iam using galaxy s2 i9100g when i was trying to do flash using odin i download firmware from sammobile and extract the files and two files come up .pit file and pda ...and then i open odin and select both files and start flashing and odin pushes message failed ...and my phone is not going into download mode and recovery mode and pushed message "firmware upgrade encountered an issue"....iam so panic and confused how to fix this problem somewhere i read to fix problem using kies emergency recovery but it didnt work for me and asking me source code and i dont know ...iam hopeless and very terrified ,,,pls guys help me to fix my problem i shall be very thankful for yoy for that ...
humzagr8 said:
iam using galaxy s2 i9100g when i was trying to do flash using odin i download firmware from sammobile and extract the files and two files come up .pit file and pda ...and then i open odin and select both files and start flashing and odin pushes message failed ...and my phone is not going into download mode and recovery mode and pushed message "firmware upgrade encountered an issue"....iam so panic and confused how to fix this problem somewhere i read to fix problem using kies emergency recovery but it didnt work for me and asking me source code and i dont know ...iam hopeless and very terrified ,,,pls guys help me to fix my problem i shall be very thankful for yoy for that ...
Click to expand...
Click to collapse
u need not flash pit for upgradin ur rom using odin
pit is used incase of corrupton and for recovery
... try gettin into download mode
if u cant get into download
buy a usb jig from ebay it will take u to download mode
once u in download mode flash only ur rom ...
and chk
u can also make a usb jig
youtube it u can fin videos to do it
neerajganga said:
u need not flash pit for upgradin ur rom using odin
pit is used incase of corrupton and for recovery
... try gettin into download mode
if u cant get into download
buy a usb jig from ebay it will take u to download mode
once u in download mode flash only ur rom ...
and chk
u can also make a usb jig
youtube it u can fin videos to do it
Click to expand...
Click to collapse
You should try to go into recovery mode. From there, try to factory reset
Sent from my GT-I9100 using Tapatalk 2
is there any more ways to enter recovery mode from "firmware upgrade encountered an issue galaxy s2" iam so dead ....and i dont have money to buy usb jig now so help me !!!
humzagr8 said:
is there any more ways to enter recovery mode from "firmware upgrade encountered an issue galaxy s2" iam so dead ....and i dont have money to buy usb jig now so help me !!!
Click to expand...
Click to collapse
well it cost hardly a $ or 2
if u cant
then try lending 1 search some 1 near ur place here
http://forum.xda-developers.com/showthread.php?t=1495867&page=35
or make a usb jig urself .
Some one reported this:
Plug a standard usb cable while pressing vol down. It will enter download mode. Not tested by me, but you loose nothing to try and tell us if it works
Sent from my GT-I9100 using Tapatalk 2
omg thanks so much i managed to get in to download mode
How to solve that
I have an S2 Hercules T989... I tried upgrading it from 2.3.6 to 4.0 but when I flashed with Odin 3.18 it gave me that error message.
I have tried four or five times reflashing it, rebooting to download mode but still it stayed like that for 1 1/2 hours...
So, I got to visit another site, I couldnt remember that actually, but it talked about on how to upgrade S3 to latest version.
There, I downloaded the latest version of Odin, too, that's v4 I think, and when I tried again (first time with that version), it worked!
You don't need to actually redownload the file, but instead, try other odin versions, recommended to download and use the latest one coz it will be the safest way to upgrade your galaxy device. Hope this helps.
Staff nice day
I have a Galaxy GT-I9305T this week upgraded it to 4.1.2 jelly bean was running everything normal poren tried to make root with CF-Root-v6.4-SGS3 he made a mistake and did not root, but when the device restart was no sign of the operator, gave a searched on the net I found people saying it could be that the file was damaged IMEI did another pot root file CF-Root-Auto-m3-gti9305t.tar worked m3dv-installed the Root Explorer 2.20.1 I checked the folder efs, unfortunately I have no backup of it, is she recovers? if you like I do? and the IMEI is to recover?
Is your IMEI the same as under the battery ??
If not flash stock rom with Odin .
Still wrong IMEI take to Samsung service dont bother reading the ten million exact same posts .
