Related
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Kicroy said:
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Click to expand...
Click to collapse
I have the similar problem with my Redmi3. The Fastboot screen is the only screen that I can get now. Let me know if you have answer. Thanks.
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
EDL mode allows flashing with locked bootloader. Some models have this mode locked, but I think that is not the case with Redmi 3.
Kicroy said:
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
Click to expand...
Click to collapse
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
jokerpappu said:
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
Click to expand...
Click to collapse
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
geuthym said:
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
Click to expand...
Click to collapse
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
jokerpappu said:
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
Click to expand...
Click to collapse
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
geuthym said:
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
Click to expand...
Click to collapse
try flashing official global rom then see if the problem still persists or not
Hey! I am back with some news of my friend!
He tried to run the EDL mode but when he does that the phone simply goes into the bootloop again... He asked a vendor from Aliexpress to get a french rom, is there a way that the phone doesn't have EDL because of the rom or something like that? I mean is EDL a hardware-thing or a software-thing
same problem
cukru said:
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
Click to expand...
Click to collapse
I have same problem, but this way is not work, because bootloader is locked. Im forget for replacing recovery.img in update package with twrp.
I had this problem before few monthes
my solution was to "force" putting this device on EDL mode
I clicked on vol up + vol down + power together and got into EDL mode, then miflash it.
google - xiaomi understanding download mode
it will send you into miui forum
then second method, download mode, it is what I've described
Help me please
My redmi note 3 is stuck on the charging logo.when I try to turn it on it shows mi and then shows the picture of a phone and a USB cable I cannot bypass it ,cannot access recovery. When I try to access recovery it goes to the testing screen .
Anyone who knows the solution to this please help me....:crying::crying:
I think accidently you deleted your twrp recovery.you can give a try by reinstalling twrp via adb tool.
I'm completely noob but you can give a try
Sorry for my bad english
SARATH NAIR said:
Help me please
My redmi note 3 is stuck on the charging logo.when I try to turn it on it shows mi and then shows the picture of a phone and a USB cable I cannot bypass it ,cannot access recovery. When I try to access recovery it goes to the testing screen .
Anyone who knows the solution to this please help me....:crying::crying:
Click to expand...
Click to collapse
tell me d condition of ur phone, whether its rooted, what recovery u use, . did u flash any rom?
ajeshmanu said:
tell me d condition of ur phone, whether its rooted, what recovery u use, . did u flash any rom?
Click to expand...
Click to collapse
No sir I haven't done anything.Its boot loader is still locked.I haven't rooted,or flashed any rom
ajeshmanu said:
tell me d condition of ur phone, whether its rooted, what recovery u use, . did u flash any rom?
Click to expand...
Click to collapse
Can you tell me a way to unlock the boot loader through fastboot...
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
SARATH NAIR said:
Can you tell me a way to unlock the boot loader through fastboot...
Click to expand...
Click to collapse
npredtorch said:
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
Click to expand...
Click to collapse
yes go thru the above guide
ajeshmanu said:
yes go thru the above guide
Click to expand...
Click to collapse
I will try this method. Does this method require to go to EDL?
npredtorch said:
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
Click to expand...
Click to collapse
This guide above is to return back your phone to a working MIUI.
If you just need to unlock bootloader to flash twrp/custom recovery, then Unlock it via official method
http://en.miui.com/unlock/
- Download mi unlocker
- Open it, then login with your Mi account (Prefer to use your phone number in username)
- Reboot to fastboot mode (vol down + power), connect usb phone to pc
-The app will detect your phone once connected, then proceed on unlocking by clicking the button.
-Wait for it to finished
BTW, the guide above is specifically for redmi note 3 quallcomm/sd/pro, if you have different device, please look for your right fastboot rom in the list in the given thread. Good luck!
SARATH NAIR said:
I will try this method. Does this method require to go to EDL?
Click to expand...
Click to collapse
try this one
http://en.miui.com/thread-235865-1-1.html
ajeshmanu said:
try this one
http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
yes you can try this one if you can't access fastboot. good luck!!
npredtorch said:
Press down + power to go to fast boot, insert usb cable phone to pc, open miflash app (download it here http://en.miui.com/thread-272376-1-1.html), select any fastboot rom version (Here is an example, http://en.miui.com/thread-543021-1-1.html , download fastboot rom for redmi note 3 pro, after downloading unzip the file if you see weird extension file just replace it to .zip and extract to see the files). After selecting the fastboot rom directory on miflash, make sure that your phone is detected as a fastboot device (if you can't see anything on the list on the app, recheck the connection), then select save user data on the bottom, then flash if there is an error, select clean all on the bottom then flash. Wait for the flashing to finished.
