So it has been a VERY, VERY, long time since I attempted to root a device. I admit, that I completely forgot most of what I knew from back in the day rooting like the Motorola OG Droid. Here's the deal. I tried rooting a USC XT1526 and I had no idea what I was doing. I followed the steps through and managed to install TWRP and SU. So I assume I got full root. Well The issue started after I got an UPDATE AVAILABLE message and tried to go through with the OTA Update. When it got to the point of installing the OTA Update, my device turned off like normal but instead of updating, it booted into TWRP recovery. It didn't update at all and when I booted my phone normally, it kept trying to update so my phone turn off (loop) every time it tried to install the update. I did a factory reset and it stopped rebooting. I later tried to flash back to fully stock but I believe I might have downloaded the wrong file because I now have a device with no WiFi. Can someone please help me.
Related
Today I had noticed an update was issued to my phone (Motorola Atrix) which I promptly declined as I have previously flashed my phone and assumed that it would lead to issues. After I declined I told my wife to decline when she received the message as well. Well I guess she ignored me because she came home from work and said her phone doesn't work. Prying her for information she admitted to downloading because she was "annoyed" because it kept prompting her.
So this is what I got: Motorola Atrix, previously flashed about 8 months ago. An over the air update was downloaded. Now when you boot up the phone you get about 2 minutes of use before it prompts to shut down. When it restarts it tries to install the over the air update and fails. Yanking the battery will allow to reboot and access the phone again then repeat.
Is it possible to remove the update and restore the phone?
do you have a nandroid backup? if not you may just have to reflash the rom again
Android311 said:
do you have a nandroid backup? if not you may just have to reflash the rom again
Click to expand...
Click to collapse
I do not. When I boot my phone and try to access Android Recovery I run into the same issue with the failed update so I am not sure if I can reflash the ROM this way. Is there an alternate method?
After countless hours of research, I decided to unlock my bootloader and to root my Motorola Atrix 4G. With success, I was happy to have everything working and installed the Darkside Custom Rom. I let a friend borrow my phone, and they saw the AT&T system update and they decided to install it. They bring back the phone and the system update has finished and was installing. The phone powers off and starts to install the update. 10% into the install, it stops, and I got the little green droid man with the /!\ behind him. I take out my battery, place it back in after 30seconds. It powers on, boots up, powers off and tries to load the update again. I restart it, but this time quickly going into RomManager and starting it up in Recovery Mode. I go to restore the phone using the file I backed up from the TitaniumBackUp app, everything backs up except the system. I plug my phone into my laptop, and everything is in the folder. I performed a system/factory reset, downloaded the last Gingerbread update, but nothing helps. Anything I try to load it says "Installation aborted". No matter if it's the original update or a ROM I download. Looking up other forums, I notice others that have downloaded the Darkside ROM have had the same; if not similar issues. I apologize for the length of this message, but I wanted to put in as much detail as I could so you know exactly what the issue is. I look forward to hearing from someone, and thank you in advance!!!
You probably need to sbf it back to a stock ROM and start over. I had a similar problem when I first got my Atrix and the AT&T update first came out. I had already rooted it and didn't unlock the bootloader yet. It tried to update and bricked the phone. Got AT&T to give me another though as I had just got the thing.
nickdeal said:
You probably need to sbf it back to a stock ROM and start over. I had a similar problem when I first got my Atrix and the AT&T update first came out. I had already rooted it and didn't unlock the bootloader yet. It tried to update and bricked the phone. Got AT&T to give me another though as I had just got the thing.
Click to expand...
Click to collapse
Thanks a ton! How would I go about doing that?
You need to download motorola RSD app to you computer. Search XDA for stock firmwares and download one. You will then need to use the button combo to get in to RSD. Connect the phone to your computer and make sure it recognizes. I had an issue where one of my laptops would not recognize the phone for anything. I had to use a different laptop. Once it's done you should be back to stock. The bootloader should be unlocked still. Just root and flash your ROM of choice.
