Any one having same problem!! Having any solution to it!? And how can i calibrate it??
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??
Click to expand...
Click to collapse
This forum is intended to be for accessories only! Please ask in Q&A, there are already a ton of threads discussing your problem with solutions.
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??what is your rom?
Click to expand...
Click to collapse
rowihel2012 said:
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??what is your rom?
Click to expand...
Click to collapse
Stock cm12
Sent from my Moto G 2014 using XDA Labs
Click to expand...
Click to collapse
[email protected] said:
rowihel2012 said:
Stock cm12
Sent from my Moto G 2014 using XDA Labs
Click to expand...
Click to collapse
Fingerprint is working like a charm, in all ROMs.
It must be your hardware issue, take it in Service Center
Click to expand...
Click to collapse
No I also have issue with finger print in mokke and nuclerom 7.1
just flash zuk z1 cyanogenmod qfil flashable rom with qfil software.... your fingerprint sensor will work, definitely....
---------- Post added at 07:53 AM ---------- Previous post was at 07:48 AM ----------
this happens when you flash zui roms in zuk z1 , which is not preinstalled with ZUI. persist.mbn and rpm.mbn files are different in both the version. just flash cyanogen qfil rom..
download drivers:
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
http://www.androidbrick.com/downloa...one-usb-adb-qualcomm-diag-drivers-windows-10/
full guide and rom link is here:
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
after that unlock root and flash twrp recovery, and install lineageos or ressurection remix rom...fingerprint sensor will work definitely
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??
Click to expand...
Click to collapse
Hello guys I have found a solution ?
Just download and flash the firmware from the link given below........on top of your nougat roms....the fingerprint option will be present once you flash this firmware.
Note: Works on nougat roms don't know about Oreo roms
https://androidfilehost.com/?fid=24351979186684091
I think in nougat ROMs you can separately download nougat ham firmware zip.
crossmanx said:
just flash zuk z1 cyanogenmod qfil flashable rom with qfil software.... your fingerprint sensor will work, definitely....
---------- Post added at 07:53 AM ---------- Previous post was at 07:48 AM ----------
this happens when you flash zui roms in zuk z1 , which is not preinstalled with ZUI. persist.mbn and rpm.mbn files are different in both the version. just flash cyanogen qfil rom..
download drivers:
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
http://www.androidbrick.com/downloa...one-usb-adb-qualcomm-diag-drivers-windows-10/
full guide and rom link is here:
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
after that unlock root and flash twrp recovery, and install lineageos or ressurection remix rom...fingerprint sensor will work definitely
Click to expand...
Click to collapse
Is this the rom where we get cyanogen 12.1 watermark??
Gimana cara ngubah lenovo a1000 ke xiaomi note 4 x
[email protected] said:
Gimana cara ngubah lenovo a1000 ke xiaomi note 4 x
Click to expand...
Click to collapse
please use english and this is Zuk Z1 forum
How can i resolve it bro.....fibgerprint option has been disappeared from settings
mohith_23 said:
How can i resolve it bro.....fibgerprint option has been disappeared from settings
Click to expand...
Click to collapse
Please read both pages, answers are already given.
This was the reason I gave away this phone as the fingerprint homebutton is just a design flaw. not quite sure if you can get a replacement from AliExpress
I have the same issue.
It might be due to an installation of ZUI way back in time when i accidently bricked my phone. Guess the fingerprint isn't working anymore till then (it worked before for sure on Lineage OS 14.1).
What I tried so far:
1) I installed the firmware file from AOSP-Extended from https://forum.xda-developers.com/zuk-z1/orig-development/rom-aospextended-rom-v5-0-t3720542 and AOSP-Extended Oreo. But the fingerprint didn't work.
2) I installed then AOSP-Extedend Pie but no different result.
3) I used QFIL to install cm-12.1-YOG4PAS3AJ-ham-20151021-qpst from here http://lenovo-forums.ru/topic/19190-zuk-z1-qpst-cm-121-yog4pas3aj-ham-signed-factory-e66b382c5e/ becuase the link provided on site 1 links to androidbrick where the link to the rom doesnt work anymore. Unfortunately QFIL didn't solve the issue.
4) Then I tried flashing Lineage OS 14.1 and flashing the ham-mm-firmware from here https://androidfilehost.com/?fid=817906626617950254 which didn't work too.
5) I used QFIL to install Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729_qpst from here https://androidfilehost.com/?fid=24052804347826528 but the fingerprint couldn't be configured there too.
6) I tried installing ZUI_1.6.384_ST_160518_qpst from here http://lenovo-forums.ru/topic/19189-zuk-z1-qpst-z1_cn_open_user_q44301_m_zui_16384_st_160518/ but sadly the result was the same.