Click to expand...
Click to collapse
I did that and now I have a new problem
The phone is not turning back on.When I tried to turn on it shows mi logo and turns off.when I plug it in to charger there is a red notification light starts to blink .What shall I do..??
I have flashed a fastboot ROM through miflash and now my phone is not turning back on and just a red notification light starts to blink help..
SARATH NAIR said:
I did that and now I have a new problem
The phone is not turning back on.When I tried to turn on it shows mi logo and turns off.when I plug it in to charger there is a red notification light starts to blink .What shall I do..??
Click to expand...
Click to collapse
Did you finished flashing? No errors or something?
Try to check your bootloader if it is unlocked or not, use method 2
https://thebroodle.com/android/how-to-check-your-bootloader-is-locked-or-unlocked/
If it is locked, try to use this step to unlock
http://en.miui.com/unlock/
- Download mi unlocker
- Open it, then login with your Mi account (Prefer to use your phone number in username)
- Reboot to fastboot mode (vol down + power), connect usb phone to pc
-The app will detect your phone once connected, then proceed on unlocking by clicking the button.
-Wait for it to finished
npredtorch said:
Did you finished flashing? No errors or something?
Try to check your bootloader if it is unlocked or not, use method 2
https://thebroodle.com/android/how-to-check-your-bootloader-is-locked-or-unlocked/
If it is locked, try to use this step to unlock
http://en.miui.com/unlock/
- Download mi unlocker
- Open it, then login with your Mi account (Prefer to use your phone number in username)
- Reboot to fastboot mode (vol down + power), connect usb phone to pc
-The app will detect your phone once connected, then proceed on unlocking by clicking the button.
-Wait for it to finished
Click to expand...
Click to collapse
Phone is showing no recovery no fastboot.Just stuck on edl mode.
Then proceed with adeshmanu suggestion, http://en.miui.com/thread-235865-1-1.html
I forgot to mention while flashing the fastboot ROM I pasted a file to the ROM folder to unlock the boot loader.will this be the reason why my phone got stuck in the black screen while the notification led blinks
SARATH NAIR said:
I forgot to mention while flashing the fastboot ROM I pasted a file to the ROM folder to unlock the boot loader.will this be the reason why my phone got stuck in the black screen while the notification led blinks
Click to expand...
Click to collapse
what file did you pasted inside the rom folder? something like a unlock file for bootloader?
Maybe that's the thing why it didn't worked. The steps always work for me whenever I got into something.
Also, are you sure that you've downloaded the right fastboot rom for your device? Are you on redmi note 3 pro too?
npredtorch said:
what file did you pasted inside the rom folder? something like a unlock file for bootloader?
Maybe that's the thing why it didn't worked. The steps always work for me whenever I got into something.
Also, are you sure that you've downloaded the right fastboot rom for your device? Are you on redmi note 3 pro too?
Click to expand...
Click to collapse
I have pasted. The unlock file for boot loader
I am using redmi note3 snapdragon version
SARATH NAIR said:
Phone is showing no recovery no fastboot.Just stuck on edl mode.
Click to expand...
Click to collapse
npredtorch said:
Then proceed with adeshmanu suggestion, http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
proceed with above step...
Here is the link to fastboot rom for redmi note3snapdragon version (kenzo)
http://en.miui.com/a-234.html
and select "Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download"
plz dont paste any other files to rom (first make it boot)
So, i installed Xposed, and like many people, i got stuck in the logo... No big deal there... Went to look for some help, and it said to go to fastboot, so I went, but it got stuck in the fastboot logo. Then I connected it to the computer and when I try to list the ADB devices I Ialways get an error saying the server is outdated...
I really need some help! I can't find anything online to help me!
Thanks in advance!
Edit: I submitted a bootloader unlock request to Xiaomi earlier today, but I can't see if its approved or not because phone doesn't work
well,
if you are in fastboot mode then the command is "Fastboot Devices", Not "adb Devices"
_____________________________________________
and about boot loop problem try to flash miui fastboot rom.
_____________________________________________
And about bootloader request problem you can go to edl mode and flash miui without any permissions
Thanks:good::good:
nishant2222 said:
well,
if you are in fastboot mode then the command is "Fastboot Devices", Not "adb Devices"
_____________________________________________
and about boot loop problem try to flash miui fastboot rom.
