Hello every one, i have problems with CUBOT X10 signal coverage, it is very poor or no signal. i took it to repair center they told that resever is good and its baseband driver problem. so i started to search but cant find any info about mediatec baseband update, so diseted to ask THE PROS. so my question would be.
1. Is it possible to update mtk baseband?
2. can i take baseband from other phone with the same chip?
3. is there any difference in basebend version for different region?
4.If i have moly.wr8.w1315.md.wg.mp.v34.p5 to which version i can update teh modem?
5. can i flash rom from diferent phone with the same cpu ram flashmemory? what else should be the same that i could try to use it on my phone
Thanks i advance
ps sorry for my english
Related
hi i flashed my mozart to the 1.28 t-mob rom after this flash i got an bug when i call someone my dislpays keeps locked during the call an i cant unlock it!
and when i go to settings -> about is see Hardware revision number : NA
and radiosoftware version 0.0.0.0! i cant flash any rom i got now always invalid model id! please someone help me!
ps: i got now the nodo update now but its the same problem
Hello,
I still have the same problem.
I hope, we can fix it...
see here...
Michael
what Rom did you have before the 1.28?
why did you put that rom?
Hi,
thats a great question... it´s just to lang ago.
I think it was a 1.25, but I´m not really sure.
is the rom you have put the unbrand one?>
if yes I think you should put 2 roms to make the unbrand not just one.
why dont you try to go back to 1.25
yes, it was. it was first a 1.09 and than a 1.28 i think.
I,ve tried to install many roms and ever the same problem.... after 1% my mobile reboots and the installer on my laptop says: 244 "wrong MODEL ID".
I have the same problem with my mozart
my Phone Informations :
OS Version: 7.0.7004.0
Firmware revision number:2250.09.12803.111
Hardware revision number: NA
radio software version: 5.52.09.16_22.33a50.10U
radio hardware version: 0.0.0.0
Bootloader Version: 1.28.2250.3(113810)
Chip-SOC: 2.2.5.0
hi is any solution for this probleme????
PLEASE help i cant flash any rom and i want to go back to flash costume rom
please heeeeeelp
can anyone help me pleaseeeeeeee
Resolve the problem
Hi!
I had the same problem and solved it with JTAG.
Because I'm new to this forum I'm not allowed to write the URL where to find someone who can help you do a JTAG. To find the website search google with the words: JTAG revolution.
The title of the website is "RIFF Box – JTAG Revolution". On the site you can find a JTAG owner nearby who can help you fix your problem
I paid 300HK$ to get mine fixed!
Good luck =)
Which hspl version u using now? My sugest, fist revert back it into stock rom,after that install cotulla hspl, then install mango.
Sent from my 7 Mozart T8698 using Board Express
is there any working solution for this now? cuz im stuck with this problem for 2 weeks now
Hello everyone,
I address your genius to tell me if anyone knows the baseband MAUI.11AMD.W11.37.SP.V17.F1, 2012/03/14 4:54 p.m. on the phone is Chinese Star galaxy i9220
My problem is that you just made me a gift this phone but the google market is asia version and no way to install the android market European instead, so I will have wanted to extract the rom, the change by changing the android market and then reinject it into the phone, or if it can work, put a rom CyanogenMod without changing the baseband but the unlocking.
I swim a little there because I know the whole procedure but only on sony xperia x10.
If anyone can help me it would be really nice.
belphegor75 said:
Hello everyone,
I address your genius to tell me if anyone knows the baseband MAUI.11AMD.W11.37.SP.V17.F1, 2012/03/14 4:54 p.m. on the phone is Chinese Star galaxy i9220
My problem is that you just made me a gift this phone but the google market is asia version and no way to install the android market European instead, so I will have wanted to extract the rom, the change by changing the android market and then reinject it into the phone, or if it can work, put a rom CyanogenMod without changing the baseband but the unlocking.
I swim a little there because I know the whole procedure but only on sony xperia x10.
If anyone can help me it would be really nice.
Click to expand...
Click to collapse
I don't have this phone but the spec looks very good with 5" screen and the latest MTK 6575 cpu. I'm seriously interested in getting one myself. What is your view of this phone so far? Appreciate your comments. Thanks
i9220+
I need help! Help me find the firmware on the device model i9220+ (75 processor) MTK6575, Android 4.0.3
DEVICE: http://www.androidforcheap.com/i922...inch-capacitive-screen-smart-phone-p-359.html
Firmware available but baseband ?
Wild Cat said:
I need help! Help me find the firmware on the device model i9220+ (75 processor) MTK6575, Android 4.0.3
DEVICE:
Click to expand...
