The marshmallow update for the Samsung Galaxy J5 2016 (SM-J5108) is here! Links have been updated to reflect the second update.
Android version: 6.0.1
Android security patch level: 1 February 2017
(do note that the information above does not reflect the most recent update, for which the links are available below)
Link: https://drive.google.com/drive/folders/0B8346PsUO8X8cjlJd3dIQ19hNmM?usp=sharing
Alternatively, you could use Smart Switch (https://drive.google.com/drive/folders/0B8346PsUO8X8VlE4VGJndU8yYmM?usp=sharing) to update the software on your device.
thanks, my friend need it
通过我的 SM-A720F 上的 Tapatalk发言
Thanks god it arrives finally
And you guys are hoping that you will get the Android 7 update for this phone ?
U have only just got this
johnhux7 said:
And you guys are hoping that you will get the Android 7 update for this phone ?
U have only just got this
Click to expand...
Click to collapse
For all the other variants, yes.
*Update*
Internal speaker is not working, currently on region TGY. Do test it out for me also in case mine is a hardware issue!
Internal speaker is not working
Rizzed said:
*Update*
Internal speaker is not working, currently on region TGY. Do test it out for me also in case mine is a hardware issue!
Click to expand...
Click to collapse
its not working on my phone too,please help.
Which speaker? The earpiece on the front and the speaker at rear works well for me
I can make calls and watch videos with speaker turned on
PS. Using TGY firmware via OTA update, didn't used Odin
Yuen.Jason22 said:
Which speaker? The earpiece on the front and the speaker at rear works well for me
I can make calls and watch videos with speaker turned on
PS. Using TGY firmware via OTA update, didn't used Odin
Click to expand...
Click to collapse
The rear speaker isn't working
I used odin because the ota update was giving me eror during installation
Can anyone please help me out
The rear speaker works for me only on chinese version but not on TGY.i can't use the chinese version it's terrible.
maanni said:
its not working on my phone too,please help.
Click to expand...
Click to collapse
Found a couple of solutions to the above problem:
1) Flash the CHM region of the firmware
2) Flash a custom kernel (Demicro's Cherry Kernel) with the stock dt.img
3) Flash a custom ROM with the stock dt.img (eradicates the screen flickering issue)
4) or wait out for an update which fixes this issue
Here are the required (and modified) files for solution 2):
TWRP (by @lemlis): https://forum.xda-developers.com/galaxy-j5/samsung-galaxy-j5-2016-roms-kernels-recoveries--other-development/recovery-3-1-0-0-samsung-galaxy-j52016-t3571307
@Demicro's Cherry Kernel (modified): https://drive.google.com/file/d/0B8346PsUO8X8cndiZTZDaGliMTQ/view?usp=sharing
Odin: https://drive.google.com/drive/folders/0B8346PsUO8X8R25zc0ZmWUZNNFk?usp=sharing
Drivers: https://drive.google.com/drive/folders/0B8346PsUO8X8UXJRSkd3MWZocjA?usp=sharing
ADB (installer) by @Snoop05: https://drive.google.com/file/d/0B0MKgCbUM0itNVB1elljU2NPR0k/view
..and for solution 3), any ROM works fine (even though they do not state that our variant is supported). Just make sure to remove the dt_image/dt.img from the boot.img before flashing. Currently rocking @GeneticEnginer's Note 7 ROM!
Rizzed said:
Found a couple of solutions to the above problem:
1) Flash the CHM region of the firmware
2) Flash a custom kernel (Demicro's Cherry Kernel) with the stock dt.img
3) Flash a custom ROM with the stock dt.img (eradicates the screen flickering issue)
4) or wait out for an update which fixes this issue
Here are the required (and modified) files for solution 2):
TWRP (by @lemlis): https://forum.xda-developers.com/ga...covery-3-1-0-0-samsung-galaxy-j52016-t3571307
@Demicro's Cherry Kernel (modified): https://drive.google.com/file/d/0B8346PsUO8X8cndiZTZDaGliMTQ/view?usp=sharing
Odin: https://drive.google.com/drive/folders/0B8346PsUO8X8R25zc0ZmWUZNNFk?usp=sharing
Drivers: https://drive.google.com/drive/folders/0B8346PsUO8X8UXJRSkd3MWZocjA?usp=sharing
ADB (installer) by @Snoop05: https://drive.google.com/file/d/0B0MKgCbUM0itNVB1elljU2NPR0k/view
..and for solution 3), any ROM works fine (even though they do not state that our variant is supported). Just make sure to remove the dt_image/dt.img from the boot.img before flashing. Currently rocking @GeneticEnginer's Note 7 ROM!
Click to expand...
