Related
My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
bonbonbillo said:
My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
Click to expand...
Click to collapse
Did u installed p780 drivers into your Pc ?
u must if u want to flash it .
bonbonbillo said:
My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
Click to expand...
Click to collapse
It's easy to fix Just follow my steps. :fingers-crossed:
1.Prepare the rom which was running ok before,for example, for me it was @satanduck 's prerooted TWRP S124 rom.
2.Open the SP flash tool.
3.Load the scatter file from the rom which worked ok for you.
4.Tick the box that says 'DA DL All With Check Sum'
5.Hit Firmware Upgrade
Now is the hardest step
1.Open the cover of your phone.
2.Look for the red reset button which was close to SD card and press it a few times.
3.Connect USB cable to your phone and firmware upgrade should start and wait for the green circle! :good::laugh:
Best luck :good:
bonbonbillo said:
My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
Click to expand...
Click to collapse
What have you done to your phone? Did you install or flash something? Did you change something in system ?
Sent from my Lenovo P780 with TWRP 2.7.1.1
glixbourkt said:
Did u installed p780 drivers into your Pc ?
u must if u want to flash it .
Click to expand...
Click to collapse
Yes, I installed mtk usb drivers. but I´m not sure if it´s ok o no. Because I have to connect the battery and push volume+up button to make it connected. and it´ll disappear immediately in device management window.
stympy said:
What have you done to your phone? Did you install or flash something? Did you change something in system ?
Sent from my Lenovo P780 with TWRP 2.7.1.1
Click to expand...
Click to collapse
Just tried to root, but not completed. and then tried flash to rescue, but not yet get it connected to computer.
tngultimate said:
It's easy to fix Just follow my steps. :fingers-crossed:
1.Prepare the rom which was running ok before,for example, for me it was @satanduck 's prerooted TWRP S124 rom.
2.Open the SP flash tool.
3.Load the scatter file from the rom which worked ok for you.
4.Tick the box that says 'DA DL All With Check Sum'
5.Hit Firmware Upgrade
Now is the hardest step
1.Open the cover of your phone.
2.Look for the red reset button which was close to SD card and press it a few times.
3.Connect USB cable to your phone and firmware upgrade should start and wait for the green circle! :good::laugh:
Best luck :good:
Click to expand...
Click to collapse
I can not get it connected to computer. Only when I push volume+up button,and connect the usb cable, it can be found. But then it disappears immediately in device management window. can not continue to flash.
Hi,
Please verify that you have a correct production date. I got a P780 after 0314. please try the solution on this post
http://forum.xda-developers.com/showpost.php?p=52665841&postcount=16
If this resolves your problem, that keep that preloader. With that you can almost flash every rom that there is with the flashtool.
(i'm very satisfied with the latest rom on needrom Vibeui2.0 (the rom page also offers the new preloader )
Greetz,
btw to try to flash with the new preloader set up the flashtool, push the red button on the back of your phone, connect the phone an release the button. If all the drivers are correct your phone will be flashed. ( this new batch phones gave me a heart attack also , mine wasn't even 12 hours active before i softbricked it )
Re-Mi said:
Hi,
Please verify that you have a correct production date. I got a P780 after 0314. please try the solution on this post
http://forum.xda-developers.com/showpost.php?p=52665841&postcount=16
If this resolves your problem, that keep that preloader. With that you can almost flash every rom that there is with the flashtool.
(i'm very satisfied with the latest rom on needrom Vibeui2.0 (the rom page also offers the new preloader )
Greetz,
btw to try to flash with the new preloader set up the flashtool, push the red button on the back of your phone, connect the phone an release the button. If all the drivers are correct your phone will be flashed. ( this new batch phones gave me a heart attack also , mine wasn't even 12 hours active before i softbricked it )
Click to expand...
Click to collapse
When I push the red button, phone can not be recognized by computer. Only I press the volume-up button, it can be recognized by computer.
I start the flash, then push volume-up button to make it connected, but then got BROM error. I attach the screen picture.
bonbonbillo said:
When I push the red button, phone can not be recognized by computer. Only I press the volume-up button, it can be recognized by computer.
I start the flash, then push volume-up button to make it connected, but then got BROM error. I attach the screen picture.
Click to expand...
Click to collapse
You must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
Check if your phone is produced in 2014. If it is you must use another preloader.
stympy said:
You must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
Check if your phone is produced in 2014. If it is you must use another preloader.
Click to expand...
Click to collapse
Yes, I have the FlashTool v3.1304.0.119. (picture attached)
My phone is produced before 2014.
bonbonbillo said:
Yes, I have the FlashToll v3.1304.0.119. (picture attached)
My phone is produced before 2014.
Click to expand...