Sent from my MB860 using XDA App
I've been trying to root my wife's HTC Rhyme and in my efforts, something hosed the WiFi. All I get is "ERROR" under WiFi in the wireless network settings menu. This happened to me once or twice on my incredible and a kernel re-flash fixed it. I really want to root it so that she can have the benefit of being able to completely backup everything. I've tried ZergRush, TocoRoot, SuperTool, OneClick, SuperOneClick... none of it worked. The only thing that I've been able to do successfully is unlock/re-lock the bootloader.
Is it possible to extract the ROM and/or all critical system files from a stock rooted phone and use them to restore another phone that is malfunctioning? I was thinking that if I found someone with a rooted HTC Rhyme who would be willing, they could send me whatever files I would need to completely restore the phone, WiFi and all.
Any help with at least the WiFi issue wold be appreciated. Rooting would be nice too but I don't want to be greedy.
Thanks.
I was able to install an RUU which fixed the WiFi issue, but now the phone is stuck in a boot-loop. I've flashed it three times (doing it twice each attempt) but its the same result every time. The phone boots normally the first time, then goes into loop on the next restart. Could be the wrong RUU, could be corrupted or maybe I'm doing it wrong. I don't know.
Please... Any suggestions would be most appreciated.
I fixed it.
RuLEoF2 said:
I fixed it.
Click to expand...
Click to collapse
So have you finally rooted your Rhyme successfully? Which tool did you use? Thanks!
itandy said:
So have you finally rooted your Rhyme successfully? Which tool did you use? Thanks![/QUOTE No root, but it's working and back to No root, but it's working and back to factory condition. factory condition.
I used CWM recovery to format all partitions I used CWM recovery to format all partitions (data, system, cache, devlog, etc.) as well as (data, system, cache, devlog, etc.) as well as the sdcard. the sdcard. Once that was done, I relocked the Once that was done, I relocked the bootloader and ran the RUU. bootloader and ran the RUU. This time I went This time I went through the entire setup process for the phone through the entire setup process for the phone (activation, market account, WiFi and so on) (activation, market account, WiFi and so on) without rebooting first. without rebooting first. After the setup, I After the setup, I rebooted and I started normally. rebooted and I started normally. About 20 About 20 minutes later, I got an android OTA update of minutes later, I got an android OTA update of some kind and now its fine. some kind and now its fine.
Not sure why setting up the phone would make Not sure why setting up the phone would make a difference, but formatting the partitions and a difference, but formatting the partitions and going completely clean-slate is probably what going completely clean-slate is probably what did the trick. did the trick. Something must have been stuck Something must have been stuck in memory from the first failed attempt and it in memory from the first failed attempt and it was corrupting the following attempts in some was corrupting the following attempts in some way. way.
I'd still like to root it, but anyway... it's fixed and I'd still like to root it, but anyway... it's fixed and my wife's is glad to get her phone back. my wife's is glad to get her phone back. Happy Happy ending. ending.
Thanks to all for your assistance.
Click to expand...
Click to collapse
RuLEoF2 said:
itandy said:
So have you finally rooted your Rhyme successfully? Which tool did you use? Thanks![/QUOTE No root, but it's working and back to No root, but it's working and back to factory condition. factory condition.
I used CWM recovery to format all partitions I used CWM recovery to format all partitions (data, system, cache, devlog, etc.) as well as (data, system, cache, devlog, etc.) as well as the sdcard. the sdcard. Once that was done, I relocked the Once that was done, I relocked the bootloader and ran the RUU. bootloader and ran the RUU. This time I went This time I went through the entire setup process for the phone through the entire setup process for the phone (activation, market account, WiFi and so on) (activation, market account, WiFi and so on) without rebooting first. without rebooting first. After the setup, I After the setup, I rebooted and I started normally. rebooted and I started normally. About 20 About 20 minutes later, I got an android OTA update of minutes later, I got an android OTA update of some kind and now its fine. some kind and now its fine.
