Help me please
My redmi note 3 is stuck on the charging logo.when I try to turn it on it shows mi and then shows the picture of a phone and a USB cable I cannot bypass it ,cannot access recovery. When I try to access recovery it goes to the testing screen .
Anyone who knows the solution to this please help me....:crying::crying:
I think accidently you deleted your twrp recovery.you can give a try by reinstalling twrp via adb tool.
I'm completely noob but you can give a try
Sorry for my bad english
SARATH NAIR said:
Help me please
My redmi note 3 is stuck on the charging logo.when I try to turn it on it shows mi and then shows the picture of a phone and a USB cable I cannot bypass it ,cannot access recovery. When I try to access recovery it goes to the testing screen .
Anyone who knows the solution to this please help me....:crying::crying:
Click to expand...
Click to collapse
tell me d condition of ur phone, whether its rooted, what recovery u use, . did u flash any rom?
ajeshmanu said:
tell me d condition of ur phone, whether its rooted, what recovery u use, . did u flash any rom?
Click to expand...
Click to collapse
No sir I haven't done anything.Its boot loader is still locked.I haven't rooted,or flashed any rom
ajeshmanu said:
tell me d condition of ur phone, whether its rooted, what recovery u use, . did u flash any rom?
Click to expand...
Click to collapse
Can you tell me a way to unlock the boot loader through fastboot...
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
SARATH NAIR said:
Can you tell me a way to unlock the boot loader through fastboot...
Click to expand...
Click to collapse
npredtorch said:
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
Click to expand...
Click to collapse
yes go thru the above guide
ajeshmanu said:
yes go thru the above guide
Click to expand...
Click to collapse
I will try this method. Does this method require to go to EDL?
npredtorch said:
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
Click to expand...
Click to collapse
This guide above is to return back your phone to a working MIUI.
If you just need to unlock bootloader to flash twrp/custom recovery, then Unlock it via official method
http://en.miui.com/unlock/
- Download mi unlocker
- Open it, then login with your Mi account (Prefer to use your phone number in username)
- Reboot to fastboot mode (vol down + power), connect usb phone to pc
-The app will detect your phone once connected, then proceed on unlocking by clicking the button.
-Wait for it to finished
BTW, the guide above is specifically for redmi note 3 quallcomm/sd/pro, if you have different device, please look for your right fastboot rom in the list in the given thread. Good luck!
SARATH NAIR said:
I will try this method. Does this method require to go to EDL?
Click to expand...
Click to collapse
try this one
http://en.miui.com/thread-235865-1-1.html
ajeshmanu said:
try this one
http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
yes you can try this one if you can't access fastboot. good luck!!
npredtorch said:
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
Click to expand...
Click to collapse
I did that and now I have a new problem
The phone is not turning back on.When I tried to turn on it shows mi logo and turns off.when I plug it in to charger there is a red notification light starts to blink .What shall I do..??
I have flashed a fastboot ROM through miflash and now my phone is not turning back on and just a red notification light starts to blink help..
SARATH NAIR said:
I did that and now I have a new problem
The phone is not turning back on.When I tried to turn on it shows mi logo and turns off.when I plug it in to charger there is a red notification light starts to blink .What shall I do..??
Click to expand...
Click to collapse
Did you finished flashing? No errors or something?
Try to check your bootloader if it is unlocked or not, use method 2
https://thebroodle.com/android/how-to-check-your-bootloader-is-locked-or-unlocked/
If it is locked, try to use this step to unlock
http://en.miui.com/unlock/
- Download mi unlocker
- Open it, then login with your Mi account (Prefer to use your phone number in username)
- Reboot to fastboot mode (vol down + power), connect usb phone to pc
-The app will detect your phone once connected, then proceed on unlocking by clicking the button.
-Wait for it to finished
npredtorch said:
Did you finished flashing? No errors or something?
Try to check your bootloader if it is unlocked or not, use method 2
https://thebroodle.com/android/how-to-check-your-bootloader-is-locked-or-unlocked/
If it is locked, try to use this step to unlock
http://en.miui.com/unlock/
- Download mi unlocker
- Open it, then login with your Mi account (Prefer to use your phone number in username)
- Reboot to fastboot mode (vol down + power), connect usb phone to pc
-The app will detect your phone once connected, then proceed on unlocking by clicking the button.
-Wait for it to finished
Click to expand...
Click to collapse
Phone is showing no recovery no fastboot.Just stuck on edl mode.