7) I tried using restor-capacitive-button from here https://androidfilehost.com/?fid=24269982087009655 and again no change.
Im pretty sure it's not a hardware defect because I really don't know how that should have happened.
Is there anything else I could do?
Related
Hey gyzzz.....There is Official Motorola Camera & Gallery Flash-able zip. And flashable zip work with all roms/devices.
NOTE :- Tested by me only on yureka and working fine.
All functions are working except SlowMo video (encoding features missing in roms)
Survives (CM) ota updates.
Semi-Removes stock CM Camera & Gallery, will come back with undo zip.
INSTALLATION
Put zip file in internal memory
Open recovery and flash Zip file
Reboot Device and Enjoy.....
UNINSTALL ZIP FILE
To uninstall flash the MotoCameraUndo.zip file from recovery.
Thanks luca020400 for fixing ota survival.
DOWNLOAD FILE HERE
Server 1
Server 2 (Google Drive)
HIT THANKS BUTTON IF YOU LIKE :good:
it will works on stock rom cm12.1 with rooted device
ramadhuri said:
it will works on stock rom cm12.1 with rooted device
Click to expand...
Click to collapse
You have to try out your own bcoz zip try only on custom rom ...if you got success plzz notify me in comment.....
Ashish Kundra said:
You have to try out your own bcoz zip try only on custom rom ...if you got success plzz notify me in comment.....
Click to expand...
Click to collapse
yaaaa i got it in stock rom
There are two files for MotoCamera. Which one is to be used?
Can you just brief about the features? Is it better than Cyanogen camera?
Atul Kaji said:
There are two files for MotoCamera. Which one is to be used?
Can you just brief about the features? Is it better than Cyanogen camera?
Click to expand...
Click to collapse
choose any of them and not comparison with cynogen camera becoz this app for motorola lovers and ordinary use only.....:good:
ramadhuri said:
yaaaa i got it in stock rom
Click to expand...
Click to collapse
Thanx ramaduri for trying this zip on stock rom ......and enjoy the app....:good:
oppocamera vs motorola camera for yureka
which one is better ?
vjbvsh said:
which one is better ?
Click to expand...
Click to collapse
Both are good but oppo camera has more features than Motorola camera.
Do you have any idea where I can download latest oppo camera for yureka ?? ROM based on CM12.1
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
And thank you for this moto cam...
Installation Unsuccessful
I'm using Yureka plus, when I started to install this app it shows an error "Footer Error", please suggest me????
dubeypawan1 said:
I'm using Yureka plus, when I started to install this app it shows an error "Footer Error", please suggest me????
Click to expand...
Click to collapse
guess its only for YU and doesnt support YU+
Anyone has any idea, where I can I find oppo camera ... Latest one!!?
vjbvsh said:
Do you have any idea where I can download latest oppo camera for yureka ?? ROM based on CM12.1
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
And thank you for this moto cam...
Click to expand...
Click to collapse
no idea......search on yu forums or xda site.
dubeypawan1 said:
I'm using Yureka plus, when I started to install this app it shows an error "Footer Error", please suggest me????
Click to expand...
Click to collapse
zip only for yureka you can't able to install that zip on yureka plus....
The marshmallow update for the Samsung Galaxy J5 2016 (SM-J5108) is here! Links have been updated to reflect the second update.
Android version: 6.0.1
Android security patch level: 1 February 2017
(do note that the information above does not reflect the most recent update, for which the links are available below)
Link: https://drive.google.com/drive/folders/0B8346PsUO8X8cjlJd3dIQ19hNmM?usp=sharing
Alternatively, you could use Smart Switch (https://drive.google.com/drive/folders/0B8346PsUO8X8VlE4VGJndU8yYmM?usp=sharing) to update the software on your device.
thanks, my friend need it
通过我的 SM-A720F 上的 Tapatalk发言
Thanks god it arrives finally
And you guys are hoping that you will get the Android 7 update for this phone ?
U have only just got this
johnhux7 said:
And you guys are hoping that you will get the Android 7 update for this phone ?
U have only just got this
Click to expand...
Click to collapse
For all the other variants, yes.
*Update*
Internal speaker is not working, currently on region TGY. Do test it out for me also in case mine is a hardware issue!
Internal speaker is not working
Rizzed said:
*Update*
Internal speaker is not working, currently on region TGY. Do test it out for me also in case mine is a hardware issue!
Click to expand...
Click to collapse
its not working on my phone too,please help.
Which speaker? The earpiece on the front and the speaker at rear works well for me
I can make calls and watch videos with speaker turned on
PS. Using TGY firmware via OTA update, didn't used Odin
Yuen.Jason22 said:
Which speaker? The earpiece on the front and the speaker at rear works well for me
I can make calls and watch videos with speaker turned on
PS. Using TGY firmware via OTA update, didn't used Odin
Click to expand...
