Related
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully rooted the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)'
I have no idea what to do next can someone help me.
I have tried what this thread suggests:
bump
same as u..but differ phone model.(N9589)
had a few upgrd...til the recent brick it.
Tried a few version of flash tool and still the same
Joshafc said:
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully rooted the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)'
I have no idea what to do next can someone help me.
I have tried what this thread suggests:
Click to expand...
Click to collapse
Same problem here - tried to install stock firmware and got this error...
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
tukulll said:
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
Click to expand...
Click to collapse
Thank you for your reply, but this doesn't help... ;(
Anyone?
I think I figured out that the error above means you are trying to flash an incorrect ROM. Make sure you are using the right one and also make sure you're using the latest version of sp flash tool.
Once I downloaded a later version of the flash tool it began installing the ROM but then a different error appeared.
So I formatted the nand with the sp flash tool.
Then I flashed the stock ROM again and it worked
Formatting it seemed to make the errors go away even though its advised not to do so.
Sent from my iOCEAN X7 using xda app-developers app
vessk0 said:
Anyone?
Click to expand...
Click to collapse
I fixed this error by completely removing and reinstalling other drivers for mtk vcom loader
anyone heard Iocean will recall all of the x7 elite's? i've had a mail today they should do it, but i don't know if it's true or not.
Schumi_wk said:
anyone heard Iocean will recall all of the x7 elite's? i've had a mail today they should do it, but i don't know if it's true or not.
Click to expand...
Click to collapse
I haven't heard about that. Maybe its a fake email. Did it say what the fault was?
Joshafc said:
I think I figured out that the error above means you are trying to flash an incorrect ROM. Make sure you are using the right one and also make sure you're using the latest version of sp flash tool.
Once I downloaded a later version of the flash tool it began installing the ROM but then a different error appeared.
So I formatted the nand with the sp flash tool.
Then I flashed the stock ROM again and it worked
Formatting it seemed to make the errors go away even though its advised not to do so.
Sent from my iOCEAN X7 using xda app-developers app
Click to expand...
Click to collapse
How to format the nand with sp flash tool, I use the latest version?
And can you point me to good original stock ROM?
Thank you!
lolet said:
I fixed this error by completely removing and reinstalling other drivers for mtk vcom loader
Click to expand...
Click to collapse
I tried reinstalling drivers, also tried other drivers, but this doesn't help...
I've had the same problem with the following installation Sp Tools
SP_Flash_Tool_exe_v3.1316.0.150
Rom: MP_mt89_v9_iocean_ousheng_jb2_20130520-184014_zhongyeqing_PC
http://d-h.st/ESX
Iocean X7 Youth
I don't have the same problem but i flashed the latest version of official rom for iOcean x7 Youth : 03 july 2013 : and wtf no more internal sdcard only the rom stockage. So i can't download anything, i can't use camera .
On the official website, I read that before flashing the 20 may 2013 rom one and the 03 July 2013 one, your baseband version have to be 23/04 or higher( you have to flash the 23/04 official rom first). This is only avalaible for the YOUTH version.
So tomorrow i will try what i said below to see if i have internal sd card again.
noob question::: since the iocean x7 young and turbo are the same phones...only different clock rates...will flashing the firmware for turbo on iocean x7 young work??assuming that the mtk6589T and mtk6589 are the same chipset only different clock rates??
Micromax A116 (Cant flash Rom)Brick Problem Solved
tukulll said:
these are common problems when flashing MT65xx based phones,
ie : error 4008, 4xxx, 5xxx whatever those codes mean, no explanation after extensive search on google.
once I managed to flash this one phone successfully, but I don't know exactly what I did.
as long as I recall, I tried to delete the whole flashtool folders, re-extract them, let the phone cool down a bit
and oh, try to press volume up, or down button (varies on devices) while connecting to USB, once the flashing progress bar starts, release the button.
In the flashtool option, at the OPTIONS-->DA DOWNLOAD ALL-->, check WITHOUT BATTERY.
and in the option, DA DOWNLOAD ALL--> SPEED, check DO NOT SWITCH SPEED.
try flashing your phone without battery inserted, it works many times for me.
NOTE : BEWARE, flashing your MTK65xx based phone, sometimes this tool tried to REMOVE YOUR PHONE's IMEI information, so take caution !
I haven't managed how to prevent IMEI removal when flashing those phones, because I'm not a developer.
Hope this helps.
Click to expand...
Click to collapse
Thanks a lot. My Micromax a116 was brick. Now its alive.
