[I]Root twrp for bluboo Edge-
Disclaimer-
Code:
1. Do always on own Risk i am not responsible for bootloop and damage
2. take a backup before flashing supersu,
3. follow steps correctly
How to Install twrp-
Run Sp flash tool
Load Scatter, Check recovery only
Load twrp under recovery Section, click download,
Connect your Phone to PC [ make sure phone is switched off]
Fastboot-
put recovery in adb folder
use command-
Code:
fastboot oem unlock
fastboot flash recovery [file name here][file format here]
ex, fastboot flash recovery twrp.img
Root-
flash supersu.zip [2.79] via twrp
twrp Bug-
adb shell not work
Credit-
unknown
me to share with you
Downloads-
mod edit - link removed
After flashing twrp with sp flash tools, i am not able to enter into recovery, however i push volume up + power buttons... Phone keeps booting into normal android mode instead.
USB Vcom driver successfully installed, and spflash tool seems to work fine. Any ideas?
After flashing:
reboot with vol-down and power in that "chinese recovery thing" (look like this http://visihow.com/images/9/99/Samsung-chinese-factory-reset.png )
then connect phone with pc and reboot with adb in "real" recovery (adb reboot recovery)
if you boot normal first, recovery gets overwritten by default recovery
I boot into bootloader by pressing home button + power
adb reboot recovery
Dont boot to twrp
I flashing recovery, but I dont boot to twrp. Which version twrp you used?
Related
hi
I have sony ericsson neo v(MT15i) with unlocked bootloader
my phone is locked with password and I do not know the password.(I need my contacts and other data) , adb debug is not active
I want to install cwm via fastboot , then I will be able to install aroma file manager and I will be able to delete "password.key' and "gesture.key"
if you have adb and fastboot in your pc the only way i can help is this:unzip recoveryneo.zip and get recoveryneo.img.put it in androidsdk/tools.(you must have fastboot there too).then in terminal type:
Code:
fastboot devices (you must see the SN of your device)
fastboot boot recoveryNeo.img
after finish
fastboot reboot
this will not install cwm on your phone.this will just boot in recovery without install it.after you reboot there is no recovery.
i use Vol Down+Menu+Power buttons to go bootloader mode but it can't go to bootloader and its normal boot then i try with adb reboot bootloader command in pc.it boot in fastboot mode then i flash recovery by fastboot flash recovery recovery.img then error show on mobile and pc cmd partition recovery not support flash but how can i install custom recovery please help me
Note : odin not detected my device in any mode
thanks in advance:good:
For Odin to detect the Phone, it needs drivers.
http://forum.xda-developers.com/showthread.php?t=961956
make sure you didnt flash any CWM on new 8552 devices, seems a common mistake around
Hello
A newbie here ...
My new phone "Lenovo Vibe C (A2020)" does not allow me to install any kind of custom recovery on it, I tried the following methods ...
1- SP Flash Tool: doesn't detect my phone at all, even after installing all drivers (Qualcomm, MTK, Etc ,,, ).
2- Adb and fastboot: whenever I try to flash a recovery, it only shows (waiting for a device) command, even after being detected by "adb devices" command, and showing device ID.
3- flashing apps: I used flashify and thrasher, at the beginning they both show a successful flashing process, up until rebooting to recovery, then only shows "Lenovo" logo for a second right before turning the phone off.
that's what i did, any help would be appreciated.
Note: the phone isn't even indexed in the site's database ... I wonder why!
You should unlock the bootloader first after rooting your device
Hello there. I do hope that you can still boot your device normally. If you can, please do make a backup of your rom.
(a) Download and install the latest driver for your device
(b) Download the latest adb and fastboot tool (I recommend Minimal ADB and Fastboot)
(c) Download the custom recovery image. Save/copy it on the root directory of your ADB and Fastboot folder.
(d) In your device, go to settings > developer > enable oem unlocking and usb debugging (which is I guess you already did).
(e) Now open your terminal/cmd: adb reboot bootloader (this will boot your device in fastboot)
(f) In terminal/cmd: fastboot oem unlock (or fastboot oem unlock-go)
(g) Now flash the custom recovery: fastboot flash recovery "recovery.img"
***I suggest you try first if the custom recovery image works: fastboot boot recovery.img
(h) Reboot into recovery and check if it works.
