Hi I'm having a serious problem with my phone. It works OK when its booted, but sometimes it reboots, then keeps rebooting and freezing for about 10 mins, before it boots normally. When I boot into recovery, it also freezes after a few seconds, but when it reboots, it goes back to recovery unless I hold down the power button. This means I cant send any files to it through Minimal ADB and Fastboot, or anything like that.
I'm using the rom crDroid v2.3 with TWRP recovery.
P.S. This only really happened after I updated to TWRP v3.1.0.0, as before then, it was fine. Also, it wont show any of my SD card files in TWRP.
I hope you can help!
Downgrade twrp since it may be twrp that's causing the problem.
audit13 said:
Downgrade twrp since it may be twrp that's causing the problem.
Click to expand...
Click to collapse
I can guarantee twrp has goosed something.
Be very careful with twrp if f**ks phones for sh*ts and giggles. If I were you I'd be using an official cwm recovery whenever possible as it's much more stable.
Beamed in by telepathy.
I have downgraded, to 3.0.0.2, and it worked fine first of all, but hen it started going weird again. I can't flash CWM through Odin, as it just freezes when I try. I guess I could try a different cable though
Sorry for any inconvenience, but I took out my SD card, put it back in, and rebooted into recovery, and it started working ok. It showed my SD and everything. I'm going to try sending a file to my phone now. Will tell you if it works. Thanks for your help, anyway!
Related
Recently decided to try and switch over to CM10, and have been having an issue with recovery. Both of the latest CWM and TWRP recoveries freeze for me after booting into them. The only recovery that works for me is the one that is flashed with the old app by Indirect but that flashes a really old CWM recovery. The recoveries that I have tried flashing are the ones linked to in the http://forum.xda-developers.com/showthread.php?t=1877217 thread. Both http://celticstorage.co.uk/cm10/CWM_v6.0.1.5_emmc.zip and http://celticstorage.co.uk/cm10/TWRP_v2.3.1.1_emmc.zip are doing it. I have a 16GB that ive kept (rooted) stock forever.
What happens is i go to boot to recovery, go through cyanoboot to recovery, and then CWM freezes up and blackscreens after I try to wipe something or install a zip, TWRP just locks up immediately and gives me a black screen. Any help fixing this would be greatly appreciated.
Use this thread to install CWM, I'm not a fan of TWRP. http://forum.xda-developers.com/showthread.php?p=25786947 I used this and had no problems updating
Sent from my NOOK Tablet running CM10
deltantor said:
Recently decided to try and switch over to CM10, and have been having an issue with recovery. Both of the latest CWM and TWRP recoveries freeze for me after booting into them. The only recovery that works for me is the one that is flashed with the old app by Indirect but that flashes a really old CWM recovery. The recoveries that I have tried flashing are the ones linked to in the http://forum.xda-developers.com/showthread.php?t=1877217 thread. Both http://celticstorage.co.uk/cm10/CWM_v6.0.1.5_emmc.zip and http://celticstorage.co.uk/cm10/TWRP_v2.3.1.1_emmc.zip are doing it. I have a 16GB that ive kept (rooted) stock forever.
What happens is i go to boot to recovery, go through cyanoboot to recovery, and then CWM freezes up and blackscreens after I try to wipe something or install a zip, TWRP just locks up immediately and gives me a black screen. Any help fixing this would be greatly appreciated.
Click to expand...
Click to collapse
This has been happening to me occasionally. I have found that when I get the black screen, pressing the Power button launches Recovery (CWM in my case). See if that works for you.
I now have the exact same problem. I've always ran off emmc. It says cwm 6.0.1.5 is installed. When I try to either wipe, or install zip-from-sd, cwm freezes then goes to the black screen. I cannot install any zips, so right now the tablet has nothing installed only a freezing cwm recovery it seems. I can use the power button to get out of the black screen and into cwm thru cyanoboot all day, but get nothing but these same steps reoccurring. Freeze, then black sod. I'm ready to try anything but cannot flash anything.
To the rescue
Ok, I have posted this on a different day. Try this with a blank sd card. Look at the bottom post called "Here is a video"
It a external boot cwm v.5 but you can copy this into your sd then flash and you have cwm v6.0.1.5 internal. Either way you have two ways to do recovery (external and internal):victory:
djd338 said:
I now have the exact same problem. I've always ran off emmc. It says cwm 6.0.1.5 is installed. When I try to either wipe, or install zip-from-sd, cwm freezes then goes to the black screen. I cannot install any zips, so right now the tablet has nothing installed only a freezing cwm recovery it seems. I can use the power button to get out of the black screen and into cwm thru cyanoboot all day, but get nothing but these same steps reoccurring. Freeze, then black sod. I'm ready to try anything but cannot flash anything.