Click to collapse
The rear speaker isn't working
I used odin because the ota update was giving me eror during installation
Can anyone please help me out
The rear speaker works for me only on chinese version but not on TGY.i can't use the chinese version it's terrible.
maanni said:
its not working on my phone too,please help.
Click to expand...
Click to collapse
Found a couple of solutions to the above problem:
1) Flash the CHM region of the firmware
2) Flash a custom kernel (Demicro's Cherry Kernel) with the stock dt.img
3) Flash a custom ROM with the stock dt.img (eradicates the screen flickering issue)
4) or wait out for an update which fixes this issue
Here are the required (and modified) files for solution 2):
TWRP (by @lemlis): https://forum.xda-developers.com/galaxy-j5/samsung-galaxy-j5-2016-roms-kernels-recoveries--other-development/recovery-3-1-0-0-samsung-galaxy-j52016-t3571307
@Demicro's Cherry Kernel (modified): https://drive.google.com/file/d/0B8346PsUO8X8cndiZTZDaGliMTQ/view?usp=sharing
Odin: https://drive.google.com/drive/folders/0B8346PsUO8X8R25zc0ZmWUZNNFk?usp=sharing
Drivers: https://drive.google.com/drive/folders/0B8346PsUO8X8UXJRSkd3MWZocjA?usp=sharing
ADB (installer) by @Snoop05: https://drive.google.com/file/d/0B0MKgCbUM0itNVB1elljU2NPR0k/view
..and for solution 3), any ROM works fine (even though they do not state that our variant is supported). Just make sure to remove the dt_image/dt.img from the boot.img before flashing. Currently rocking @GeneticEnginer's Note 7 ROM!
Rizzed said:
Found a couple of solutions to the above problem:
1) Flash the CHM region of the firmware
2) Flash a custom kernel (Demicro's Cherry Kernel) with the stock dt.img
3) Flash a custom ROM with the stock dt.img (eradicates the screen flickering issue)
4) or wait out for an update which fixes this issue
Here are the required (and modified) files for solution 2):
TWRP (by @lemlis): https://forum.xda-developers.com/ga...covery-3-1-0-0-samsung-galaxy-j52016-t3571307
@Demicro's Cherry Kernel (modified): https://drive.google.com/file/d/0B8346PsUO8X8cndiZTZDaGliMTQ/view?usp=sharing
Odin: https://drive.google.com/drive/folders/0B8346PsUO8X8R25zc0ZmWUZNNFk?usp=sharing
Drivers: https://drive.google.com/drive/folders/0B8346PsUO8X8UXJRSkd3MWZocjA?usp=sharing
ADB (installer) by @Snoop05: https://drive.google.com/file/d/0B0MKgCbUM0itNVB1elljU2NPR0k/view
..and for solution 3), any ROM works fine (even though they do not state that our variant is supported). Just make sure to remove the dt_image/dt.img from the boot.img before flashing. Currently rocking @GeneticEnginer's Note 7 ROM!
Click to expand...
Click to collapse
Thanks aĺot
Can you please tell me how to flash a custom Rom with the stock dt.img? Through twrp?
maanni said:
Thanks aĺot
Can you please tell me how to flash a custom Rom with the stock dt.img? Through twrp?
Click to expand...
Click to collapse
Yeap!
Rizzed said:
Found a couple of solutions to the above problem:
1) Flash the CHM region of the firmware
2) Flash a custom kernel (Demicro's Cherry Kernel) with the stock dt.img
3) Flash a custom ROM with the stock dt.img (eradicates the screen flickering issue)
4) or wait out for an update which fixes this issue
Here are the required (and modified) files for solution 2):
TWRP (by @lemlis): https://forum.xda-developers.com/ga...covery-3-1-0-0-samsung-galaxy-j52016-t3571307
@Demicro's Cherry Kernel (modified): https://drive.google.com/file/d/0B8346PsUO8X8cndiZTZDaGliMTQ/view?usp=sharing
Odin: https://drive.google.com/drive/folders/0B8346PsUO8X8R25zc0ZmWUZNNFk?usp=sharing
Drivers: https://drive.google.com/drive/folders/0B8346PsUO8X8UXJRSkd3MWZocjA?usp=sharing
ADB (installer) by @Snoop05: https://drive.google.com/file/d/0B0MKgCbUM0itNVB1elljU2NPR0k/view
..and for solution 3), any ROM works fine (even though they do not state that our variant is supported). Just make sure to remove the dt_image/dt.img from the boot.img before flashing. Currently rocking @GeneticEnginer's Note 7 ROM!