I9305 question and answers forum for your phone .
jje
staff did a procedure that a friend posted on another Foum and now the machine operator's fate with this however if you try to make a connection he says he is not registered on the network, and when I type * # 06 # IMEI he brings me the 0/00 what I did was the procadimento
Retrieving IMEI and data connection after flashing package root WRONG I9305 Intended for:
Make sure you have the Samsung Kies or Samsung USB Driver installed on your PC.
Download and extract: Odin3 3.04.zip for your PC, if you have not already.
Download and extract: Param_Bin_I9305.zip for your PC.
With the phone turned off, press and hold: + 'Volume Down' HOME '+' POWER 'to enter Download Mode.
Connect your phone to PC via USB cable and start Odin.
Make sure your phone is connected to see if a COM port in a blue box is present in ID: COM.
Press the "PDA" and select the "Param_Bin_I9305.tar.md5 'file that you extracted the ZIP file before.
Press the 'Start' button and wait for it to finish flashing. If successful, you will see a green box with "PASS!".
Wait for your phone to reboot then go to the Dialer and press: * # 06 #. You should now see your IMEI and your data connection will be back.
Hi im stock on samsumg logo GT I9300 . I also have problem whith imei after flashing Roms. I installet stock rom whith odin but nothing. When i go to recover it says Missing efs. Where can i find this file to flash whith odin for GT I9300?.? Thnx
Enea307 said:
Hi im stock on samsumg logo GT I9300 . I also have problem whith imei after flashing Roms. I installet stock rom whith odin but nothing. When i go to recover it says Missing efs. Where can i find this file to flash whith odin for GT I9300?.? Thnx
Click to expand...
Click to collapse
you find the file on your phone - only if you backed it up!
I havent . Thnx
Sent from my Vodafone Smart II using xda app-developers app
Request DL Link
JJEgan said:
Is your IMEI the same as under the battery ??
If not flash stock rom with Odin .
Still wrong IMEI take to Samsung service dont bother reading the ten million exact same posts .
I9305 question and answers forum for your phone .
jje
Click to expand...
Click to collapse
My Dear ,
Where Can I get Dl Link For The MD5 File U explained.... ???
sammobile
Hello all
First of all i did rooting on my phone and this is not the problem . then i installed pac-man kitkat 4.4.2 rom on my phone . i erased the old operating system and didn't do a backup . now i am unhappy with this kitkat and want my phone bk like originally . this kitkat doesn't applying any of the sensors on phone . its like a lot of options just gone . and now am searching for the original rom to install and cant find :crying: :crying: :crying: plz tell me what to do . my phone is galaxy S4 gt-i9500
turkman97 said:
Hello all
First of all i did rooting on my phone and this is not the problem . then i installed pac-man kitkat 4.4.2 rom on my phone . i erased the old operating system and didn't do a backup . now i am unhappy with this kitkat and want my phone bk like originally . this kitkat doesn't applying any of the sensors on phone . its like a lot of options just gone . and now am searching for the original rom to install and cant find :crying: :crying: :crying: plz tell me what to do . my phone is galaxy S4 gt-i9500
Click to expand...
Click to collapse
You can download the latest firmware for your Galaxy S4 (GT-I9500) from here, just make sure to change the country box to the country that is correct for your service provider. Once you have downloaded the firmware image you can use Odin and download mode on your phone to flash the firmware. To put your phone into download mode power off the device, then turn on the device holding the volume down button + home button + power button simultaneously, follow the onscreen prompts to put the phone in download mode. You will need Odin to flash the firmware to your device which can be obtained from here. I would recommend watching this tutorial video on how to flash the firmware to your device using Odin (Also make sure you have the USB drivers for your phone installed correctly on your computer or Odin won't recognize your device). Let me know if you still have questions I'll be happy to help you out.
shimp208 said:
You can download the latest firmware for your Galaxy S4 (GT-I9500) from here, just make sure to change the country box to the country that is correct for your service provider. Once you have downloaded the firmware image you can use Odin and download mode on your phone to flash the firmware. To put your phone into download mode power off the device, then turn on the device holding the volume down button + home button + power button simultaneously, follow the onscreen prompts to put the phone in download mode. You will need Odin to flash the firmware to your device which can be obtained from here. I would recommend watching this tutorial video on how to flash the firmware to your device using Odin (Also make sure you have the USB drivers for your phone installed correctly on your computer or Odin won't recognize your device). Let me know if you still have questions I'll be happy to help you out.
