Hello, after a week waiting for unlocking the phone, i tried to install twrp unnoficial following a guide on the web... now the phone is totally bricked., it dosnt go into recovery mode only fastboot and after 10 seconds it restarts, i have adb installed properly on the pc, it detects my old poco f1 but the x3 gt isnt recognized and reboots after 10 seconds...
have anyone experienced this, or know of a possible solution? i really need help
ohh adding more info... maybe i messed up the boot partition, cause extracting the rom and looking at the flash_all.bat it says boot_ab and i did to boot... after this it entered the loop, it was recognizing the phone but i tried installing the room via miflash, gave error everytime i tried and now it isnt being recognized plus after 10 sec in fastboots it restarts... there is no charging battery creen just the loop
Just get a new device now
lol i dont want tooo... was thinking bout that
well... slowly, step by step using SP flash tool i am now able to see the poco logo and charging batery again... algo into fastboot i can get... gonna keep this updated in case anybody has this issue
btw.. there are 3 files i cannot flash, it gives error...
dpm_a.img
cust.img
rescue.img
rescue.img says mismatch, but i extradted the files from the downloaded poco rom, dows anybody know thy this happen?
well almost fixed... i managed to flash the room a while ago... now it can go into recovery mode, but says NV corrupted, any idea?
it can only boot into fastboot and recovery... i supose as it has something corrupted it wont boot into the system
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye
Ocelado said:
Hello! (Read it fully)
I had the same problem, but i finally got it. First download the 12.5.7.0 rom from this page (Fastboot rom)
Xiaomi Poco X3 GT (chopin) Stock Firmware Collections
On this page, we will share all the latest Xiaomi Poco X3 GT (codenamed chopin) firmware flash files. To flash the firmware file, you need Xiaomi Mi Flash
www.getdroidtips.com
Then, go to Mi Flash Tool (also download from that page). The version you need is 20210226
Then unzip the rom as many times as it needs, and copy it (the most decompressed folder) to the desktop. Then, launch Mi Flash tool and install the drivers in drivers page. In the right corner you need to select "Clean all". And.... FLASH!
It solved my problem. I had the same as you. If your computer doesn't recognize your device, stay in fastboot 30 minutes and it will turn off automatically (with usb unplugged) or if it says no digest file found, turning off in 5 seconds turn it off.
I hope this can solve your problem.
Edit: Then update the firmware to 12.5.8.0 OTA way. Don't obey people saying stupidities like "Buy a new one". This is a forum, to help people, and if u don't know the solution, DON'T SAY ANYTHING
Bye
Click to expand...
Click to collapse
eres español?
Ocelado said:
eres español?
Click to expand...
Click to collapse
Ocelado said:
yeah i speak spanish... well i will try, i flashed using sp flash tool, maybe its different using miflash?
Click to expand...
Click to collapse
i wanted to root my x3 gt but the unnoficial twrp around is what bricked my phone ahahaha
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Ocelado said:
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Click to expand...
Click to collapse
how did you installed, fastboot? what partition name did u use? i followed a guide that said recovery but x3 gt uses rescue i believe... this is wht bricked me
ohh btw i installed an enginering rom and now i was able to get into the phone... sadly on info, i have no mac address no imei... do someone know how to fix this?
Ocelado said:
Hi bro! This is an unofficial twrp that works for me
POCO X3 GT TWRP
Download POCO X3 GT TWRP for free. None
sourceforge.net
Click to expand...
Click to collapse
i flashed it to boot like the site says, but there is no recovery now... i can get into the system but no twrp recovery holding vol up and power
Rynhe said:
ohh btw i installed an enginering rom and now i was able to get into the phone... sadly on info, i have no mac address no imei... do someone know how to fix this?
Click to expand...
Click to collapse
you must turn on wifi to see mac address
Gaderg1992 said:
you must turn on wifi to see mac address
Click to expand...
Click to collapse
nope it wont let me.. i turn it on and does nothing...