Click to expand...
Click to collapse
Is there any way to install google apps and Google play store on CHM firmware ?
maanni said:
Is there any way to install google apps and Google play store on CHM firmware ?
Click to expand...
Click to collapse
Just flash the Gapps package in TWRP and you are good to go. Do note that this worked when I tested it after a factory reset or else it would bootloop at the Samsung logo (on Lollipop). Not sure if it would work now in Marshmallow.
Rizzed said:
Just flash the Gapps package in TWRP and you are good to go. Do note that this worked when I tested it after a factory reset or else it would bootloop at the Samsung logo (on Lollipop). Not sure if it would work now in Marshmallow.
Click to expand...
Click to collapse
Alright i will give it a try
Thanks man
---------- Post added at 12:38 PM ---------- Previous post was at 12:33 PM ----------
Rizzed said:
Just flash the Gapps package in TWRP and you are good to go. Do note that this worked when I tested it after a factory reset or else it would bootloop at the Samsung logo (on Lollipop). Not sure if it would work now in Marshmallow.
Click to expand...
Click to collapse
Can i flash gapps through odin over CHM?
???????????
Marshmallow
maanni said:
Alright i will give it a try
Thanks man
---------- Post added at 12:38 PM ---------- Previous post was at 12:33 PM ----------
Can i flash gapps through odin over CHM?
Click to expand...
Click to collapse
No.
And the gapps??
Yuen.Jason22 said:
Which speaker? The earpiece on the front and the speaker at rear works well for me
I can make calls and watch videos with speaker turned on
PS. Using TGY firmware via OTA update, didn't used Odin
Click to expand...
Click to collapse
i use OTA update too, speaker not working for me.
---------- Post added at 04:30 AM ---------- Previous post was at 04:19 AM ----------
Rizzed said:
*Update*
Internal speaker is not working, currently on region TGY. Do test it out for me also in case mine is a hardware issue!
Click to expand...
Click to collapse
try plug in earphone to the jack port. working for me, the speaker came alive, once u plug out, the speaker stop working again.
i did a factory reset & install v5.1.1 back by Odin. If yr phone hv data, it will start up & run in loops.
After system boot up from v5.1.1, update to v6.0.1 OTA update.
TGY firmware.
All working fine.
Hi guys! I have a problem with my fingerprint scanner.
Now i used Resurrection Remix-N v5.8.3 (7.1.2) by andr68rus but i have used every single android nougat ROM and all had a problem with fingerprint scanner.
Here's the problem... When i lock the phone and after some minutes i want to use it again the fingerprint scanner doesn't work!
Do you guys have the same problem with the fingerprint scanner or I'm the only one?
Fingerprint firmware is in the "modem" firmware. Flash either latest Developer or China modem from here and it should solve your problem. https://yadi.sk/d/5v2p3F7o3GJBxn
Now it's ok! Thank you so much!
bwalter said:
Fingerprint firmware is in the "modem" firmware. Flash either latest Developer or China modem from here and it should solve your problem. https://yadi.sk/d/5v2p3F7o3GJBxn
Click to expand...
Click to collapse
While what I've seen suggests as much, since this sort of mod can cause a hard brick.... will this work with the x829?
Edit: Impatient, didn't wait. Running w/ PureNexus Nougat, seems to have fixed the problem. Thanks!
Chinese 23s modem firmware didn't fix my fp.
Enviado de meu Le X820 usando Tapatalk
niscrulez said:
Chinese 23s modem firmware didn't fix my fp.
Enviado de meu Le X820 usando Tapatalk
Click to expand...
Click to collapse
Try developers modem!
Fingerprint still not working
Hi,
Tried the 3 modem drivers (India and US) and FP still not working, did it die or is this normal? Have you found any other drivers? Searched here in XDA but didn't find any. After installation do we need any additional configuration? Thanks.
Regards,
Pedro.
Hi,
i´m on LineageOS 14.1 and the Dev Version MODEM_419D_V.00050.zip fixed the FP for me. THX
Borbovsky said:
Hi,
Tried the 3 modem drivers (India and US) and FP still not working, did it die or is this normal? Have you found any other drivers? Searched here in XDA but didn't find any. After installation do we need any additional configuration? Thanks.
Regards,
Pedro.
Click to expand...
Click to collapse
Wich ROM you use?
Not working on Lineage 14.1
Console Master0 said:
Wich ROM you use?
Click to expand...
Click to collapse
Hi, I installed the latest Lineage for the x2, they released the Official Nougat version
https://download.lineageos.org/x2
and as a ROM I like it a lot but the fingerprint sensor only worked the first time when I was configuring the phone, after that it stopped working like if it was dead. This was with US ROM 16s, India ROM 19s, LOS 13 and now LOS 14.
