Hi guys! I have a problem with my fingerprint scanner.
Now i used Resurrection Remix-N v5.8.3 (7.1.2) by andr68rus but i have used every single android nougat ROM and all had a problem with fingerprint scanner.
Here's the problem... When i lock the phone and after some minutes i want to use it again the fingerprint scanner doesn't work!
Do you guys have the same problem with the fingerprint scanner or I'm the only one?
Fingerprint firmware is in the "modem" firmware. Flash either latest Developer or China modem from here and it should solve your problem. https://yadi.sk/d/5v2p3F7o3GJBxn
Now it's ok! Thank you so much!
bwalter said:
Fingerprint firmware is in the "modem" firmware. Flash either latest Developer or China modem from here and it should solve your problem. https://yadi.sk/d/5v2p3F7o3GJBxn
Click to expand...
Click to collapse
While what I've seen suggests as much, since this sort of mod can cause a hard brick.... will this work with the x829?
Edit: Impatient, didn't wait. Running w/ PureNexus Nougat, seems to have fixed the problem. Thanks!
Chinese 23s modem firmware didn't fix my fp.
Enviado de meu Le X820 usando Tapatalk
niscrulez said:
Chinese 23s modem firmware didn't fix my fp.
Enviado de meu Le X820 usando Tapatalk
Click to expand...
Click to collapse
Try developers modem!
Fingerprint still not working
Hi,
Tried the 3 modem drivers (India and US) and FP still not working, did it die or is this normal? Have you found any other drivers? Searched here in XDA but didn't find any. After installation do we need any additional configuration? Thanks.
Regards,
Pedro.
Hi,
i´m on LineageOS 14.1 and the Dev Version MODEM_419D_V.00050.zip fixed the FP for me. THX
Borbovsky said:
Hi,
Tried the 3 modem drivers (India and US) and FP still not working, did it die or is this normal? Have you found any other drivers? Searched here in XDA but didn't find any. After installation do we need any additional configuration? Thanks.
Regards,
Pedro.
Click to expand...
Click to collapse
Wich ROM you use?
Not working on Lineage 14.1
Console Master0 said:
Wich ROM you use?
Click to expand...
Click to collapse
Hi, I installed the latest Lineage for the x2, they released the Official Nougat version
https://download.lineageos.org/x2
and as a ROM I like it a lot but the fingerprint sensor only worked the first time when I was configuring the phone, after that it stopped working like if it was dead. This was with US ROM 16s, India ROM 19s, LOS 13 and now LOS 14.
Regards,
Pedro.
---------- Post added at 16:48 ---------- Previous post was at 16:45 ----------
BigTiger said:
Hi,
i´m on LineageOS 14.1 and the Dev Version MODEM_419D_V.00050.zip fixed the FP for me. THX
Click to expand...
Click to collapse
Where can we download it? tnx
Look at the second post
Still dead
BigTiger said:
Look at the second post
Click to expand...
Click to collapse
Tnx, googled it and went to the same place where I downloaded the other but I had downloaded the ROMs the said worked for them. Still nothing... do we need to clear any cache afterwards? I'll try it...
Tnx,
Pedro.
---------- Post added at 17:45 ---------- Previous post was at 17:28 ----------
What is the diff between 413D and 419D? Developer Modems...
Also don't forget to make sure that 'Settings -> Security -> Quick unlock' is turned on if you are having trouble using your fingerprint or it won't work. I somehow had mine disabled and didn't notice that for a while.
Still dead
ccheney said:
Also don't forget to make sure that 'Settings -> Security -> Quick unlock' is turned on if you are having trouble using your fingerprint or it won't work. I somehow had mine disabled and didn't notice that for a while.
Click to expand...
Click to collapse
My build doesnt seem to have quick unlock option, tried removing pin and starting with fingerprint + pin configuration but still nothing... Maybe it was the HW that stopped working, tnx for the help.
Regards,
Pedro.
Borbovsky said:
My build doesnt seem to have quick unlock option, tried removing pin and starting with fingerprint + pin configuration but still nothing... Maybe it was the HW that stopped working, tnx for the help.
Click to expand...
Click to collapse
Ok, I'm using RR 5.8.3 w/open gapps which may be why its showing up for me.
I am using the RR 5.8.3 w open gapps as well and no combination of modems fix my FP, it will some times read but never enough before it times out during the setup. it worked when i first got the phone then never again...