Click to expand...
Click to collapse
thank u for the quick replay and for this website ill follow your instructions and tell you what happened with me
am sorry but i cant find my correct country/provider at all so wt will happen if i download another firmware with another country ???
turkman97 said:
am sorry but i cant find my correct country/provider at all so wt will happen if i download another firmware with another country ???
Click to expand...
Click to collapse
Which country/provider are you looking for? I would suggest taking a look at this article, additionally I would take a look at this thread for instructions on what to do in your case. If you still have questions please let me know.
S6 edge stuck on opening logo of "Samsung galaxy S6 edge" - it's not mine, so I can't know the history that caused it - but I think it's related to a bad try of rooting.
when trying to flash a new stock firmware from Sammobile getting the same problem - even after wipe and wipe cache.
on recovery getting this messege on the bottom:
dm-verity vertification failed... need to check DRK first...
this is what I tried to do to fix it:
1) flashed newest stock - still no do.
2) tried to flash with smart switch - it did flash - but it didn't help - phone still in bootloop.
3) flashed S6-UniKernel_v6-0001-ODIN or S6-UniBase_BOG8_v2 - it did helped, the phone worked, but I lost the IMEI and needed a certificate to fix the IMEI, I did it and the phone works fine..... BUT I can't left it with a custom rom 'cause I want the original updates and the original stock rom.
4) tried to flash the repair firmware G925FXXU1AOCV (comes with 4 files CSC, AP, MODEM and BOOTLOADER) which is 5.0.1, so it fails (tried also with pit file) - didn't do.
5) last thing I'm willing to try - is to split a new firmware to CSC MODEM BOOTLOADER and AP by myself... the only problem is - I don't actually know how to do it.
another thing I've noticed on the download mode it is written:
Current Binary: samsung Official and System status: custom
I was wonder if someone can give me a clue what to do, and how to fix this problem.
thanks!
What country are you from? Are you sure the phone isn't on 5.1.1??
Download the firmware from sammobile of your own country or the nearest country/countries, put the device in Odin mode and try to flash that one through Odin "AP" Okay "IF IT FAILS" (copy the Odin log and paste it on this thread. If it succeeds LET US KNOW PLEASE.
Be sure of the Android version.. If that's impossible my safe bet is to flash it with a rom for 5.1.1
You shouldn't mess with the PIT files!
curiouswrecker said:
What country are you from? Are you sure the phone isn't on 5.1.1??
Download the firmware from sammobile of your own country or the nearest country/countries, put the device in Odin mode and try to flash that one through Odin "AP" Okay "IF IT FAILS" (copy the Odin log and paste it on this thread. If it succeeds LET US KNOW PLEASE.
Be sure of the Android version.. If that's impossible my safe bet is to flash it with a rom for 5.1.1
You shouldn't mess with the PIT files!
Click to expand...
Click to collapse
hey,
first of all, thanks for the replay!
If I flashed with smartswitch - then it should flash the newest rom and the one who fits for the device.
what I flashed in odin is: G925FXXU3COJ1_G925FOJK3COJ3_G925FXXU3COJ6_HOME.tar
which is Israeli firmware and 5.1.1
Entebox said:
hey,
first of all, thanks for the replay!
If I flashed with smartswitch - then it should flash the newest rom and the one who fits for the device.
what I flashed in odin is: G925FXXU3COJ1_G925FOJK3COJ3_G925FXXU3COJ6_HOME.tar
which is Israeli firmware and 5.1.1
Click to expand...
Click to collapse
Okay, BUT when you ran Odin did it succeed or fail flashing the device?
If it failed what was displayed on Odin logs?
If it failed, Please re-flash your device again through Odin and whether it fails OR succeeds, COPY THE LOG AND PASTE IT HERE !
I need to see the logs, if you want help.
curiouswrecker said:
Okay, BUT when you ran Odin did it succeed or fail flashing the device?
If it failed what was displayed on Odin logs?
If it failed, Please re-flash your device again through Odin and whether it fails OR succeeds, COPY THE LOG AND PASTE IT HERE !