Click to collapse
Check here for the firmware. forum.xda-developers.com/showthread.php?t=1695218&page=47
Btw, if anyone has found answers to the baseband issues,Please post
I've got bad reception. At home sometimes no bars, no reception, or sometimes 1-2 bars. If I get to a window I get 2 bars tops.
Outside it sometimes disconnects and I have to reboot.
Drives me nuts.
I have another older smartphone at home that's 3g - same carrier - full reception.
In Neo V Battery life is bad. At "about phone" I see it changing all the time, I didn't have the chance to check outside, but due the constant disconnections outside I figure it's also changing.
Is changing the baseband the way to go?
The original BB was 4.1.B.0.587 baseband (77)
Now it appears as 8x55a-aaabqoazm-203028g-77 (under "about phone")
I'm running CM10 nightlies
If I put the wrong baseband can it brick the phone?
Should I flash 4.1.B.0.587 baseband (77) on cm10 (JB)?
Any better baseband than 77 (I'm Israeli on a 850/2100 network)?
Lots of question, you don't have to answer all, any help would be greatly appreciated.
veepe said:
I've got bad reception. At home sometimes no bars, no reception, or sometimes 1-2 bars. If I get to a window I get 2 bars tops.
Outside it sometimes disconnects and I have to reboot.
Drives me nuts.
I have another older smartphone at home that's 3g - same carrier - full reception.
In Neo V Battery life is bad. At "about phone" I see it changing all the time, I didn't have the chance to check outside, but due the constant disconnections outside I figure it's also changing.
Is changing the baseband the way to go?
The original BB was 4.1.B.0.587 baseband (77)
Now it appears as 8x55a-aaabqoazm-203028g-77 (under "about phone")
I'm running CM10 nightlies
If I put the wrong baseband can it brick the phone?
Should I flash 4.1.B.0.587 baseband (77) on cm10 (JB)?
Any better baseband than 77 (I'm Israeli on a 850/2100 network)?
Lots of question, you don't have to answer all, any help would be greatly appreciated.
Click to expand...
Click to collapse
As u say it appears on 77 in about phone, its already on 77 baseband of .587 firmware.. I don't know whether you have got the update of .13 firmware in your place but as far as i know, there isn't any ftf file available for .13 firmware.. The new firmware comes with a new baseband too.. So till then 77 is latest.. just give it a check though.. I told you whatever i knew..
Sent from my Xperia Neo V using xda premium
@veepe:
Try different SIM Cards if they give you full reception, it maybe the problem with your SIM Card.
If this doesn't work,
Try reinstalling everything from the scratch. First, Flash ICS .ftf using Flashtool & start your phone.
Check if you have proper network.
If there is proper network, then flash kernel from CM10 zip, Install ROM via Recovery, Then check your network.
Now if the problem occurs, it means the problem is with the CM10 ROM. Then you'll have to wait until it's fixed & stay on stock ROM or try other ROMs...
For more refer this: http://forum.xda-developers.com/showthread.php?t=1590383
well, i tried everything - all basebands, flashed different stock firmwares with original kernels for both mt11i and mt11a (mine) - no improvement.
It's definitely something in the phone, the sim works great in another phone. Tried 3 diff sims in the problematic phone.
I'm thinking it maybe related to a water damage I had a few months ago. I went to a lab right after that for a preventive treatment, maybe something's wrong with the hardware.
If changing softwares isn't working, there is a high chance that this is a hardware problem. You should get it repaired then...
Good Luck!
hi i have a note 3 clone.. with mtk6572, i bricked and now coming to life my phone.. the only problem is i dont have baseband... how and where i can find the baseband its the same moly.v8...the same like the all the chinese phones but i cant find it.
if any body know where i can find it and how to flash.. please.
Hello every 1.
Device: Huawei G740
Problem:
I have no signal on my device, no service at all.
Can't call even emergency, and can't find any network manually.
I guess it's after I'w installed new firmware(stock), and ?maybe? it was wrong region.
It wouldn't be a problem if I could install new rom from my region, but I can't, because my bootloader is locked.
Can't downgrade too.
And i can't find any newest rom for my region the same version I'w installed.
Ofcorse I can't get bootloader code from huawei support. And my recovery is still stock phone rooted.
Maybe it's something about that csc, or maybe I don't need install new rom, just change something.
Please help me:
maybe some1 know how to change region in situation like this, or get bootloader code, or get my region version.
Reading mutch about this, but can't find any sollution.
Sry long post, but if some1 can help I try to give as much info I can, and will give more :good:
more info
------------this is info from dc unlocker
Serial NR. : G8V0214718001**** (same as on my phone's back)
Firmware : M8930V100R001C00B165_AMSS May 21 201421:14:09
----------my phone settings>about shows other information
Serial- other 1
and version G740-L00V100R001C432B178 (it's WEEU version I guess, I live in EEU)