Hello.
In am on pure Nexus project.
I own the x829 version
What modem version tot flash tot fix fingerprint scanner ?
chetermaat said:
Hello.
In am on pure Nexus project.
I own the x829 version
What modem version tot flash tot fix fingerprint scanner ?
Click to expand...
Click to collapse
I use the CN23, it works pretty well
Gladheid latest 23
Slay1991 said:
I use the CN23, it works pretty well
Click to expand...
Click to collapse
Hi. I flashed that one still not working.
---------- Post added at 12:04 PM ---------- Previous post was at 11:54 AM ----------
What developer modem should i use for my x829
The 413D OR the 419D ?
chetermaat said:
Hi. I flashed that one still not working.
---------- Post added at 12:04 PM ---------- Previous post was at 11:54 AM ----------
What developer modem should i use for my x829
The 413D OR the 419D ?
Click to expand...
Click to collapse
Check 419D,if that doesn't work for you it's a hardware issue
Related
Any one having same problem!! Having any solution to it!? And how can i calibrate it??
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??
Click to expand...
Click to collapse
This forum is intended to be for accessories only! Please ask in Q&A, there are already a ton of threads discussing your problem with solutions.
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??what is your rom?
Click to expand...
Click to collapse
rowihel2012 said:
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??what is your rom?
Click to expand...
Click to collapse
Stock cm12
Sent from my Moto G 2014 using XDA Labs
Click to expand...
Click to collapse
[email protected] said:
rowihel2012 said:
Stock cm12
Sent from my Moto G 2014 using XDA Labs
Click to expand...
Click to collapse
Fingerprint is working like a charm, in all ROMs.
It must be your hardware issue, take it in Service Center
Click to expand...
Click to collapse
No I also have issue with finger print in mokke and nuclerom 7.1
just flash zuk z1 cyanogenmod qfil flashable rom with qfil software.... your fingerprint sensor will work, definitely....
---------- Post added at 07:53 AM ---------- Previous post was at 07:48 AM ----------
this happens when you flash zui roms in zuk z1 , which is not preinstalled with ZUI. persist.mbn and rpm.mbn files are different in both the version. just flash cyanogen qfil rom..
download drivers:
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
http://www.androidbrick.com/downloa...one-usb-adb-qualcomm-diag-drivers-windows-10/
full guide and rom link is here:
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
after that unlock root and flash twrp recovery, and install lineageos or ressurection remix rom...fingerprint sensor will work definitely
[email protected] said:
Any one having same problem!! Having any solution to it!? And how can i calibrate it??
Click to expand...
Click to collapse
Hello guys I have found a solution ?
Just download and flash the firmware from the link given below........on top of your nougat roms....the fingerprint option will be present once you flash this firmware.
Note: Works on nougat roms don't know about Oreo roms
https://androidfilehost.com/?fid=24351979186684091
I think in nougat ROMs you can separately download nougat ham firmware zip.
crossmanx said:
just flash zuk z1 cyanogenmod qfil flashable rom with qfil software.... your fingerprint sensor will work, definitely....
---------- Post added at 07:53 AM ---------- Previous post was at 07:48 AM ----------
this happens when you flash zui roms in zuk z1 , which is not preinstalled with ZUI. persist.mbn and rpm.mbn files are different in both the version. just flash cyanogen qfil rom..
download drivers:
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
http://www.androidbrick.com/downloa...one-usb-adb-qualcomm-diag-drivers-windows-10/
full guide and rom link is here:
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
after that unlock root and flash twrp recovery, and install lineageos or ressurection remix rom...fingerprint sensor will work definitely
Click to expand...
Click to collapse
Is this the rom where we get cyanogen 12.1 watermark??
Gimana cara ngubah lenovo a1000 ke xiaomi note 4 x
[email protected] said:
Gimana cara ngubah lenovo a1000 ke xiaomi note 4 x
Click to expand...
Click to collapse
please use english and this is Zuk Z1 forum
How can i resolve it bro.....fibgerprint option has been disappeared from settings
mohith_23 said:
How can i resolve it bro.....fibgerprint option has been disappeared from settings
Click to expand...
Click to collapse
Please read both pages, answers are already given.
This was the reason I gave away this phone as the fingerprint homebutton is just a design flaw. not quite sure if you can get a replacement from AliExpress
I have the same issue.