_____________________________________________
And about bootloader request problem you can go to edl mode and flash miui without any permissions
Thanks:good::good:
Click to expand...
Click to collapse
I tried, but i cant seem to go to edl mode through fastboot, any tips? and because of bootloader lock i cant flash fastboot rom with MI Flash
Edl mode needs a specific fastboot version.
For the Redmi Note 3 Pro / Special Edition
Download and extract this package on your PC.
Enter fastboot mode by holding Power and Vol- at the same time. Wait until the Mi Bunny appears, then connect the phone to the PC.
Run reboot.bat in the extracted package. A command prompt will appear. Press a key to reboot the phone to EDL mode.
Upon entering EDL mode, the screen should turn blank. The notification LED might be blinking red. Done.
To get out of EDL mode, hold the Power button for about 10 seconds.
Click to expand...
Click to collapse
Above quote taken from xiaomi reddit wiki.
If the above doesn't work, see the link for deep flash cable, shouldn't be need for kenzo/kate.
How you flashed/installed xposed on locked bootloader is another question?
You may need to update your adb/fastboot version + device drivers(adb)
corkiejp said:
Above quote taken from xiaomi reddit wiki.
If the above doesn't work, see the link for deep flash cable, shouldn't be need for kenzo/kate.
How you flashed/installed xposed on locked bootloader is another question?
You may need to update your adb/fastboot version + device drivers(adb)
Click to expand...
Click to collapse
Ok, so when i try to reboot in edl, it just reboots as normal after screen goes blank...
I installed Xposed with an APK
Sorry if i'm being annoying, but I just want this fixed
KaiZix said:
Ok, so when i try to reboot in edl, it just reboots as normal after screen goes blank...
I installed Xposed with an APK
Sorry if i'm being annoying, but I just want this fixed
Click to expand...
Click to collapse
Mate, watch any video on YouTube. You're not understanding from text instructions.
AtomR said:
Mate, watch any video on YouTube. You're not understanding from text instructions.
Click to expand...
Click to collapse
Can't find any... Recommendations?
EDL Mode: - https://www.youtube.com/watch?v=LDGViyDYPbU
If you can't get into EDL mode, you may need to use the deep flash cable method.
corkiejp said:
EDL Mode: - https://www.youtube.com/watch?v=LDGViyDYPbU
If you can't get into EDL mode, you may need to use the deep flash cable method.
Click to expand...
Click to collapse
I can't get into EDL mode, and I can't make/buy a deep flash cable... I'm getting really scared now...
About ADB, how can I fix it?
KaiZix said:
I can't get into EDL mode, and I can't make/buy a deep flash cable... I'm getting really scared now...
About ADB, how can I fix it?
Click to expand...
Click to collapse
Installing Mi Flash should have put the correct drivers on your PC.
But can be got from here: - https://xiaomifirmware.com/downloads/download-pc-drivers-xiaomi-redmi-note-3/
And I already linked adb/fastboot tools.
IF your comfortable opening your device, there is also a test point method you could try.
http://en.miui.com/thread-244814-1-1.html
Could not find a English video, so maybe try googling more and you might find one.
If not, you could ask at local repair shop, if they would fix it for you. Using Cable/ TP method.
Note for other readers:- MIUI roms need a special version of xposed, for it to work. And installing from an app would more than likely would have use the wrong version. Should never be done on a locked bootloader, only asking for trouble. (Rovo89 is currently trying to bring MIUI support to the official version for nougat roms)
Hi, I moved from custom ROM, pixel experience andriod 10 to miui 11 official.tgz using miflash tool.
When I first boot, I saw. Device manager is currpted, your device is unsafe now. I saw WiFi, rotation sensor not working too.
After a couple of re flashing again. Same problem. No WiFi .
Than I tried again to flash with an option miflash tool , "clean all and lock". This too didn't worked. And my bootloader locked.
Same problems ...
WiFi not working , will tap icon ,but won't connect or find networks
sensor is not working
Saw again at first boot, Find device manager is currpted , you device is unsafe now ,
Now, my bootloader is locked. Tried with old account that have used multiple times . I didn't work.
Signed for new one , through Facebook. When I try to unlock in DEVELOPER OPTION ,
Nothing happen, pop says preparing to add new account.
I tried to mi unlocktool, it says add account device first
I have locked boot now
ismail697 said:
Hi, I moved from custom ROM, pixel experience andriod 10 to miui 11 official.tgz using miflash tool.