Click to collapse
Thanks aĺot
Can you please tell me how to flash a custom Rom with the stock dt.img? Through twrp?
maanni said:
Thanks aĺot
Can you please tell me how to flash a custom Rom with the stock dt.img? Through twrp?
Click to expand...
Click to collapse
Yeap!
Rizzed said:
Found a couple of solutions to the above problem:
1) Flash the CHM region of the firmware
2) Flash a custom kernel (Demicro's Cherry Kernel) with the stock dt.img
3) Flash a custom ROM with the stock dt.img (eradicates the screen flickering issue)
4) or wait out for an update which fixes this issue
Here are the required (and modified) files for solution 2):
TWRP (by @lemlis): https://forum.xda-developers.com/ga...covery-3-1-0-0-samsung-galaxy-j52016-t3571307
@Demicro's Cherry Kernel (modified): https://drive.google.com/file/d/0B8346PsUO8X8cndiZTZDaGliMTQ/view?usp=sharing
Odin: https://drive.google.com/drive/folders/0B8346PsUO8X8R25zc0ZmWUZNNFk?usp=sharing
Drivers: https://drive.google.com/drive/folders/0B8346PsUO8X8UXJRSkd3MWZocjA?usp=sharing
ADB (installer) by @Snoop05: https://drive.google.com/file/d/0B0MKgCbUM0itNVB1elljU2NPR0k/view
..and for solution 3), any ROM works fine (even though they do not state that our variant is supported). Just make sure to remove the dt_image/dt.img from the boot.img before flashing. Currently rocking @GeneticEnginer's Note 7 ROM!
Click to expand...
Click to collapse
Is there any way to install google apps and Google play store on CHM firmware ?
maanni said:
Is there any way to install google apps and Google play store on CHM firmware ?
Click to expand...
Click to collapse
Just flash the Gapps package in TWRP and you are good to go. Do note that this worked when I tested it after a factory reset or else it would bootloop at the Samsung logo (on Lollipop). Not sure if it would work now in Marshmallow.
Rizzed said:
Just flash the Gapps package in TWRP and you are good to go. Do note that this worked when I tested it after a factory reset or else it would bootloop at the Samsung logo (on Lollipop). Not sure if it would work now in Marshmallow.
Click to expand...
Click to collapse
Alright i will give it a try
Thanks man
---------- Post added at 12:38 PM ---------- Previous post was at 12:33 PM ----------
Rizzed said:
Just flash the Gapps package in TWRP and you are good to go. Do note that this worked when I tested it after a factory reset or else it would bootloop at the Samsung logo (on Lollipop). Not sure if it would work now in Marshmallow.
Click to expand...
Click to collapse
Can i flash gapps through odin over CHM?
???????????
Marshmallow
maanni said:
Alright i will give it a try
Thanks man
---------- Post added at 12:38 PM ---------- Previous post was at 12:33 PM ----------
Can i flash gapps through odin over CHM?
Click to expand...
Click to collapse
No.
And the gapps??
Yuen.Jason22 said:
Which speaker? The earpiece on the front and the speaker at rear works well for me
I can make calls and watch videos with speaker turned on
PS. Using TGY firmware via OTA update, didn't used Odin
Click to expand...
Click to collapse
i use OTA update too, speaker not working for me.
---------- Post added at 04:30 AM ---------- Previous post was at 04:19 AM ----------
Rizzed said:
*Update*
Internal speaker is not working, currently on region TGY. Do test it out for me also in case mine is a hardware issue!
Click to expand...
Click to collapse
try plug in earphone to the jack port. working for me, the speaker came alive, once u plug out, the speaker stop working again.
i did a factory reset & install v5.1.1 back by Odin. If yr phone hv data, it will start up & run in loops.
After system boot up from v5.1.1, update to v6.0.1 OTA update.
TGY firmware.
All working fine.
Related
DISCLAIMAR! Do it on your own Risk, I will not be responsible if you brick your device in anyway!
Its been a hell of a ride from newbie to first custom CM-12.1 ROM for my LG G3 Dual SIM phone, I really hate STOCK ROM! anyways I think kernel will work for Dual SIM [D857/8/8HK/9] variants and porting ROM to new device will not be much of an effort. You can check if the kernel works for you without flashing, just use "fastboot boot boot.img" if you has enable fastboot on G3 (by removing "Download Mode") otherwise take Backup [ALWAYS] and flash the zip to test if its boots on your Dual SIM variants. This ROM should work fine with Dual SIM models [D857/8/8HK/9] with few bugs as user's reported.
Things Work!
SIM 1 - 4G LTE
SIM 2 - 2G
WiFi
Camera
NFC
GPS
Bluetooth
Things doesn't Work!
WiFi - Same Mac address
You tell me!