It might be due to an installation of ZUI way back in time when i accidently bricked my phone. Guess the fingerprint isn't working anymore till then (it worked before for sure on Lineage OS 14.1).
What I tried so far:
1) I installed the firmware file from AOSP-Extended from https://forum.xda-developers.com/zuk-z1/orig-development/rom-aospextended-rom-v5-0-t3720542 and AOSP-Extended Oreo. But the fingerprint didn't work.
2) I installed then AOSP-Extedend Pie but no different result.
3) I used QFIL to install cm-12.1-YOG4PAS3AJ-ham-20151021-qpst from here http://lenovo-forums.ru/topic/19190-zuk-z1-qpst-cm-121-yog4pas3aj-ham-signed-factory-e66b382c5e/ becuase the link provided on site 1 links to androidbrick where the link to the rom doesnt work anymore. Unfortunately QFIL didn't solve the issue.
4) Then I tried flashing Lineage OS 14.1 and flashing the ham-mm-firmware from here https://androidfilehost.com/?fid=817906626617950254 which didn't work too.
5) I used QFIL to install Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729_qpst from here https://androidfilehost.com/?fid=24052804347826528 but the fingerprint couldn't be configured there too.
6) I tried installing ZUI_1.6.384_ST_160518_qpst from here http://lenovo-forums.ru/topic/19189-zuk-z1-qpst-z1_cn_open_user_q44301_m_zui_16384_st_160518/ but sadly the result was the same.
7) I tried using restor-capacitive-button from here https://androidfilehost.com/?fid=24269982087009655 and again no change.
Im pretty sure it's not a hardware defect because I really don't know how that should have happened.
Is there anything else I could do?
Hi, my friends.
Here is the first EUI 5.9 ROM for our X720, stable 20s BETA DEV version.
Until now, all stock ROMS are EUI 5.8 based, and this beta for developers are very stable.
Changelog:
- All chinese apps erased.
- Installed Play Store.
- Installed Google Now and Google Voice Search.
- Contacts and Calendar synchronitazion with Google account.
- Change splash to english boot up text.
- Google boot up animation.
- Some tweaks for better perfomance and battery.
I unistall stock browser, please installl from Play Store your favourite browser (Chrome, Firefox, etc.)
Download link:https://www.amazon.es/clouddrive/share/lRzZHeAEGUbExSHDvm3VKQ0xlGZ5jdRBvATjadXgYxz?ref_=cd_ph_share_link_copy
And I make a small radio files 5.9 updated, not included into T.A.R.S. If you want, update it flashing in TWRP. Only 5 seconds are installed, and the reboot automatically.
Updatr radio 5.9 files link: https://www.amazon.es/clouddrive/share/jvkTwNQQheQD1PA5j4Hsz7DX3leyhSqV5V7LvT1cESt?ref_=cd_ph_share_link_copy
Enjoy !!!!
Awesome, will flash and let u know.
Thanks for all the effort.
Nougat?
Sent from my Nexus 6P using Tapatalk
Seems like many features such as night mode, fingerprint gestures are missing still as it in BETA version.
Other-than that, the ROM is running smoothly.
---------- Post added at 02:31 PM ---------- Previous post was at 02:30 PM ----------
darkobas said:
Nougat?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Still 6.0.1
darkobas said:
Nougat?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
hopefully, my friend :crying:
Manyfacegod said:
Seems like many features such as night mode, fingerprint gestures are missing still as it in BETA version.
Other-than that, the ROM is running smoothly.
---------- Post added at 02:31 PM ---------- Previous post was at 02:30 PM ----------
Still 6.0.1
Click to expand...
Click to collapse
There is another DEV version with some of this feature, and multiview, but very unstable. Yesterday I was working on it.
We will wait a little.
Was using the 5.8.20s installed this out, congratulations for the incredible work rom
good afternoon. a beta 20S of January 5, 2017 or on December 22, 2016?
Pashacvet said:
good afternoon. a beta 20S of January 5, 2017 or on December 22, 2016?
Click to expand...
Click to collapse
I dont understand your question
STEVE_MARS said:
Hi, my friends.
Here is the first EUI 5.9 ROM for our X720, stable 20s BETA DEV version.
Until now, all stock ROMS are EUI 5.8 based, and this beta for developers are very stable.
Changelog:
- All chinese apps erased.
- Installed Play Store.
- Installed Google Now and Google Voice Search.
- Contacts and Calendar synchronitazion with Google account.