When I first boot, I saw. Device manager is currpted, your device is unsafe now. I saw WiFi, rotation sensor not working too.
After a couple of re flashing again. Same problem. No WiFi .
Than I tried again to flash with an option miflash tool , "clean all and lock". This too didn't worked. And my bootloader locked.
Same problems ...
WiFi not working , will tap icon ,but won't connect or find networks
sensor is not working
Saw again at first boot, Find device manager is currpted , you device is unsafe now ,
Now, my bootloader is locked. Tried with old account that have used multiple times . I didn't work.
Signed for new one , through Facebook. When I try to unlock in DEVELOPER OPTION ,
Nothing happen, pop says preparing to add new account.
I tried to mi unlocktool, it says add account device first
I have locked boot now
Click to expand...
Click to collapse
try installing the rom zip
Enviado desde mi iPhone utilizando Tapatalk
ismail697 said:
Hi, I moved from custom ROM, pixel experience andriod 10 to miui 11 official.tgz using miflash tool.
When I first boot, I saw. Device manager is currpted, your device is unsafe now. I saw WiFi, rotation sensor not working too.
After a couple of re flashing again. Same problem. No WiFi .
Than I tried again to flash with an option miflash tool , "clean all and lock". This too didn't worked. And my bootloader locked.
Same problems ...
WiFi not working , will tap icon ,but won't connect or find networks
sensor is not working
Saw again at first boot, Find device manager is currpted , you device is unsafe now ,
Now, my bootloader is locked. Tried with old account that have used multiple times . I didn't work.
Signed for new one , through Facebook. When I try to unlock in DEVELOPER OPTION ,
Nothing happen, pop says preparing to add new account.
I tried to mi unlocktool, it says add account device first
I have locked boot now
Click to expand...
Click to collapse
Hi!
Something very similar happened to me a few days ago. After unsuccessfully trying to install Havoc 3.0 rom (Android 10) on my device, I decided to come back to Miui 11. Then I found this weird message, but instead of "device manager" I think in my case it said "...storage is corrupted...". I was lucky not to lock the bootloader. The solution was flashing via fastboot an old Miui rom, a Marshmallow one. Thay solved the problem. Keep on trying to unlock the bootloader. Good luck!
I had same problem and found an easy solution! Your presist partition is corrupt...do the following:
1. fastboot flash latest MIUI 11 firmware with miflash
-you will see the error message...ignore it for now
-if you are on latest MIUI 11 then ignore step 1
2. turn OFF the phone and boot into fastboot mode (volume down + power)
3. Connect phone to pc
4. download atached archive and unpack to a folder on your pc
-in folder you will see a file named "RedMi Note 4 & 4X EDL Mode"...with phone in fastboot mode and connected run that file...screen on phone will turn off and red light will blink
-now you are in "edl" mode
5. Open miflash tool and select folder that you unpacked from my archive...select flash all and flash your phone
6. After few seconds miflash will show flash done...you are good to go
Phone will turn off...disconnect it and press power button for about 8-10 seconds and phone will boot...done...no more error :good::fingers-crossed:
Hope this helped
Saky22 said:
I had same problem and found an easy solution! Your presist partition is corrupt...do the following:
1. fastboot flash latest MIUI 11 firmware with miflash
-you will see the error message...ignore it for now
-if you are on latest MIUI 11 then ignore step 1
2. turn OFF the phone and boot into fastboot mode (volume down + power)
3. Connect phone to pc
4. download atached archive and unpack to a folder on your pc
-in folder you will see a file named "RedMi Note 4 & 4X EDL Mode"...with phone in fastboot mode and connected run that file...screen on phone will turn off and red light will blink
-now you are in "edl" mode
5. Open miflash tool and select folder that you unpacked from my archive...select flash all and flash your phone
6. After few seconds miflash will show flash done...you are good to go
Phone will turn off...disconnect it and press power button for about 8-10 seconds and phone will boot...done...no more error :good::fingers-crossed:
Hope this helped
Click to expand...
Click to collapse
Will it work for locked bootloader?
Success is disgusted by some people, and will not share any files for free in the future.
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
johnny886 said:
In China, this Phone is called Nubia Play, and the Global version is called Redmagic 5G Lite,
but the mobile phone model is NX651J. Generally speaking, the two are only the difference in ROM.
This is the edl firmware of Nubia Play,CN version.which can repair your phone in edl mode.
All the files are from the official package without any modification!
How to do?
