Related
Just ran across Floatify in the Playstore: https://play.google.com/store/apps/details?id=com.jamworks.floatify
Seems to work on the lockscreen the way Android Marshmallow notifications should work! I disabled the heads up setting in the app, but in my 5 minutes of playing with it, the lockscreen works GREAT! You can keep your ZTE lockscreen, the notifications just display on top of it and you can swipe them away. You do disable the stock notifications, but this has worked fine in my email and text test as well as a few Dropbox notifications.
It lets you expand the notifications too.
Only down side I've seen so far, you need the "pro" version ($1.49) to get the notifications to stack on top of each other.....Otherwise, with the free version it still works....But the newest one is on top, when you swipe it away there is one under it....so if you get 6 notifications, to see the first one you'll need to swipe away all the others on top. I've already purchased the "pro" version, otherwise I'd test that setting out to make sure I'm correct in telling you this?
But all's I know, I'm really happy with this $1.49 app!
Nice find! How well does it handle music playback notifications?
does it work with the fingerprint scanner?
martinmagnus said:
does it work with the fingerprint scanner?
Click to expand...
Click to collapse
it does not replace the lockscreen, it just creates notifications on the original one. Thx for the hint, very nice app
JeromeLeung said:
Nice find! How well does it handle music playback notifications?
Click to expand...
Click to collapse
Well, when I first tried it, it didn't show anything... Then when I was about to post this, I checked again and it shows up just like a standard notification (along with the others).
I'm using Shuttle+ and the top one is the music notification. No controls, just "what's playing".
Lol.....It even reminds me that my wife took the Kohl's card last month and used it (busted).
Best solution I've seen so far.
tele_jas said:
Just ran across Floatify in the Playstore: https://play.google.com/store/apps/details?id=com.jamworks.floatify
Seems to work on the lockscreen the way Android Marshmallow notifications should work! I disabled the heads up setting in the app, but in my 5 minutes of playing with it, the lockscreen works GREAT! You can keep your ZTE lockscreen, the notifications just display on top of it and you can swipe them away. You do disable the stock notifications, but this has worked fine in my email and text test as well as a few Dropbox notifications.
It lets you expand the notifications too.
Only down side I've seen so far, you need the "pro" version ($1.49) to get the notifications to stack on top of each other.....Otherwise, with the free version it still works....But the newest one is on top, when you swipe it away there is one under it....so if you get 6 notifications, to see the first one you'll need to swipe away all the others on top. I've already purchased the "pro" version, otherwise I'd test that setting out to make sure I'm correct in telling you this?
But all's I know, I'm really happy with this $1.49 app!
Click to expand...
Click to collapse
Very nice. BTW, how did you change your font? & what is the font?
cputoys said:
Very nice. BTW, how did you change your font? & what is the font?
Click to expand...
Click to collapse
It's a flashable .zip font called "ChinaCat". You have to be rooted to use it, since it flashed via TWRP.
Yes, amazing. I hated that bell, now it's six feet under.
I just wanted to provide a different option for anybody who wants the finger print scanner + album art to work.
Hi Locker.
Main benefits: full album art with the audio controls and works with finger print scanner.
The main downfall is if you want to do the finger print scanner, you have to have ZTE's stock lock screen enabled which means you'll have two lock screens.
It works two different ways.
1. If you press the power button, it'll bring up the ZTE lock screen with the bell. If you have your lock screen set at swipe, it'll then go to the Hi Locker lock screen which will display notifications. If you press the button, you can unlock by using the finger print scanner twice. So, ultimately, using the power button and swiping immediately will bring you to the next screen and that will have all your notifications including album art taking over the wall paper and audio controls.
2. If you use the finger print scanner, it'll bypass the ZTE lock screen and go straight to the Hi Locker screen. Now you'll be able to function with all the other above. You can then use the finger print scanner a second time and you'll completely unlock the phone.
It's a weird way but this was the best way to get the finger print scanner and album art going at the same time... until ZTE releases something.
tele_jas said:
Well, when I first tried it, it didn't show anything... Then when I was about to post this, I checked again and it shows up just like a standard notification (along with the others).
I'm using Shuttle+ and the top one is the music notification. No controls, just "what's playing".
Lol.....It even reminds me that my wife took the Kohl's card last month and used it (busted).
Click to expand...
Click to collapse
swipe the music notification down and you should see the controls
Great!
tele_jas, Thanks for sharing this one! I think it's much better than having a second lockscreen. I left my native notifications turned on,but just turned on the "Show on the lock screen" option (to kill the bell). Then, inside Floatify's settings, under Heads-up, then under "When", I disable "On Notification", but left "On Lockscreen" set to All Notifications. So I have Floatify only on top the lockscreen, and the default system notifications everywhere else.
Great find!
Thanks for this thread, love this app it's a massive improvement to the Axon 7.
celticchrys said:
tele_jas, Thanks for sharing this one! I think it's much better than having a second lockscreen. I left my native notifications turned on,but just turned on the "Show on the lock screen" option (to kill the bell). Then, inside Floatify's settings, under Heads-up, then under "When", I disable "On Notification", but left "On Lockscreen" set to All Notifications. So I have Floatify only on top the lockscreen, and the default system notifications everywhere else.
Great find!
Click to expand...
Click to collapse
This works great, thank you!!
OP, thanks. Love this app, no bell, dark notification theme and can increase notification text size.
Sent from my ZTE A2017U using Tapatalk
Floatify = GREAT "notification bell" replacement (so far)!
Looks very promising.
Just bought it.
Just one question how disable the bell icon being on lock screen or it's not possible to all time hide it?
Edit: I don't know but find it very complicated through setting.
