Phone hardbrick after flashing pit for wrong variant. Trying to make a debrick image from stock rom. After extracting tar.md5 file i get factoryfs.img modem.bin sbl.bin zimage. No non-hlos.bin. Any idea how i should go about this? Thanks.
youngi2068 said:
Phone hardbrick after flashing pit for wrong variant. Trying to make a debrick image from stock rom. After extracting tar.md5 file i get factoryfs.img modem.bin sbl.bin zimage. No non-hlos.bin. Any idea how i should go about this? Thanks.
Click to expand...
Click to collapse
Have you tried simply reflash stock rom with original pit?
Well since odin mode is not possible i dunno how to go about this.
.....,
MigoMujahid said:
Have you tried simply reflash stock rom with original pit?
Click to expand...
Click to collapse
....,
youngi2068 said:
....,
Click to expand...
Click to collapse
there is no download mode, and you can't use adb because USB debugging isn't on, you're sort of hard bricked your phone, i don't know if there is a software fix for it, but i suggest you ask in Q&A thread of the galaxy s2, maybe someone can have a better way around this.
Related
I used Odin 1.85 to revert to stock ROM. My phone is i9100XXLPX so I downloaded the right ROM for it from androidfirmwares.net. There were two 4.0.3 ROMs for XXLPX, and I tried flashing them both. Both got stuck on Samsung logo.
This phone is barely new and a gift I am very upset, and your help will mean the WORLD to me. I am willing to co-operate the best I can. But please, I need anyone's help! You will be given all the 'thanks' you'd like.
THANKS a lot in advance!
During the Odin Flash you got the green signal from Odin?
Also before flashing did you wipe to factory settings?
Sent from my GT-I9100 using xda app-developers app
THE PROBLEM HAS BEEN FIXED.
How I fixed it:
In recovery, I wiped data (after flashing the ROM) and it booted normally.
Thank you!
I am sorry for the hassle.
Sadly, I'm having the same issue.
I'm coming from CyanogenMod 10.1 and wanted to test the latest stock firmware from Samsung.
My PC is running under Linux and the way I flash the firmware is:
sudo heimdall flash --primary-boot boot.bin --cache cache.img --factoryfs factoryfs.img --hidden hidden.img --modem modem.bin --param param.lfs --secondary-boot Sbl.bin --kernel zImage
The image files are extracted from the I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5
Unfortunately after the flash and reboot the booting is stuck at SAMSUNG logo and no wiping or re-flashing helps. Any ideas what I'm doing wrong?
julandroid said:
Sadly, I'm having the same issue.
I'm coming from CyanogenMod 10.1 and wanted to test the latest stock firmware from Samsung.
My PC is running under Linux and the way I flash the firmware is:
sudo heimdall flash --primary-boot boot.bin --cache cache.img --factoryfs factoryfs.img --hidden hidden.img --modem modem.bin --param param.lfs --secondary-boot Sbl.bin --kernel zImage
The image files are extracted from the I9100XWLS8_I9100XXLS8_I9100FOPLS3_HOME.tar.md5
Unfortunately after the flash and reboot the booting is stuck at SAMSUNG logo and no wiping or re-flashing helps. Any ideas what I'm doing wrong?
Click to expand...
Click to collapse
Try windoze.
Here's the leak, it could get you to your feet before flashing LS8.
At the end I gave up, after the failure to install even the older ICS 4.0.4 official firmware, so no love for me from the Samsung.
Happily, at least I was able to reinstall CM10.1 without issues. The thing that impressed me, after reinstalling the CM10.1, was that my internal card was almost the same as is before the fiasco. I.e. the old folders with the images (from the camera) and the uploaded music was intact!
It seems I have to format the internal sd card before I start flashing the Samsung's firmware.
1gnition said:
I used Odin 1.85 to revert to stock ROM. My phone is i9100XXLPX so I downloaded the right ROM for it from androidfirmwares.net. There were two 4.0.3 ROMs for XXLPX, and I tried flashing them both. Both got stuck on Samsung logo.
This phone is barely new and a gift I am very upset, and your help will mean the WORLD to me. I am willing to co-operate the best I can. But please, I need anyone's help! You will be given all the 'thanks' you'd like.
THANKS a lot in advance!
Click to expand...