I need to see the logs, if you want help.
Click to expand...
Click to collapse
It didn't fail when flashing in odin.. just stuck on samsung logo.
Read the first post. I wrote everything I did..
Entebox said:
S6 edge stuck on opening logo of "Samsung galaxy S6 edge" - it's not mine, so I can't know the history that caused it - but I think it's related to a bad try of rooting.
when trying to flash a new stock firmware from Sammobile getting the same problem - even after wipe and wipe cache.
on recovery getting this messege on the bottom:
dm-verity vertification failed... need to check DRK first...
this is what I tried to do to fix it:
1) flashed newest stock - still no do.
2) tried to flash with smart switch - it did flash - but it didn't help - phone still in bootloop.
3) flashed S6-UniKernel_v6-0001-ODIN or S6-UniBase_BOG8_v2 - it did helped, the phone worked, but I lost the IMEI and needed a certificate to fix the IMEI, I did it and the phone works fine..... BUT I can't left it with a custom rom 'cause I want the original updates and the original stock rom.
4) tried to flash the repair firmware G925FXXU1AOCV (comes with 4 files CSC, AP, MODEM and BOOTLOADER) which is 5.0.1, so it fails (tried also with pit file) - didn't do.
5) last thing I'm willing to try - is to split a new firmware to CSC MODEM BOOTLOADER and AP by myself... the only problem is - I don't actually know how to do it.
another thing I've noticed on the download mode it is written:
Current Binary: samsung Official and System status: custom
I was wonder if someone can give me a clue what to do, and how to fix this problem.
thanks!
Click to expand...
Click to collapse
You mean this post? It isn't clear enough, if you want help answer the questions people ask otherwise no one can help you.
And look, we are not talking about the device but we are talking about ODIN! Does ODIN fail or succeed flashing?
IF ODIN SUCCEEDS WITH FLASHING, THEN TELL ME!
SUCCEEDS Like This;
https://kpmgsecurity.files.wordpress.com/2014/12/odin-pass-autoroot.png
Or
FAILS Like This; http://ajqi.com/wp-content/uploads/...or-and-nand-erase-all-for-Samsung-devices.jpg
OKAY?
Entebox said:
S6 edge stuck on opening logo of "Samsung galaxy S6 edge" - it's not mine, so I can't know the history that caused it - but I think it's related to a bad try of rooting.
when trying to flash a new stock firmware from Sammobile getting the same problem - even after wipe and wipe cache.
on recovery getting this messege on the bottom:
dm-verity vertification failed... need to check DRK first...
this is what I tried to do to fix it:
1) flashed newest stock - still no do.
2) tried to flash with smart switch - it did flash - but it didn't help - phone still in bootloop.
3) flashed S6-UniKernel_v6-0001-ODIN or S6-UniBase_BOG8_v2 - it did helped, the phone worked, but I lost the IMEI and needed a certificate to fix the IMEI, I did it and the phone works fine..... BUT I can't left it with a custom rom 'cause I want the original updates and the original stock rom.
4) tried to flash the repair firmware G925FXXU1AOCV (comes with 4 files CSC, AP, MODEM and BOOTLOADER) which is 5.0.1, so it fails (tried also with pit file) - didn't do.
5) last thing I'm willing to try - is to split a new firmware to CSC MODEM BOOTLOADER and AP by myself... the only problem is - I don't actually know how to do it.
another thing I've noticed on the download mode it is written:
Current Binary: samsung Official and System status: custom
I was wonder if someone can give me a clue what to do, and how to fix this problem.
thanks!
Click to expand...
Click to collapse
Im going through the same madness for over 2 weeks...
heres my thread with a lot of amazing people tring to help....
maybe something there will help and apply to u and get urs up an running
http://forum.xda-developers.com/galaxy-s6-edge/help/bricked-s6-edge-sm-g925f-help-please-t3286385
please let me know if you get any sort of fix as i think im having same sort of bootloader issue....
Hey Ice, i didn't get your reply on ur thread sorry.
Do you have the same UniKernel as described above?
Please give me all info you have about your device and the current condition of the device (please be clear about what you can do with the device now and how you get to a certain menu such as Recovery/OdiDLmode/Smartswitch/Bootloop*kind of bootloop.)