Too many settings and similar option
Missing simplicity from the app.
celticchrys said:
tele_jas, Thanks for sharing this one! I think it's much better than having a second lockscreen. I left my native notifications turned on,but just turned on the "Show on the lock screen" option (to kill the bell). Then, inside Floatify's settings, under Heads-up, then under "When", I disable "On Notification", but left "On Lockscreen" set to All Notifications. So I have Floatify only on top the lockscreen, and the default system notifications everywhere else.
Great find!
Click to expand...
Click to collapse
Sorry but I can't find that option you are talking about.
Can you please write step by step.
Thanks.
Sent from my iPad Air 2
When you have two Gmail notifications, is there any way to react to each of them from the lockscreen? I have the pro version and thanks.
Sent from my ZTE A2017U using Tapatalk
Floatify = GREAT "notification bell" replacement (so far)!
Just uninstalled and got refund.
Sorry I find the app too messy and complicated with dozens of similar option and settings.
Prefer next lock screen as lock screen replacement and I'm using glimpse notification to wake up screen on notification alert and double tap to sleep from lock screen.
Or just wait if being stock until ZTE make the bell optional witch not being late until released via software update.
Sent from my iPad Air 2
Floatify = GREAT "notification bell" replacement (so far)!
How disable not interact badly on lock screen when pull down notification while playing music??
Also interact badly with player pro widget on notification center when pull down while playing music.
I don't know how disable music player widget on floatify.
Even disable player pro widget on player pro it continues to show both player pro and floating app music player widget together on Notification Center.
Sent from my iPad using Tapatalk
Sorry to those not happy with it and are asking me questions on how to use it?..... I liked it and found it useful and posted the link. I don't really know much of, or any of the technical stuff about it, I just set it up and left it alone and haven't touched it since day one. No, it's not perfect and not as useful as real stock android notifications, but I still like it MUCH better than the "bell".
I do know when you "start the app", you'll get the option to disable the stock android notifications (the three choice menu). You want to choose to not show any notifications and this will disable the "bell". There is someone on here uses it a slightly different way and left instructions on how they used it.
[APP] PaceOn v5.4 - Keep Pace/Stratos screen on, Lock Screen, Quick Switches & more
PaceOn v5.4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sometimes, I just want my Aamzfit Pace to stay awake a bit longer, so I make this app.
PaceOn is designed specifically for Amazfit Pace to keep its screen on and unlocked as long as I want. It also works on Amazfit Stratos.
Surely, keeping the screen on affects the device's battery, but for whatever reason you may want it.
For me, it's quite useful when transferring files via wifi, needing to see some app screen details for a period of time or just always showing off that beautiful watchface.
This is the first app of my Pace(X) series (On, Off, Up & Down).
Disclaimer:
I am not responsible for any bad things caused by using this app, and blah, blah, blah.
Instruction:
Just sideload the app. Root is not required.
This can be done using ADB.
Here is how.
To uninstall:
adb uninstall com.anox.paceon
Features:
On/Off = PaceOn service keeping the watch awake and unlocked
The service can be automatically turned off on a selectable schedule.
Dim = Allow the screen to dim
Launcher = Launcher Service
Once activated, a small triangle area at the bottom left of the screen becomes a launcher area. The area is only visible on PaceOn screen, but active on any screen.
- Swipe up from the area (on any screen) launches PaceOn app.
- Double tap toggles PaceOn service on/off without opening the app.
- Swipe right to lock the screen.
- Swipe diagonally (roughly 45 degrees upward to the right) to bring up Quick Switch panel
Please see the last attached image for the instruction. The service will automatically turn on after booting, if the option was previously on before the boot.
Lock screen
The idea here is to have a transparent lock screen to protect the screen on from touches or taps. When this lock screen is on, the watch is still fully awake.
- To activate the lock screen, swipe right on Launcher area.
- To unlock, just double tap anywhere on the lock screen.
Return Home option
This is a workaround to the notification issue (raised by a few people). When receiving a new notification, the notification screen won't automatically be dismissed and another notification won't trigger a vibration. This can only be turned on, when both PaceOn & Launcher services are selected.
When this option is selected, it will have an effect only when the lock screen is on. After activating the lock screen, the watch will return to the home screen (from any screen) in every 30 seconds.
Bear in mind "this is supposed to consume more battery power."
Auto On... = Auto On When Charging option (off by default)
When turned on, PaceOn service is automatically activated when the watch is plugged into a power source, and deactivated when unplugging it. This option always keeps the screen fully on (not dim) to get rid of the system charging animation. This is designed to work only if PaceOn service is NOT already on.
How about a Pace as a desk clock
Quick Switch panel
- Swipe roughly 45 degrees upward to the right from Launcher area to bring up Quick Switch panel which contains:
1) Brightness Seekbar
Quickly set the screen brightness to any value from 0 to 255 or to Auto Mode.
2) Bluetooth switch
Now, the Bluetooth can be turned on/off at will.
3) WiFi switch
Yes, the wifi too can be turned on/off at will.
- To dismiss Quick Switch panel, just tap on the brightness number or swipe the panel away to the right.
These switches work independently of the system settings. They can even turn on when Airplane mode is on.
How about a quick glance to check if your bluetooth/wifi is on (just like your phone Status bar)
CXN svc. = Connection service
The Connection service improves the bluetooth/wifi connection visibility. It lets us know when bluetooth/wifi is connected/disconnected with a toast message and vibration (only vibration, when screen off). It also tells us what device/AP the watch is connected to/disconnected from.
The service will automatically turn on after booting, if the option was previously on before the boot.
Now, we always know what the bluetooth/wifi on our watch is up to.
Usage:
To enable PaceOn service (to keep the screen awake and unlocked)
- Open the app
- Tick []On/Off (Optionally, tick []Dim)
- To activate Launcher service, tick []Launcher
- Click OK. PaceOn service will start with a confirmation message.
- The app will then be put into the background.
- Then, do whatever you want. The screen will stay unlocked as long as PaceOn service is active.