I installed twrp on boot partition, and if you can't enter twrp reflash it.
Ocelado said:
I installed twrp on boot partition, and if you can't enter twrp reflash it.
Click to expand...
Click to collapse
man you are right.. idunno what hapened.. suddenly it jst booted in twrp
gl i hope i can help you. If you need more help just write here
Ocelado said:
gl i hope i can help you. If you need more help just write here
Click to expand...
Click to collapse
thanks... do you know of any custom rom for x3 gt? i cant use miui cause it says cant connect to google server at forst boot config
iv tried many gsi but none of these bots up after flashing to system
No... I don't know any rom...
2 things: have you installed the global rom? Try the global. Else, try skipping the logging in and then try it by entering gmail or in settings
Related
Hi,
When i am trying install custom ROM using TWRP in my redmi 2 prime phone ,it got strucked it between the process. So my phone got bricked.
So i tried to install via Mi flash tool with stable ROM of MIUI .But unfortunately there are many disk drives opened with the request to format drive when i am connecting my phone with Mi flash tool for the first time.
By mistake i have formatted one disk drive (which had 512 kb size) and it is successfully done
After formatting only i got to its something importent which is need not to be touched. Because my phone is totally dead after this format.
But now i can able to connect my phone using USB cable and the phone is detectable by computer in MI flash tool. But I am unable to flash the phone with stable ROM as the tool showing the error of "hello packet can not be reached". After the error msg the flashing has stopped .
Is there any experienced developers to help me to solve this issue and bring back my phone
Searching for your answers?
VenKat
Use fastboot method to install fastboot rom
Taskavenkat said:
Hi,
When i am trying install custom ROM using TWRP in my redmi 2 prime phone ,it got strucked it between the process. So my phone got bricked.
So i tried to install via Mi flash tool with stable ROM of MIUI .But unfortunately there are many disk drives opened with the request to format drive when i am connecting my phone with Mi flash tool for the first time.
By mistake i have formatted one disk drive (which had 512 kb size) and it is successfully done
After formatting only i got to its something importent which is need not to be touched. Because my phone is totally dead after this format.
But now i can able to connect my phone using USB cable and the phone is detectable by computer in MI flash tool. But I am unable to flash the phone with stable ROM as the tool showing the error of "hello packet can not be reached". After the error msg the flashing has stopped .
Is there any experienced developers to help me to solve this issue and bring back my phone
Searching for your answers?
VenKat
Click to expand...
Click to collapse
Do you know how to work with SP Flash Tools? It's what I would recommend.
kiko9895 said:
Do you know how to work with SP Flash Tools? It's what I would recommend.
Click to expand...
Click to collapse
Hi ,
Thanks for your reply.
SP flash tool only for MediaTek Devices. But Redmi 2 prime is Qualcomm device.So i am unable to use the SP flash tool.
Can you suggest me any other idea?
Hi
try fastboot method to restore recovery and other stuffs......
Perhaps you might want to go to a Redmi 2 forum? This is a Redmi Note 2 forum (i.e., different device).
DarthJabba9 said:
Perhaps you might want to go to a Redmi 2 forum? This is a Redmi Note 2 forum (i.e., different device).
Click to expand...
Click to collapse
oh sorry... i will check this on Redmi 2 prime forum.
Thanks.
Code:
**** DISCLAIMER ****
This post is an EXPERT-LEVEL Post.
I am NOT RESPONSIBLE for what you do to your device.
Please not that I am still working on a solution to this brick.
Hello XDA-Developers,
I recently got my hands on a Meizu M3 note and, of course, wanted the newest - nougat - firmware on it. It seems I accidently flashed a incompatible (or currupted) Update (flashed an A Firmware on a G version phone). Sadly it broke down and showed only vertical stripes on it's display.