Then proceed with adeshmanu suggestion, http://en.miui.com/thread-235865-1-1.html
I forgot to mention while flashing the fastboot ROM I pasted a file to the ROM folder to unlock the boot loader.will this be the reason why my phone got stuck in the black screen while the notification led blinks
SARATH NAIR said:
I forgot to mention while flashing the fastboot ROM I pasted a file to the ROM folder to unlock the boot loader.will this be the reason why my phone got stuck in the black screen while the notification led blinks
Click to expand...
Click to collapse
what file did you pasted inside the rom folder? something like a unlock file for bootloader?
Maybe that's the thing why it didn't worked. The steps always work for me whenever I got into something.
Also, are you sure that you've downloaded the right fastboot rom for your device? Are you on redmi note 3 pro too?
npredtorch said:
what file did you pasted inside the rom folder? something like a unlock file for bootloader?
Maybe that's the thing why it didn't worked. The steps always work for me whenever I got into something.
Also, are you sure that you've downloaded the right fastboot rom for your device? Are you on redmi note 3 pro too?
Click to expand...
Click to collapse
I have pasted. The unlock file for boot loader
I am using redmi note3 snapdragon version
SARATH NAIR said:
Phone is showing no recovery no fastboot.Just stuck on edl mode.
Click to expand...
Click to collapse
npredtorch said:
Then proceed with adeshmanu suggestion, http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
proceed with above step...
Here is the link to fastboot rom for redmi note3snapdragon version (kenzo)
http://en.miui.com/a-234.html
and select "Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download"
plz dont paste any other files to rom (first make it boot)
Related
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Edit :-
Thank you all , i managed to unbtick using test point .!!
I know enough to tell you that I'd you can get fastboot yo work, its not bricked. Honestly I don't own the device. I own lg g3. And it might be different for this device but you can try pushing recovery from fasyboot mode using your PC. You might wanna google how to tbh and ask around ppl with similar device if possible. Pushing through fastboot/adb is most common so pushing recovery will format recovery partition and install/push new one. That will get you working recovery. (I hope). Happy flashing.
In fastboot check if bootloader is locked by running the device info command... It is not locked you have hopes... Use fastboot to flash fastboot rom package with modified emmc file and modded image...
Its locked
Only way is to do test point method or take it to a service center
#BATMAN# said:
HELP ! HELP ! HELP !
hard bricked by flashing a miui rom from twrp without deleting the emmc file :crying::crying::crying::crying::crying::crying:
i can only go to fastboot , no recovery , miui logo for 3 seconds
please someone help me !!! :crying::crying:
will the test point work ?
Click to expand...
Click to collapse
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Luiggi79 said:
try 1. this:http://en.miui.com/thread-235865-1-1.html
2. http://en.miui.com/thread-244814-1-1.html
3.http://en.miui.com/forum.php?mod=viewthread&tid=257227&highlight=test%2Bpoint%2Bredmi%2Bnote%2B3
4.http://en.miui.com/thread-245347-1-1.html
Let me know if you have succes!Good luck!
Click to expand...
Click to collapse
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
faced the same problem bro better give it in care if dnt wnt to give it to care just go to( http://en.miui.com/thread-235865-1-1.html ) or try ( http://xiaomitips.com/guide/fix-bricked-redmi-note-3-no-unlock-permission/ ) this if all didnt work go to care bro
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Luiggi79 said:
Steps:
A).On the computer in windows disable driver signature enforcement featrure and turn off any protection like security suites,AV software or firewalls.To disable driver signature enforcement you must open command prompt and type:a)bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS and press enter
b)bcdedit.exe -set TESTSIGNING ON and press enter
c)reboot computer
d) install MI flash after reboot;download it from here :http://en.miui.com/thread-235865-1-1.html
B) On the phone:
1.Hold Vol - and Vol + and plug Usb cable in computer&phone
2.download ADB files from here http://en.miui.com/thread-235865-1-1.html
3.extract files from archive to folder
4. in this folder,where you have extracted adb files press:shift on keyboard and right click on the mouse in the same time and choose "open command window here"
5.in command window type:a)adb devices and press enter
b)adb reboot edl and press enter
Now you are in download mode
6.from device manager install qualcomm driver;it should be seen in other devices section;right click---update driver----navigate to :C/Program files(X86)/XIaomi/Mi flash/Qualcomm/Driver;Note:you need x64 windows computer for this operation
7.start MI flash---right click and run as administrator;browse for rom folder,you need a fastboot rom(the rom need with suffix tgz to be;not zip).Put the tgz archive(rom) in Local Disk C and extract with winrar!!!!!!(use winrar) to folder;rename the created folder to ROM.In MI flash when do browse for folder SELECT ENTIRE FOLDER NOT JUST THE FOLDER IMAGES.OK?