While PaceOn service is active, the watch can be forced to sleep by pressing the power button from Home screen. Waking up the watch will also reactivate PaceOn service.
To turn PaceOn service off
If Launcher service is active, just Double tap on Launcher area.
If not, Open the app, de-select []On/Off and click OK. PaceOn service will stop with a confirmation message and the app exits.
To turn Launcher service on/off
- Open the app, toggle []Launcher and click OK. Launcher service will start/stop and the app exits.
Note:
- While the app's UI is in the foreground, the screen stays on.
- The app (any app for that matter) can be killed by Android system if the resources are needed. If killed, the "Keep Screen Unlocked" effect will also be lost.
- The app is free for personal use.
Changelog:
Version 1.0
Initial release
Version 1.5
UI changes
- Theme change
- Some wording changes (hopefully clearer)
- New icon
Toast notifications added
- confirmation messages when starting/stopping the PaceOn service
Internal Improvement
- Better app instance handling
- More persistent, less likely to be killed by system
- Lower resource usage
- Optimised and smaller apk
Version 2.0
UI changes
- Launcher option added
- Lockscreen option added, but disabled in this version
- Bigger OK button for your convenience
Launcher Service added
Launcher Service puts a triangle area located at the bottom left of the screen. Once activated, the area becomes visible only on PaceOn screen, but it is active on any screen.
- Swipe up from the area (on any screen) launches PaceOn app.
- Double tap on the area (on any screen) turns PaceOn service on/off without opening the app.
After boot autostart Launcher service added
After installation, open the app once, then Launcher service will start automatically after every boot.
Version 2.3
- Fix few crashes that sometimes occurred when launching the app from Launcher area
- Deactivate Launcher service temporarily on PaceOn screen
- Change the UI a bit
- Improve swipe detection
- Make the services harder to kill
- Use a bit less RAM to run
Version 3.0
GUI changed
- Battery level percentage added to the OK button
Lock screen added
The idea here is to have a transparent lock screen to protect the screen on from touches or taps. When this lock screen is on, the watch is still fully awake.
- To activate the lock screen, swipe right on Launcher area.
- To unlock, just double tap anywhere on the lock screen.
Return Home option added
This is a workaround to the notification issue (raised by a few people). When receiving a new notification, the notification screen won't automatically be dismissed and another notification won't trigger a vibration. This can only be turned on, when both PaceOn & Launcher services are selected.
When this option is selected, it will have an effect only when the lock screen is on. After activating the lock screen, the watch will return to the home screen (from any screen) in every 30 seconds.
Bear in mind "this is supposed to consume more battery power."
Version 3.4
GUI changed
PaceOn now has many options, but I still want to have only one single screen, without scrolling. So, buttons are used to maximise the space. A button represents a service, while a checkbox represents an option in a service. The bottom part of the screen also has a new design.
Auto On When Charging option added (off by default)
When turned on, PaceOn service is automatically activated when the watch is plugged into a power source, and deactivated when unplugging it. This option always keeps the screen fully on (not dim) to get rid of the system charging animation.
How about a Pace as a desk clock
Version 4.0
Quick Switch panel added
- Swipe roughly 45 degrees upward to the right from Launcher area to bring up Quick Switch panel which contains:
1) Brightness Seekbar
Quickly set the screen brightness to any value from 0 to 255 or to Auto Mode.
2) Bluetooth switch
Now, the bluetooth can be turned on/off at will.
3) WiFi switch
Yes, the wifi too can be turned on/off at will.
- To dismiss Quick Switch panel, just tap on the brightness number or swipe the panel away to the right.
These switches work independently of the system settings. They can even turn on when Airplane mode is on.
How about a quick glance to check if your bluetooth/wifi is on (just like your phone Status bar)
Version 4.6
GUI Changed
The "Auto On When Charging" button becomes "Auto On..." button to allow a new button added to this tiny single screen.
CXN svc. option added
CXN svc. = Connection service
The Connection service improves the bluetooth/wifi connection visibility. It lets us know when bluetooth/wifi is connected/disconnected with a toast message and vibration (only vibration, when screen off). It also tells us what device/AP the watch is connected to/disconnected from.
The option is on by default and also automatically on after every boot.
Now, we always know what the bluetooth/wifi on our watch is up to
Version 5.0
Keep the screen dimmed while PaceOn's lock screen is on.
With Dim option selected, when the PaceOn's lock screen is on, the screen will be kept dimmed until unlocked (no matter if the screen is touched or tapped.)
PaceOn service auto-disable option added
When turning on PaceOn service, an off schedule can be selected to automatically turn off the service. The default is to turn it on forever.
Version 5.4
Settings now saved to the storage
All settings are saved to the storage before closing so that when the app opens the next time, all settings will be restored. This is so even after booting.
Auto-start after boot service changed
Launcher and CXN services each will automatically turn on after booting, if they were previously on before the boot.
Better handling of app closing
When the app is closed by clicking the OK button or pressing the Power button or swiping the app UI to the right, all settings are applied and saved to the storage.
Workaround to the issue of app UI appearing briefly when a notification arrives while charging
This issue can happen to any 3rd party app. It's kind of annoying to see. So, this version tries to avoid that.
If you like my work & want to buy me a cup of coffee or beer, I've just added a Paypal donation email to my profile.
Nice one, thanks.
I'll give it a try.
I'm with you one the wifi transfer thing.
Could really see this come handy
Sent from my MI 6 using Tapatalk
from what i saw till now, if I enable the "keep on the screen", the vibration is gone. the watch vibrates ONLY if I lock it via the button.
1immortal said:
from what i saw till now, if I enable the "keep on the screen", the vibration is gone. the watch vibrates ONLY if I lock it via the button.
Click to expand...
Click to collapse
Thank you for your feedback.
I've been testing the app for a few days without any vibration issues. When the screen is kept on by the app, my usual apps such as Walk, Run, Alarm, Timer and notifications from phone vibrate normally.