Image here: https://ibb.co/cpGunm
After some hours research I found some information on how to reflash the M3 note via SP Flash Tool here and here. Since the first tutorial is for the M3 and M3s and the second tutorial is for the M model of the device (I've got the L model) there are some changes needed for it to somehow magically work.
I exchanged files provided (such as preloader.bin, lk.bin etc) with the matching ones from the latest Official Global Firmware from Meizu. Just extracted them out of the update.zip. (Don't forget to select the Authentication File!)
Image here: https://ibb.co/k3zYDR
Short flashing tutorial: make sure your device is turned off and disconneced then click "Download" and connect your device via USB. Don't worry if it now shows an error like "Download DA Failed", just dismiss the error and click "Download" again. It should flash the device now.
Sadly it is not possible to flash the boot.img provided in the latest official update.zip from Meizu (you'll get an security mismatch error). BUT the boot-verified.img provided by the chinese archive is flashable and is accepted by the device. The device is now in a bootloop, fastboot is accessible via holding Vol - and Power, but no recovery access via Vol+ and Power
The files seem to be repaired now but the display still shows these stripes - I think the firmware actually fried something on the display chipset. I bought a replacement screen and then will update this thread as soon as possible. If you have any Ideas of how to unbrick the device feel free to discuss.
Update 18.11.2017
Thanks to @ncristian !
I did as he suggested, downloaded and flashed the files from the russian forum here (if you do not speak russian and want to get straight to the point: Direct Download Link)
I still have the stripes on my screen but the device booted up successfully and got recognized again by my computer! While booting up I could see the stripes changing their color slightly as the bootanimation of flyme was playing. I guess I will have to replace the screen to make the display error go away... I will update this post as soon as I did so
Update 10.11.2018
Sadly I never actually exchanged the screen, I'm running a Pro 7 Plus as a daily driver now and I'm loving it
Update 19.05.2019
I have attached the boot-verified.img as someone requested it
I had the same problem and I solved thanks to this: https://4pda.ru/forum/index.php?showtopic=739028&st=24480#entry65580668 and Google Translate; I downloaded the .zip, installed drivers, launched the flash tool and flashed files contained in the folder L691H (Remember to install drivers and disable antivirus or it will not work). Then I downloaded FlyMe 6.1.0.0G, went into recovery with vol up + power, copied the update.zip into the device "Recovery" and flashed it; the only problem I had is that the phone charged but he didn't recognize the battery level; by reflashing the files contained in the 4pda .zip, the battery level went up (obviously, after leaving the phone charging for about an hour).
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Rajdas26 said:
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Click to expand...
Click to collapse
Try reflashing via the original recovery, that might be your easiest solution. If that doesn't work you might try your luck with something like SP flash tool
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
shawn_mendes said:
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
Click to expand...
Click to collapse
I have attached the file to the first post. Good thing I never delete anything :angel:
m3shat said:
I have attached the file to the first post. Good thing I never delete anything :angel:
Click to expand...
Click to collapse
First of all, thank you mate I successfully downloaded the boot verified. But still it didn't turned on. Just no power but recognized by the sp tool. I'm starting to think that downloaded again the wrong firmware. I also found out that their are two main board(or whatever is that). So this global firmware can be flashed in the both L and M series. I'm wondering what firmware you used to flash. Again, thank you in advance ^_^
l got same problem .. (because I'm not read careful )l tired to flash using many firmware or using boot verified .. i tired that for 2 Days.. So l give up.. take my device to profesional service . and solved. solved with Emmc repair ..
my device is L681H.
this phone use mt6739.so i want to flash it the twrp to my phone.i dunno to unlock the bootloader but the twrp file not have for this device.
I just saw this post as I too have a Honor 7S
There is NO TWRP for our device.