Regards,
Pedro.
---------- Post added at 16:48 ---------- Previous post was at 16:45 ----------
BigTiger said:
Hi,
i´m on LineageOS 14.1 and the Dev Version MODEM_419D_V.00050.zip fixed the FP for me. THX
Click to expand...
Click to collapse
Where can we download it? tnx
Look at the second post
Still dead
BigTiger said:
Look at the second post
Click to expand...
Click to collapse
Tnx, googled it and went to the same place where I downloaded the other but I had downloaded the ROMs the said worked for them. Still nothing... do we need to clear any cache afterwards? I'll try it...
Tnx,
Pedro.
---------- Post added at 17:45 ---------- Previous post was at 17:28 ----------
What is the diff between 413D and 419D? Developer Modems...
Also don't forget to make sure that 'Settings -> Security -> Quick unlock' is turned on if you are having trouble using your fingerprint or it won't work. I somehow had mine disabled and didn't notice that for a while.
Still dead
ccheney said:
Also don't forget to make sure that 'Settings -> Security -> Quick unlock' is turned on if you are having trouble using your fingerprint or it won't work. I somehow had mine disabled and didn't notice that for a while.
Click to expand...
Click to collapse
My build doesnt seem to have quick unlock option, tried removing pin and starting with fingerprint + pin configuration but still nothing... Maybe it was the HW that stopped working, tnx for the help.
Regards,
Pedro.
Borbovsky said:
My build doesnt seem to have quick unlock option, tried removing pin and starting with fingerprint + pin configuration but still nothing... Maybe it was the HW that stopped working, tnx for the help.
Click to expand...
Click to collapse
Ok, I'm using RR 5.8.3 w/open gapps which may be why its showing up for me.
I am using the RR 5.8.3 w open gapps as well and no combination of modems fix my FP, it will some times read but never enough before it times out during the setup. it worked when i first got the phone then never again...
Hello.
In am on pure Nexus project.
I own the x829 version
What modem version tot flash tot fix fingerprint scanner ?
chetermaat said:
Hello.
In am on pure Nexus project.
I own the x829 version
What modem version tot flash tot fix fingerprint scanner ?
Click to expand...
Click to collapse
I use the CN23, it works pretty well
Gladheid latest 23
Slay1991 said:
I use the CN23, it works pretty well
Click to expand...
Click to collapse
Hi. I flashed that one still not working.
---------- Post added at 12:04 PM ---------- Previous post was at 11:54 AM ----------
What developer modem should i use for my x829
The 413D OR the 419D ?
chetermaat said:
Hi. I flashed that one still not working.
---------- Post added at 12:04 PM ---------- Previous post was at 11:54 AM ----------
What developer modem should i use for my x829
The 413D OR the 419D ?
Click to expand...
Click to collapse
Check 419D,if that doesn't work for you it's a hardware issue
Hello you all developers how are you.
Recently I was using Oppo F1S That device had a battery daring problem I sold that out.Now I am using Redmi Note 4.
But I found ColorOS 3.0 is aowsome look like iOS so I request you to best developers in the world to port ColorOS 3.0 for RN 4.
Ahhm someone already using this check it out.
But we need world's best developers checked OS.
It is in Chinese I can't get what is it
Check it out
Web:::
http://www.miui.com/forum.php?mod=v...ilter=typeid&typeid=5935&typeid=5935&mobile=2
Abubakar Wander said:
Hello you all developers how are you.
Recently I was using Oppo F1S That device had a battery daring problem I sold that out.Now I am using Redmi Note 4.
But I found ColorOS 3.0 is aowsome look like iOS so I request you to best developers in the world to port ColorOS 3.0 for RN 4.
Ahhm someone already using this check it out.
But we need world's best developers checked OS.
It is in Chinese I can't get what is it
Check it out
Web:::
http://www.miui.com/forum.php?mod=v...ilter=typeid&typeid=5935&typeid=5935&mobile=2
Click to expand...
Click to collapse
Lol.... What a post...??
---------- Post added at 07:57 PM ---------- Previous post was at 07:49 PM ----------
Here u go. Website translated in English...
https://translate.googleusercontent...bile=2&usg=ALkJrhjIi8G2SUvWNPxtHzbDD0QRyL25rA
Can someone mirror it to google driver or something?
If that's the same zip, which has been released on xda (Thread closed for now), do not install it as ColorOS Installation makes some of sensors to fail. So, better stick to Miui or flash a custom Rom or whatever you want, but do not install colorOS.
This ROM is for (mido), your mobile phone is MediaTek or Qualcomm 625? If you are MediaTek you can not install this ROM!