8.in MI Flash window press refresh button from up side;the device should appear on the list
9.in MI Flash windows in the down side of windows tick the litlle circle who say:Flash all
10.Press flash button from up
1.1. Wait until it finish flashing procedure:should appear in the right side from device peration completed succesfully
12.Remove usb cable and press power button on the device;keep the power button pressed until the device give you a vibration,the release it
Click to expand...
Click to collapse
im trying now! hopefully it will work :good::good:
#BATMAN# said:
im trying now , thank you , i will tel the results
didnt work , and i didn't try the testpoint yet because im afried , can some one help me
*when connect via fastboot it shows android bootloader interface ( im new to adb someone helpme with this )
*when connect holding ( volume up+volume down+power ) it shows =HS-USB diagnostics 900E ( i manually updated this driver to 9008 but mi flash dosent show it )
*when trying to flash via fastboot it says "FAILED : remote ; device is locked"
Click to expand...
Click to collapse
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Stuck at mi logo
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
avrrv3689 said:
Device unlocked
bootloader unlocked
twrp working
how to get rid of this
Click to expand...
Click to collapse
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
avrrv3689 said:
finlly got out of it
thanxx
can u suggest a procedure to unlock bootloader and root the device and twrp without bricking or bootloop
Click to expand...
Click to collapse
Read these carefully #DO AT YOUR OWN RISK#
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-instruction-unlock-bootloader-t3355904
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-bootloader-twrp-root-7-2-3-t3359492
http://forum.xda-developers.com/redmi-note-3/how-to/redmi-note3-prokenzo-guiderom-global-t3341102
:good: hit thanks if i helped you :good:
#BATMAN# said:
if you don't need TWRP and want MIUI rom try this http://en.miui.com/thread-267263-1-1.html ...
and
if you don't want miui rom flash the new aosp one
#BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY#
Click to expand...
Click to collapse
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
akhil17kr said:
"BUT DONT FLASH MIUI ROM USING TWRP IF YOU UNLOCKED THE BOOTLOADER UNOFFICIALY"
If bootloader is unlocked officially then can we flash any MIUI recovery ROM using TWRP without need of modifying Recovery ROM (deleting bootloader file , patch boot.img) ? can we switch to any MIUI ROM then easily ?
Click to expand...
Click to collapse
Yes i think you can but im not 100% sure :good::good:
#BATMAN# said:
Yes i think you can but im not 100% sure :good::good:
Click to expand...
Click to collapse
Oh Lol , have asked many people but none of them are sure about this .. but i have asked from mi chat they said once bootloader is unlocked you can't lock it back by flashing MIUI roms as it's security feature . SO we can say unofficial method is problem if you like to switch to between ROM's but official one will not create any problems ..still not sure though have to ask who have done through Official method.
fylim said:
I have the same problem.
I can get Miflash to show when under fastboot but it doesn't show the COM port but the device id similar if you check Fastboot Devices. but can't flash due to device is locked.
I tried QFIL as well but it can't go into Emergency Download Mode.
Anyone Please help.
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
#BATMAN# said:
me too , im still searching for a solution ......:crying::crying::crying::crying::crying:
the only solution i found was the test point but im trying to fix it without opening my phone
i you find anything please let me know !!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Luiggi79 said:
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
To enter in download mode see this youtube video:https://www.youtube.com/watch?v=4Fs5n3W1c8U
---------- Post added at 12:10 PM ---------- Previous post was at 12:07 PM ----------
The solution:
1. Press and hold VolUp+VolDown+Power (all 3 buttons) at the same time.
2. The MI logo will appear for some time, and then disappear, don't release the buttons.
3. The MI logo will then appear briefly, and then disappear. Now release all 3 buttons.
4. Connect the phone to PC, and then proceed to use MiFlash as usual.
Use a 64-bit PC
Take a look here: http://en.miui.com/forum.php?mod=viewthread&tid=228048&page=6#pid4518713
http://en.miui.com/thread-228048-1-1.html
How to enter in download mode see this youtube video :https://www.youtube.com/watch?v=4Fs5n3W1c8U
Click to expand...
Click to collapse
didn't work for me !:crying::crying:
I was using Unofficial Cm13 (kenzo optimized) rom, then I decided to go to miui8 global stable. So, I flashed MIUI8 .zip file using alka twrp.
But after flashing it, my phone didn't boot into system. Mi logo flashed twice with vibration, and that's it. Now I can only go to fastboot mode only.