The TWRP for the Honor 7A/7C/7X and Honor 7 doesn't work on our device and you got to pay 4 euros to unlock the bootloader before you can even flash TWRP (and there isn't one)
This Device is treble compatible but now I've found out there is zero development and no Devs Interested in it it's a complete and utter waste of time and has gone back into its box, never to be seen again.
hi there, I get this phone recently (because is old) and I created twrp for i,t so here it is, if you want some fun
you can flash it via flashtool on locked bootloader in to boot partition and after that you push twrp.img via adb to internal storage and flash it in to erecovery and recovery slot, and you are good to go
Samuel Ladziansky said:
hi there, I get this phone recently (because is old) and I created twrp for i,t so here it is, if you want some fun
you can flash it via flashtool on locked bootloader in to boot partition and after that you push twrp.img via adb to internal storage and flash it in to erecovery and recovery slot, and you are good to go
Click to expand...
Click to collapse
Hi I have a problem. I'm having brom issues in trying to flash it
Hi
I thinking you dont have "Authentication file" so you using "mtksecurebootdisabler",
so you need patch your drivers with libusb "patch".
Try this one, for me it works.
So open libusb that you install.
connect your honor7s to the pc with disconnected batery and hold volume down.
in patch option select your usb mtk device "idk how is called" and patch it
after patching reconnect phone and it will works.
usab1oy said:
Hi I have a problem. I'm having brom issues in trying to flash it
Click to expand...
Click to collapse
and little hint
dont flash whole rom if the phone can boot becasue after clean flash "format+download"
you lost log and cust partition because the image files are not secureboot signed and your phone get in to bootloop
and also you lost imei codes so no cellular after that
If you do so
you can fix it in that recovery were I enabled option to format log partition
after you format log to ext4, your phone will boot but without huawei/honor bootanimation
you dont need to worry about cust partition, if you didnt format it it still boot but without bootanimation and you lost some of garbage apps that are in that partition (amazon etc...)
(twrp boots in russian language, idk for now how to change it to boot in english or slovak lanuage (because Im from slovakia) and also it have Lenovo Logo becasuse I use sources from Lenovo A5 that have same cpu)
I will make in future separated thread for this....
Thanks alot for this.. I don't know maybe I should try the disconnected battery. But from a yt link I saw
The link : Honor 7s Dua-Al000
I wonder how his worked
I'll have to know how to disconnect the battery thou. I'm a noob at this.
Samuel Ladziansky said:
Hi
I thinking you dont have "Authentication file" so you using "mtksecurebootdisabler",
so you need patch your drivers with libusb "patch".
Try this one, for me it works.
So open libusb that you install.
connect your honor7s to the pc with disconnected batery and hold volume down.
in patch option select your usb mtk device "idk how is called" and patch it
after patching reconnect phone and it will works.
Click to expand...
Click to collapse
Sorry for the noob question but after patching with the battery disconnected. When I want to use spflash tools would I still use disconnect the battery to flash the recovery and co.
usab1oy said:
Sorry for the noob question but after patching with the battery disconnected. When I want to use spflash tools would I still use disconnect the battery to flash the recovery and co.
Click to expand...
Click to collapse
you can patch it or flash it without disconecting the battery
Here is how:
turn it off
Push and hold volume down
While holding volume down connect usb cable
But is recomended to disconect battery because the phone can boot up instead to go in flash mode.
usab1oy said:
Thanks alot for this.. I don't know maybe I should try the disconnected battery. But from a yt link I saw
The link : Honor 7s Dua-Al000
I wonder how his worked
I'll have to know how to disconnect the battery thou. I'm a noob at this.
Click to expand...
Click to collapse
Well he did with the battery and he add more steps that are not necessary for flashing, like scanning for COM port etc...
When I first try flash my 7s I download flashtool and didn't change any settings, I just load the rom and flash it.
So you must try to find your best way how to do and I will help you
And I wonder how he can flash the Log and Cust partition via flashtool, Maybe he have unlocked bootloader or something
Update: he have in the video description link for "lib usb" but didn't show it in video, or I'm just blind or something
Samuel Ladziansky said:
Well he did with the battery and he add more steps that are not necessary for flashing, like scanning for COM port etc...