- Change splash to english boot up text.
- Google boot up animation.
- Some tweaks for better perfomance and battery.
I unistall stock browser, please installl from Play Store your favourite browser (Chrome, Firefox, etc.)
Download link:https://www.amazon.es/clouddrive/share/lRzZHeAEGUbExSHDvm3VKQ0xlGZ5jdRBvATjadXgYxz?ref_=cd_ph_share_link_copy
And I make a small radio files 5.9 updated, not included into T.A.R.S. If you want, update it flashing in TWRP. Only 5 seconds are installed, and the reboot automatically.
Updatr radio 5.9 files link: https://www.amazon.es/clouddrive/share/jvkTwNQQheQD1PA5j4Hsz7DX3leyhSqV5V7LvT1cESt?ref_=cd_ph_share_link_copy
Enjoy !!!!
Click to expand...
Click to collapse
Any Bugs identified. All in working condition.. Can I flash ??
Will it work without applying radio update after flashing ROM on x720? Or radio update is must?
I flashed it. It is very smooth and looks nice. Is there a way to turn off the time in the status bar from acting like a power button? I keep pressing it each time I swipe down for notification lol.
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
dark_prince said:
Will it work without applying radio update after flashing ROM on x720? Or radio update is must?
Click to expand...
Click to collapse
I'm on x727 model but I didn't flash modem/radio and cellular worked for me.
STEVE_MARS said:
I dont understand your question
Click to expand...
Click to collapse
there was several Beta of versions. beta 20S of January 5, 2017 and December 22, 2016.
http://bbs.ydss.cn/forum-le_x720-1.html the site administrator periodically spreads them in a network.
STEVE_MARS said:
Hi, my friends.
Here is the first EUI 5.9 ROM for our X720, stable 20s BETA DEV version.
on what beta the firmware is made?of what date beta?
Click to expand...
Click to collapse
The official 5.9.20s has arrived
http://bbs.le.com/zt/eui/le_pro3.html
Now waiting for ur version of the ROM.
Hi, I flashed this rom on my LEX720, it's pretty good so far no issue. You need to flash the update radio as well, if not sim not detect I think.
Fast, good battery life, some enhancements from last Steve rom I think, just been few days using it, thanks you.
Moon75 said:
Hi, I flashed this rom on my LEX720, it's pretty good so far no issue. You need to flash the update radio as well, if not sim not detect I think.
Fast, good battery life, some enhancements from last Steve rom I think, just been few days using it, thanks you.
Click to expand...
Click to collapse
Flashing updated radio is not necessary, radio will work without flashing that too.
Manyfacegod said:
Flashing updated radio is not necessary, radio will work without flashing that too.
Click to expand...
Click to collapse
hi, thank you but it didn't detect my sim card when it boot first time for setup. I flashed radio and it works, everything is working now so it's ok for me no big deal.
Ascertion said:
I flashed it. It is very smooth and looks nice. Is there a way to turn off the time in the status bar from acting like a power button? I keep pressing it each time I swipe down for notification lol.
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
I'm on x727 model but I didn't flash modem/radio and cellular worked for me.
Click to expand...
Click to collapse
Is this update Android 7(nougat)?
Moon75 said:
hi, thank you but it didn't detect my sim card when it boot first time for setup. I flashed radio and it works, everything is working now so it's ok for me no big deal.
Click to expand...
Click to collapse
i flashed the rom without flashing the 5.9 radio, and it works perfectly for me.
---------- Post added at 06:24 AM ---------- Previous post was at 06:23 AM ----------
seffmono said:
Is this update Android 7(nougat)?
Click to expand...
Click to collapse
No still on 6.0.1
Hi guys,
I'm having a super slow gps fix no matter what i try
1. Flash latest or stable firmware
2. Edit gps.conf
The slow is like i takes almost 5 mins to get a 3D Fix or locked position.
But i notice this happen since nougat build. Miui official on marshmallow work extremely fast to get a fix. But whenever i use custom rom like NOS Oreo or Nougat, LOS Oreo or Nougat and also MIUI Nougat (Epicrom) Latest 9.x still have this issues
Im on Kate, official unlocked bootloader. I wonder is there any method i can try?