Could you please explain a bit more on the vibration issue you have? Some specific app doesn't vibrate? Thanks.
i'm running a zuk z2 with Nougat on it, 7.1.2, and lost vibration with Gmail, whatsapp and facebook messenger applications.
update: noticed that there's no vibration on Tapatalk as well.
1immortal said:
i'm running a zuk z2 with Nougat on it, 7.1.2, and lost vibration with Gmail, whatsapp and facebook messenger applications.
update: noticed that there's no vibration on Tapatalk as well.
Click to expand...
Click to collapse
OK, I think I know what happens here.
With or without this app,
When a notification (from any app) is received, Amazfit Pace vibrates only in one of these cases:
1) the screen is locked OR
2) you are NOT on the notification screen.
So, while the screen is kept on (but unlocked) by the app, the device vibrates if you are NOT on the notification screen.
Say you're on the home screen (watchface). Then, a notification is received, the device will vibrate and show the notification. Now, you're on the notification screen, and you won't be taken back to the home screen as there is no screen timeout. If you don't manually navigate from the notification screen to another screen, another notification will not trigger a vibration.
I hope my explanation makes sense, and I don't think I can do anything with the app to improve this.
got it!
What did you use for the app to keep the whatch on?
I started with a GolfCaddy app and because the watch sleeps after a few seconds I don't get the gps satellites.
Thank a lot
wow! it's useful for me Thank you very much for your creation. :laugh::laugh:
fzelle said:
What did you use for the app to keep the whatch on?
I started with a GolfCaddy app and because the watch sleeps after a few seconds I don't get the gps satellites.
Click to expand...
Click to collapse
You mean you're developing the GolfCaddy app, right?
Check this out https://developer.android.com/refer...Manager.LayoutParams.html#FLAG_KEEP_SCREEN_ON
starship1000 said:
wow! it's useful for me Thank you very much for your creation. :laugh::laugh:
Click to expand...
Click to collapse
I'm glad you like it.
BTW, a new improved and optimised version is coming this weekend.
A big thank you ! As a paramedic it will be very useful to check pulse (seconds), some suggestions to preserve battery :
- Implement an "HD Mode"/On motion as in the new watchface (unlock the screen/activate on wrist motion / background light on maybe ?)
- add an on/off widget on the launcher ? (Don't know if huami allows it) ?
- Lock the screen (unlock with a double tap) ?
Thanks again ! Really great addition to the watch !
WiwiPouPou said:
A big thank you ! As a paramedic it will be very useful to check pulse (seconds), some suggestions to preserve battery :
- Implement an "HD Mode"/On motion as in the new watchface (unlock the screen/activate on wrist motion / background light on maybe ?)
Click to expand...
Click to collapse
Sorry, I don't get this one. Care to explain a bit more?
- add an on/off widget on the launcher ? (Don't know if huami allows it) ?
Click to expand...
Click to collapse
I'm also looking for an easy way to enable/disable the app, but I'm pretty new to this watch.
- Lock the screen (unlock with a double tap) ?
Click to expand...
Click to collapse
We're talking about a custom lockscreen on a custom version of Android here. Sounds quite complicated, but it's actually on my wish-to-do list when time allows.
anox said:
You mean you're developing the GolfCaddy app, right?
Check this out https://developer.android.com/refer...Manager.LayoutParams.html#FLAG_KEEP_SCREEN_ON
Click to expand...
Click to collapse
Yes, the only thing missing is a Golfcaddy ( for me ).
Thanks, missed that .
Edit:
Jupp, working like a charm.
Now to the businesslogic and prettying up the beast.
You plan to release source code?
anox said:
Sorry, I don't get this one. Care to explain a bit more?
Click to expand...
Click to collapse
I was talking about to behaviour of "Night Run" watchface (in pacefied and in 1.3.4f) : when locked, a wrist motion (motion when you watch the...watch) trigger the full color / resolution / seconds hand version of the watchface
With your app you could be able to implement that behaviour for every watchface ! An it will be very good for battery life (don't you want full version of a watchface when you see it ? not when you're watching anything else ?)
If we had tasker on mips, that's what I would try : (I'm not a developer unfortunately)
- Detect wrist motion -> autounlock the watch for a programmed time -> relock
Or
- detect "backlight on" or backlight level > 0 (triggered by motion wrist if enabled in settings) -> autounlock the watch for a programmed time -> relock
As a last suggestion, a simple configurable timer in seconds could be great (my case : every time I unlock I would like to see the seconds hand / NUM for a minute, time for me to check manually a heart rate / ventilatory rate of my patient then autolock), a sort of programmable autorelock !
For the lockscreen, can't you place an invisible overlay after returning on the watchface which could intercept touch, then capture only double tap as an event to disable that overlay ?
Again, Very useful, big thank ! Keep up !
dpeddi said:
You plan to release source code?
Click to expand...
Click to collapse
Not at the moment, might reconsider it in the future.
WiwiPouPou said:
I was talking about to behaviour of "Night Run" watchface (in pacefied and in 1.3.4f) : when locked, a wrist motion (motion when you watch the...watch) trigger the full color / resolution / seconds hand version of the watchface
Click to expand...
Click to collapse
I'm on 1.3.4f, there is Activate on Wrist option. When on, it just turns on the backlight for a few seconds, but doesn't wake the watch. So, you won't see the second hand. And, that works the same for all watchfaces.
With your app you could be able to implement that behaviour for every watchface ! An it will be very good for battery life (don't you want full version of a watchface when you see it ? not when you're watching anything else ?)
Click to expand...
Click to collapse
I do see the importance of the watchface for you, but PaceOn is implemented to work universally with any app. What you can do now with PaceOn v1.0 is this:
- Open the app, activate "Screen On"
- Press Home (power) button to go Home,then press again to put the watch to sleep
- Whenever you need to take a heart rate reading, just wake the watch, After done, just put the watch back to sleep
I don't think the app consumes that much battery when the watch is asleep, though I've not actually measured it.