Here I am with the same problem in a N920e... AND IT'S NOT MINE! :crying:
I'll have to pay it to the owner if I can't solve this:
DaniPhii said:
Here I am with the same problem in a N920e... AND IT'S NOT MINE! :crying:
I'll have to pay it to the owner if I can't solve this:
View attachment 2243401
Click to expand...
Click to collapse
Clearly: Wrong driver. I had also this error. SPflash tool did not readback. I did not flash anything! I fixed this by showing the nonpresent devices in devicemanagement (google for show nonpresent devices for explanation)
Go to com ports, and delete all mediatek drivers except preloader driver. Now start over. It can help if you choose the same usb port where you had success last time.
SP flash tool shows in the statusbar which driver it is using.
mistraller said:
Clearly: Wrong driver. I had also this error. SPflash tool did not readback. I did not flash anything! I fixed this by showing the nonpresent devices in devicemanagement (google for show nonpresent devices for explanation)
Go to com ports, and delete all mediatek drivers except preloader driver. Now start over. It can help if you choose the same usb port where you had success last time.
Click to expand...
Click to collapse
Yes, you got it
SP Flash Tool couldn't find my phone, but now it works
It's exactly a windoze driver problem.
Going to devicemanagement, in LAN-Devices I a had an Alcatel device,
chosing driver by hand and use the mtk usb driver, now Flashtool finds the phone
Thanks a lotttttttt....
shiv.kbh said:
Thanks a lot. My Micromax a116 was brick. Now its alive.
Click to expand...
Click to collapse
Thanks a lot man i unbricked my bolt a58 with this...thanks thanks...
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Sp flash tools - formatted android phone
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
naxilla100 said:
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
Click to expand...
Click to collapse
Same case here but ny device boot, its just doesn't have an operating system as it is formatted
aliranan8 said:
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Click to expand...
Click to collapse
same case here , after formatting , phone won't power on or can't be detected by sp flash tools , please please please , even if i connect a charger it is still not charging , is there hope for my dead phone? my phone is a110
Give it to customer care or flash factory image
Sent from my One V using Tapatalk
phone revived
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Same Problem
I have also the same case and given to service center. I am afraid whether service center will consider it under warranty.
BTW, how did you revive your phone ? I am interested to know.
I have XOLO Q700.
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
How?
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
hey gay i saw your post saiyng that your phone is revived? how you got it? i have a phone dead for sp tools and want to reive it.
wt***
I have the same problem guys I just flash my spice dream uno (android one) with sp flash tool after the flashing my phone is not booting up even now s.p. flasher is not searching my phone.......................
what i have try
1. reinstall drivers.
2. reinstall sp flash tool
3. try it with battry and with out it
4.try to flash it with out virson of s.p. flash tool
5. use new data cabal
but nothing is working
if any one know how to resolve it please help us
:crying::crying: :crying: :crying: :crying:
i formated my intex aqua i5 by the sptools now my phone not detected in sp flash tool through usb i cant find a way to install a firmware again.
please help me ...........................
Hi guys, i've just buy a redmi note 4 and i've found an horrible custom rom on it, so i've decided to flash a china dev with sp flash tool, but following a guide i also did the format, now the phone is dead totally, but the pc windows 10 64 bit still recognize it in meta mode when i plug it, and also flash tool still recognize it,but when i try to flash i got brom error preload there is someone that can help me to resuscitate my phone?
thank you so much!
Pier
When you have flashed, did you uncheck the preloader?
tamagon76 said:
Hi guys, i've just buy a redmi note 4 and i've found an horrible custom rom on it, so i've decided to flash a china dev with sp flash tool, but following a guide i also did the format, now the phone is dead totally, but the pc windows 10 64 bit still recognize it in meta mode when i plug it, and also flash tool still recognize it,but when i try to flash i got brom error preload there is someone that can help me to resuscitate my phone?
thank you so much!
Pier
Click to expand...
Click to collapse
Horrible custom rom? Ummm which one?
I couldn't do anything, PayPal accepted to give the money back cause they didn't say any where that the software wasn't original.
Thanks to anyone
this phone use mt6739.so i want to flash it the twrp to my phone.i dunno to unlock the bootloader but the twrp file not have for this device.
I just saw this post as I too have a Honor 7S
There is NO TWRP for our device.