Any reply will be thanks:highfive:
Regards,
Darren Lim
Here attached with the Gps test. Everything in view but does get a 3D lock (No Fix)
darrenlimch said:
Hi guys,
I'm having a super slow gps fix no matter what i try
1. Flash latest or stable firmware
2. Edit gps.conf
The slow is like i takes almost 5 mins to get a 3D Fix or locked position.
But i notice this happen since nougat build. Miui official on marshmallow work extremely fast to get a fix. But whenever i use custom rom like NOS Oreo or Nougat, LOS Oreo or Nougat and also MIUI Nougat (Epicrom) Latest 9.x still have this issues
Im on Kate, official unlocked bootloader. I wonder is there any method i can try?
Any reply will be thanks:highfive:
Regards,
Darren Lim
Click to expand...
Click to collapse
Same issue here
---------- Post added at 02:41 PM ---------- Previous post was at 02:40 PM ----------
Did you fix it
tom jp said:
Same issue here
---------- Post added at 02:41 PM ---------- Previous post was at 02:40 PM ----------
Did you fix it
Click to expand...
Click to collapse
Yes for now. Yesterday just discovered a new method. In testing stage will release once fully tested
darrenlimch said:
Yes for now. Yesterday just discovered a new method. In testing stage will release once fully tested
Click to expand...
Click to collapse
How?
Can you tell me, I will test it too
Kinda have the same issue, so please post the fix if you find it.
tom jp said:
How?
Can you tell me, I will test it too
Click to expand...
Click to collapse
Ethelwald said:
Kinda have the same issue, so please post the fix if you find it.
Click to expand...
Click to collapse
NOS have a new update on (24th) , and the chg log mentioned there is something chg related to gps, u guys tested? Gonna release the fix soon. The reason i haven't release is because it might cost lost to imei. I try to find a method to prevent that. And need more testing. So plesde be patient ya
Just flashed lates NOS build and GPS is in fact much better, but probably need more testing.
asakurato said:
Just flashed lates NOS build and GPS is in fact much better, but probably need more testing.
Click to expand...
Click to collapse
Which build (date)
tom jp said:
Which build (date)
Click to expand...
Click to collapse
January 24 build, but About phone for some reason says January 19
Kinda fixed
darrenlimch said:
Hi guys,
I'm having a super slow gps fix no matter what i try
1. Flash latest or stable firmware
2. Edit gps.conf
The slow is like i takes almost 5 mins to get a 3D Fix or locked position.
But i notice this happen since nougat build. Miui official on marshmallow work extremely fast to get a fix. But whenever i use custom rom like NOS Oreo or Nougat, LOS Oreo or Nougat and also MIUI Nougat (Epicrom) Latest 9.x still have this issues
Im on Kate, official unlocked bootloader. I wonder is there any method i can try?
Any reply will be thanks:highfive:
Regards,
Darren Lim
Click to expand...
Click to collapse
My GPS started working properly,
I did try flashing firmwares but didn't help. I flashed full stock rom(global Dev 8.1.18) and then flashed cosmic os and now having no issues with GPS.(I also use GPS status and toolbox).
I haven't tried nos
tom jp said:
My GPS started working properly,
I did try flashing firmwares but didn't help. I flashed full stock rom(global Dev 8.1.18) and then flashed cosmic os and now having no issues with GPS.(I also use GPS status and toolbox).
I haven't tried nos
Click to expand...
Click to collapse
Yes i did know this method works., But if u dirty flash an update again ur gps will broke. So u need redo again everything from beginning. It's no a good method tho but it work ?
Dug up the Github commit, here's the dev's quote:
https://github.com/nitrogen-project...mmit/5a9e84251696bb48e8fe184784226604efdf6f6c
[haggertk]:
* During bring-up of O, GPS was exhibiting different behavior from
N -- an appropriate number of satellites would immediately lock,
but a fix would not resolve for 30-90 seconds. Digging up this
change from the L-era allows GPS to resolve a fix in a nominal
amount of time.
Click to expand...
Click to collapse
Hi guys,
Any progress on this issue? Anyone tried latest NOS maybe? I switched back from NOS Oreo to NOS Nougat because of this...
Ok guys,
Please take note this will make u lost your IMEI somehow mine is missing but i did have a backup so i can restore it anytime. Without IMEI it doesn't affect me at all.
This method is weird so, backup before you do it. Not responsible for anything happen
1) boot into FASTBOOT
2) connect to computer use ADB and key in this
fastboot flash modem NON-HLOS.BIN
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
The nonhlos.bin can be found inside a official miui rom and flashing the non hlos is not necessary.