Click to collapse
Try to flash with this Flah Tool, and tell me if gives you new errors.
stympy said:
Try to flash with this Flah Tool, and tell me if gives you new errors.
Click to expand...
Click to collapse
Which one? Have you attached any file? I don't see it. Tks.
bonbonbillo said:
Which one? Have you attached any file? I don't see it. Tks.
Click to expand...
Click to collapse
I have attached now.
Sent from my Lenovo P780 with TWRP 2.7.1.1
stympy said:
I have attached now.
Sent from my Lenovo P780 with TWRP 2.7.1.1
Click to expand...
Click to collapse
Same error, when the red color goes to the end, after around 3 minutes, says brom error....4001
bonbonbillo said:
Same error, when the red color goes to the end, after around 3 minutes, says brom error....4001
Click to expand...
Click to collapse
I think you should go to a service store. Thats my opinion.
stympy said:
I think you should go to a service store. Thats my opinion.
Click to expand...
Click to collapse
Trying to find solution here, not to solve only with money in mobile store. Anybody else help?
bonbonbillo said:
Trying to find solution here, not to solve only with money in mobile store. Anybody else help?
Click to expand...
Click to collapse
I thought you have warranty on your phone !
So... this error appear when you try to flash wrong ROM or you have wrong drivers installed. Try to remove drivers you have installed and try to reinstall another driver.
Orrrr.. your phone could be a clone. Just an ideea ...
Could you tell us more about your phone... maybe pictures taken from battery or box who came with ?
USB cannot detect at all
SP driver 1.4, 1.5 cannot work
Anyone can help me please
BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)
this is what i get....
yeemeng said:
USB cannot detect at all
SP driver 1.4, 1.5 cannot work
Anyone can help me please
BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)
this is what i get....
Click to expand...
Click to collapse
Hi. What did happent? Did you try to do something ? Flash for example ?
stympy said:
Hi. What did happent? Did you try to do something ? Flash for example ?
Click to expand...
Click to collapse
i followed the instruction from http://forum.xda-developers.com/showthread.php?t=1943442 and now flash back the original P780_8G_ROW_S124_140403
but now the problem is i had lost my IMEI, and i tried to follow this http://forum.xda-developers.com/lenovo-p780/development/lenovo-p780-imei-rewrite-t2668678 but cannot go into the meta mode in the step 8....
after i pressed vol down + power nothing happen to my phone... the usb keep reconnect and disconnect...
yeemeng said:
i followed the instruction from http://forum.xda-developers.com/showthread.php?t=1943442 and now flash back the original P780_8G_ROW_S124_140403
but now the problem is i had lost my IMEI, and i tried to follow this http://forum.xda-developers.com/lenovo-p780/development/lenovo-p780-imei-rewrite-t2668678 but cannot go into the meta mode in the step 8....
after i pressed vol down + power nothing happen to my phone... the usb keep reconnect and disconnect...
Click to expand...
Click to collapse
Here you are one small tutorial for your IMEI.
Link: https://www.youtube.com/watch?v=4gRAlf--D8E
It is working.
Your IMEI is on the back cover of your accumulator.
THANKS!!! its works~~~
Good forgive my English but this translated into google translate
my problem is the next
My Sony xperia z5 does not turn on after a bad flashing with flash tool
It does not turn on, the red LED does not either, the screen goes black
MTK USB Port (COM11)
With flash tool start red bar but stops with error 4032
I do not have more device features
If anyone has any way to solve this problem would be of great help
rednaxela2 said:
Good forgive my English but this translated into google translate
my problem is the next
My Sony xperia z5 does not turn on after a bad flashing with flash tool
It does not turn on, the red LED does not either, the screen goes black
MTK USB Port (COM11)
With flash tool start red bar but stops with error 4032
I do not have more device features
If anyone has any way to solve this problem would be of great help
Click to expand...
Click to collapse
I think you hard bricked your Android. Is it your Android running on Qualcomm processor. If yes then unbrick your Android using tool studio tool.
Ashwinrg said:
I think you hard bricked your Android. Is it your Android running on Qualcomm processor. If yes then unbrick your Android using tool studio tool.
Click to expand...
Click to collapse
I can not understand your question
rednaxela2 said:
I can not understand your question
Click to expand...
Click to collapse
I mean which chipset your Android running.
Ashwinrg said:
I mean which chipset your Android running.
Click to expand...
Click to collapse
You are referring to if it is working, I do not know if it is at best if what I can tell you is that the pc recognizes the device usb
rednaxela2 said:
You are referring to if it is working, I do not know if it is at best if what I can tell you is that the pc recognizes the device usb
Click to expand...
Click to collapse
Which port PC recognizes when you connect usb
Ashwinrg said:
Which port PC recognizes when you connect usb
Click to expand...