Update - 2016-08-22:
Security patch 1st August 2016
Rebuild using Ubuntu 14.04 LTS instead of Mac OS X
Update - 2015-12-04:
Fixed brightness fluctuation/batter improvement
CM upstream bug fixes!
Update - 2015-11-21:
Raise volumes little bit
Fixed ACDB error
Fixed bluetooth voice call issue on SIM 2
CM upstream bug fixes!
Update - 2015-11-18:
CM upstream bug fixes for kernel & device!
Bluetooth fixes for Voice Calls/Skype/Whatapps/Viber
Update - 2015-11-11:
CM Bugs Fixes!
Sony thermal manager (Open source)
Update - 2015-11-09:
SIM 2 - Voice Calls
Update - 2015-11-08:
Mirco SD card fixed
Update - 2015-11-07:
Bluetooth fixed
Broadcom WiFi firmware updated
Source Core Repositories:
ROM:
https://github.com/mysteryjeans/android_device_lge_d856
https://github.com/mysteryjeans/android_device_lge_g3-common
Kernel:
https://github.com/mysteryjeans/android_kernel_lge_g3
Vendor:
https://github.com/mysteryjeans/android_vendor_lge_d856
https://github.com/mysteryjeans/android_vendor_lge_g3-common
Downloads:
CM12.1 D856 ROM
Flash via custom ROM [Recovery Method: boot.img+system.img]:
Download CM-12.1 zip & Google Apps on SDcard
Boot to recovery
Take Backup [ALWAYS]
Wipe Dalvik, System, Data & Cache (existing users can Wipe Dalvik & Cache only for dirty flashing to keep the data)
Install/Apply update CM-12.1 zip
Install/Apple update GApps.zip
Reboot
Other Resources:
Google Apps (I use OpenGApps)
How to Root
Flash TWRP Recovery
Enable Fastboot mode on LG G3
Credits:
@bender_007
@Eliminater74
@avicohh
@qqzwc
@XDA\*.*
Sir,Thank you for bringing cynogen rom for our devloper abandoned device， i would have surely givin it a shot but for me bluetooth is a must as i use my bluetooth headset a lot,only one sum works or both the sims are working ?thank you once again for your hars work.
Sent from my LG-D858HK using Tapatalk
tommy2601 said:
Sir,Thank you for bringing cynogen rom for our devloper abandoned device， i would have surely givin it a shot but for me bluetooth is a must as i use my bluetooth headset a lot,only one sum works or both the sims are working ?thank you once again for your hars work.
Sent from my LG-D858HK using Tapatalk
Click to expand...
Click to collapse
Yes both SIMS works! But in LG-D856 SIM 2 Slot is 2G only! What about D858HK?
Yea its also 2g only，sir are you working on fixing blutooth problem，all the best.
Sent from my LG-D858HK using Tapatalk
@tommy2601 Yes I am going too, thanks for the lucky wishes
I hope I can add G3 Dual Sim support for XenonHD
EDIT: sorry we haven't msim support yet
so far everything is working good except bluetooth, many thanks...if bluetooth issue fix..its become perfect rom
mysteryjeans said:
DISCLAIMAR! Do it on your own Risk, I will not be responsible if you brick your device in anyway!
Its been a hell of a ride from newbie to first custom CM-12.1 ROM for my LG G3 Dual SIM phone, I really hate STOCK ROM! anyways I think kernel will work for Dual SIM [D857/8/8HK/9] variants and porting ROM to new device will not be much of an effort. You can check if the kernel works for you without flashing, just use "fastboot boot boot.img" if you has enable fastboot on G3 (by removing "Download Mode") otherwise take Backup [ALWAYS] and flash the zip to test if its boots on your Dual SIM variants.
Click to expand...
Click to collapse
Excelent news I was looking for CM for my D858HK, I will try this rom next week
Thanks for the work to bring this rom to our phones. :good::good:
Thanks a lot, We were in dire need of a custom rom/CM for our phone D585HK!!
Really appreciate your work!!!
Blessings!!
---------- Post added at 03:47 PM ---------- Previous post was at 03:18 PM ----------
dadi11 said:
I hope I can add G3 Dual Sim support for XenonHD
Click to expand...
Click to collapse
That would be great!!!!! Can't wait!!
tommy2601 said:
Yea its also 2g only，sir are you working on fixing blutooth problem，all the best.
Sent from my LG-D858HK using Tapatalk
Click to expand...
Click to collapse
Bluetooth is Fixed! can you confirm this ROM works for your D858HK?
Oh thanx sir，No i havent tried it yet，is the fixed version up for download,do i have to change anything in build prop before flashing，what version of twrp needed to flash it and whats the worst that can happen if version is not compatable wit d858hk.
