which you have made through Gravity Box and other modules of Xposed framework then you should just uninstall the Xposed Framework.
Click to expand...
Click to collapse
Ty buddy...
It looks like before now....
Now pls tell me do i really need to take it to the service center or there is some way to fix the camera problem...
No bugs works like a charm finished rooting and installing cwm in 5 Minutes amazing!!
Sent from my Micromax A116 using xda premium
sunny041 said:
Ty buddy...
It looks like before now....
Now pls tell me do i really need to take it to the service center or there is some way to fix the camera problem...
Click to expand...
Click to collapse
I would suggest you to go to Service centre only.
You should already be rooted and have CWM recovery installed if not then see my guide on how to install them:
Link: http://forum.xda-developers.com/showthread.php?t=2460679
In case you want to take your device to the customer care then you should UNROOT and flash stock recovery or else you're warranty is void.
Hope you understand what i say.[/B]
Requirements:
1) Rooted CHD.
2) Mobile uncle tools:
Link: https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en
3) Stock recovery image:
Link: https://www.dropbox.com/s/kykt6o4cm5sb1ot/Stock recovery.img
Sources and thanks:
1) Thanks to developer of mobile uncle tools.
2) Thanks to XDA
3) Thanks to MMX for a beautiful phone.
4) Sources from xda and a bit form google.
Replacing stock recovery:
1. Place the stock recovery image in the root of SD Card and rename it to recovery.img .
2. Now install Mobile uncle tools.
3. Now open MobileUncle and tap on Recovery Update, it will search the file by itself, you just have to select the file and confirm.
4. It will then ask whether you want to boot into recovery, if you want to confirm you can tap on yes otherwise its not required.
You've now successfully replaced stock recovery.
UNROOTING:
1.Open SuperSU and go to settings, scroll down to Full Unroot and tap on it. The process would be finished within 1 or 2 secs now you have a unrooted device.
Yes ready to be taken to customer care!!!!!!
Now your warranty is intact you can go to service center for any help from them.
Hit THANKS if i've helped you.
hy ... i rooted my phone (canvas hd a116) . i accidentally deleted some system app. now i cant install any app from anywhere. every time i try to install any app its showing app not installed. what to do? please help..
thanks in advance
How To Root And install Custom Recovery { I already used many one click root softwares like kingroot,iroot, framaroot and etc } Plz Help Me
There is no way to root micromax e455 until now
Sent from my Micromax E455 using XDA Free mobile app
I have rooted micromax e455 (Nitro 4G) through kingroot, but i was not able to go to recovery mode, used sp flash tool, now working fine
emhashmi said:
How To Root And install Custom Recovery { I already used many one click root softwares like kingroot,iroot, framaroot and etc } Plz Help Me
Click to expand...
Click to collapse
Though i am not an expert android developer but i have found a way to root this phone. I have not yet been able to find custom recovery (TWRP or CWM) for this phone yet.
Anyways the procedure of rooting is given below. I have tested this on my own phone but cannot guarantee that it will work on your phone also. Use it at your own risk and do not blame me if you make your phone a brick or paper weight!
1. Download Mi4i Toolkit from here:
http://forum.xda-developers.com/mi-4i/development/tool-mi-toolkit-v4-root-twrp-stock-t3170607
2. Enable Developer Options in the phone (Go to Settings and press version 7 times in "About Phone") and then in Developer Options will appear under setting.
3. In developer options enable USB debugging.
3. Extract the toolkit ZIP wherever you like, but keeping all files in same folder.
4. Download and install drivers from micromax website.
5. Connect your phone to the PC.
6. Run the Start.bat file and select option no.1. The phone will automatically reboot and you will find superuser.apk in app drawer.
Warning>>>> Do not select option no.2 (Custom reovery....) or 5 (Stock recovery......) as the same will brick this device.
These posted by sandss. I don't know it work for you or not
Can you pleases compile twrp gor this mobiles