Click to expand...
Click to collapse
Thanks very much for the reply & link!
I'll do this ASAP when I get back home & report. Thx again!
Sent from my Nexus 7 using Tapatalk 2
Well, I think I need to clarify more. Maybe somebody can help if I give more info. I've had cm7 running perfect, then decided to install cm10. I first flashed a cwm 6.0.1.5 zip to emmc. I did a factory reset via this recovery thinking my next move would be to flash the cm10 zip I'd put on the sd. No joy. This is where I'm at now.
In recovery it freezes and reboots to the "2 androids" screen with a sod. I hold power for 20 sec.s to turn off, then turn back on and get to cyanoboot fine. There, if it's allowed to just boot it freezes at the 2 androids. If I hold "n" to get the menu and recovery (6.0.1.5) it looks normal, will boot to recovery OK until anything is selected like the cm10 zip. It freezes before any selections can be finalized, and boots to that sod screen.
I know nothing of ubuntu! Sorta scared to go there with my limited knowledge. But will read up if it's required. Is it possible that this new recovery image don't play with what is currently on the sd? Is there anything I can put there that it may recognize in order to get a flash? Man, I'm lost!
Look pass the fear and go one step at a time, before you know it, your there.
It looks like you have already resolved this from this thread.
Ok, basically I'll go step by step.
1. Download ubuntu iso from ubuntu website (you can donate or put 0$ then download iso) and burn it to cd. 5 minutes
2. Stick the cd into a system that you don't plan to look at the video that is showing you the process and boot it up from a reboot and not from within windows. Select the left square which basically load the ubunbu from cd but does not install anything to your hard drive.3 minutes
3. You can view the whole video but I would skip to the section in video (3:28 watch to 4:43, 6:56 watch to 8:06 ) where I mentioned the setting the two flags in your sd after quick format fat32 and extracting the four files into your sd within ms windows platform from the post . I did this with a normal mini sd card adapter and not the usb stick adapter he used in the video. Since you are doing this to a blank mini sd then there really nothing to worry about since it is blank in the first place. 2 minute
4. If you had your apps backup with titanium backup then it still will be on the main mini sd and not the one that working with for this recovery.
5. I notice you did not mention wipe dalvik cache from your post. You should always wipe dalvik then wipe factory then do a single flash to test boot up.. You can flash gapps after a successful boot up into jellybean. (here's a video showing that I'm using external cwm v.5 even though its recommended to use v.6 .) You can always use cwm v.6 on your next cm10 test rom or use cwm v.6 to reflash to same rom once a successful boot up have been obtained with external cwm v.5. This purpose is to get it running on your nt.
6. Be patient for the first boot. Should not be more than 5 minutes max. It will look black then load. If it boot loops then wipe dalvik then wipe factory and do a single flash to test boot up again.
This will at least get cm 10 flavored rom on to your nt.
djd338 said:
Well, I think I need to clarify more. Maybe somebody can help if I give more info. I've had cm7 running perfect, then decided to install cm10. I first flashed a cwm 6.0.1.5 zip to emmc. I did a factory reset via this recovery thinking my next move would be to flash the cm10 zip I'd put on the sd. No joy. This is where I'm at now.
In recovery it freezes and reboots to the "2 androids" screen with a sod. I hold power for 20 sec.s to turn off, then turn back on and get to cyanoboot fine. There, if it's allowed to just boot it freezes at the 2 androids. If I hold "n" to get the menu and recovery (6.0.1.5) it looks normal, will boot to recovery OK until anything is selected like the cm10 zip. It freezes before any selections can be finalized, and boots to that sod screen.
I know nothing of ubuntu! Sorta scared to go there with my limited knowledge. But will read up if it's required. Is it possible that this new recovery image don't play with what is currently on the sd? Is there anything I can put there that it may recognize in order to get a flash? Man, I'm lost!
Click to expand...
Click to collapse
Got it back! Thank you for your help & patience. Also for the timely responses. I now have a bootable "recovery sd card" for curing these type problems. I've labeled it & filed away for any future borks of this kind! And I have cm10 up & running stable.
Thank you!