Sent from my LG-D858HK using Tapatalk
tommy2601 said:
Oh thanx sir，No i havent tried it yet，is the fixed version up for download,do i have to change anything in build prop before flashing，what version of twrp needed to flash it and whats the worst that can happen if version is not compatable wit d858hk.
Sent from my LG-D858HK using Tapatalk
Click to expand...
Click to collapse
Nothing just restore back for twrp, I think worst can be a boot loop. I played a lot with flashing myself with all sort of hit and trial to get the just right config
Ok sir thanks for thr reply，do you think i need to change anyhing in the rom zip before flashing as the downloaded is specifically med for d856. Already downloaded.i will flash it in another couple of days and rrport back
Sent from my LG-D858HK using Tapatalk
Great, just great so far
I have D858hk and this ROM is great, so far
Thanks for sharing your work, will report with any issues and hopefully nothing
Btw you need to flash gapps as it is not included
xaxis said:
Great, just great so far
I have D858hk and this ROM is great, so far
Thanks for sharing your work, will report with any issues and hopefully nothing
Btw you need to flash gapps as it is not included
Click to expand...
Click to collapse
Thats great news，which recovery did you use ?thanx
Sent from my LG-D858HK using Tapatalk
tommy2601 said:
Thats great news，which recovery did you use ?thanx
Sent from my LG-D858HK using Tapatalk
Click to expand...
Click to collapse
Twrp
---------- Post added at 09:00 AM ---------- Previous post was at 08:51 AM ----------
OK sadly there is a bug
Not able to get voice calls on second sim. Switch data to second sim, now I'm able to hear voice on sim2, but lost voice on sim1
Calls gets connected but can't hear and they can't hear me. Phone will ring and able to answer but no sound on earpiece nor speaker.
Strange thing I was able to get 4g on sim2
---------- Post added at 09:05 AM ---------- Previous post was at 09:00 AM ----------
Fyi:
In order to install, this what I did:
I was on 5.0.1 stock rooted
Wiped system/data/cache/davlik
Then flashed the ROM zip file,
no modem or kernel
Please advise if I need to do anything differently
xaxis said:
Twrp
---------- Post added at 09:00 AM ---------- Previous post was at 08:51 AM ----------
OK sadly there is a bug
Not able to get voice calls on second sim. Switch data to second sim, now I'm able to hear voice on sim2, but lost voice on sim1
Calls gets connected but can't hear and they can't hear me. Phone will ring and able to answer but no sound on earpiece nor speaker.
Strange thing I was able to get 4g on sim2
---------- Post added at 09:05 AM ---------- Previous post was at 09:00 AM ----------
Fyi:
In order to install, this what I did:
I was on 5.0.1 stock rooted
Wiped system/data/cache/davlik
Then flashed the ROM zip file,
no modem or kernel
Please advise if I need to do anything differently
Click to expand...
Click to collapse
Thank you very much for the review，then ill wait till bugs are sorted out
Sent from my LG-D858HK using Tapatalk
tommy2601 said:
Ok sir thanks for thr reply，do you think i need to change anyhing in the rom zip before flashing as the downloaded is specifically med for d856. Already downloaded.i will flash it in another couple of days and rrport back
Sent from my LG-D858HK using Tapatalk
Click to expand...
Click to collapse
@jeddahboy23 has confirmed, D856 ROM is working fine on his D858HK.
This ROM will work for D857/D858 as well, since my device specially mentioned it below battery compartment.
mysteryjeans said:
@jeddahboy23 has confirmed, D856 ROM is working fine on his D858HK.
This ROM will work for D857/D858 as well, since my device specially mentioned it below battery compartment.
Click to expand...
Click to collapse
Can you make and receive calls from both sims with no issues?
I'm having this problem as I mentioned above
Thkx
I Confirm!!
mysteryjeans said:
Bluetooth is Fixed! can you confirm this ROM works for your D858HK?
Click to expand...
Click to collapse
I can confirm this ROM is working perfectly on D858HK but model number is changed in the about phone section
Any one having same problem!! Having any solution to it!? And how can i calibrate it??
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??
Click to expand...
Click to collapse
This forum is intended to be for accessories only! Please ask in Q&A, there are already a ton of threads discussing your problem with solutions.
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??what is your rom?
Click to expand...
Click to collapse
rowihel2012 said:
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??what is your rom?
Click to expand...
Click to collapse
Stock cm12
Sent from my Moto G 2014 using XDA Labs
Click to expand...
Click to collapse
[email protected] said:
rowihel2012 said:
Stock cm12
Sent from my Moto G 2014 using XDA Labs
Click to expand...
Click to collapse
Fingerprint is working like a charm, in all ROMs.
It must be your hardware issue, take it in Service Center
Click to expand...
Click to collapse
No I also have issue with finger print in mokke and nuclerom 7.1
just flash zuk z1 cyanogenmod qfil flashable rom with qfil software.... your fingerprint sensor will work, definitely....