Click to collapse
i had the same issue, i flashed recovery-twrp from odin, wiped cache and factory reset. booted up fine
my samsung a105f a10 stucked at samsung logo after i flashed with odin
i did wipe data and nothing fix it. i also tried different firmware with pit file selected but nothing work
please someone help me
1gnition said:
I used Odin 1.85 to revert to stock ROM. My phone is i9100XXLPX so I downloaded the right ROM for it from androidfirmwares.net. There were two 4.0.3 ROMs for XXLPX, and I tried flashing them both. Both got stuck on Samsung logo.
This phone is barely new and a gift I am very upset, and your help will mean the WORLD to me. I am willing to co-operate the best I can. But please, I need anyone's help! You will be given all the 'thanks' you'd like.
THANKS a lot in advance!
Click to expand...
Click to collapse
Restock is impossible if you updated to android 10 due to antirollback. If you cannot go into download mode or download mode just keeps fails when flashing, your emmc is dead.
Happened to me today..
Flashed my Galaxy A51 to the latest firmware using ODIN after I tried a custom ROM on this phone, and it stuck on Logo even after getting pass in ODIN.
The solution is to go back to recovery (stock recovery, not TWRP, no need reflashing firmware etc), wipe cache, data and format.. then reboot.
Hi, my s3 is dead, I need not appear in system status CUSTOM, but I lose the warranty. As an officer I can change it? not allow me to install a stock rom because it gives me the error that there is no pit partition. I can get into download mode. I searched the forum but have not found it. Try putting a stock recovery as solutions, but can not find it to flash it with odin. Greetings and thanks.
flash a pit file. google it
Glebun said:
flash a pit file. google it
Click to expand...
Click to collapse
will not let me flash the file. Pit. Regards
then you're done, it needs a motherboard replacement.
didint know where to post this but yeah move if you need.
So i rooted my phone and in TWRP i thought i was factory resetting and i wiped EVERYTHING including my OS.
Like the mong i am i didnt backup at all. I'm on an S6 edge, SM-G925F and its just stuck on the Samsung galaxy s6 edge screen.
I've tried flashing in odin but i just get an error at the very last bit on hidden.img FAIL!
I've tried sideloading using ADB but i can no longer get into TWRP, only the recovery screen. When i could get into twrp when pushing the system.img (3.55GB) it just says fail protocol.
Someone please help! I'll pay $10 through paypal for who ever helps me!
Teezla said:
didint know where to post this but yeah move if you need.
So i rooted my phone and in TWRP i thought i was factory resetting and i wiped EVERYTHING including my OS.
Like the mong i am i didnt backup at all. I'm on an S6 edge, SM-G925F and its just stuck on the Samsung galaxy s6 edge screen.
I've tried flashing in odin but i just get an error at the very last bit on hidden.img FAIL!
I've tried sideloading using ADB but i can no longer get into TWRP, only the recovery screen. When i could get into twrp when pushing the system.img (3.55GB) it just says fail protocol.
Someone please help! I'll pay $10 through paypal for who ever helps me!
Click to expand...
Click to collapse
Open the firmware with WinRar, and extract the file hidden.img and rename it hidden.img.tar. Now load that file into PDA and flash it. When you turn on the phone it will take a little time to boot up.
Uzair40 said:
Open the firmware with WinRar, and extract the file hidden.img and rename it hidden.img.tar. Now load that file into PDA and flash it. When you turn on the phone it will take a little time to boot up.
Click to expand...
Click to collapse
whats PDA?
Teezla said:
whats PDA?
Click to expand...
Click to collapse
In newer versions of Odin, PDA is called AP.
Uzair40 said:
In newer versions of Odin, PDA is called AP.
Click to expand...
Click to collapse
Oh right. Your method didnt work but after downloading 9GB of files i managed to find a .tar.md5 that actually supported my phone.
Thanks for your help though!
Hello friends, im new to the S6 forum. A fer days back i bought a used S6 Edge from ebay for very cheap. The phone had "software issues" according to the seller. I tought that it would not be so difficult to just download the correct firmware for it and flash it with ODIN, but it seems that it will be a little more complicated than that.
When i turn on the phone, it shoes the samsung s6 edge splash screen and then turns of and on again in a bootloop. When i try to access recovery mode by presing vol up + home + power nothing happens. I only have access to download mode. First i tried flashing arecovery into it, the ODIN process completed succesfully but I still cannot access recovery. I then tried to flash a firmware with ODIN and the process failed from the start. I got a NAND START WRITE FAILED message.