Hope to be of good help.
curiouswrecker said:
Hey Ice, i didn't get your reply on ur thread sorry.
Do you have the same UniKernel as described above?
Please give me all info you have about your device and the current condition of the device (please be clear about what you can do with the device now and how you get to a certain menu such as Recovery/OdiDLmode/Smartswitch/Bootloop*kind of bootloop.)
Hope to be of good help.
Click to expand...
Click to collapse
Hi thanks,
have no idea about unikernel and have not tried anything with unikernel,
read someting about this somewhere else too,, something about the kernel not even loading cud be a problem?
phone is a galaxy s6 edge SM-G925F
was working fine and apparently on hungarian XEH firmware but not sure if it was on 5.02 or 5.1.1 when 16 year old kid did something or the other with it to put into bricked state.
have no idea of its previous info or condition as it was handed to me in a bricked state
only thing i can do with device is get into download mode and flash via odin...
have never ever been able to get it into recovery mode ever !!!! not even after any successful flashing
I can flash many stock files either the single tar files or either the 4 part multifirmware files
Can do flash and emergency recovery firmware through samsung smartswitch
but no matter what flash if its odin stock firmware flash or samsung smartswitch flash have never seen recovery and always can never get past the white samsung galaxy edge 6 with powered by android in white at bottom too
after succesful flashes in odin cant get out of download mode if auto reboot is ticked, only way out is to hold vol down and power. or get back into download mode then vol down to cancel/restart,
phone just never gets past that white message screen, sometimes that message will splash across screen continuouly like its turning on and off...like some sort of bootloop.... depending how i try to power/boot the phone back up again
and then sometimes it will just stay on the screen forever lit up and frozen/hanging...
strange thing that is happening now if you look at the last few attempts of flashing the 4 part multi firmware file and ticking re-partition to fix the pit files...
once i turn phone off out of download mode.... i cant power the phone/boot it up using just the power on button.
normally i assume to start the phone or turn phone on all u would need to do is hold power button.
so if phone is powered down or turned off after flash, power button alone will not turn it back on, have to go back into download mode and restart from there
i hope any of all that makes any sense at all
Here is a question for you.
When the device is OFF and you plug it into your computer, does the device then jump to the Smart Switch screen?
Btw IMPORTANT when you say that you "flash" the device through odin are you referring to the pictures on your thread where the logg states that it failed on "nand write" and once on "hidden.img" or did it actually pass after the complete flashing of all the files "hidden.img" included?
Firstly need to try this; when the device is stuck in the bootloop you have to do this.
It shows you this type of screen (1st)
http://www.pocketpc.ch/attachments/...49759183-s6-edge-bootloop-20151210_155028.jpg
(does it say kernel isn't seandroid enforced?)
Then this 2nd screen shows up
http://zidroid.com/wp-content/uploads/2014/03/Galaxy-S5-Boot-Animation.png
RIGHT after the 2nd screen SAMSUNG LOGO disappears press volume UP, HOME and POWER you need to be VERY FAST.
Then once the (1st) screen pops up again, release the POWER then volume UP and HOME buttons.
Maybe it's possible that it'll jump into recovery, even if it does this is not the solution just a way to diagnose.
Don't worry we'll fix it!
---------- Post added at 02:00 AM ---------- Previous post was at 01:10 AM ----------
If you have to flash it in any way to get it in a bootloop then the test isn't required! Don't do it.
Try the XDAdevelopers application!
icecoolpsyco said:
Hi thanks,
have no idea about unikernel and have not tried anything with unikernel,
read someting about this somewhere else too,, something about the kernel not even loading cud be a problem?
phone is a *GALAXY S6 EDGE SM-G925F*
was working fine and apparently on hungarian XEH firmware but not sure if it was on 5.02 or *5.1.1*
i hope any of all that makes any sense at all
Click to expand...
Click to collapse
This is what i gathered for you guys as a possible fix, it would work 100% if you guys didn't mess with EVERYTHING IN ODIN!
Because i have tested it myself several times.
READ EVERYTHING CLEARLY
4# When you mess with an s6 to the point that it does not turn on anymore and it only reacts until you plug it into a computer then it shows a screen "error occurred during update use Smart Switch..."