---------- Post added at 07:53 AM ---------- Previous post was at 07:48 AM ----------
this happens when you flash zui roms in zuk z1 , which is not preinstalled with ZUI. persist.mbn and rpm.mbn files are different in both the version. just flash cyanogen qfil rom..
download drivers:
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
http://www.androidbrick.com/downloa...one-usb-adb-qualcomm-diag-drivers-windows-10/
full guide and rom link is here:
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
after that unlock root and flash twrp recovery, and install lineageos or ressurection remix rom...fingerprint sensor will work definitely
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??
Click to expand...
Click to collapse
Hello guys I have found a solution ?
Just download and flash the firmware from the link given below........on top of your nougat roms....the fingerprint option will be present once you flash this firmware.
Note: Works on nougat roms don't know about Oreo roms
https://androidfilehost.com/?fid=24351979186684091
I think in nougat ROMs you can separately download nougat ham firmware zip.
crossmanx said:
just flash zuk z1 cyanogenmod qfil flashable rom with qfil software.... your fingerprint sensor will work, definitely....
---------- Post added at 07:53 AM ---------- Previous post was at 07:48 AM ----------
this happens when you flash zui roms in zuk z1 , which is not preinstalled with ZUI. persist.mbn and rpm.mbn files are different in both the version. just flash cyanogen qfil rom..
download drivers:
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
http://www.androidbrick.com/downloa...one-usb-adb-qualcomm-diag-drivers-windows-10/
full guide and rom link is here:
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
after that unlock root and flash twrp recovery, and install lineageos or ressurection remix rom...fingerprint sensor will work definitely
Click to expand...
Click to collapse
Is this the rom where we get cyanogen 12.1 watermark??
Gimana cara ngubah lenovo a1000 ke xiaomi note 4 x
[email protected] said:
Gimana cara ngubah lenovo a1000 ke xiaomi note 4 x
Click to expand...
Click to collapse
please use english and this is Zuk Z1 forum
How can i resolve it bro.....fibgerprint option has been disappeared from settings
mohith_23 said:
How can i resolve it bro.....fibgerprint option has been disappeared from settings
Click to expand...
Click to collapse
Please read both pages, answers are already given.
This was the reason I gave away this phone as the fingerprint homebutton is just a design flaw. not quite sure if you can get a replacement from AliExpress
I have the same issue.
It might be due to an installation of ZUI way back in time when i accidently bricked my phone. Guess the fingerprint isn't working anymore till then (it worked before for sure on Lineage OS 14.1).
What I tried so far:
1) I installed the firmware file from AOSP-Extended from https://forum.xda-developers.com/zuk-z1/orig-development/rom-aospextended-rom-v5-0-t3720542 and AOSP-Extended Oreo. But the fingerprint didn't work.
2) I installed then AOSP-Extedend Pie but no different result.
3) I used QFIL to install cm-12.1-YOG4PAS3AJ-ham-20151021-qpst from here http://lenovo-forums.ru/topic/19190-zuk-z1-qpst-cm-121-yog4pas3aj-ham-signed-factory-e66b382c5e/ becuase the link provided on site 1 links to androidbrick where the link to the rom doesnt work anymore. Unfortunately QFIL didn't solve the issue.
4) Then I tried flashing Lineage OS 14.1 and flashing the ham-mm-firmware from here https://androidfilehost.com/?fid=817906626617950254 which didn't work too.
5) I used QFIL to install Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729_qpst from here https://androidfilehost.com/?fid=24052804347826528 but the fingerprint couldn't be configured there too.
6) I tried installing ZUI_1.6.384_ST_160518_qpst from here http://lenovo-forums.ru/topic/19189-zuk-z1-qpst-z1_cn_open_user_q44301_m_zui_16384_st_160518/ but sadly the result was the same.
7) I tried using restor-capacitive-button from here https://androidfilehost.com/?fid=24269982087009655 and again no change.
Im pretty sure it's not a hardware defect because I really don't know how that should have happened.
Is there anything else I could do?
Thanks to modpunk, Serenitys, and other developers, i builded cm14.1 for kor alpha and it works fine.
Great! Can you share it?
wow, it's stable for daily use?
I was looking for your thread since yesterday. any bugs? excited to try this out
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
josepmaria said:
Great! Can you share it?
Click to expand...
Click to collapse
you can find it on his androidfilehost profile, not sure if i'm allowed to share the link.
Did you face any bugs and does it support fingerprint unlock?
How did you do it?
Edit:
I'm going to try the latest build from androfilehost.
I hope the mic (in calling) is working and other basic functions. I have a G850k by the way.