So at this point I really dont know what else to try. I have some sort of experience with LG and HTC phones but not so much with samsung,but if someone can point me on the right direction I think that i will be able to do it. Any help and ideas would be really apreciated!
BTW my S6 Edge is the emerald green version. Ive seen that the color matters somehow...?
Try to flash with pit file included to The latest firmware for the model. ..
Skickat från min SM-G925F via Tapatalk
---------- Post added at 09:17 AM ---------- Previous post was at 09:14 AM ----------
http://forum.xda-developers.com/galaxy-s6-edge/general/g925-pit-files-multi-thread-download-t3171636 there is the pitfile. That was my solution one time.
Skickat från min SM-G925F via Tapatalk
superior888 said:
Try to flash with pit file included to The latest firmware for the model. ..
Skickat från min SM-G925F via Tapatalk
---------- Post added at 09:17 AM ---------- Previous post was at 09:14 AM ----------
http://forum.xda-developers.com/galaxy-s6-edge/general/g925-pit-files-multi-thread-download-t3171636 there is the pitfile. That was my solution one time.
Skickat från min SM-G925F via Tapatalk
Click to expand...
Click to collapse
Thanks! i already tried that but i get NAND Write error no matter what...?
I had the same problem a few weeks ago and I just couldn't find an answer so I had to kind of figure it out myself, I'm going to try to help you as much as I can, Well Apparently you have the g925f so go here
http://forum.xda-developers.com/gal...p-recovery-2-8-7-1-g925f-android-5-1-t3144866
And download the twrp and flash it with Odin, you should be able to flash it without any problem unlike the firmware, when you're done,* you should be able to enter the recovery mode ( vol up + home + power ) Then try factory reset, And it should boot now, If it does, download this rom ( i recommend it because it's really light and it gets you out of trouble as it did to me )
xtrestolite (http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968)
Then flash it with twrp again and everything should be working now
Pd: If for some reason it gets stuck on the setup wizard dont do anything and download the rom from a computer and transfer the file, since you can actually transfer files in the setup wizard. Then install it.
my s6 edge 64Gb SM-G925F / G925FXXU5EQH6 is also bricked please hlep
Hi I need help with my s6 edge 64Gb SM-G925F / G925FXXU5EQH6 S/N RF8G60B9LJT from new unlocked but I am on the UK 3 network.
I never messed with my phone, I got an updated in the background and it crashed.
I could not reboot. It crashed during clear cash, restore factory settings and smart switch.
I took it into Samsung store they reset it, but it is still restarting after a short time.
I took it back and they say it was rooted or messed with. yes by a bad update and so out of warranty now by magic.
I have no choice but to root using odin 3.12.7 and 3.12 using sammobile G925FXXU5EQH6 image
it does not work either.
I think the partition table is messed up as I tried ZEROLTE_EUR_OPEN.pit and SM-G925F H3G pit from sammobile
Still, no luck getting this to unbrick.
Please help and advice
Kind regards David
BrenTeck said:
Hi I need help with my s6 edge 64Gb SM-G925F / G925FXXU5EQH6 S/N RF8G60B9LJT from new unlocked but I am on the UK 3 network.
I never messed with my phone, I got an updated in the background and it crashed.
I could not reboot. It crashed during clear cash, restore factory settings and smart switch.
I took it into Samsung store they reset it, but it is still restarting after a short time.
I took it back and they say it was rooted or messed with. yes by a bad update and so out of warranty now by magic.
I have no choice but to root using odin 3.12.7 and 3.12 using sammobile G925FXXU5EQH6 image
it does not work either.
I think the partition table is messed up as I tried ZEROLTE_EUR_OPEN.pit and SM-G925F H3G pit from sammobile
Still, no luck getting this to unbrick.
Please help and advice
Kind regards David
Click to expand...
Click to collapse
Still having trouble with this?
Please help
callumbr1 said:
Still having trouble with this?
Click to expand...
Click to collapse
Yes please help, I still have a brick for an s6 edge.
BrenTeck said:
Yes please help, I still have a brick for an s6 edge.