When I first try flash my 7s I download flashtool and didn't change any settings, I just load the rom and flash it.
So you must try to find your best way how to do and I will help you
And I wonder how he can flash the Log and Cust partition via flashtool, Maybe he have unlocked bootloader or something
Update: he have in the video description link for "lib usb" but didn't show it in video, or I'm just blind or something
Click to expand...
Click to collapse
Yeah. For the flash mode, I wonder why his own he said I need to hold the volume up and down button at the same time. But thanks I'll do it and let you know.
here is version 3 of twrp recovery port
-fixed language form russia to english
-lenovo banner replaced with original TWRP
Samuel Ladziansky said:
here is version 3 of twrp recovery port
-fixed language form russia to english
-lenovo banner replaced with original TWRP
Click to expand...
Click to collapse
At this point. Might just abandon it. Thanks for everything. Ran into laptop issue on my third trial lol.
Yeah I see, drivers issues, it happens to me too, but I install windows 7 and everything works... but I think is not worth it to format your laptop and install win7 only for this mediatek crap, where you can't unlock bootloader or anything because Huawei trying to protect customers and they believe that their android is best for they're phones
Samuel Ladziansky said:
Yeah I see, drivers issues, it happens to me too, but I install windows 7 and everything works... but I think is not worth it to format your laptop and install win7 only for this mediatek crap, where you can't unlock bootloader or anything because Huawei trying to protect customers and they believe that their android is best for they're phones
Click to expand...
Click to collapse
Honestly. I spend a whole night researching videos for the phone. Only to get that link I send. And after all that. It still didn't work. Lol. I have a Poco x3 pro. I wonder if snapdragon android 12 can be rooted. Probably going to try it next month or so.
Snapdragon is eazy for root.
I have Redmi note 11 and it was easy, now I running on Android 13 from stock android 11, if you will need some help with something, I'm here, and I think there is device forum so there is community for that device
I was using dotOS on my redmi 5 plus (redmi note 5) when suddenly while playing game my froze and after trying to restart it it got stuck on boot screen (MI logo). And when I tried to open TWRP ( which was already intalled on my device) it also stuck on TWRP starting window. then I tried to flash TWRP again on my phone via mi flash tool but it showed on status error: writing 'sec' FAILED (remote : "flash write failure") . Please help it is my primary phone and I was unable to use it since last 2 days.
GirishHardia said:
I was using dotOS on my redmi 5 plus (redmi note 5) when suddenly while playing game my froze and after trying to restart it it got stuck on boot screen (MI logo). And when I tried to open TWRP ( which was already intalled on my device) it also stuck on TWRP starting window. then I tried to flash TWRP again on my phone via mi flash tool but it showed on status error: writing 'sec' FAILED (remote : "flash write failure") . Please help it is my primary phone and I was unable to use it since last 2 days.
Click to expand...
Click to collapse
@GirishHardia
Welcome to XDA. I hope you'll always find and get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved the thread to
Xiaomi Redmi Note 5 / 5 Plus Questions & Answers
Ask your questions about the Xiaomi Redmi Note 5 and get answers from the community! Please be as specific as possible when posting.
forum.xda-developers.com
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
I almost tried to flash 3 different roms on my redmi 5 plus but it always showed error:Writing 'sec' FAILED:remote"flash write faliure". Please help me to overcome this error
GirishHardia said:
I almost tried to flash 3 different roms on my redmi 5 plus but it always showed error:Writing 'sec' FAILED:remote"flash write faliure". Please help me to overcome this errorView attachment 5623507
Click to expand...
Click to collapse
Check here that everything is correct
GirishHardia said:
I almost tried to flash 3 different roms on my redmi 5 plus but it always showed error:Writing 'sec' FAILED:remote"flash write faliure". Please help me to overcome this errorView attachment 5623507
Click to expand...
Click to collapse
Make the path to the firmware shorter, like c:/vince
joke19 said:
Make the path to the firmware shorter, like c:/vince
Click to expand...