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
Its a soft brick. Your model is not a korean variant he says that it is working for korean variants. For G850S/K/L only. Try to go to TWRP and flash another rom. Or use odin.
click.here said:
Its a soft brick. Your model is not a korean variant he says that it is working for korean variants. For G850S/K/L only. Try to go to TWRP and flash another rom. Or use odin.
Click to expand...
Click to collapse
okay thank you very much,
Downloaded and flashed CM.13, my phone is up and running again,
Sorry for the off-topic related post
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
kevkev0320 said:
okay thank you very much,
Downloaded and flashed CM.13, my phone is up and running again,
Sorry for the off-topic related post
Click to expand...
Click to collapse
I dont know which CM13 you are refering to but you can extract that from the official ROM if I'm not mistaken
click.here said:
I dont know which CM13 you are refering to but you can extract that from the official ROM if I'm not mistaken
Click to expand...
Click to collapse
It was an unofficial build, but my system is now running,
many thanks <3
I can confirm that CM14.1 works with my Korean variant G850k but the mic problem still persist from previous CM13 . I hope this could be fix and more power. You should create a new thread when everything seems to be functional so that we could also inform others and have they're feedbacks
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
ArisRafaelli said:
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
Click to expand...
Click to collapse
do u understand dutch? can i send u a PM?
kevkev0320 said:
do u understand dutch? can i send u a PM?
Click to expand...
Click to collapse
yes I do, go ahead.
ArisRafaelli said:
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
Click to expand...
Click to collapse
The alternative work around for that is to keep closing the popup screen til its gone or freeze it. Does the mic (in calling) or the voice recorder works for you?
click.here said:
The alternative work around for that is to keep closing the popup screen til its gone or freeze it. Does the mic (in calling) or the voice recorder works for you?
Click to expand...
Click to collapse
i tried, it won't go away. wasn't able to test anything tbh.
ArisRafaelli said:
i tried, it won't go away. wasn't able to test anything tbh.
Click to expand...
Click to collapse
You have to close it quickly and press next until you reach the home screen. After that just enable developer settings and it will go away.
@hdh980910 we wait for your answers.
Thanks i will go to flash cm14.1 on my alpha
Thanks i will go to flash cm14.1 on my alpha
many people in develoid cafe say kt alpha has connect out phenomenon. can you fix it?
Here is the link to orginal leaked source thread of Huawei p9 lite Android 9 Source files
-->Huawei P9 Lite Androi N Emui 5<--
Warning:
Everything including the boot logo will be replaced with huawei logos and the phone works like a cloned Huawei series phone with lot of instabilities like Camera,Sound,Mobile network detection etc won't work. TEST IT ON YOUR OWN RISK!!!
Procedure:
1. Download the two files
Files for DOWNLOAD:
Download this (update.zip B336): https://drive.google.com/open?id=0B0...2w1N3JrcE1yc2s (thanks to: @algnerd for mirror)
And download this data_full: https://drive.google.com/open?id=0B0...2Jra2E3UjF4ZDQ (thanks to: @algnerd for mirror)
2. Flash it in the order of their download using Meticulus twrp.
3. Neglect the errors that shows. Reboot the system and Huawei bootlogo appears.
4. It shows Optimising system and wait for sometime until it finish.
You can experience EMUI5 on your honor 5c before the official release with some glitches.
If someone can fix those network connetivity/simcard detection issue,it will be appreciable and myself trying every possibilities...
To revert back to stock Honor 5c emui, what i did is flashed the BOOT.img, then again attempted with the bootloader unlocking fastboot code,then flashed the stock ROM using VOL UP+POWER+VOL DOWN by placing the UPDATE.APP on sdcard. You may feel it weird !! I'm not a geek!!:silly:
Have u tried it? Is it working on our honor 5C?
It will be great if we can test emui 5 before official release.
Shubho20 said:
Have u tried it? Is it working on our honor 5C?
It will be great if we can test emui 5 before official release.
Click to expand...
Click to collapse
Video on Ui experience here:
https://www.youtube.com/watch?v=xlX0MTp_cT8
Shubho20 said:
Have u tried it? Is it working on our honor 5C?
It will be great if we can test emui 5 before official release.
Click to expand...
Click to collapse
It was posted after trying
gopinaidu77 said:
It was posted after trying
Click to expand...
Click to collapse
I tried but not recommended since many functions are not working.. i am trying to check with alternative files to make the main functions work or not..
honor_ninja95 said:
I tried but not recommended since many functions are not working.. i am trying to check with alternative files to make the main functions work or not..
Click to expand...
Click to collapse
That's a bit expected as this was for another device.