1.Open XiaoMiFlash.exe in the MiFlash folder
2.Click the select button to select the images in this firmware
3.The phone enters edl mode and connects to the computer with a usb cable
（If your phone is in edl mode (9008 mode) for a long time, you must long press the
power button volume + and volume-keys to force the phone to power off, and then re-enter edl mode）
4.Click Loading and see the COMxx that appears, indicating that your phone is connected. Then click Flash
5.Then just wait, prompting flash done！sucess! It means that the flashing has been completed,
long press the power button to restart the phone!
When you see the green notification light next to the front camera light up,
you can release the power button.
Good luck！Enjoy it！！！
Download link：
https://mega.nz/file/eNkVSA6T#2yN_JHtOxB_K4NHVTF3qT_asMMFtnEKBQ6sQ8b-y2nU
Click to expand...
Click to collapse
Only spanish?
GSM KING MAKER said:
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
Click to expand...
Click to collapse
Is global rom? Only spanish?
thequellu said:
Is global rom? Only spanish?
Click to expand...
Click to collapse
Its Not Global Rom , Only Chinese Firmware !
Why do I use scarlet letter when I use flash
The brick tool has worked on a few occasions ,thank you for that but now I need more help or suggestions, when playing between the Spain ROM and China version I lost the baseband and IMEI.Then I thought,locking the bootloader back would help obviously it did not work. Now even though I flashed the unbrick tool though miflasher edl mode I am stuck with a blank screen after the Nubia logo and port Qualcomm 900e in Windows device manager.
Tried already via recovery to flash an update China version or Spain version they flashed fine however still same scenario after Nubia logo.
Not sure what my options are.
Does this work for updating or just brick?
DargorDG said:
Does this work for updating or just brick?
Click to expand...
Click to collapse
It does work to fix the update errors and then use the OTA or USB Otg method
@johnny886
Thank you for the tool.Just wondering if there is a version for Android 11 as i updated to 3.16 android 11 firmware via the usb and now I get your device is corrupt.
Obviously my problem dates back to unlocking and then relocking the bootloader which somehow bricked the phone. Even though before relocking the tool worked once the bootloader was locked the phone wasn't able to boot into system but I was not getting the device is corrupt.
I am hoping for a way to unlock the bootloader or to be able to get back into the system to tick the option in the developer settings hence I am keeping my hope for an updated unbrick tool.
I donwload the file and uncompress it, when select the folder with XiaoMiFlash is shows "could't find flash script".
There are no flash_all.bat file on folder
any help, where is that file?
(mega interrupt the download process)
@ecatombe1234
In my case said the same with regards the script but had flashed fine once started.
Just be careful if you have the bootloader unlocked do not lock it again with the fastboot flash lock.
Thanks for you, really soon, response.
Yes, I try, put phone in edl mode, refresh, flash, and recive [... COM8]:ERROR_UNSUPPORTED_TYPE 0
@ecatombe1234
Usually this is down to the drivers used for Qualcomm Edl mode. Have you installed them ?
Is the EDL mode phone recognized in the device manager as Qualcomm??
Yes, I have correct drivers, I restored the phone last year, but not now.
Xiaomi tool detects phone in bootloader and in edl mode.
Windows detect phone in edl mode as: Qualcomm HS-USB QDLoader 9008 (COM8).
I tried with QFiL too, but I am not sure the config to work qith this, because it detect mobile in edl mode.
Any way, Xiaomi tool has very few config options, I can's understand the "could't find flash script", can any one give us ligth about this error?
It was xiaomi flash tool version, I tried a lot, finally this one works, it is the only one that works with corrupted android 11 version.
Download Xiaomi Flash Tool- v20210226
Mi Flash tool is meant for all Qualcomm powered Xiaomi and Redmi phones on which you can flash MIUI Fastboot ROMs. It works over the Fastboot connection to erase and…
droidfilehost.com
That will work to my dead boot nubia paly 5g?
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Helo guys.. How can I downgrade from android 11 back to android 10 on this device? I recently updated my software but It is not stable yet. Certain apps for example PUBG mobile keep crashing whenever I try to launch it.
Mitchpop said:
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Click to expand...
Click to collapse
I've been following your discussion on this thread and had the same problem after ota update to 3.16.
I also had initially difficulty flashing with MiFlash but finally it worked.
I immediately pressed the flash after entering EDL mode
My phone flashed and entered the Chinese mode. I then went to bootloader by hard pressing the power button and Vol down key.
In bootloader I entered recovery which allowed me to update using OTG. I used a flash with USB C and loaded the phone with NX651J v 22 and my phone is back to the previous settings.