Well by that point Smart Switch mode partially takes over and you can only flash the device successfully in Smart Switch mode using Odin on the computer NOT Smart Switch.
(this knowledge will be useful later)
!!! PART 1 !!!
Here we go, follow this in detail.
STEP 1. You need to download the original Odin 3.10.6 from XDA here below:
http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613
STEP 2. Download the Kernel below:
http://mirror31.downloadandroidrom....nibase/S6-UniBase_BOG8_v2.tar?token=514002462
STEP 3. Open Odin on your computer as administrator.
STEP 4. Now connect your device to your computer.
STEP 5. Put your device/phone in Odin mode.
(volume down, home and power)
STEP 6. Make sure Odin has detected the device.
STEP 7. Load the Kernel in "AP" and wait 1 minute, then click START.
It should say PASS! However if it does not succeed, reboot the device and try it again in Smart Switch mode.
(It should actually pass the first try if these simple instructions are followed properly)
_____________________________________________
!!!PART 2!!!
STEP 1. Download this Firmware below:
http://www.sammobile.com/firmwares/download/62003/G925FXXU3QOKN_G925FVFG3QOKN_VDF/
STEP 2. Open Odin as administrator.
STEP 3. Connect your device to your computer.
STEP 4. Put your device/phone into Odin mode.
(volume down, home, power)
STEP 5. Make sure Odin has detected your device.
STEP 6. Load the Firmware in Odin "AP" and WAIT a few minutes UNTIL Odin is done reading the file. THEN CLICK on START and install the Firmware!
!!! IMPORTANT !!!
1st Possibility, if Odin shows "FAIL" "hidden.img" then that's a GOOD THING!
your phone is allmost fixed.
(Let me know if that happens.)
2nd Possibility, if Odin stops at "Nand Write" you must start over, unplug your device make sure it's OFF, then plug it back into the computer in order to boot the DEVICE into SMART SWITCH MODE and then follow the "STEPS 2,3,5,6" again!
DO NOT FOLLOW "STEP 4" Leave the device in SMART SWITCH MODE. (read above "4#")
HOWEVER
If Odin shows "PASS" then DO NOT UNPLUG the DEVICE! Go get yourself a coffee your device should be perfectly fixed!
Just unplug it AFTER A FEW MINUTES and try to switch it on, if it doesn't boot up? All you need to do is replug it into the computer and see if it boots up by itself (this does occur sometimes).
!!! LET US KNOW !!!
You can proceed rooting your device ask for help for a complete root guide for this specific device/model SM-G925F.
EDITED AND SIMPLIFIED.
Try the XDAdevelopers application!
curiouswrecker said:
This is what i gathered for you guys as a possible fix, it would work 100% if you guys didn't mess with EVERYTHING IN ODIN!
Because i have tested it myself several times.
READ EVERYTHING CLEARLY
4# When you mess with an s6 to the point that it does not turn on anymore and it only reacts until you plug it into a computer then it shows a screen "error occurred during update use Smart Switch..."
Well by that point Smart Switch mode partially takes over and you can only flash the device successfully in Smart Switch mode using Odin on the computer NOT Smart Switch.
(this knowledge may be useful later)
!!! PART 1 !!!
Here we go, follow this in detail.
STEP 1. You need to download the original Odin 3.10.6 from XDA here below:
http://forum.xda-developers.com/attachment.php?attachmentid=3109599&d=1420980613
STEP 2. Download the Kernel below:
http://mirror31.downloadandroidrom....nibase/S6-UniBase_BOG8_v2.tar?token=514002462
STEP 3. Open Odin on your computer as administrator.
STEP 4. Now connect your device to your computer, put your device/phone in Odin mode.
(volume down, home and power)
STEP 5. Make sure Odin has detected the device.
STEP 6. Load the Kernel in "AP" and wait 1 minute, then click START.
It should say PASS! However if it does not succeed, reboot the device and try it again in Smart Switch mode.
(It should actually pass the first try if these simple instructions are followed properly)
_____________________________________________
!!!PART 2!!!
STEP 1. Download this Firmware below:
http://www.sammobile.com/firmwares/download/62003/G925FXXU3QOKN_G925FVFG3QOKN_VDF/
STEP 2. Open Odin as administrator.