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model?record=33A75A0392E611E7963AFA163EE8F90B
Download and flash this firmware with Odin 3.12.7.
If the firmware has 5 files after extracting make sure you use the .CSC file and not the home_csc
7 files after extracting
callumbr1 said:
Download and flash this firmware with Odin 3.12.7.
If the firmware has 5 files after extracting make sure you use the .CSC file and not the home_csc
Click to expand...
Click to collapse
Hi, after extracting the zip I get one tar.md5 file which has
meta-data folder
boot.img
chache.img
cm.bin
hidden.img
sboot.bin
system.img
Also how do I change between .CSC file and home_csc if needed?
Thanks.
BrenTeck said:
Hi, after extracting the zip I get one tar.md5 file which has
meta-data folder
boot.img
chache.img
cm.bin
hidden.img
sboot.bin
system.img
Also how do I change between .CSC file and home_csc if needed?
Thanks.
Click to expand...
Click to collapse
You cannot change between csc and home_csc. It's just some firmwares come as 5 separate files. In your case just flash the .md5 firmware through AP in Odin.
Still no luck
callumbr1 said:
You cannot change between csc and home_csc. It's just some firmwares come as 5 separate files. In your case just flash the .md5 firmware through AP in Odin.
Click to expand...
Click to collapse
Thank, I tried that but still no luck. It just fails each time.
BrenTeck said:
Thank, I tried that but still no luck. It just fails each time.
Click to expand...
Click to collapse
At which part does it fail at?
Fails after hidden.img
callumbr1 said:
At which part does it fail at?
Click to expand...
Click to collapse
Hi Thanks for the help so far, It fails at hidden.img
BrenTeck said:
Hi Thanks for the help so far, It fails at hidden.img
Click to expand...
Click to collapse
Very easy, just unpack the firmware then remove the hidden.img repack it and flash it again. It will pass
corrupted data storage
callumbr1 said:
Very easy, just unpack the firmware then remove the hidden.img repack it and flash it again. It will pass
Click to expand...
Click to collapse
Well, it got further but stuck in a loop. Sometimes saying corrupted data storage, sometimes gets to the new 3 logo.
Do you have the correct re-partition file? I may have messed mine up.
BrenTeck said:
Well, it got further but stuck in a loop. Sometimes saying corrupted data storage, sometimes gets to the new 3 logo.
Do you have the correct re-partition file? I may have messed mine up.
Click to expand...
Click to collapse
If it gets stuck on the 3 logo for a while. Just leave it to boot it can take up to 20 minutes.
Or boot to recovery and wipe data/ cache
If that don't work flash the firmware again along with this pit file
https://mega.nz/#!jEwFmQYb!uK98rLtylYY6zLKgCfuMNQYL4cpcfoSZM1kFGzhRGuw
Put the pit in the correct place and check repartition
callumbr1 said:
If it gets stuck on the 3 logo for a while. Just leave it to boot it can take up to 20 minutes.
Or boot to recovery and wipe data/ cache
If that don't work flash the firmware again along with this pit file
https://mega.nz/#!jEwFmQYb!uK98rLtylYY6zLKgCfuMNQYL4cpcfoSZM1kFGzhRGuw
Put the pit in the correct place and check repartition
Click to expand...
Click to collapse
Just stuck in loop and crashes during wipe data / cash
BrenTeck said:
Just stuck in loop and crashes during wipe data / cash
Click to expand...
Click to collapse
Did you flash the pit?
callumbr1 said:
Did you flash the pit?
Click to expand...
Click to collapse
Yes
I accidentally ticked nand erase all my Galaxy S3 heeellppp I have JIG and my Hardware Buttons are broken except my home and lock button
I have never used the "erase all" option but the jig it should put the phone into download mode where you can try flashing a stock ROM. You may need a pit file though.
audit13 said:
I have never used the "erase all" option but the jig it should put the phone into download mode where you can try flashing a stock ROM. You may need a pit file though.
Click to expand...
Click to collapse
Can you upload one? And some procedures? Thanks!
There are procedures in the general thread about flashing with Odin.
I don't have the i9300 so I don't have access to a pit file.
audit13 said:
There are procedures in the general thread about flashing with Odin.
I don't have the i9300 so I don't have access to a pit file.
Click to expand...
Click to collapse
Ok thanks already fixed my phone flashing complete files