Sent from my Nexus 7 using Tapatalk 2
I messed up big time. I wiped then flashed CM 10 Stable. Well, I didn;t flash the gapps (not sure that is the culprit) and now i get a constant loop of "the process com.android.phone has stopped". I held down the power and VOL UP button to get to the bootloader/recovery but, when I flashed my radios several months ago after i got S-OFF, I forgot to rename the PC75img.zip file so the phone just loads that. So i can't choose to go in to recovery. Now I'm stuck, I have no way of fixing the phone unless anyone has any suggestions.
sveilien said:
I messed up big time. I wiped then flashed CM 10 Stable. Well, I didn;t flash the gapps (not sure that is the culprit) and now i get a constant loop of "the process com.android.phone has stopped". I held down the power and VOL UP button to get to the bootloader/recovery but, when I flashed my radios several months ago after i got S-OFF, I forgot to rename the PC75img.zip file so the phone just loads that. So i can't choose to go in to recovery. Now I'm stuck, I have no way of fixing the phone unless anyone has any suggestions.
Click to expand...
Click to collapse
If you are able to get to the bootloader, fastboot flash TWRP and go into recovery before rebooting your phone. Delete the zip file in TWRP's file manager.
Just take out the card...
Sent from my EVO using xda premium
I have been running the same build of CM11 since February with few issues. However for the past couple of weeks my phone has been randomly freezing but no harm was done as a battery pull / reboot would simply fix the issue until the next occurrence.
This morning a freeze occurred during normal use of my phone but after rebooting it would always hang on the CM loading screen. I booted into recovery and flashed an old version of CM10 successfully and everything seemed to be working.
This evening I attempted to flash a new build of CM11 however something went wrong during the data wipe I performed before installation of the new ROM. Since that point I cannot flash any ROM because my phone will always freeze after about 30 seconds of being booted inside recovery mode.
Download mode seems to work perfectly and I have successfully flashed CWM 6.0.3.2 and CWM 6.0.4.7 but both still freeze after about 30 seconds of being booted into them.
Has anyone had this issue or can offer help?
Sounds like nand memory has bad blocks. Try flashing a full stock rom with Odin.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Sounds like nand memory has bad blocks. Try flashing a full stock rom with Odin.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
You could well be right about it being a NAND issue, I guess time will tell if I continue getting random freezes.
I flashed a full stock ROM according to your suggestion and ended up with a non-functioning ROM but a functional stock recovery. I then did a factory reset from within the stock recovery which seemed to work. I also formatted my external SD card just in case. I then flashed a custom recovery via Odin and it was fully functional.
Now happily running CM11 again!
So I tried TWRP and have had extremely bad luck. I thought I bricked the phone at first, then it was stuck in a boot loop, THEN TWRP could not read from the internal memory, and to top it off, when I finally got the phone to boot up, I went ahead and bought a sim card and got it hooked up to ATT, and when I inserted the sim card, it automatically rebooted the phone into TWRP and reset everything (deleting all my apps and stuff) and got stuck in a boot loop.
I had an old phone and used clockwork mod recovery without any issue. Does anyone know where to find a CWM recovery image for the z5 compact?
Actually, if anyone has even the STOCK recovery I would be forever grateful. I would rather stock than TWRP at this point. I don't want to risk my phone being reset and having everything deleted again.
Same issue, unable to boot rom, TWRP has no access..
thegreatyashu said:
So I tried TWRP and have had extremely bad luck. I thought I bricked the phone at first, then it was stuck in a boot loop, THEN TWRP could not read from the internal memory, and to top it off, when I finally got the phone to boot up, I went ahead and bought a sim card and got it hooked up to ATT, and when I inserted the sim card, it automatically rebooted the phone into TWRP and reset everything (deleting all my apps and stuff) and got stuck in a boot loop.
I had an old phone and used clockwork mod recovery without any issue. Does anyone know where to find a CWM recovery image for the z5 compact?
Actually, if anyone has even the STOCK recovery I would be forever grateful. I would rather stock than TWRP at this point. I don't want to risk my phone being reset and having everything deleted again.
Click to expand...
Click to collapse
I am experiencing the same issue. I would like any working recovery/rom at this point. My Wife has the identical phone. Can I make a copy of hers to help the OP and my phone out?
I followed the following;
http://forum.xda-developers.com/z5-compact/development/rom-cyanogenmod-13-sony-xperia-z5c-t3339930
and have tried a few times now. As well as other versions of TWRP..