Had a go of this last night and also couldn't find a fix for the sim card issue, everything else seemed to work fine though. Will try again tomorrow when i've more time to play around with it, going to checkout each of the emui 5 OTA's and see if any of them work
The Revolution Nougat ROM RC2 has double tap to wake (DT2W) working on it, would be nice having that working on a honor 5c
hi guys i want to ask what boot.img did you flash coz i want to revert back to emui 4.1.1
It's a little tricky getting back. I used the dload method with stock recovery. Didn't work the first time. But after powering off the phone and trying a few times it worked
help~!!
coz i tried to download my firmware and my model is NMO L-31 so i should get my stock recovery their? or what? thanks on replying
msudario018 said:
coz i tried to download my firmware and my model is NMO L-31 so i should get my stock recovery their? or what? thanks on replying
Click to expand...
Click to collapse
Attached are the download links for your model, not sure which variant of the L31 you have. Download a Full firmware and place it in the dload folder on your SD card. Then with the stock recovery on your phone, do the 3 button recovery. It'll fail the first time, but just keep trying
how to know exactly mine haha coz my huawei gt3 is from dubai aka 5c
msudario018 said:
how to know exactly mine haha coz my huawei gt3 is from dubai aka 5c
Click to expand...
Click to collapse
It'll be written on the box
can i flash any of that? as i forgot my box im on outside.. at cafe
---------- Post added at 04:43 AM ---------- Previous post was at 04:37 AM ----------
and bro what will i download the ota or the full?
msudario018 said:
can i flash any of that? as i forgot my box im on outside.. at cafe
---------- Post added at 04:43 AM ---------- Previous post was at 04:37 AM ----------
and bro what will i download the ota or the full?
Click to expand...
Click to collapse
Full and you'd need to know the model
okay broo thanks..
---------- Post added at 04:46 AM ---------- Previous post was at 04:44 AM ----------
just keep trying right? so ineed to be on stock recovery.. then vol + and - power button to install update.app then thats it?
Bro its only HUAWEI L-31 only
If that's the case I would just use the latest NMO-L31C464
version. If you are coming from emui 5, it'll make it even hard, as the dload method always fails the first few times
msudario018 said:
Bro its only HUAWEI L-31 only
Click to expand...
Click to collapse
Be careful i flashing. You should flash the specific model only.
gopinaidu77 said:
Be careful i flashing. You should flash the specific model only.[/QUOT
to ask what aspect should wipe?
Click to expand...
Click to collapse
Android 10 is here!
Took a while, but here's Lineage 17.1 builds, based on Android 10.
Everything should work AFAIK, but let me know if something doesn't.
If you run into problems installing Gapps, you might need an updated
TWRP build. It needed a change to support the new system-as-root
in Android 10. If the official TWRP builds doesn't have it yet, there's
links below of some builds I did.
For root, use Magisk: https://forum.xda-developers.com/apps/magisk
If you are doing backups of 17.1 with TWRP, and wants to restore one of these backups,
you need to flash this right after restoring, or otherwise the boot will hang: http://www.mediafire.com/file/a454nnpp8l7afbr/fix_rootfs_label.zip/file (Needed only for older TWRP, and not for the one linked to below)
Download:
GT-I9190: https://www.mediafire.com/file/ewdbbg757ujbc3r/lineage-17.1-20220816-UNOFFICIAL-serrano3gxx.zip/file
GT-I9192: https://www.mediafire.com/file/a0ya2fdcf0drjt1/lineage-17.1-20220817-UNOFFICIAL-serranodsdd.zip/file
GT-I9195: https://www.mediafire.com/file/3ky5...7.1-20220816-UNOFFICIAL-serranoltexx.zip/file
SPH-L520: https://www.mediafire.com/file/l0le....1-20220817-UNOFFICIAL-serranoltespr.zip/file
SCH-R890: https://www.mediafire.com/file/cqxl....1-20220817-UNOFFICIAL-serranolteusc.zip/file
Recovery (TWRP):
GT-I9190: https://www.mediafire.com/file/e42oml5716ekvk7/twrp-3.6.2_9-0-serrano3gxx.img/file
GT-I9192: https://www.mediafire.com/file/2plk5azmfxwsm5z/twrp-3.6.2_9-0-serranodsdd.img/file
GT-I9195: https://www.mediafire.com/file/wtsopyh3rmfoatf/twrp-3.6.2_9-0-serranoltexx.img/file
SPH-L520: https://www.mediafire.com/file/iw68mr671fgftnb/twrp-3.6.2_9-0-serranoltespr.img/file
SCH-R890: https://www.mediafire.com/file/417w6vp0m338fb0/twrp-3.6.2_9-0-serranolteusc.img/file
Link to all builds:
GT-I9190: http://www.mediafire.com/folder/4kjlyp6v2lfnh/lineage-17.1
GT-I9192: http://www.mediafire.com/folder/hw7l5hqe0fv1m/lineage-17.1
GT-I9195: http://www.mediafire.com/folder/3911mczazsvdt/lineage-17.1
Download Gapps: https://opengapps.org/?api=10.0&variant=pico
Sources:
https://github.com/LineageOS/android_kernel_samsung_msm8930-common
https://github.com/LineageOS/android_device_samsung_msm8930-common
https://github.com/LineageOS/android_device_samsung_serrano-common
https://github.com/LineageOS/android_device_samsung_serrano3gxx
https://github.com/LineageOS/android_device_samsung_serranodsdd
https://github.com/LineageOS/android_device_samsung_serranoltexx
https://github.com/arco/android_device_samsung_serranoltespr
https://github.com/arco/android_device_samsung_serranolteusc
Cellular not working on the 9192? Upgrade your baseband: https://forum.xda-developers.com/t/modem-odin-stopped-samsung-galaxy-s4-mini-duos-i9192.2768593/
Thanks arco <3
Thanks :good: arne everything working on I9192
Arslan140 said:
Thanks :good: arne everything working on I9192
Click to expand...