Click to collapse
MTK USB Port (COM11)
rednaxela2 said:
MTK USB Port (COM11)
Click to expand...
Click to collapse
Go to meta mode and flash your stock rom using SP flash tool.
Ashwinrg said:
Go to meta mode and flash your stock rom using SP flash tool.
Click to expand...
Click to collapse
Flash tool error 4032
I was on lollipop stock rom downloades from samsony and recived update from sony while upgrading it hangs up and i have to press power and volume up to rest the phone since then its not responding any more not recharging canit enter flash mode or fastboot or recognized by xperia companion srry for bad English and thanx in advance.
Press the small reset button neer sim until vibrat three times then open flashtool and select ftf and wait for window to connect your device then hold vol down and connect the usb. Flashtool v 0.9.18.6 recommended.
Sent from my D6503 using XDA-Developers Legacy app
Sometimes I manage to make it vibrate 3 times but when I try to connect it to flash tool through vol down in flash mode it won't be detected by flash tool
Does it got recognized as something like "QC_BULK" when connected to the computer when powered off?
Or have you installed necessary drivers for flash mode and fastboot mode before flashing?
Sometimes I get somc flash device otherwise unknown device
And I have flashed this Rom from the same pc 2 or 3 weeks ago
dentist4ever said:
Sometimes I get somc flash device otherwise unknown device
And I have flashed this Rom from the same pc 2 or 3 weeks ago
Click to expand...
Click to collapse
What have you done before its failure?
Sent from my sirius using XDA Labs
Open the pc companion, click "repair software". Follow the instructions from there. It'll format the phone and install the latest firmware. (Needs internet connection)
iXaidyiu said:
What have you done before its failure?
Sent from my sirius using XDA Labs
Click to expand...
Click to collapse
the phone hanged up when upgrading i left it more then half an hour with no response so i have pressed power and vol up and its gone since that
xperia companion is not detecting the phone in repair mode
dentist4ever said:
the phone hanged up when upgrading i left it more then half an hour with no response so i have pressed power and vol up and its gone since that
Click to expand...
Click to collapse
Tried pressing the little red button next to the SIM slot?
iXaidyiu said:
Tried pressing the little red button next to the SIM slot?
Click to expand...
Click to collapse
yes but it turn to nothing
dentist4ever said:
yes but it turn to nothing
Click to expand...
Click to collapse
Is your bootloader unlocked?
Sent from my sirius using XDA Labs
Don't know but I think I didn't unlock it but I have root before
dentist4ever said:
Don't know but I think I didn't unlock it but I have root before
Click to expand...
Click to collapse
Use flashtool or Xperia Companion to restore stock firmware.
Sent from my sirius using XDA Labs
iXaidyiu said:
Use flashtool or Xperia Companion to restore stock firmware.
Sent from my sirius using XDA Labs
Click to expand...
Click to collapse
Seems that you didn't read my post well
I cannot enter flash mode nor fast boot and companion didn't detect the phone
dentist4ever said:
Seems that you didn't read my post well
I cannot enter flash mode nor fast boot and companion didn't detect the phone
Click to expand...
Click to collapse
Thats shouldnt be the case. Or your phone is low battery. Tried offline-charging?
Sent from my sirius using XDA Labs
iXaidyiu said:
Tried pressing the little red button next to the SIM slot?[/QUITTers
Yes with no hope
Click to expand...
Click to collapse
you have warranty sony return ? NO !!! ok test this if you have no solution https://drive.google.com/open?id=0B9es25_rAF5bbDRrYUZsejZOdzQ install ggsetup-3.0.0.7.exe open your back glass and look pic place jumper test point and flash .SIN_FILE_SET with s1tool v2 08.07.2014 ! important disconnect your battery
xrenoix said:
you have warranty sony return ? NO !!! ok test this if you have no solution https://drive.google.com/open?id=0B9es25_rAF5bbDRrYUZsejZOdzQ install ggsetup-3.0.0.7.exe open your back glass and look pic place jumper test point and flash .SIN_FILE_SET with s1tool v2 08.07.2014 ! important disconnect your battery
Click to expand...
Click to collapse
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
PROCESSING ...
SERIAL NUMBER : 3CE8E40B
HARDWARE ID : 04000100E1807B00
HASH :573BA40C7848CC15D672D2ECB560B257CE58FC364B00874BF31973E733339F7C
HARDWARE ID 04000100E1807B00 NOT SUPPORTED
Elapsed:65 secs.
dentist4ever said:
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
PROCESSING ...
SERIAL NUMBER : 3CE8E40B
HARDWARE ID : 04000100E1807B00
HASH :573BA40C7848CC15D672D2ECB560B257CE58FC364B00874BF31973E733339F7C
HARDWARE ID 04000100E1807B00 NOT SUPPORTED
Elapsed:65 secs.