Ospider said:
Hello
A newbie here ...
My new phone "Lenovo Vibe C (A2020)" does not allow me to install any kind of custom recovery on it, I tried the following methods ...
1- SP Flash Tool: doesn't detect my phone at all, even after installing all drivers (Qualcomm, MTK, Etc ,,, ).
2- Adb and fastboot: whenever I try to flash a recovery, it only shows (waiting for a device) command, even after being detected by "adb devices" command, and showing device ID.
3- flashing apps: I used flashify and thrasher, at the beginning they both show a successful flashing process, up until rebooting to recovery, then only shows "Lenovo" logo for a second right before turning the phone off.
that's what i did, any help would be appreciated.
Note: the phone isn't even indexed in the site's database ... I wonder why!
Click to expand...
Click to collapse
Check my thread for custom marshmallow rom and twrp recovery .
https://forum.xda-developers.com/android/general/bliss-rom-lenovo-vibe-c-a2020a40-t3567812
rolland.arriza said:
Hello there. I do hope that you can still boot your device normally. If you can, please do make a backup of your rom.
(a) Download and install the latest driver for your device
(b) Download the latest adb and fastboot tool (I recommend Minimal ADB and Fastboot)
(c) Download the custom recovery image. Save/copy it on the root directory of your ADB and Fastboot folder.
(d) In your device, go to settings > developer > enable oem unlocking and usb debugging (which is I guess you already did).
(e) Now open your terminal/cmd: adb reboot bootloader (this will boot your device in fastboot)
(f) In terminal/cmd: fastboot oem unlock (or fastboot oem unlock-go)
(g) Now flash the custom recovery: fastboot flash recovery "recovery.img"
***I suggest you try first if the custom recovery image works: fastboot boot recovery.img
(h) Reboot into recovery and check if it works.
Click to expand...
Click to collapse
But how about a person WITHOUT PC? Including me.
I am having a REAL BUGGER of a time with my Xiaomi Redmi Note 3 Pro (Snapdragon)!
1. It is not recognized by ADB in Fastboot mode.
2. I suspect it shipped wit a vendor ROM, and I'm trying to flash latest Official MIUI Global Dev (Marshmallow) ROM, but I keep getting errors in MI Flash (screenshot attached).
3. I want to Flash TWRP, BUT ADB isn't working, AND I cannot get to the download page for the cracked bootloader.
4. Seriously considering Resurrection Remix ROM, instead, but most of the above issues still apply.
I am NOT new to custom recoveries, flashing ROMS, ADB etc, BUT I am dealing with a new PC (Windows 10 Home, 64 bit, like my old (dead) laptop), and I'm new to this device.
PLEASE HELP. (Quite frustrated)
Fastboot won't recognize adb commands you have to use fastboot.
What you can try is booting into emergency download mode and using my flash to flash it from there. I think it's " adb reboot edl" while the device is on with USB debugging or using the mi updater app ( tap the three dots I think).
I think that this is not the correct section for your question, and i dont know the procedure that you follow but try to follow this procedure:
-Connect the phone at pc with USB cable
-Make sure that debug mode and OEM unlock was abilitate in dev settings
-Copy twrp.img in adb folder
-Shut down the phone and press power botton and - vol buttons for enter in fastboot mode
-Run this commands by terminal open in adb folder
fastboot devices
-If fastboot recognize correctly the device run this command
fastboot fash recovery nameoftwrp.img
-After reboot the device with this command
fastboot reboot
When the phone reboot press immediatily vol + for enter in twrp
Good luck
GOT IT! FINALLY!
-I finally got ADB to connect, and was able to enter EDL through ADB.
-Re-downloaded ROM from web.
-Re-extracted.
-FLASHED SUCCESSFULLY!
-SETUP COMPLETED SUCCESSFULLY!
-YAY!
(I think the original download was corrupted, somehow.)
I was trying to flash TWRP in Gionee P5W. The steps I followed were:
1. adb reboot bootloader
2. fastboot oem unlock
3. fastboot flash recovery recovery.img (had prepared TWRP img file already)
4. fastboot reboot recovery
I later found out that the last command should had been fastboot boot recovery.img.
Now my phone is stuck in bootloop. I tried going into recovery (vol-up + power) but I only gat the gionee logo and then the boot loop. What is the condition with my phone and is there something that can be done?