The TWRP for the Honor 7A/7C/7X and Honor 7 doesn't work on our device and you got to pay 4 euros to unlock the bootloader before you can even flash TWRP (and there isn't one)
This Device is treble compatible but now I've found out there is zero development and no Devs Interested in it it's a complete and utter waste of time and has gone back into its box, never to be seen again.
hi there, I get this phone recently (because is old) and I created twrp for i,t so here it is, if you want some fun
you can flash it via flashtool on locked bootloader in to boot partition and after that you push twrp.img via adb to internal storage and flash it in to erecovery and recovery slot, and you are good to go
Samuel Ladziansky said:
hi there, I get this phone recently (because is old) and I created twrp for i,t so here it is, if you want some fun
you can flash it via flashtool on locked bootloader in to boot partition and after that you push twrp.img via adb to internal storage and flash it in to erecovery and recovery slot, and you are good to go
Click to expand...
Click to collapse
Hi I have a problem. I'm having brom issues in trying to flash it
Hi
I thinking you dont have "Authentication file" so you using "mtksecurebootdisabler",
so you need patch your drivers with libusb "patch".
Try this one, for me it works.
So open libusb that you install.
connect your honor7s to the pc with disconnected batery and hold volume down.
in patch option select your usb mtk device "idk how is called" and patch it
after patching reconnect phone and it will works.
usab1oy said:
Hi I have a problem. I'm having brom issues in trying to flash it
Click to expand...
Click to collapse
and little hint
dont flash whole rom if the phone can boot becasue after clean flash "format+download"
you lost log and cust partition because the image files are not secureboot signed and your phone get in to bootloop
and also you lost imei codes so no cellular after that
If you do so
you can fix it in that recovery were I enabled option to format log partition
after you format log to ext4, your phone will boot but without huawei/honor bootanimation
you dont need to worry about cust partition, if you didnt format it it still boot but without bootanimation and you lost some of garbage apps that are in that partition (amazon etc...)
(twrp boots in russian language, idk for now how to change it to boot in english or slovak lanuage (because Im from slovakia) and also it have Lenovo Logo becasuse I use sources from Lenovo A5 that have same cpu)
I will make in future separated thread for this....
Thanks alot for this.. I don't know maybe I should try the disconnected battery. But from a yt link I saw
The link : Honor 7s Dua-Al000
I wonder how his worked
I'll have to know how to disconnect the battery thou. I'm a noob at this.
Samuel Ladziansky said:
Hi
I thinking you dont have "Authentication file" so you using "mtksecurebootdisabler",
so you need patch your drivers with libusb "patch".
Try this one, for me it works.
So open libusb that you install.
connect your honor7s to the pc with disconnected batery and hold volume down.
in patch option select your usb mtk device "idk how is called" and patch it
after patching reconnect phone and it will works.
Click to expand...
Click to collapse
Sorry for the noob question but after patching with the battery disconnected. When I want to use spflash tools would I still use disconnect the battery to flash the recovery and co.
usab1oy said:
Sorry for the noob question but after patching with the battery disconnected. When I want to use spflash tools would I still use disconnect the battery to flash the recovery and co.
Click to expand...
Click to collapse
you can patch it or flash it without disconecting the battery
Here is how:
turn it off
Push and hold volume down
While holding volume down connect usb cable
But is recomended to disconect battery because the phone can boot up instead to go in flash mode.
usab1oy said:
Thanks alot for this.. I don't know maybe I should try the disconnected battery. But from a yt link I saw
The link : Honor 7s Dua-Al000
I wonder how his worked
I'll have to know how to disconnect the battery thou. I'm a noob at this.
Click to expand...
Click to collapse
Well he did with the battery and he add more steps that are not necessary for flashing, like scanning for COM port etc...
When I first try flash my 7s I download flashtool and didn't change any settings, I just load the rom and flash it.
So you must try to find your best way how to do and I will help you
And I wonder how he can flash the Log and Cust partition via flashtool, Maybe he have unlocked bootloader or something
Update: he have in the video description link for "lib usb" but didn't show it in video, or I'm just blind or something
Samuel Ladziansky said:
Well he did with the battery and he add more steps that are not necessary for flashing, like scanning for COM port etc...
When I first try flash my 7s I download flashtool and didn't change any settings, I just load the rom and flash it.
So you must try to find your best way how to do and I will help you
And I wonder how he can flash the Log and Cust partition via flashtool, Maybe he have unlocked bootloader or something
Update: he have in the video description link for "lib usb" but didn't show it in video, or I'm just blind or something
Click to expand...
Click to collapse
Yeah. For the flash mode, I wonder why his own he said I need to hold the volume up and down button at the same time. But thanks I'll do it and let you know.
here is version 3 of twrp recovery port
-fixed language form russia to english
-lenovo banner replaced with original TWRP
Samuel Ladziansky said:
here is version 3 of twrp recovery port
-fixed language form russia to english
-lenovo banner replaced with original TWRP
Click to expand...