Test your gps after that it should work. Please report back
I fixed gps problem by installing F-Droid,than GPSfix extension,selected my country and voila...When u're in house etc. or when its clody weather its hard for GPS for 3D fix. Btw Im on Cardinal latest Oreo 8.1 build and 8.1.11 miui firmware.
IrishBoy94 said:
I fixed gps problem by installing F-Droid,than GPSfix extension,selected my country and voila...When u're in house etc. or when its clody weather its hard for GPS for 3D fix. Btw Im on Cardinal latest Oreo 8.1 build and 8.1.11 miui firmware.
Click to expand...
Click to collapse
or even better just download "GPS fix" from google play and press start fix and let it for 10 mins.
jimakos98 said:
or even better just download "GPS fix" from google play and press start fix and let it for 10 mins.
Click to expand...
Click to collapse
This method doesn't work. And it only work for one days. And ppl like me have no time to wait for it to fix before moving
Some ppl lucky enough that they dont even have any bugs. I actually suspect its hardware compatibility issues. Blame xiaomi for that maybe? Hahaha
simple, use Device only as agps given problem often (depend on the agps mood?).
I also removed miui built in compass as it shown compass accuracy high to low from gps test app (suspect this causing the gps locking issue too).
now waze locking every time within few seconds.
irontech said:
simple, use Device only as agps given problem often (depend on the agps mood?).
I also removed miui built in compass as it shown compass accuracy high to low from gps test app (suspect this causing the gps locking issue too).
now waze locking every time within few seconds.
Click to expand...
Click to collapse
I assume you are talking bout miui in nougat. So you mean after u disable compass and use device only mode the gps jssues is fixed?
Hi all,
Has anyone tried Lineage OS Beta 4 of the Open Kirin Website with the Mate 10 Pro L29?
Would be interested in a comparison with EMUI as now apparently most of the bugs are resolved (camera etc.)
Would be interested in this as well
030basti said:
Hi all,
Has anyone tried Lineage OS Beta 4 of the Open Kirin Website with the Mate 10 Pro L29?
Would be interested in a comparison with EMUI as now apparently most of the bugs are resolved (camera etc.)
Click to expand...
Click to collapse
Why don't you try it and report back ?
No
snachez said:
Why don't you try it and report back ?
Click to expand...
Click to collapse
If someone can link me to a full flashable EMUI ROM that I can go back to if I don't like Lineage, I would be happy to be the guinea pig.
NFC doesn't seem to be working?
Yep seems not working
Tapatalk
Hello .. i flashed it on my Mate 10 Lite .. the rom is pretty smooth and reliable .. flashed it through TWRP .. everything seems to be working .. but same as carbon the portrait and wide aperture doesn't work .. the camera just hangs until you turn them off .. front cam doesn't save pictures when beauty mode is on .. other than that it's pretty good for a beta release .. i don't know about NFC though as my device doesn't support it .. give it a shot .. and by the way .. you should use HURUPDATER method for returning to stock EMUI .. i use it and it's working like a charm for me .. going to check for bugs even deeper .. give it a shot !
NFC is no go with Los. Tried Carbon out, it has NFC so may stick to Carbon in the mean time.
Tumpster said:
No
If someone can link me to a full flashable EMUI ROM that I can go back to if I don't like Lineage, I would be happy to be the guinea pig.
Click to expand...
Click to collapse
You dont need one, flashing los only changes system partition meaning you only need to backup your own system.img , if you dont like los flash your emui system back and your good to go
---------- Post added at 12:55 PM ---------- Previous post was at 12:53 PM ----------
The only issues are nfc and that some of the camera gimmicks do not work but for regular point and shoot it's same quality as stock
ngoralph said:
You dont need one, flashing los only changes system partition meaning you only need to backup your own system.img , if you dont like los flash your emui system back and your good to go
---------- Post added at 12:55 PM ---------- Previous post was at 12:53 PM ----------
The only issues are nfc and that some of the camera gimmicks do not work but for regular point and shoot it's same quality as stock
Click to expand...
Click to collapse
How is battery life on the LOS?
I'm more interested in hearing how does this ROM excels the Stock EMUI?
ngoralph said:
You dont need one, flashing los only changes system partition meaning you only need to backup your own system.img , if you dont like los flash your emui system back and your good to go
---------- Post added at 12:55 PM ---------- Previous post was at 12:53 PM ----------
The only issues are nfc and that some of the camera gimmicks do not work but for regular point and shoot it's same quality as stock
Click to expand...