On a side note I wouldn't mind testing new roms/features being implemented by developers. Please let me know where the best place to get involved would be.
Thanks in advance,
David.
found a boot.img and TWRP that worked for me..
So after a lot of flashing I found one that works.
http://forum.xda-developers.com/z5-compact/orig-development/twrp-z5-compact-t3235161
at least I can get twrp working for now..
I still can not get CM installed. Each time I get 'Error executing updater binary in zip'. I will have to do some more reading tomorrow.
hello guys my device is a lg v30 tmobile and i had lineage os installed i wanted to flashed it again with different gapps but now when trying to flash rom again it says that my device is not a v30 and if i try to boot or turn off my phone it just boots back into twrp any solution for that im pretty much stock in twrp
el.quechon said:
hello guys my device is a lg v30 tmobile and i had lineage os installed i wanted to flashed it again with different gapps but now when trying to flash rom again it says that my device is not a v30 and if i try to boot or turn off my phone it just boots back into twrp any solution for that im pretty much stock in twrp
Click to expand...
Click to collapse
You may have to LG UP and start over, also you can try one of the stock based roms.
Ainz_Ooal_Gown said:
You may have to LG UP and start over, also you can try one of the stock based roms.
Click to expand...
Click to collapse
how can i get in download mode everytime i try to power off it just reboots to twrp
el.quechon said:
how can i get in download mode everytime i try to power off it just reboots to twrp
Click to expand...
Click to collapse
There should be a option under reboot to just shut off does it try to reboot if you click that?
Ainz_Ooal_Gown said:
There should be a option under reboot to just shut off does it try to reboot if you click that?
Click to expand...
Click to collapse
yes and every options of twrp asks me if i want to install twrp app which is weird
So connecting usb cable, force resetting it, press combo for download mode (volume up + usb cable ?)
doesn't work ?
Or at least fastboot mode ?
connecting usb cable, force resetting it (vol down + power), press combo for fastboot mode (volume down + usb cable)
zacharias.maladroit said:
So connecting usb cable, force resetting it, press combo for download mode (volume up + usb cable ?)
doesn't work ?
Or at least fastboot mode ?
connecting usb cable, force resetting it (vol down + power), press combo for fastboot mode (volume down + usb cable)
Click to expand...
Click to collapse
ill try letting it reboot with the usb cable and see what happens
when twrp reboots it doenst even show the lg v30 screen it just shows a black screen for half a second then it goet straight to twrp
edit: i restored a stock backup and nothing is there a solution that can be done from twrp terminal
el.quechon said:
hello guys my device is a lg v30 tmobile and i had lineage os installed i wanted to flashed it again with different gapps but now when trying to flash rom again it says that my device is not a v30 and if i try to boot or turn off my phone it just boots back into twrp any solution for that im pretty much stock in twrp
Click to expand...
Click to collapse
that's the important part, I don't really know how much the t-mobile models differ from the H930 ones
but there should be fastboot ? download mode ? "factory reset" functionality (via button dance botting into TWRP) ?
el.quechon said:
hello guys my device is a lg v30 tmobile and i had lineage os installed i wanted to flashed it again with different gapps but now when trying to flash rom again it says that my device is not a v30 and if i try to boot or turn off my phone it just boots back into twrp any solution for that im pretty much stock in twrp
Click to expand...
Click to collapse
You might have done what I did which is flash twrp.img in recovery.. it won't go back to initial password screen. I did that and had the same issues.. I recently did it.. now it only restores backups which is how I got lineage or other rooms back.. after wiping the system partition, it also only flashes stock debloated room, but anything else I flash crash system partition.. I'm going to start over but with treble recovery in root process and just avoid messing with it..
lowkeyst4tus said:
You might have done what I did which is flash twrp.img in recovery.. it won't go back to initial password screen. I did that and had the same issues.. I recently did it.. now it only restores backups which is how I got lineage or other rooms back.. after wiping the system partition, it also only flashes stock debloated room, but anything else I flash crash system partition.. I'm going to start over but with treble recovery in root process and just avoid messing with it..
Click to expand...
Click to collapse
i didnt flash recovery i was flashing the custom rom but if i restore a stock rom back up it doesnt work either
el.quechon said:
i didnt flash recovery i was flashing the custom rom but if i restore a stock rom back up it doesnt work either
Click to expand...