I am from MIUI China Forum
i download and install but stuck on Oppo boot logo i have 4GB Mido version any onle please help or any developer please make it
or all.
here is mirror link https://www.mediafire.com/?ejqhwc5njgaa2ai
For me sensor is working no issue at all
You need to format data after install the rom to not make your phone bootloop
Tested on my phone mido 3 gb
akino553 said:
For me sensor is working no issue at all
You need to format data after install the rom to not make your phone bootloop
Tested on my phone mido 3 gb
Click to expand...
Click to collapse
working only 3gb version my friend have it its working on his mobile but not my
i install properly
anyone try on 4GB version
rashmi0733 said:
working only 3gb version my friend have it its working on his mobile but not my
i install properly
anyone try on 4GB version
Click to expand...
Click to collapse
had a quick testing... everything is working no major bugs...
some highlights-
RIL
VoLTE
Google apps supported(u just need to install google play services one time)
camera is awesome
great battery backup
very less bloatware (can b removed easily)
hope it helped
plz give a thumps up if helpful....
No volte ?
how to get Google play services?
Otherwise no problem.
Anybody has any solutions?
drmuruga said:
how to get Google play services?
Click to expand...
Click to collapse
Download and install OpenGAPPs "pico". Make sure you download the installer for the correct Android version.
nicks.1106 said:
had a quick testing... everything is working no major bugs...
some highlights-
RIL
VoLTE
Google apps supported(u just need to install google play services one time)
camera is awesome
great battery backup
very less bloatware (can b removed easily)
hope it helped
plz give a thumps up if helpful....
Click to expand...
Click to collapse
Plz help give download link I will downloaded from MediaFire it's stucks on opposite boot logo
I can flash color os as secondary in multirom, everything work well, but volte didn't work.
drmuruga said:
I can flash color os as secondary in multirom, everything work well, but volte didn't work.
Click to expand...
Click to collapse
U have to activate volte in setting->call
drmuruga said:
No volte ?
how to get Google play services?
Otherwise no problem.
Anybody has any solutions?
Click to expand...
Click to collapse
Volte is there buddy...u just need to activate it...
And install Google play services apk file...that's it
Sahil132 said:
Plz help give download link I will downloaded from MediaFire it's stucks on opposite boot logo
Click to expand...
Click to collapse
Follow these steps to successfully flash the ROM...
nicks.1106 said:
U have to activate volte in setting->call
Click to expand...
Click to collapse
Thanks a lot.
---------- Post added at 08:14 PM ---------- Previous post was at 08:14 PM ----------
nicks.1106 said:
Volte is there buddy...u just need to activate it...
And install Google play services apk file...that's it
Click to expand...
Click to collapse
Thanks a lot.
Installation Step By ""nicks.1106""
1.wipe everything (system, cache,data)
2.flash cm13 firmware
3.flash cm13( do not boot)
4.flash color os
5.(optional) if u r facing sensor bugs then flash the sensor fix zip...
6.thats it
Note:- i formated my data(intern memory) before so that I can remove password on booting... sometimes this causes bootloop...
So if u have this password on boot, then better backup ur important stuff and format ur internal memory...
Link Sensor Fix https://www.mediafire.com/?7uyfg885efc7h25
wow! color os without google is very nice experience. i can use facebook, whatsup ,chrome etc also. any possibility to register in oppo ?
flash miui 8.2 firmware, flash color os as secondary in multirom (quark os is primary) ,reboot,im not format data( but first time when i flash as primary ,formatted data also ).No google services. Backup account is only needed.
Do i really have to install cm13 first? Im aware of failing sensors but i just wanna try it out
I'm not the creator, but want to start a discussion on that build!
I found the non-Compact build via Google search:
https://download.pixelexperience.org/g8341
https://download.pixelexperience.org/g8342
WARNING: Both builds are marked "stable", but are very buggy and should not be named "stable" at all!
Rooted_Ansh said:
They are just marked stable.. but they are beta release..
Click to expand...
Click to collapse
Rooted_Ansh said:
[The official build] is sodp (Sony open devices) and [Rooted_Ansh XZ1c build] has stock libs, drivers, and camera
Click to expand...
Click to collapse
How to flash:
shuang0922 said:
oem b? xz1 is A only.just need flash one img
How to flash Pixel Experience (PE) for yoshino platform (like XZ1):
boot twrp, flash pe zip, reboot fastboot, flash oem, then fastboot -w and reboot
Click to expand...
Click to collapse
Did any one give it a try ?
Sent from my G8342 using Tapatalk
sounds reaaaaly interesting!
could someone provide a full how-to guide?
thank you very much!!