STEP 3. Connect your device to your computer, Put your device/phone into Odin mode.
(volume down, home, power)
STEP 4. Make sure Odin has detected your device.
STEP 5. Load the Firmware in Odin "AP" and wait a few minutes, when Odin is done reading the file click on START and install the Firmware.
!!! IMPORTANT !!!
1st Possibility, if Odin shows "FAIL" "hidden.img" then that's a GOOD THING!
your phone is allmost fixed.
(Let me know if that happens.)
2nd Possibility, if Odin stops at "Nand Write" you must start over, unplug your device make sure it's OFF, then plug it back in to the computer in order to boot the DEVICE into SMART SWITCH MODE and then follow the 5 STEPS again ONLY THIS TIME DO NOT BOOT THE DEVICE INTO ODIN MODE! Leave it in SMART SWITCH MODE.
(read above "4#")
If Odin shows "PASS" then DO NOT UNPLUG the DEVICE! Go get yourself a coffee your device should be perfectly fixed!
!!! LET US KNOW !!!
You can proceed rooting your device ask for help for a complete root guide.
Try the XDAdevelopers application!
Click to expand...
Click to collapse
I did flash that UniBase kernel and because of this I've lost the Imei number... I had to use Jtag box to recover the Imei.
so Beware when flashing this kernel.
I will try to flash the stock rom from sammobile... Hope it will help.
curiouswrecker said:
You mean this post? It isn't clear enough, if you want help answer the questions people ask otherwise no one can help you.
And look, we are not talking about the device but we are talking about ODIN! Does ODIN fail or succeed flashing?
IF ODIN SUCCEEDS WITH FLASHING, THEN TELL ME!
SUCCEEDS Like This;
https://kpmgsecurity.files.wordpress.com/2014/12/odin-pass-autoroot.png
Or
FAILS Like This; http://ajqi.com/wp-content/uploads/...or-and-nand-erase-all-for-Samsung-devices.jpg
OKAY?
Click to expand...
Click to collapse
when I flash it passes in Odin...
only problem is - the device stuck on the first logo (powered by android).
and on download mode it shows:
Current Binary: samsung Official
System status: custom
and on recovery it shows:
dm-verity vertification failed... need to check DRK first...
I did some research also
http://forum.gsmhosting.com/vbb/f77...drk-device-root-key-not-shoving-imei-1991601/
and
http://forum.gsmhosting.com/vbb/f684/dm-verity-verification-failed-1974767/
I'm not sure what is this rootkey issue, someone said that it is damaged, therefore it shows the dm verity vertification failure.
Entebox said:
http://forum.gsmhosting.com/vbb/f77...drk-device-root-key-not-shoving-imei-1991601/
and
http://forum.gsmhosting.com/vbb/f684/dm-verity-verification-failed-1974767/
I'm not sure what is this rootkey issue, someone said that it is damaged, therefore it shows the dm verity vertification failure.
Click to expand...
Click to collapse
found another thing, will give it a try:
http://forum.xda-developers.com/not...rification-t3293306/post64808458#post64808458
I also got the "dm verity vertification failure" today, but with me it happened because I was dumb enough to flash a G920I modem and bootloader on my G925F...
So it also bootlooped and everything, and then just like what you had, it asked me for Smart Switch. But then when I used Smart Switch on it, I got firmware from a totally different country than my own (think it was from Mexico or something), as I live in the Netherlands. And it even asked me for my phone's serial number before Smart Switch went on and flashed that firmware.
So I guess they only look at the CSC or something? Anyway, after that I got it into download mode and immediately flashed the newest correct firmware, and am happily flashing ROM's again Just download your own country's 5.1.1 firmware and you'll be alright, as long as you can get into download mode
Piliip said:
I also got the "dm verity vertification failure" today, but with me it happened because I was dumb enough to flash a G920I modem and bootloader on my G925F...
So it also bootlooped and everything, and then just like what you had, it asked me for Smart Switch. But then when I used Smart Switch on it, I got firmware from a totally different country than my own (think it was from Mexico or something), as I live in the Netherlands. And it even asked me for my phone's serial number before Smart Switch went on and flashed that firmware.