If we had tasker on mips, that's what I would try : (I'm not a developer unfortunately)
- Detect wrist motion -> autounlock the watch for a programmed time -> relock
Or
- detect "backlight on" or backlight level > 0 (triggered by motion wrist if enabled in settings) -> autounlock the watch for a programmed time -> relock
Click to expand...
Click to collapse
Yeah, my wish too.
Another thing is I have no idea what the system allows 3rd party apps do when the watch is asleep.
As a last suggestion, a simple configurable timer in seconds could be great (my case : every time I unlock I would like to see the seconds hand / NUM for a minute, time for me to check manually a heart rate / ventilatory rate of my patient then autolock), a sort of programmable autorelock !
Click to expand...
Click to collapse
This one is already on my wish-to-do list.
For the lockscreen, can't you place an invisible overlay after returning on the watchface which could intercept touch, then capture only double tap as an event to disable that overlay ?
Click to expand...
Click to collapse
That'd be the idea, but like I mentioned this is a custom android on which I see some simple android functions don't even work. What I'm doing here is mostly guesswork, just trial & error.
Thanks for the comments. We'll see how this goes.
V1.5 is up.
Version 1.5 is up (OP updated)
Changelog:
UI changes
- Theme change
- Some wording changes (hopefully clearer)
- New icon
Toast notifications added
- Confirmed messages when starting/stopping the PaceOn service
Internal Improvement
- Better app instance handling
- More persistent, less likely to be killed by system
- Lower resource usage
- Optimised and smaller apk
Please note that APK installer doesn't seem to support this optimised apk (attached to OP), though it can be installed via adb as usual. In case that you already have PaceOn on your watch, the command will be "adb install -r anox.PaceOn.v1.5.apk"
The next version will include some new functionality.
thanks for this app....i really like it since it make easier to check anything without double tap or unlock via button.
anyway i find some issues :
the activate on wrist are not working if PaceOn are active
notification wont "minimize" if PaceOn are active
Baterry drain (but this is acceptable i think since the watch are always "on" without baterry saving mode.
if you could fix it would really great ( if not it's still great app )
but overall are superB app, really appreciate it.
information :
Im using English rom 1.3.4f
cheers
hoomansjogja said:
the activate on wrist are not working if PaceOn are active
Click to expand...
Click to collapse
The system's activate on wrist works only when the watch is asleep. When PaceOn is active, the watch is awake. I may look into this when implementing a lockscreen for PaceOn.
notification wont "minimize" if PaceOn are active
Click to expand...
Click to collapse
Right. It's the same reason. When PaceOn is active, the watch stays awake. So, the notification screen will stay on after receiving the notification. It has been discussed in post#6 . Once PaceOn has its own lockscreen, I'll try to improve this.
Baterry drain (but this is acceptable i think since the watch are always "on" without baterry saving mode.
Click to expand...
Click to collapse
PaceOn itself doesn't drain the battery (much), it's the screen on and the running apps while the watch is awake. When the watch is asleep, I find the battery consumed by PaceOn negligible. Everyone else who has measured the battery consumption may share their experience.
Thanks for the comments & stay tuned for the future versions.
BTW, another version is coming up tomorrow.
So I thought I would start a thread since this seems to be the best app out there to replace our missing notifications LED. This seems to be the best solution at the moment but I'm having some issues.
1. I can't seem to get the colors to change on a per-app basis.
2. The edge lighting around the notch doesn't seem to work.
Has anyone else figured this out or have any other suggestions?
Here is a link to the app for those that haven't tried it yet.
https://play.google.com/store/apps/details?id=com.used.aoe
In settings for the app, give it the required permissions, scroll down to the blue box that says "enable app and its color and time", select the app you want, check enable edge lighting, (I have only checked out One Color) then tap the colored box, and select the color you want, and press Choose.
Been playing with it today. Works well enough that I paid. One remaining concern, is effect on battery so we'll have to see how it behaves tomorrow.
For the ring around the camera, enable "notch support" under widget settings and make sure you have either "around all screen" or "around notch only" selected under lighting above.
To get per app notifications, use the "when a notification comes" option under how to start and it will open up a selection.
Another really cool feature is "display notification icons" that can be used together work edge lighting, or stand alone by itself to create an alternative to aod that stays on when there are notifications pending.
dew.man said:
Been playing with it today. Works well enough that I paid. One remaining concern, is effect on battery so we'll have to see how it behaves tomorrow.
For the ring around the camera, enable "notch support" under widget settings and make sure you have either "around all screen" or "around notch only" selected under lighting above.
To get per app notifications, use the "when a notification comes" option under how to start and it will open up a selection.
Another really cool feature is "display notification icons" that can be used together work edge lighting, or stand alone by itself to create an alternative to aod that stays on when there are notifications pending.
Click to expand...
Click to collapse
For "when a notification comes", no option to choose for Whatsapp or Gmail?
micshang said:
For "when a notification comes", no option to choose for Whatsapp or Gmail?
Click to expand...
Click to collapse
Try the system apps checkbox. The UI isn't the greatest and it took me a while to get mine sorted out, but seems to work really well one configured.
dew.man said:
Try the system apps checkbox. The UI isn't the greatest and it took me a while to get mine sorted out, but seems to work really well one configured.
Click to expand...
Click to collapse
System apps checkbox in the AOE? Didn't see this option. If on the individual app, I've set all notifications to on
I've been playing with the notch ring only cause is what I am interested but it somehow disable Always Display and dont know how to get it back... I just want the led notch ring notifications
Is it me or does this app have an archaic setup process? It just looks so dated and hard to use.
dew.man said:
Try the system apps checkbox. The UI isn't the greatest and it took me a while to get mine sorted out, but seems to work really well one configured.