BoZ
Just tried it and sadly it's not stable as this site said it's too slow many random restart Google camera stop working I'm back again to lineage 17
Sent from my GM1913 using Tapatalk
sorry mate, where did you find they say it's slow and has random reboots?
bozinsky73 said:
sorry mate, where did you find they say it's slow and has random reboots?
Click to expand...
Click to collapse
The hole system is unstable , while you navigate between apps also camera works only for the first time but after that it didn't work even i cleared it's cash and storage several times , sound also not working !!
This rom still needs a lot of work
Sent from my GM1913 using Tapatalk
SGH-i200 said:
XZ1c unofficial build by Rooted_Ansh (installation instruction for XZ1c, which is missing for XZ1!?):
https://forum.xda-developers.com/xp...el-experience-10-0-plus-update-t4071563/page7
Click to expand...
Click to collapse
What do you mean by the last line ? Installation instructions missing ?
---------- Post added at 12:26 AM ---------- Previous post was at 12:19 AM ----------
SGH-i200 said:
Same maintainer released this XZ1c official build:
https://download.pixelexperience.org/g8441
XZ1c unofficial build by Rooted_Ansh (installation instruction for XZ1c, which is missing for XZ1!?):
https://forum.xda-developers.com/xp...el-experience-10-0-plus-update-t4071563/page7
Click to expand...
Click to collapse
Also could you please remove unofficial xz1c links from here ?.. I have it's thread opened being a maintainer..
Hi, coming from LOS 17.1 I cannot follow instructions on official pixelexperiences site:
when I try to flash
fastboot flash oem_a SW_binaries_for_Xperia_Android_10.0.7.1_r1_v5a_yoshino.img
over fresh stock it turns out with error: no such partition
same when flashing oem_b
is there a fix for that?
thank you very much!
bozinsky73 said:
Hi, coming from LOS 17.1 I cannot follow instructions on official pixelexperiences site:
when I try to flash
fastboot flash oem_a SW_binaries_for_Xperia_Android_10.0.7.1_r1_v5a_yoshino.img
over fresh stock it turns out with error: no such partition
same when flashing oem_b
is there a fix for that?
thank you very much!
Click to expand...
Click to collapse
just type " fastboot flash oem oem.img " and flash the rom with twrp in Los17
bozinsky73 said:
Hi, coming from LOS 17.1 I cannot follow instructions on official pixelexperiences site:
when I try to flash
fastboot flash oem_a SW_binaries_for_Xperia_Android_10.0.7.1_r1_v5a_yoshino.img
over fresh stock it turns out with error: no such partition
same when flashing oem_b
is there a fix for that?
thank you very much!
Click to expand...
Click to collapse
oem b? xz1 is A only.just need flash one img
---------- Post added at 02:50 AM ---------- Previous post was at 02:46 AM ----------
bozinsky73 said:
Hi, coming from LOS 17.1 I cannot follow instructions on official pixelexperiences site:
when I try to flash
fastboot flash oem_a SW_binaries_for_Xperia_Android_10.0.7.1_r1_v5a_yoshino.img
over fresh stock it turns out with error: no such partition
same when flashing oem_b
is there a fix for that?
thank you very much!
Click to expand...
Click to collapse
How to flash PE :
for yoshino platform : boot twrp, flash pe zip, reboot fastboot, flash oem, then fastboot -w and reboot
u can find these in telegram group
shuang0922 said:
oem b? xz1 is A only.just need flash one img
---------- Post added at 02:50 AM ---------- Previous post was at 02:46 AM ----------
How to flash PE :
for yoshino platform : boot twrp, flash pe zip, reboot fastboot, flash oem, then fastboot -w and reboot
u can find these in telegram group
Click to expand...
Click to collapse
Thank you very much! I'm a totaly noob on xperia firmwares
Just to be sure: is oem.img the SW_BINARIES_FOR_XPERIA_ANDROID_10.0.7.1_R1_V5A_YOSHINO.img file?
BoZ
bozinsky73 said:
Thank you very much! I'm a totaly noob on xperia firmwares
Just to be sure: is oem.img the SW_BINARIES_FOR_XPERIA_ANDROID_10.0.7.1_R1_V5A_YOSHINO.img file?
BoZ
Click to expand...
Click to collapse
yes.xz1 is yoshino
u can c here
shuang0922 said:
yes.xz1 is yoshino
u can c here
Click to expand...
Click to collapse
and that oem means this
Has anyone managed to install this customrom?
I have tried installing it but it was repeated reboots
I find it hard to do according to the instructions given by the ROM provider and has installed the latest binary .