Click to collapse
We tried that, didn't work. I went to Mi service center nearby they told to change the motherboard and it costs 3,600/- What to do now
GirishHardia said:
We tried that, didn't work. I went to Mi service center nearby they told to change the motherboard and it costs 3,600/- What to do now
Click to expand...
Click to collapse
could you post the miflash log?
GirishHardia said:
I almost tried to flash 3 different roms on my redmi 5 plus but it always showed error:Writing 'sec' FAILED:remote"flash write faliure". Please help me to overcome this errorView attachment 5623507
Click to expand...
Click to collapse
Is your bootloader unlocked? If yes then only MiFlash tool works. Now what do you want? Do you want stock rom or custom rom? Reply asap so that we can solve your problem don't pay 3600 unnecesarily. Your device is healthy.
Hello,
I have the exact same problem, OrangeFox Recovery is stuck at the logo, booting the device normally makes it stuck at MI logo too.
MiFlash shows the same error "flash_write_failure", but, cmd shows that the flashing was a success (or "done").
Any ideas?
UPDATE: here's the log:
Same error too, I think it's internal memory issue :'(
billouetaudrey said:
Same error too, I think it's internal memory issue :'(
Click to expand...
Click to collapse
did you guys managed something? My old mi a1 has the same problem. I think internal memory is dead
I have the same error for Redmi 7A. The brief description is below -
I was using Nusantra OS for Redmi 7A (I really don't know the version which I was using but the official website claimed it was latest). AOD was enabled and suddenly my screen froze and tried to reboot the phone abnormally, after that it stuck into a boot loop. When I tried to flash it from my pc it gave me this error, the error is attached with this reply/message. This phone is my primary phone, I am not able to use it since 5 days please help. As some @NOSS8 replied, that to check if everything is correct from here I verified it too, everything is correct and fine. But the error will show up each time I try to flash it from, the classic version (miflashtool) or the flash_all.bat version. I will attach the log and screenshot for the following. Please help!
Gibbron1 said:
I have the same error for Redmi 7A. The brief description is below -
I was using Nusantra OS for Redmi 7A (I really don't know the version which I was using but the official website claimed it was latest). AOD was enabled and suddenly my screen froze and tried to reboot the phone abnormally, after that it stuck into a boot loop. When I tried to flash it from my pc it gave me this error, the error is attached with this reply/message. This phone is my primary phone, I am not able to use it since 5 days please help. As some @NOSS8 replied, that to check if everything is correct from here I verified it too, everything is correct and fine. But the error will show up each time I try to flash it from, the classic version (miflashtool) or the flash_all.bat version. I will attach the log and screenshot for the following. Please help!
Click to expand...
Click to collapse
Post the full Miflash log
NOSS8 said:
Post the full Miflash log
Click to expand...
Click to collapse
I shut down my pc rn, will update this message tmrw at 12:00PM IST or b4 that, sorry for incovinience
The MiFlash log is attached with this message
dunzing_master said:
Is your bootloader unlocked? If yes then only MiFlash tool works. Now what do you want? Do you want stock rom or custom rom? Reply asap so that we can solve your problem don't pay 3600 unnecesarily. Your device is healthy.
Click to expand...
Click to collapse
I have the same problem in redmi 7a
Flash write failure and they told me
You need to change the motherboard
Gibbron1 said:
I have the same error for Redmi 7A. The brief description is below -
I was using Nusantra OS for Redmi 7A (I really don't know the version which I was using but the official website claimed it was latest). AOD was enabled and suddenly my screen froze and tried to reboot the phone abnormally, after that it stuck into a boot loop. When I tried to flash it from my pc it gave me this error, the error is attached with this reply/message. This phone is my primary phone, I am not able to use it since 5 days please help. As some @NOSS8 replied, that to check if everything is correct from here I verified it too, everything is correct and fine. But the error will show up each time I try to flash it from, the classic version (miflashtool) or the flash_all.bat version. I will attach the log and screenshot for the following. Please help!