And when I try to flash fastboot rom using mi suit, it says, " try to connect in normal mode first, then switch.
Please help.!!
Hello, sometimes after installing the new rom the phone slowing on first boot.. try to get on recovery again and then do all format. after this flash the rom. The best way to flash the rom secure is to try fastboost method!!
feikacab said:
Hello, sometimes after installing the new rom the phone slowing on first boot.. try to get on recovery again and then do all format. after this flash the rom. The best way to flash the rom secure is to try fastboost method!!
Click to expand...
Click to collapse
Actually, I am unable to get on to recovery. When I press power+ volume up button, it vibrates, mi logo appears for a second, and then it goes and what is left now is blinking red led light. Also, If I boot into fastboot, and and connect my phone suing usb, The mi pc Suits says, "try to connect in normal mode first, then switch"
shivamg95 said:
Actually, I am unable to get on to recovery. When I press power+ volume up button, it vibrates, mi logo appears for a second, and then it goes and what is left now is blinking red led light. Also, If I boot into fastboot, and and connect my phone suing usb, The mi pc Suits says, "try to connect in normal mode first, then switch"
Click to expand...
Click to collapse
try this http://en.miui.com/thread-235865-1-1.html
if i helped u, please press the thanks button
feikacab said:
try this http://en.miui.com/thread-235865-1-1.html
if i helped u, please press the thanks button
Click to expand...
Click to collapse
Thanks for the support. But I am unable to try this method. because the fastboot download speed is very low.
bro dont take any pressure...go to fstbot mode and check whether your bootloader is relocked or not..i am 99% sure its relocked..just unlock it and you are good to go
ruhul5 said:
bro dont take any pressure...go to fstbot mode and check whether your bootloader is relocked or not..i am 99% sure its relocked..just unlock it and you are good to go
Click to expand...
Click to collapse
yes , it is relocked. But I don't understrand, I have unlocked it with official method. How it can be relocked.?
shivamg95 said:
yes , it is relocked. But I don't understrand, I have unlocked it with official method. How it can be relocked.?
Click to expand...
Click to collapse
just again unlock with the same way you did it first time..means go to fastboot mode..connect the phone to pc..now login on miunlock tool in your pc and unlock...simple
ruhul5 said:
bro dont take any pressure...go to fstbot mode and check whether your bootloader is relocked or not..i am 99% sure its relocked..just unlock it and you are good to go
Click to expand...
Click to collapse
thank you so much.. It worked..
shivamg95 said:
I was using Unofficial Cm13 (kenzo optimized) rom, then I decided to go to miui8 global stable. So, I flashed MIUI8 .zip file using alka twrp.
But after flashing it, my phone didn't boot into system. Mi logo flashed twice with vibration, and that's it. Now I can only go to fastboot mode only.
And when I try to flash fastboot rom using mi suit, it says, " try to connect in normal mode first, then switch.
Please help.!!
Click to expand...
Click to collapse
I was having same situation too bro !!!
flash MIUI rom via MiFlash tool...
install ADB drivers ,
connect usb cable to laptop / pc...
then press both volume buttons at same time (+ and -) and at the same time while pressing keys , insert cable into ur mobile...
this will boot ur phone in EDL mode...
then by using MiFlash tool , flash rom and reboot
I flashed MIUI global 7.1.8 , it worked for me !
rasik107 said:
I was having same situation too bro !!!
flash MIUI rom via MiFlash tool...
install ADB drivers ,
connect usb cable to laptop / pc...
then press both volume buttons at same time (+ and -) and at the same time while pressing keys , insert cable into ur mobile...
this will boot ur phone in EDL mode...
then by using MiFlash tool , flash rom and reboot
I flashed MIUI global 7.1.8 , it worked for me !
Click to expand...
Click to collapse
u dont need to do all these again...just unlock the bootloader and reboot the phone..problem solve
ruhul5 said:
u dont need to do all these again...just unlock the bootloader and reboot the phone..problem solve
Click to expand...
Click to collapse
Ok...
Bro, I'm on official Resurrection Remix based on cm13.
So, if i need to go back to miui 8 (recovery rom of 1.19 gb) i need to
1. Flash miui 8 recovery rom through alka twrp.
2. Boot into fastboot mode.
3. Unlock using mi unlock tool.
4. Switch on my phone (and now its in miui 8)
Am i correct?
I know there is few hundered threads with "unbrick" in title but I read them all and nothing seems to work.
Friend brings me kenzo that he gets since his cousin brick it while trying OTA.