Click to collapse
Did you restores the recovery as well? I did that which is suspect source of the problem number 2.. even flashing magisk crash my system partition.. but not the magisk in the stock room, probably cause it's built in.. or any restores.. either way I'm going to start over.. not touching recovery after root & not backing up recovery partition to confirm a few things.. can you flash debloated rom after formatting system partition? Aroma gapps don't work for me but other gapps does.. I found out the hard way cause I didn't see any information on it in the threads.. I read it's a common issue with TWRP recovery on multiple devices..
lowkeyst4tus said:
Did you restores the recovery as well? I did that which is suspect source of the problem number 2.. even flashing magisk crash my system partition.. but not the magisk in the stock room, probably cause it's built in.. or any restores.. either way I'm going to start over.. not touching recovery after root & not backing up recovery partition to confirm a few things.. can you flash debloated rom after formatting system partition? Aroma gapps don't work for me but other gapps does.. I found out the hard way cause I didn't see any information on it in the threads.. I read it's a common issue with TWRP recovery on multiple devices..
Click to expand...
Click to collapse
Got it working luckily my phone was almost dead so once it died tarp started working fine so now everything is normal
el.quechon said:
when twrp reboots it doenst even show the lg v30 screen it just shows a black screen for half a second then it goet straight to twrp
edit: i restored a stock backup and nothing is there a solution that can be done from twrp terminal
Click to expand...
Click to collapse
I had that once when i tried to flash the aroma gapps for pie ?
that kinda ****ed up TWRP, a force reset (vol- + power) did the job for me, as all the reboot/shutdown options in TWRP didnt wanna work.
SGCMarkus said:
I had that once when i tried to flash the aroma gapps for pie ?
that kinda ****ed up TWRP, a force reset (vol- + power) did the job for me, as all the reboot/shutdown options in TWRP didnt wanna work.
Click to expand...
Click to collapse
Exactly what happens to me try the aroma installer from gapps project and everything went down hill now I flashed the stock one they have.
How can I delete Google apps installed by gapps without making other Google apps crash
Did you not have a backup of your rom using twrp before you made the change? Isn't that the whole point of having twrp and a phone with SD card? Always backup your whole phone before making a change. It has saved my phone many times.
Alibaba0101 said:
Did you not have a backup of your rom using twrp before you made the change? Isn't that the whole point of having twrp and a phone with SD card? Always backup your whole phone before making a change. It has saved my phone many times.
Click to expand...
Click to collapse
Yes I had a back up but it was twrp acting up by not being able to boot.
My phone was just booting back to twrp even when pressing power off some how by finally powering off the device (letting it discharge all the way) that was the only thing that fix it me twrp started working fine after that
My twrp has been acting funny/unpredictable. Or I am not doing something right. Mostly has to do with the restore function. I generally have two separate roms backed up in restore. But, lately, I will see only one listed. When I get back to the phone and check in my root manager, I will see them both listed. And then later, it (Rom) "might or might not" return to the restore function area.
But, lately it seems that when I restore the system, I can not open it up in the lock screen (does not recognize the pin). I have to turn the phone off, then use the vol down and power button to get back into twrp. Luckily, I have a couple of roms downloaded in the install section which then does let me flash and reboot, but I have to start new/over.
I don't know if reflashing twrp in recovery will help or not (have never done it).
I'm afraid one of these times I will some how get locked out or not be able to flash a good rom.
gimpy1 said:
My twrp has been acting funny/unpredictable. Or I am not doing something right. Mostly has to do with the restore function. I generally have two separate roms backed up in restore. But, lately, I will see only one listed. When I get back to the phone and check in my root manager, I will see them both listed. And then later, it (Rom) "might or might not" return to the restore function area.
But, lately it seems that when I restore the system, I can not open it up in the lock screen (does not recognize the pin). I have to turn the phone off, then use the vol down and power button to get back into twrp. Luckily, I have a couple of roms downloaded in the install section which then does let me flash and reboot, but I have to start new/over.
I don't know if reflashing twrp in recovery will help or not (have never done it).
I'm afraid one of these times I will some how get locked out or not be able to flash a good rom.
Click to expand...
Click to collapse
when it doesnt recognize your pin, go (in twrp file manager) to /data/system/ and delete the locksettings.db(-sh/-wal) files...
I think that was the path, you can google that too ^^
Thx, SGCMarkus, I did delete just the one db only file. It did away with the pin unlock code on reboot (but I did not do a restore, just a reboot back into my system), so I assume it will work. I will try it when I have time. I think that deletion has to be done everytime in twrp, because the line does reappear the next time I booted back into twrp?
Thx.