Click to expand...
Click to collapse
Found that. Thank you.
Which option do you choose for the following;
*allow this app to run without restriction or
*allow the system to prevent this app from running sometimes
I am curious....it cannot be setup to work as the original led notifications, right? I mean, the light ring disappears after a few seconds...cannot be set to repeat after a certain period of time..?
Yeah, it has a reminder function. Thanks for clarifying to myself )
Curious about battery usage with this app. The features are cool but the setup is just a pain.
leoking3 said:
I am curious....it cannot be setup to work as the original led notifications, right? I mean, the light ring disappears after a few seconds...cannot be set to repeat after a certain period of time..?
Click to expand...
Click to collapse
You can set the time that it shows up and also there is a repeat option as well.
Hi. Great app!! However... Even tho I've ticket to show the app's icon when a notification is received... I don't. Any ideas? Cheers
I can't get this to work at all on my s10. wanted to it flash different colours (with screen off) for variety of notifications (Skype, WA, Nine (email). Messenger). None work. can't get any light to come on at all....is there something I'm missing!?
Make sure that the built in edge lighting isn't turned on.
johnboywilson said:
Make sure that the built in edge lighting isn't turned on.
Click to expand...
Click to collapse
Thanks - all good. Seemed that Nine was supported as Samsung email works fine as does Whats App. To me this is a 100% solution to the no LED light so happy days..
Yes I'm very happy with it so far. :good:
Im still tweaking with this - can't seem to figure out how to get rid of the AOD it puts on the phone. I just want the notification ring.
I cant seem to get this to work as well
Hi guys,
I cooked up some tasker mods to address some of the graciously few problems I have with the software of the mate 20x. I thought they might be useful to some of you guys so I figured I'd share. The plugins used are AutoInput, AutoLaunch, AutoNotifications, and AutoTools.
Mod List:
1. Fixed Auto-rotate Lock: uses the quick tile to auto-rotate or lock to any orientation
2. Swipe Recent Apps Switcher: cycle through previous apps by swiping on the bottom of the screen ala iPhone
3. Auto-disable Eye comfort: pop-up prompt when activating chosen apps that automatically disables eye comfort mode
4. Automatic Screen Filter: activates the free app Night Screen when brightness is set to minimum and disables it when brightness is raised
1. Fix Auto-rotate Lock
There are two versions of this mod, one which uses the system quick tile and one which uses an AutoNotifications quick tile. The AutoNotifications quick tile is more reliable and allows you to seamlessly lock orientation in landscape or inverted. The system quick tile is more clunky and you cannot lock in inverted, but it's a bit faster. If anyone knows where to find the system quick tile icons please tell!
Simply import the profiles to Tasker and turn them on. Choose "Rotate On" for the system qt or "AltRotate On" for the AutoNotifications qt.
2. Swipe Recent Apps Switcher
This mod will track all activated apps in an array so they can be systematically called back. It also offers swipe gestures at the bottom of the screen which can be used to cycle through them. Swipe left or right to go back and forth through your recent apps. After settling on an app, the app list will be updated to bring your active app to the front.
To install, import and turn on all profiles and run the swipe task. The Swipe task must be ran to provide gestures. The overlay providing gestures is at the very bottom of the screen, so just swipe your finger along the screen edge. Modify your settings and profiles to make sure that Swipe, AutoTools, and Tasker stay on with full permissions. This mod requires that tasker monitoring use accessibility. In the no root version some apps will refresh their state when activated (es explorer). This is because apps are 'launched' and not 'brought to foreground'. In the root version this is not an issue.
3. Auto-disable Eye comfort
This will provide a discrete pop-up in the corner of your screen when you activate the selected apps. I set up the profile with the apps I use for photo and video editing. When you click the pop up it will automatically open the drawer and disable the eye comfort quick tile. The pop up will go away in 5 seconds if not clicked, or can be swiped away.
To install, place the "bubble" folder in your AutoTools webscreen folder. The file paths should match up, but you may need to modify them. Import and turn on. The no root plugin uses AutoInput to press the fourth quick tile. If you have eye comfort on another quick tile you will need to change the touch coordinates. The root option will, if prompted, automatically switch eye comfort on and off as you switch between monitored apps. If you dismiss the prompt it will not ask again until eye comfort is toggled.
4. Automatic Screen Filter
When brightness is lowered to the minimum level, this mod will launch the app Night Screen to lower the brightness with a screen filter. When the brightness is raised above minimum it will turn night screen off.
You can change the app used, but it must have a toggle or on/off activity to be launched by secure settings. I found Night Screen to be the best for me. Import and turn on profiles.
There may be some bugs due to inconsistent Tasker monitoring and the system messing with things. Unfortunately there is little I can do about this.
ps. the zip is NOT installable
Sorry I'm stumped about how to embed youtube videos. Here's links.
https://youtu.be/KZBQJX3Fges
https://youtu.be/AnVLVCdWC8U
https://youtu.be/SsVjmW-9KwI
I vastly improved the app switcher to function much more intuitively and more like a native function. It's works pretty much exactly like on the iPhone, accept the animations are going the wrong way. I'll test it out a bit then update the post.
You sir are incredible
Post has been updated with a new app switcher, a root app switcher which fixes the launching problem, and a root eye comfort prompt which modifies the setting directly and has enhanced functionality. Also now none of the mods are dependent on the Secure Settings plugin
cobram3 said:
You sir are incredible
Click to expand...
Click to collapse
glad somebody likes it :good:
Allan can I pay you to help/tutor me on creating Tasker apps for my own use?
Please message me
---------- Post added at 02:14 AM ---------- Previous post was at 02:13 AM ----------
AllanRSS said:
glad somebody likes it :good:
Click to expand...