After I installed the OEM binary I flashed the ROM and it happened
I tried another way with flash again stock ROM but in newflasherv20 an error message popped up even though before I could install stock firmware v126 pie for Sov36 and what I want to install the firmware for Globa UK v228 doesn't suit me
now I have Rom SOV36 v126 Pie which I restore from twrp. but still want to try Pixel Experience Plus 10.0
There is the right method for this flash rom
as I said already Binary Flash and Pixel flash but so reboot repeatedly
Please make a tutorial step by step via notes or video to make it easier
shuang0922 said:
oem b? xz1 is A only.just need flash one img
How to flash Pixel Experience (PE) for yoshino platform:
boot twrp, flash pe zip, reboot fastboot, flash oem, then fastboot -w and reboot
Click to expand...
Click to collapse
Thanks for the hint. Will add that to the OP.
I found a few bugs in Rom PE
Battery charging is not stable
Advance boot not working
Sometimes it becomes slow after rebooting
Bug Camera
Bug Mic
Slow reboot even stuck
And somehow my TWRP suddenly disappeared after Vol - and Power TWRP didn't show up either
While I will use LoS17.1 because after installing OEM from Sony it is more stable
This is the worst rom for Sony xz1 i have ever tried
Sent from my G8342 using Tapatalk
hany ahmed79 said:
This is the worst rom for Sony xz1 i have ever tried
Sent from my G8342 using Tapatalk
Click to expand...
Click to collapse
I agree with you. Yes maybe there is something that works. But there are a lot of bugs in this Rom that make me disappointed as a holder of the G8341 because it is labeled Stable
But on the other hand the value of the OS itself is pretty good and the kernel also works well
Only in the Lib section that must be addressed again for developers
? There are things in this Rom that make me confused why I can't enter TWRP at all and I tried to flash again TWRP got failed results.
Now back to XperiaOS ( Stock Rom )
I agree with you also don't know why they marked it as stable release.
I'm now on lineage 17.1 unofficial build but it's way better and more stable.
Sent from my G8342 using Tapatalk
---------- Post added at 05:52 PM ---------- Previous post was at 05:49 PM ----------
starvirus10 said:
I agree with you. Yes maybe there is something that works. But there are a lot of bugs in this Rom that make me disappointed as a holder of the G8341 because it is labeled Stable
But on the other hand the value of the OS itself is pretty good and the kernel also works well
Only in the Lib section that must be addressed again for developers
[emoji848] There are things in this Rom that make me confused why I can't enter TWRP at all and I tried to flash again TWRP got failed results.
Now back to XperiaOS ( Stock Rom )
Click to expand...
Click to collapse
I agree with you also don't know why they marked it as stable release.
I'm now on lineage 17.1 unofficial build but it's way better and more stable.
Sent from my G8342 using Tapatalk
SGH-i200 said:
Thanks for the hint. Will add that to the OP.
Click to expand...
Click to collapse
Hey..
Why haven't you written on 1st post that the official ones are still in beta ?.. I told you before right ?... The rom is marked stable not the build..
Do not provide incomplete information to users and ruin their expectations ... !!!
---------- Post added at 08:46 AM ---------- Previous post was at 08:43 AM ----------
starvirus10 said:
I found a few bugs in Rom PE
Battery charging is not stable
Advance boot not working
Sometimes it becomes slow after rebooting
Bug Camera
Bug Mic
Slow reboot even stuck
And somehow my TWRP suddenly disappeared after Vol - and Power TWRP didn't show up either
While I will use LoS17.1 because after installing OEM from Sony it is more stable
Click to expand...
Click to collapse
hany ahmed79 said:
This is the worst rom for Sony xz1 i have ever tried
Click to expand...
Click to collapse
starvirus10 said:
I agree with you. Yes maybe there is something that works. But there are a lot of bugs in this Rom that make me disappointed as a holder of the G8341 because it is labeled Stable
But on the other hand the value of the OS itself is pretty good and the kernel also works well
Only in the Lib section that must be addressed again for developers
? There are things in this Rom that make me confused why I can't enter TWRP at all and I tried to flash again TWRP got failed results.
Now back to XperiaOS ( Stock Rom )
Click to expand...
Click to collapse
hany ahmed79 said:
I agree with you also don't know why they marked it as stable release.
I'm now on lineage 17.1 unofficial build but it's way better and more stable.
Sent from my G8342 using Tapatalk
---------- Post added at 05:52 PM ---------- Previous post was at 05:49 PM ----------
I agree with you also don't know why they marked it as stable release.
I'm now on lineage 17.1 unofficial build but it's way better and more stable.
Click to expand...
Click to collapse
It's written in the first post...
The ROM is marked as stable ... The build for this device and yoshino platform is still under beta ..
These are beta releases
To know and discuss more join : Pixel Experience Sony Group
https://t.me/PixelExperienceSony
PS : I am not the developer for official ones