Click to collapse
Best method to backup? TWRP?
Tumpster said:
Best method to backup? TWRP?
Click to expand...
Click to collapse
no don't even install twrp
use this method to backup system.img
backup
---------- Post added at 12:15 AM ---------- Previous post was at 12:12 AM ----------
itsdan313 said:
How is battery life on the LOS?
Click to expand...
Click to collapse
consistent 6hrs sot for me
Works fine for me, Mate 10 Pro (BLA-29).
Anyone knows how to root this system? Tried LOS 15.1 su addon, but did not work.
Also why when I browse ./system folder under TWRP, this folder is empty?
Edit:
I've installed Magisk, works fine.
And for TWRP, I suggest installing Unofficial by @Pretoriano80. Now I can see content properly and also access to all partitions works fine.
taddzio said:
Works fine for me, Mate 10 Pro (BLA-29).
Anyone knows how to root this system? Tried LOS 15.1 su addon, but did not work.
Also why when I browse ./system folder under TWRP, this folder is empty?
Edit:
I've installed Magisk, works fine.
And for TWRP, I suggest installing Unofficial by @Pretoriano80. Now I can see content properly and also access to all partitions works fine.
Click to expand...
Click to collapse
I thought pretoriano twrp didn't work with custom roms. I normally get stuck in the splash screen screen of twrp.
Did you do anything special for it to work?
Carbon,Lineage, or Resurrection? Any opinions on the matter?
Tumpster said:
Carbon,Lineage, or Resurrection? Any opinions on the matter?
Click to expand...
Click to collapse
I ask the same. Which is the killer feature of each of them?
bihariel said:
I thought pretoriano twrp didn't work with custom roms. I normally get stuck in the splash screen screen of twrp.
Did you do anything special for it to work?
Click to expand...
Click to collapse
pretoriano twrp loads ok for me, but I had problems with some partitions - couldn't mount system in write mode and other errors.
Official twrp, works on with LOS, but I have one problem - cant write Cache partition...
Tumpster said:
Carbon,Lineage, or Resurrection? Any opinions on the matter?
Click to expand...
Click to collapse
superandroid2011 said:
I ask the same. Which is the killer feature of each of them?
Click to expand...
Click to collapse
I only tried Lineage and Resurrection. Lineage seems smoother to me, Resurrection does have some more customisations but I switched back to Lineage.
Did anyone tried installing gcam on this lineage?
Is it working properly?
Tumpster said:
Carbon,Lineage, or Resurrection? Any opinions on the matter?
Click to expand...
Click to collapse
RR if you want tons of customization in your rom (some customization are not working properly)
Lineage for more stability
And carbon for something in between both of them
SYRIANA_PIE ANDROID 9.0
WHAT IS SYRIANA_PIE?
it`s asop based on phh_treble_arm64_ab v104 including Gapps, Magisk 17.1 and all the fixes to get treble android pie more stable , tweaked ,moded,clean and mix asop without any extras
Download link:
Syriana_Pie V1.0
Notice1:
Dont use Developer settings - then MTP will be buggy.
to get Enhanced 4G LTE Mode install ims.apk (( should fix VOLTE as well "not tested cuz my sims not soppurted" ))
INSTALLATION
required :
1- unlocked bootloader
2- ADB and fastboot
3- enable usb debugging in developer settings.
4- clean flash (( formate data))
5- use those commands
Code:
adb shell
Code:
reboot bootloader
now we flash it
Code:
fastboot flash system Syriana_pie_v1.0.img
then
Code:
fastboot reboot
What Is Working In Syriana_Pie ?
everthing working as a charm except hotspot (still working on it )
this rom tested on Nokia6.1 Nokia8 Nokia7plus and Upro
working on A/B devices only
Changelog
Code:
-fixed MTP
-Fixed NFC
-fixed gcam and stock pie cam
-fixed dark mode
-Adaptive brightness and Ambient display
-magisk v17.1 with latest version of magisk manager
-Pixel launcher and Quick step Launcher with swip up on home button gesture
-tweaked for better internet speed,performance,gaming,and battery life
-updated all gapps
-and alot more
- 100%Stable for daily use.