Click to collapse
Is it working for you???? because i try but failed... Recovery img dont work....he stoped and no recovery no boot rom...
khatir bahri said:
Is it working for you???? because i try but failed... Recovery img dont work....he stoped and no recovery no boot rom...
Click to expand...
Click to collapse
Both Rom and Recovery Works for me on my I9192
Maybe your download get corrupt
Root is not working though as arne said
i tried to patched boot.img for magisk but it did not work either
little things that i notice So far
1st when creating QR code or Scan QR code for wifi(Android 10 feature) Settings Got Crash
2nd conditions/Summaries that shown on the top section of the settings like turn on mobile data,your phone is on silent..etc There is no way to dismiss that on previous versions you can swype to dissmiss that
Everything seem to be working well in here
And here is some screenshots for ya
And another thing I installed the rom and the gapos with the latest official TWRP and not Arco's one
Hello,
thanks for your work.
Sadly there are some ugly and heavy bugs, escpecially regarding some hardware
related things.
Bluetooth Audio stutters and cause the whole system ui to get laggy and also
some force closes can happen. Audio streaming is not possible.
Wifi Direct is not working anymore.
Memory leaks appear.
And so on..
After some hours of intensive and frustrating testing i went back to stock rom
where i never encounter such issues.
Im using the phone at home without any simcard just for audio streaming from
my nas to my hometheatre-system.
Best regards.
Dear arco68 ! What about magisk ?
---------- Post added at 12:26 PM ---------- Previous post was at 11:54 AM ----------
It is not possible to send sms directly from the app ,you have to choose a sim to send sms in the "Network and Internet" settings"
Arslan140 said:
1st when creating QR code or Scan QR code for wifi(Android 10 feature) Settings Got Crash
Click to expand...
Click to collapse
Will be fixed in next build.
Jaroslav.100 said:
Dear arco68 ! What about magisk ?
Click to expand...
Click to collapse
Google magisk and system-as-root. It's not a straight forward thing in Android 10, due to the bootimage is not containing a real ramdisk anymore. As far as I could figure out, you have to patch the recoveryimage, and boot to recovery in order for magisk to load. When booting this patched recoveryimage, magisk will boot into the normal system unless you keep the hardware keys pressed all until recovery is loaded. It's all a bit messy, and I could not get this to work though. If anyones gonna mess with this, be sure you have backups, in case normal boot gets broken.
It is not possible to send sms directly from the app ,you have to choose a sim to send sms in the "Network and Internet" settings"
Click to expand...
Click to collapse
Dual SIM? Probably some stuff are not implemented yet for this.
Thank you arco, we will wait for your updates !
@arco68 is our devices can install the GSI roms or nah ?
Ala Ghanmi said:
@arco68 is our devices can install the GSI roms or nah ?
Click to expand...
Click to collapse
No
Ala Ghanmi said:
And another thing I installed the rom and the gapos with the latest official TWRP and not Arco's one
Click to expand...
Click to collapse
I've also got it right first time on my GT-I9195 with the official TWRP 3.3.1-0
Diresh said:
No
Click to expand...
Click to collapse
Okay get it
---------- Post added at 08:22 AM ---------- Previous post was at 08:21 AM ----------
Claudio4780 said:
I've also got it right first time on my GT-I9195 with the official TWRP 3.3.1-0
Click to expand...
Click to collapse
That's nice
Is network is working fine for both sim , because previously linage os 16 have issue
omgitsavinash said:
Is network is working fine for both sim , because previously linage os 16 have issue
Click to expand...
Click to collapse
Both Sims are working fine
I installed this ROM on my test device. It all works very well. The only problem I noticed was like @franticfreddy said, the Bluetooth audio doesn't work right.