Not sure why setting up the phone would make Not sure why setting up the phone would make a difference, but formatting the partitions and a difference, but formatting the partitions and going completely clean-slate is probably what going completely clean-slate is probably what did the trick. did the trick. Something must have been stuck Something must have been stuck in memory from the first failed attempt and it in memory from the first failed attempt and it was corrupting the following attempts in some was corrupting the following attempts in some way. way.
I'd still like to root it, but anyway... it's fixed and I'd still like to root it, but anyway... it's fixed and my wife's is glad to get her phone back. my wife's is glad to get her phone back. Happy Happy ending. ending.
Thanks to all for your assistance.
Click to expand...
Click to collapse
How did you get the ruu to run i keep getting a error 140 wrong bootloader version i tried ruu 1.26.605.11 and 1.26.605.6 i attempted to flash a ics rom and the phone got stuck on the splash screen so then i used my backup i made before i flash the ics rom and wouldnt boot so i extracted the boot.img from the ruu and flashed it to get the phone back up and running the phone is still rooted but i have no wifi no bluetooth no cam i been searching everywhere for a rhyme kernel bt no luck if anyone could help that would great
Click to expand...
Click to collapse
Hey all.
So just a few hours ago, I was running rooted stock, as per the guide in the development section. I then installed twrp, and attempted to flash a ROM, which resulted in my phone not booting.
Since then, I got into recovery, attempted a factory reset (which didn't work), and ended up using Odin to restore to stock.
So now I'm sitting on the stock image, unsure if I have root. Everything seems to work fine, but is slow. Also, I cannot enable wifi (the switch goes on for a split second, then back to off).
Is there a way I can uninstall twrp, and go back to complete and total stock?
If it's relevant, I get a constant "This device has detected an application attempting unpermitted actions..." error.
Thanks guys!!!
UPDATE: It still has root access.
UPDATE 2: I'm finding some similar issues people were having with the T-Mobile version (http://androidforums.com/t-mobile-g...connect-wifi-prevention-information-help.html) though I'm not sure whether I can follow those solutions. I will wait until someone can advise me on this.
It sounds like you didn't installed the complete stock image, that the stocked rooted image is installed. Have you done factory reset?
wolfgrrl said:
It sounds like you didn't installed the complete stock image, that the stocked rooted image is installed. Have you done factory reset?
Click to expand...
Click to collapse
I tried the factory reset option from within twrp recovery, which doesn't fix any of these issues I'm having with constant security alerts or Wifi.
Got it fixed by doing this:
http://forum.xda-developers.com/showthread.php?t=2301259
I thought you guys might find this amusing, and hopefully it will help some people that get into a similar situation as myself. First, a little background - I rooted and installed Alliance Rom years ago back before the bootloader was unlocked. This worked amazing for me for a long time but I've recently had some weird issues with my phone so I decided to do a factory reset.
I went into settings, clicked factory reset, and then my phone got into a boot loop on recovery. I remember from before I had to do a regular boot then click recovery at the prompt instead of doing the factory recovery so I did that.
Instead of doing a normal wipe, I wanted to wipe everything on my phone and start from scratch so I did the full wipe (in what I think was TWRP or safestrap or whatever). When I went to reboot my phone it had a message like "are you sure? there's no OS installed" and I clicked ok. Well now I couldn't get the phone to boot into anything except download mode so at least I can use Odin.
I'm frantically searching google to try and find ways to install some sort of recovery so I could load AllianceRom again since I still had the zip file for it. Eureka, I found TWRP for my phone! I tried to flash TWRP through Odin but that doesn't work because my bootloader wasn't unlocked.... I remember this from last time ... all of the places I found online to install any sort of recovery required the phone to be booted into android.