Special Thanks goes to:
phhusson for his great job and Open Source Code
Contributors
Maherabed1986
ROM OS Version: 9.x Pie
ROM Kernel: Linux4.4
Based On: AOSP
Version Information
Status: Stable and very smooth
Created 2018-09-17
:good:
Screen Shots
Great job dev! So good to see at least a stable pie gsi.
Btw i had few questions, first is native video calling from dialer working ? Next any heating or excessive heating issues? Will there be furthur future updates?
raza_maestro said:
Great job dev! So good to see at least a stable pie gsi.
Btw i had few questions, first is native video calling from dialer working ? Next any heating or excessive heating issues? Will there be furthur future updates?
Click to expand...
Click to collapse
No heating issue nativ vedio calling there but I didn't test it
Maherabed1986 said:
No heating issue nativ vedio calling there but I didn't test it
Click to expand...
Click to collapse
Nice. What about future updates? Will you be actively making it better?
raza_maestro said:
Nice. What about future updates? Will you be actively making it better?
Click to expand...
Click to collapse
Sure I'll do my best I wanna collect the user feedback then I'll improve it to make sure all satisfied with this rom
Maherabed1986 said:
Sure I'll do my best I wanna collect the user feedback then I'll improve it to make sure all satisfied with this rom
Click to expand...
Click to collapse
Good to hear that buddy. Thanks again for the rom.
raza_maestro said:
Good to hear that buddy. Thanks again for the rom.
Click to expand...
Click to collapse
You're most welcome my friend
Great job. Thxi i have als somet questions. How about battery life? This rom is for al TA..... versions . And The camera is not laggy?.
EricH7001 said:
Great job. Thxi i have als somet questions. How about battery life? This rom is for al TA..... versions . And The camera is not laggy?.
Click to expand...
Click to collapse
It worth a try everything working no lag no issues so I need your feedback to improve it more and more
Battery life for me much better than Oreo camera not laggy
Amazing ! Very thanks for share, I will test when will have free time to configure all.
FM radio working?!?
Magister54 said:
FM radio working?!?
Click to expand...
Click to collapse
No sir it's not important for me
Please, someone that have installed this rom tell how is going. A little review. :highfive:
What about USB tethering for using the internet on a laptop?
cmaxwe said:
What about USB tethering for using the internet on a laptop?
Click to expand...
Click to collapse
Working
Flashing on my TA-1016 (fingers crossed!)
---------- Post added at 12:37 PM ---------- Previous post was at 12:21 PM ----------
cmaxwe said:
Flashing on my TA-1016 (fingers crossed!)
Click to expand...
Click to collapse
Doesn't recognize my SIM since my phone is a single SIM variant.
Any ideas?
Is this just something in the build.prop?
---------- Post added at 01:32 PM ---------- Previous post was at 12:37 PM ----------
cmaxwe said:
Flashing on my TA-1016 (fingers crossed!)
---------- Post added at 12:37 PM ---------- Previous post was at 12:21 PM ----------
Doesn't recognize my SIM since my phone is a single SIM variant.
Any ideas?
Is this just something in the build.prop?
Click to expand...
Click to collapse
Hmm... I am in a bit of a position now.
Can't figure out how to get it to recognize my SIM and if I switch back to my "current-slot" = "b" my phone isn't booting past the Nokia screen.
Might have just effectively made my phone a wifi-only device... :-/
My IMEI is correct for the SIM 1 slot. So that is good news probably....
cmaxwe said:
Flashing on my TA-1016 (fingers crossed!)
---------- Post added at 12:37 PM ---------- Previous post was at 12:21 PM ----------
Doesn't recognize my SIM since my phone is a single SIM variant.
Any ideas?
Is this just something in the build.prop?
---------- Post added at 01:32 PM ---------- Previous post was at 12:37 PM ----------
Hmm... I am in a bit of a position now.
Can't figure out how to get it to recognize my SIM and if I switch back to my "current-slot" = "b" my phone isn't booting past the Nokia screen.
Might have just effectively made my phone a wifi-only device... :-/
My IMEI is correct for the SIM 1 slot. So that is good news probably....
Click to expand...
Click to collapse
Could you solve that ?
neodante said:
Could you solve that ?
Click to expand...
Click to collapse
Not yet.
I moved my SIM over to another phone for now.
Downloading the World Wide firmware and am going to try to flash that to my TA-1016.
With any luck that will get me back to stock and working SIM.