Click to collapse
Such as:
Auto speakerphone when call connects by default
When I get in the car, show a list of media players as a popup (bc bt connected)
$60 via PayPal thx
I really appreciate the offer, but thats not how xda works. This is where people help people, and I've benefited far too much through the days on the generosity of others to be greedy now.
I took a quick look and it and there is a State profile called "BT Connected". You should be able to check your bluetooth settings for the exact name of your car and insert that into the Name field. Then you would make a Scene containing buttons corrosponding to your desired media player. This should be reletively straightforward. When the BT is connected, show the scene with the buttons then launch your choice. This can be done with the AutoLaunch plugin or by android intent by running code 'am start --activity-reorder-to-front PACKAGE_NAME/MAIN_ACTIVITY'. The main activity intent is easily found through terminal if you're rooted but I dont remember how to find it if you're not rooted.
For the call I would use the State profile "Call". I am not sure if this will activate after the call is connected or while the phone is ringing for incoming calls. If its when the phone is ringing I would then set up a loop with "AutoInput Query" to check whether the call was connected. Run a couple tests with the query to see what the variable values are when the call is connected and check for those values to escape the loop. When the call is connected, use auto input to click on the speakerphone button automaticly. You can use the auto option to configure this or you can go into developer mode on your phone and enable show pointer location to get the coordinates. Coordinates are faster that text matching, but you might have to add a wait for 500ms to avoid it touching too early.
That should be it, pretty straightforward. You've inspired me to update this list with my new rotate toolbar and fixes. Happy tinkering!
That being said, I would be willing to do it for you if you would rather pay for a finished solution. However, I greatly encourage you to give it a go yourself, the possibilities are endless once you get comfortable with Tasker.
Hi guys,
These apps i am about to introduce will change your phone experience for the better not just our phone for that matter but any Android phone.
1. Immersive Mode Manager (Paid)
This app is a must for every Amoled screen to protect your phone from future screen burn, the other thing is you get to enjoy the full screen experience with every app on your phone. I install this app on all of my Android devices.
I have created a thread long ago doing it manually but i think it's too much of work for people who want an app for that, if you want a manual free alternative check it out.
2. Glimpse Notifications ( Free)
So on the ROG 2 phone only a couple of apps does wake the device when you receive a notification mostly chatting apps and I guess not all of them. This is where Glimpse Notifications solves the problem that is if you just want the screen to simply light up.
3. Blokada (Free)
You must have an Ad blocker on the list if you are unrooted and definitely one of the best open source and free app out there is this one.
4. Fluid Navigation Gestures (Free/Pro Features)
I will dare to say IMPO that it's the best custom gesture navigation app on Android currently. Also it's way better than the default gesture navigation because of the extra features.
5. Tiles (Paid)
Although it's a paid app it's worth its price. The beauty of having it you get options of having tiles of any application you need including the power button which I use mainly for that purpose, instead of clicking and wearing the power button.
6. Edge Gestures (Paid)
This is by one of my favorite developers in the play store, he has some other apps in the play store you should check them out. Now why I recommend this app because with this app you can add extra features to the default system gesture navigation which completes it.
I stopped using FNG because in certain apps it doesn't play well and sometimes it stops. So using this app you can add whatever shortcuts, apps using one swipe from whichever side of the screen you like especially the top part of the side where back swipe doesn't work anyway which makes the default gesture navigation complete.
7. Zone Launcher (Free/Paid)
Launch any app from any screen with one swipe, this is a new favorite.
-------
Edit:
I have removed "Light Flow" from the list due to it not working properly with our device. When you try to customize the led notifications for third party apps and then testing the modifications within the app itself everything seems be okey. But it turns out non of the modifications apply or stick. Anyway for now there isn't any third party app that can customize the led notifications for our device!
I will keep updating this thread once other apps are discovered or suggested.
-------
Thanks for the suggestions! Definitely these apps seem useful and apart from Fluid Nav Gestures and Light Flow, rest are new to me.
Also a small correction, link to Fluid Nav Gestures is wrong(tiles link attached to Fluid Nav Gestures text).
iShubham said:
Thanks for the suggestions! Definitely these apps seem useful and apart from Fluid Nav Gestures and Light Flow, rest are new to me.
Also a small correction, link to Fluid Nav Gestures is wrong(tiles link attached to Fluid Nav Gestures text).
Click to expand...
Click to collapse
Thanks, corrected!
I'll add Nova Launcher Pro (Paid)
and
https://play.google.com/store/apps/details?id=com.dustinb.icons.cobalt&hl=en_US
Cobalt icon pack
Rashad83 said:
Hi guys,
These apps i am about to introduce will change your phone experience for the better not just our phone for that matter but any Android phone.
1. Immersive Mode Manager (Paid)
This app is a must for every Amoled screen to protect your phone from future screen burn, the other thing is you get to enjoy the full screen experience with every app on your phone. I install this app on all of my Android devices.
I have created a thread long ago doing it manually but i think it's too much of work for people who want an app for that, if you want a manual free alternative check it out.
2. Glimpse Notifications ( Free)
So on the ROG 2 phone only a couple of apps does wake the device when you receive a notification mostly chatting apps and I guess not all of them. This is where Glimpse Notifications solves the problem that is if you just want the screen to simply light up.
3. Blokada (Free)
You must have an Ad blocker on the list if you are unrooted and definitely one of the best open source and free app out there is this one.
4. Fluid Navigation Gestures (Free/Pro Features)
I will dare to say IMPO that it's the best custom gesture navigation app on Android currently. Also it's way better than the default gesture navigation because of the extra features.
5. Tiles (Paid)
Although it's a paid app it's worth its price. The beauty of having it you get options of having tiles of any application you need including the power button which I use mainly for that purpose, instead of clicking and wearing the power button.
6. Light Flow Legacy (Free)
This app is a must have if you want to customize the led notification light for each app, currently i believe only 3 colors are available for our device (Red, Yellow, Green) so you can set any colors of those to any app you want.