When I power phone its start to load system and it has 3 stages:
1. Show screen with "powered by Android" and 3 dots in the bottom, usualy about 4 min and restart
2. After restart just get black screen with Mi logo in the middle, for about 30 sec and restart
3. Instead of Android with dots bottom have white line progres bar, it takes 4 to 5 min and restart again.
After that stage 2 and 3 repeat for long as you have nervs to wait .
Phone can get in recovery and fastboot mode. And when I put him in test mode just show test screen and cant do anything.
In fastboot mode MiFlash recognize phone but report "device is locked" (try with 20160401 and 20160830).
After that i put him in EDL mode (fastboot reboot-edl) and MiFlash report successful flash. But nothing changes.
I try flashing global stable v8.0.5.0, china stable v8.0.4.0, global dev v6.10.13 and at the end global stable v7.2.5.0.
Any idea welcome. Thx
Have you tried to unlock bootloader? Perhaps install TWRP and do a system/dalvik/cache wipe and install MIUI through that?
banana_bender said:
Have you tried to unlock bootloader? Perhaps install TWRP and do a system/dalvik/cache wipe and install MIUI through that?
Click to expand...
Click to collapse
Cant do that. Even unofficial unlock need phone to be working to enable USB debbuging and accept RSA kay from PC.
Edit: Right now looking for ways to edit boot.img to unlock bootloader in attempt to get any useful recovery.
you can try this guide to flash twrp altogether with rom. after flashing, directly boot to twrp and move to custom rom
abihary said:
you can try this guide to flash twrp altogether with rom. after flashing, directly boot to twrp and move to custom rom
Click to expand...
Click to collapse
I will try... but dont think it will do the job. Will post result little later.
EDIT
It dose not work, just as I think.
All that kind of method/advice need 2 things:
1. Enabled USB debbuging - You cant do that on bricked phone even if you edit boot.img ( ro.debuggable=1 ) because fastboot will not execute command since you will not have option to accept RSA kay from PC on your phone and complete that action.
2. Dev ROM - since you have to enable OEM unlock and that option you have only in dev ROMs. Even Xiaomi official unlock requires that you must do it on dev ROM and that is a reason for "stuck on 50% in unlocking".
I try all that I can think: edit boot.img file, use patch emmc_appsboot.mbn, use edited flash_all.bat and rawprogram0.xml, insert sTWRP and ZCX TWRP in fastboot ROM... and all combination of that. Did it on 7.2.5.0 and 8.0.5.0 stable and 6.8.18 dev (since its last 5.1 ROM that I have).
Most of this attempts ends with "3 stages" explained in the first post. Some just show Mi logo for few sec and restart, once even power off phone. And once I even get phone to go directly to sideload/recovery state showing picture of the phone and usb cable.
Only thing left now is to find info is there difference in accessing to EDL mode between software (reboot-edl), deep flash cable and testpoint. IMHO there is none or little difference. Since software and deep flash can be troubled with bad USB cable or connector or USB board in phone.
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
redminote3 said:
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
Click to expand...
Click to collapse
But my pc dont see phone (mi pc suite , and mi flash ) .
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
still problem
redminote3 said:
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
Click to expand...
Click to collapse
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
innynizty said:
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
Click to expand...
Click to collapse
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
innynizty said:
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
Click to expand...
Click to collapse
which miflash version used for now? pls ensure you use 201604xx (64 bit only) or 20160830 (32/64 bit)
to flash device, already bunch of guide on guide section. pls do some research there.
to unlock your phone, you can follow below unofficial ways or official ways which require to apply to mi server
en.miui.com/thread-253680-1-1.html
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
innynizty said:
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
[email protected] said:
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
Click to expand...
Click to collapse
When i click on edl they only shows me " waiting for device" ?
innynizty said:
When i click on edl they only shows me " waiting for device" ?
Click to expand...
Click to collapse
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
[email protected] said:
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
Click to expand...
Click to collapse
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
innynizty said:
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
Click to expand...
Click to collapse
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
[email protected] said:
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
Click to expand...
Click to collapse
I cant turn on my phone and enable nothink , i know how to root phone and other .
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
[email protected] said:
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
Click to expand...
Click to collapse
I try to install miui and then my phone stuck in xiaomi logo ;/
innynizty said:
I try to install miui and then my phone stuck in xiaomi logo ;/
Click to expand...
Click to collapse
It means it has no ROM installed now....
Even without that turning on you could boot into edl and unlock and flash twrp..
Don't know... Try again and search on net.. Now
Im also facing same issue???
Sent from my ASUS_T00J using Tapatalk
Do like people write before and Its easy to repair, Thanks boys
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.