Click to collapse
At this point. Might just abandon it. Thanks for everything. Ran into laptop issue on my third trial lol.
Yeah I see, drivers issues, it happens to me too, but I install windows 7 and everything works... but I think is not worth it to format your laptop and install win7 only for this mediatek crap, where you can't unlock bootloader or anything because Huawei trying to protect customers and they believe that their android is best for they're phones
Samuel Ladziansky said:
Yeah I see, drivers issues, it happens to me too, but I install windows 7 and everything works... but I think is not worth it to format your laptop and install win7 only for this mediatek crap, where you can't unlock bootloader or anything because Huawei trying to protect customers and they believe that their android is best for they're phones
Click to expand...
Click to collapse
Honestly. I spend a whole night researching videos for the phone. Only to get that link I send. And after all that. It still didn't work. Lol. I have a Poco x3 pro. I wonder if snapdragon android 12 can be rooted. Probably going to try it next month or so.
Snapdragon is eazy for root.
I have Redmi note 11 and it was easy, now I running on Android 13 from stock android 11, if you will need some help with something, I'm here, and I think there is device forum so there is community for that device
Hello, after a week waiting for unlocking the phone, i tried to install twrp unnoficial following a guide on the web... now the phone is totally bricked., it dosnt go into recovery mode only fastboot and after 10 seconds it restarts, i have adb installed properly on the pc, it detects my old poco f1 but the x3 gt isnt recognized and reboots after 10 seconds...
have anyone experienced this, or know of a possible solution? i really need help
ohh adding more info... maybe i messed up the boot partition, cause extracting the rom and looking at the flash_all.bat it says boot_ab and i did to boot... after this it entered the loop, it was recognizing the phone but i tried installing the room via miflash, gave error everytime i tried and now it isnt being recognized plus after 10 sec in fastboots it restarts... there is no charging battery creen just the loop
Just get a new device now
lol i dont want tooo... was thinking bout that
well... slowly, step by step using SP flash tool i am now able to see the poco logo and charging batery again... algo into fastboot i can get... gonna keep this updated in case anybody has this issue
btw.. there are 3 files i cannot flash, it gives error...
dpm_a.img
cust.img
rescue.img
rescue.img says mismatch, but i extradted the files from the downloaded poco rom, dows anybody know thy this happen?
well almost fixed... i managed to flash the room a while ago... now it can go into recovery mode, but says NV corrupted, any idea?
it can only boot into fastboot and recovery... i supose as it has something corrupted it wont boot into the system
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye
Ocelado said:
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye
Click to expand...
Click to collapse
eres español?
Ocelado said:
eres español?
Click to expand...
Click to collapse
Ocelado said:
yeah i speak spanish... well i will try, i flashed using sp flash tool, maybe its different using miflash?
Click to expand...
Click to collapse
i wanted to root my x3 gt but the unnoficial twrp around is what bricked my phone ahahaha
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Ocelado said:
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Click to expand...
Click to collapse
how did you installed, fastboot? what partition name did u use? i followed a guide that said recovery but x3 gt uses rescue i believe... this is wht bricked me
ohh btw i installed an enginering rom and now i was able to get into the phone... sadly on info, i have no mac address no imei... do someone know how to fix this?
Ocelado said:
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Click to expand...
Click to collapse
i flashed it to boot like the site says, but there is no recovery now... i can get into the system but no twrp recovery holding vol up and power
Rynhe said:
ohh btw i installed an enginering rom and now i was able to get into the phone... sadly on info, i have no mac address no imei... do someone know how to fix this?
Click to expand...
Click to collapse
you must turn on wifi to see mac address
Gaderg1992 said:
you must turn on wifi to see mac address
Click to expand...
Click to collapse
nope it wont let me.. i turn it on and does nothing...
I installed twrp on boot partition, and if you can't enter twrp reflash it.
Ocelado said:
I installed twrp on boot partition, and if you can't enter twrp reflash it.
Click to expand...
Click to collapse
man you are right.. idunno what hapened.. suddenly it jst booted in twrp
gl i hope i can help you. If you need more help just write here
Ocelado said:
gl i hope i can help you. If you need more help just write here
Click to expand...
Click to collapse
thanks... do you know of any custom rom for x3 gt? i cant use miui cause it says cant connect to google server at forst boot config
iv tried many gsi but none of these bots up after flashing to system
No... I don't know any rom...
2 things: have you installed the global rom? Try the global. Else, try skipping the logging in and then try it by entering gmail or in settings