So I guess they only look at the CSC or something? Anyway, after that I got it into download mode and immediately flashed the newest correct firmware, and am happily flashing ROM's again Just download your own country's 5.1.1 firmware and you'll be alright, as long as you can get into download mode
Click to expand...
Click to collapse
yeah... already flashed the newest for my country.. it flashes well but still stuck on logo after.
from some reason after flashing, on DL mode it shows :
Current Binary: samsung Official
System status: custom
so the system status refuses to become official. even after using the smartswitch software.
I think maybe some of the partitions in the eMMC are corrupted.
Entebox said:
yeah... already flashed the newest for my country.. it flashes well but still stuck on logo after.
from some reason after flashing, on DL mode it shows :
Current Binary: samsung Official
System status: custom
so the system status refuses to become official. even after using the smartswitch software.
I think maybe some of the partitions in the eMMC are corrupted.
Click to expand...
Click to collapse
I think that's because you've tripped knox (hence custom), but you do have official samsung firmware, (hence official).
Edit: Have you checked your kernel?
Btw IMPORTANT when you say that you "flash" the device through odin are you referring to the pictures on your thread where the logg states that it failed on "nand write" and once on "hidden.img" or did it actually pass after the complete flashing of all the files "hidden.img" included?
succesful flashes i mean passes, i can get many many stock files to flash and pass no problem now as wasnt the case when i first got the phone
It shows you this type of screen (1st)
http://www.pocketpc.ch/attachments/s...210_155028.jpg
thats the first screen i can never ever get past
(does it say kernel isn't seandroid enforced?) it doesnt say that... but previously when i was flashing twrp and booted tried booting the phone up it woud say recovery isnat seandroid enforcing, i dont get that no more as i am flashing stock firmwares
---------- Post added at 01:17 PM ---------- Previous post was at 01:06 PM ----------
Entebox said:
I did flash that UniBase kernel and because of this I've lost the Imei number... I had to use Jtag box to recover the Imei.
so Beware when flashing this kernel.
I will try to flash the stock rom from sammobile... Hope it will help.
Click to expand...
Click to collapse
im willing to try that method above too... but am worried about losing the imei mentioned, have also read that happen to someone else and they fixed it too but they didnt mention how, and a worried to try it too as wouldnt know how to fix the imei if it went wrong as u mentioned u used soemthing called jtag to recover and i have no idea what or how that is
Entebox said:
I did flash that UniBase kernel and because of this I've lost the Imei number... I had to use Jtag box to recover the Imei.
so Beware when flashing this kernel.
I will try to flash the stock rom from sammobile... Hope it will help.
Click to expand...
Click to collapse
NO!!!
This is the UnibaseV9 Kernel, i have tested all the files i've shared on this thread personally on Samsung s6 edge model SM-G925F!
I never lost any imei!
Just follow the steps for God's sake!
Hi everyone
It is my first post here. Please help me.
I rooted my Samsung Galaxy Grand Prime Plus (SM-G532F) using 'odin' with root file(g532f).
After rooting my device it rebooted and asked for start up password.It says,"To start up your device enter your password." What is 'start up password'.How do I skip it without removing root? Or where do I get the password?
Please help?
Note: I flashed my device with stock firmware then it didn't asked password but it also removed root.?
Sorry for my bad English?
How did you root it?
I mean, what file did you use exactly?
maximvs85 said:
How did you root it?
I mean, what file did you use exactly?
Click to expand...
Click to collapse
I used 'Odin' software in pc to root..connected my device with pc via USB..turned off device and then pressed VOLUME DOWN+HOME+POWER button(after VOLUME up)
Opened 'Odin' in pc. It recognised my device added the root file(I downloaded the root file according to my device model) in 'Odin'(in AP)..then started rooting..once rooting compeleted and my device restarted and It asked for password(to start up your device enter your password)but I didn't set any password.
Sorry for my bad English
So I flashed stock Firmware and removed password but It also removed root.
Please help
How do I root without the password?
Where did you download the root .zip file you flashed?
http://rootsamsung.com/root-samsung-galaxy-grand-prime-plus-sm-g532f
From here
Try this method, it looks better and people say it works. Let me know
https://forum.xda-developers.com/android/development/root-samsung-galaxy-j2-prime-g532m-t3523090