Click to expand...
Click to collapse
I have the same problem on redmi 7a
And also they told me change the motherboard
Did you get another solution?
abdeneo said:
I have the same problem on redmi 7a
And also they told me change the motherboard
Did you get another solution?
Click to expand...
Click to collapse
Sorry pal you need to get another phone it's a hardware problem, if you need to get it fixed you must have patience
Gibbron1 said:
Sorry pal you need to get another phone it's a hardware problem, if you need to get it fixed you must have patience
Click to expand...
Click to collapse
Is there another way to fixed other than change the motherboard?!
abdeneo said:
Is there another way to fixed other than change the motherboard?!
Click to expand...
Click to collapse
Mine also same problem,i think after flashing the custom rom not made for Redmi 7A, perhaps the device Id has overwritten so that the stock rom could not recognize the original Id
@GirishHardia @Gibbron1
did you guys find any solution?
Hi, I'm new to the forums.
Back to July 2020, I tried to install custom ROM for my Redmi Cactus and it has no problem until I wipe the data from TWRP and install the custom ROM but failed, I couldn't remember why. And now the phone is dead, it won't boot, no vibration what so ever, when I charge it the LED turns on but when I plug it to PC it won't detect the phone, no sound and nothing in Device Manager even though I have the MTK driver installed on my PC. I've read this thread and couldn't understand the first step as it says "Open REV4 Bypass tool, off your phone. Click BYPASS Connect phone to PC and Turn ON your phone." but I can't turn on my phone. Also on Step 2 which is the SP Flash Tool thing, it says "Open SPFLASHTOOL choose in Download-Agent No_Auth.bin" but on my SP Flash Tool archive I can't find No_Auth.bin, is it somewhere from third-party or from the firmware itself? Currently I'm downloading the firmware and will try to flash it using SP Flash Tool to see if it works. Any help with this?
Best Regards,
Rev.
bioib said:
Hi, I'm new to the forums.
Back to July 2020, I tried to install custom ROM for my Redmi Cactus and it has no problem until I wipe the data from TWRP and install the custom ROM but failed, I couldn't remember why. And now the phone is dead, it won't boot, no vibration what so ever, when I charge it the LED turns on but when I plug it to PC it won't detect the phone, no sound and nothing in Device Manager even though I have the MTK driver installed on my PC. I've read this thread and couldn't understand the first step as it says "Open REV4 Bypass tool, off your phone. Click BYPASS Connect phone to PC and Turn ON your phone." but I can't turn on my phone. Also on Step 2 which is the SP Flash Tool thing, it says "Open SPFLASHTOOL choose in Download-Agent No_Auth.bin" but on my SP Flash Tool archive I can't find No_Auth.bin, is it somewhere from third-party or from the firmware itself? Currently I'm downloading the firmware and will try to flash it using SP Flash Tool to see if it works. Any help with this?
Best Regards,
Rev.
Click to expand...
Click to collapse
Follow this https://www.droidwin.com/unbrick-realme-6-6i-6s-sp-flash-tool/, of course, skip to download and flash the files that are for the other model, instead, replace from your phone's files.
The whole idea, is that you have to install the LibUSB drivers, so your device get recognized and can bypass the DA/SLAA restrictions for BROM mode, in MediaTek devices. When you can bypass it, then you can flash the proper firmware for your device, you don't need to power on your device for that, as your device is bricked...
Hi, sorry it took me so long to reply, the phone is finally fixed thanks to your guide! How can I make this thread or your post as a solution?
bioib said:
Hi, sorry it took me so long to reply, the phone is finally fixed thanks to your guide! How can I make this thread or your post as a solution?
Click to expand...
Click to collapse
Good to know that. Feel free to post any you consider useful for any user.
if you want to mark this thread, you should edit the tittle, in the thread, adding the word (Solved)