So I'm clicking around and someone has a recovery randomly posted in a thread so I install it thinking, what the hell, what's the worst that could go wrong. So I install it through Odin and boot into normal recovery and I get this message saying my phone has been tampered with and to go to a verizon store immediately! Oops... upon further investigation (looking at the download screen), I tripped the knox flag... oh well, it's not like my phone is in warranty anymore (I got it on release day).
I search around looking for what I should do next and I found a thread that talked about being on complete stock, rooting, then unlocking the bootloader. I download all the files I need (newest firmware here - https://www.sammobile.com/firmwares/galaxy-note3/SM-N900V/ and thread here - https://forum.xda-developers.com/ve...guide-ob6-of1-root-bootloader-unlock-t3439010) to go back to stock and flash in Odin. Actually I didn't download from sammobile.com because it was downloading too slow so I just googled the file name and found it somewhere else faster, go figure.
Everything seems to be going ok then all of a sudden FAIL in Odin... Ahhh what the heck do I do now? Try again obviously! Second try works woo hoo! Phone start booting up, things are looking good!!! hooray!! But wait... it's taking forever to start and it's stuck on the Verizon logo... uh oh... taking way too long to boot up so I pull the battery and try again. Boots right in saying that android is upgrading so I think I'm finally in the home stretch here.
I try to run the ArabicToolApp for Root but I installed the latest firmware which isn't supported DAMN IT! Downloaded the correct firmware (OB6!), flashed in Odin, same problem before where it was stuck on the red verizon screen, pulled battery, rebooted, finally time to get root!
Phone finally boots into OS and I get a popup "unfortunatley com.google.process.gapps has stopped" great... and it keeps coming up over and over again after I hit ok... just my luck! Reboot again to see if that fixes the issue. Seems weird that I didn't have to go through all the initial setup stuff I did on the other version I installed... hmm... or maybe it was because I pulled the battery on the red verizon screen? Whatever. I somehow manage to get to options to do a factory reset and I let the verizon screen stay on a while this time. I'll go take my contacts out and give my wife some love while I wait
Come back and the phone is at the setup wizard, this is good news. Enabled USB debugging, installed root, done! Thank god!
Next I want to unlock the bootloader. I follow the steps here which aren't very clear (I'm guessing on purpose for novice computer users) - https://forum.xda-developers.com/ve...l/official-note-3-verizon-bootloader-t3359370
1. I installed eMMC from the play store to make sure my CID started with a 15, it does so I know I'm good to use the hack.
2. I installed both files in the unlock kit (adb and driver setup)
3. Fired up adb, navigated to where I had unlock_n3, and ran through the first part of the code once, reboot my phone, checked that the CID was the developer CID, and then ran the second part of the code three times before it worked
I verified the bootloader was installed correctly by trying to install TWRP through Odin, which worked!
I'm going to try out Jasmine Rom since it's a popular one that is on 5.0. My SD card only showed 30 megs free or something like that, so I formatted it from within android and copied the zip file over and installed the Rom through TWRP. Rom installed just fine, so I did one last factory reset which worked great and I think I'm finally good to go!
If you have any questions or run into any issues feel free to reply here and I'll try to help as much as I can.
Glad it worked out for you in the end.
From making a few mistakes I know that sinking feeling "oh no, what have I done?"
FWIW, the bootloader unlock method (in principle) works from nearly ANY ROM which is rooted - so, you would have saved yourself a bunch of time if you had started with that before you wiped the Alliance ROM. So long as you have root and a CID value that starts with 0x15, you just need root privileges - no need to return to stock and re-root.
(The "in principle" part is that there were several bugs in the "safety checks" portion of the unlocker binary that were sensitive to the OS revision, so you might have to search through the unlock thread to find a version of the unlock binary that is compatible with whatever rooted ROM is on the phone when the unlocking is attempted.)
good luck
PS The AryaMod ROM (w/ phantomOne kernel) is pretty solid - Marshmallow w/ S-Pen apps, too! As with any other dev ROM, there are a few sharp edges, but mostly everything works (except NFC).
.