Click to expand...
Click to collapse
you have select s1 emergency mode ?
Hi my device is redmi note 3 snapdragon. i tried installing twrp 3.1.1.1 and then updated it using twrp manager, flashed magisk module. was using lineage os. but when i tried flashing my stock rom using mi flash tool, it is showing as error, and was showing fastboot mode, but when i tried to restart the device the device turned off and only the red notification light is blinking continously.. what was the problem/ Somebody please help me
sreerajklm10 said:
Hi my device is redmi note 3 snapdragon. i tried installing twrp 3.1.1.1 and then updated it using twrp manager, flashed magisk module. was using lineage os. but when i tried flashing my stock rom using mi flash tool, it is showing as error, and was showing fastboot mode, but when i tried to restart the device the device turned off and only the red notification light is blinking continously.. what was the problem/ Somebody please help me
Click to expand...
Click to collapse
Wrong thread mate. Ask in q/a thread
sreerajklm10 said:
Hi my device is redmi note 3 snapdragon. i tried installing twrp 3.1.1.1 and then updated it using twrp manager, flashed magisk module. was using lineage os. but when i tried flashing my stock rom using mi flash tool, it is showing as error, and was showing fastboot mode, but when i tried to restart the device the device turned off and only the red notification light is blinking continously.. what was the problem/ Somebody please help me
Click to expand...
Click to collapse
U have ***cked up ur device mate...may be ur bootloder is locked... And its bricked...Try flashing stock rom via mi flash using edl mode....
panu09 said:
U have ***cked up ur device mate...may be ur bootloder is locked... And its bricked...Try flashing stock rom via mi flash using edl mode....
Click to expand...
Click to collapse
How to enter in edl mode bro?? Bootloader is unlocked and aftr that only i installed custom rom
sreerajklm10 said:
How to enter in edl mode bro?? Bootloader is unlocked and aftr that only i installed custom rom
Click to expand...
Click to collapse
R u officially unlocked or unofficially???.Checkloader status..im sure its locked.miui forum u will find file to reboot ur phone into edl mode
panu09 said:
R u officially unlocked or unofficially???.Checkloader status..im sure its locked.miui forum u will find file to reboot ur phone into edl mode
Click to expand...
Click to collapse
yeah bro its officially only unlocked using mi unlock. after unlocking only i flashed softwares....
sreerajklm10 said:
yeah bro its officially only unlocked using mi unlock. after unlocking only i flashed softwares....
Click to expand...
Click to collapse
Now can u check ur bootloader status? R u able boot in fastboot mode? If yes flash stock ro. (fastboot ) by booting ur device in fastboot mode...
panu09 said:
Now can u check ur bootloader status? R u able boot in fastboot mode? If yes flash stock ro. (fastboot ) by booting ur device in fastboot mode...
Click to expand...
Click to collapse
nothing bro.. its just showing the red notification light is blinking when ever i tried connectiong using data cable
sreerajklm10 said:
nothing bro.. its just showing the red notification light is blinking when ever i tried connectiong using data cable
Click to expand...
Click to collapse
Tried long pressing power button and volume down?? When connected to pc?
panu09 said:
Tried long pressing power button and volume down?? When connected to pc?
Click to expand...
Click to collapse
Yep. Everything.. ?
sreerajklm10 said:
Yep. Everything.. ?
Click to expand...
Click to collapse
When its happened... How much was the battery ? Does it charging if connect to power plug??..
I think its hard bricked....need more info... May be miui forum will help u there r so much like this issue
panu09 said:
When its happened... How much was the battery ? Does it charging if connect to power plug??..
I think its hard bricked....need more info... May be miui forum will help u there r so much like this issue
Click to expand...
Click to collapse
Battery was about 60+ when ever i tried to connect my usb with charger or pc the red notification is blinking very fast.
sreerajklm10 said:
Battery was about 60+ when ever i tried to connect my usb with charger or pc the red notification is blinking very fast.
Click to expand...
Click to collapse
If its not charging then its bricked.... May be hard bricked...is ur pc detecting ur phone com4 or whats the status when connected?? Check in device manager when connected
panu09 said:
If its not charging then its bricked.... May be hard bricked...is ur pc detecting ur phone com4 or whats the status when connected?? Check in device manager when connected
Click to expand...
Click to collapse
Yeah in device manager its showing with some error warning..
sreerajklm10 said:
Yeah in device manager its showing with some error warning..
Click to expand...
Click to collapse
Does your problem solved? I was also facing the same issue.ysyrday I found a solution and I flashed miui 7.2.3 now the beast is on.