-------
I will keep updating this thread once other apps are discovered or suggested.
-------
Click to expand...
Click to collapse
Hi, thanks for these. I really like FNG. However, I'm having an issue with Immersive Mode. All the input boxes that are normally above the keyboard (e.g. try to change the name of your phone) are hidden because they are now under the keyboard.
Any idea how to fix this?
Annie the Eagle said:
Hi, thanks for these. I really like FNG. How can I disable the standard action bar because currently, when I do the recents, it is simulating a double tap because I think both System UI and FNG are doing it
Click to expand...
Click to collapse
Make sure that the system navigation is set to virtual key navigation instead of gesture. Now if you have the pro version of FNG you can disable the navigation bar from the app settings. So either buy the pro version of FNG and disable the navigation bar from there or use another app to disable the navigation bar which you can find some apps do that in the play store.
I couldn't get light flow to work. What settings have u tested it with to get it working?
stealthj said:
I couldn't get light flow to work. What settings have u tested it with to get it working?
Click to expand...
Click to collapse
Make sure it's not killed by mobile manager. Also disable battery optimization for it. Personally I mainly use a different color for two apps sms and calls. I use red color for calls and yellow for sms.
Rashad83 said:
Make sure it's not killed by mobile manager. Also disable battery optimization for it. Personally I mainly use a different color for two apps sms and calls. I use red color for calls and yellow for sms.
Click to expand...
Click to collapse
Did both of those but still nothing. When I go to test and turn screen off, nothing happens.
stealthj said:
Did both of those but still nothing. When I go to test and turn screen off, nothing happens.
Click to expand...
Click to collapse
On my side when I do a test it works fine. But I can't confirm if it's working all the time because I can't recall the last time I noticed the notification light of my custom notifications.
Try to reinstall the app and play with settings.
Rashad83 said:
On my side when I do a test it works fine. But I can't confirm if it's working all the time because I can't recall the last time I noticed the notification light of my custom notifications.
Try to reinstall the app and play with settings.
Click to expand...
Click to collapse
I tried everything. I also have the pro version of led blinker, and that doesn't work either.
But who knows. Maybe a few restarts will help
Rashad83 said:
On my side when I do a test it works fine. But I can't confirm if it's working all the time because I can't recall the last time I noticed the notification light of my custom notifications.
Try to reinstall the app and play with settings.
Click to expand...
Click to collapse
I tried Light Flow Legacy, and it seems to work, except for cyan, blue and light blue color. If i put light blue, the led is Yellow. If i put cyan, the led is green. What's wrong?...
NajimKiSaad said:
I tried Light Flow Legacy, and it seems to work, except for cyan, blue and light blue color. If i put light blue, the led is Yellow. If i put cyan, the led is green. What's wrong?...
Click to expand...
Click to collapse
You can only customize 3 colors: yellow, green, red.
NajimKiSaad said:
I tried Light Flow Legacy, and it seems to work, except for cyan, blue and light blue color. If i put light blue, the led is Yellow. If i put cyan, the led is green. What's wrong?...
Click to expand...
Click to collapse
At least U got it to work. I installed light flow legacy and did the test.. still absolutely nothing.
Rashad83 said:
On my side when I do a test it works fine. But I can't confirm if it's working all the time because I can't recall the last time I noticed the notification light of my custom notifications.
Try to reinstall the app and play with settings.
Click to expand...
Click to collapse
I only see the notification light when the phone is off and is charging
I use the APP dimly. It helps lower the minimum brightness on the phone so you won't get blinded using it in a dark room.
I just updated my phone to 1908.21 WW and now ther LED notification is back and working again!
Rashad83 said:
Hi guys,
These apps i am about to introduce will change your phone experience for the better not just our phone for that matter but any Android phone.
1. Immersive Mode Manager (Paid)
This app is a must for every Amoled screen to protect your phone from future screen burn, the other thing is you get to enjoy the full screen experience with every app on your phone. I install this app on all of my Android devices.
I have created a thread long ago doing it manually but i think it's too much of work for people who want an app for that, if you want a manual free alternative check it out.
2. Glimpse Notifications ( Free)
So on the ROG 2 phone only a couple of apps does wake the device when you receive a notification mostly chatting apps and I guess not all of them. This is where Glimpse Notifications solves the problem that is if you just want the screen to simply light up.
3. Blokada (Free)
You must have an Ad blocker on the list if you are unrooted and definitely one of the best open source and free app out there is this one.
4. Fluid Navigation Gestures (Free/Pro Features)
I will dare to say IMPO that it's the best custom gesture navigation app on Android currently. Also it's way better than the default gesture navigation because of the extra features.
5. Tiles (Paid)
Although it's a paid app it's worth its price. The beauty of having it you get options of having tiles of any application you need including the power button which I use mainly for that purpose, instead of clicking and wearing the power button.
6. Light Flow Legacy (Free)
This app is a must have if you want to customize the led notification light for each app, currently i believe only 3 colors are available for our device (Red, Yellow, Green) so you can set any colors of those to any app you want.
7. Edge Gestures (Paid)
This is by one of my favorite developers in the play store, he has some other apps in the play store you should check them out. Now why I recommend this app because with this app you can add extra features to the default system gesture navigation which completes it.
I stopped using FNG because in certain apps it doesn't play well and sometimes it stops. So using this app you can add whatever shortcuts, apps using one swipe from whichever side of the screen you like especially the top part of the side where back swipe doesn't work anyway which makes the default gesture navigation complete.
-------
I will keep updating this thread once other apps are discovered or suggested.
-------
Click to expand...
Click to collapse
I have tried both Fluid Navigation Gestures and Edge Gestures, both pro/paid version, and the system will sooner or later make them stop working, and have to enable them again, having to give them permission to draw over other apps from time to time and it is a bit annoying. did you or someone manage to make it work perfectly? any tips on what might I be doing wrong? thanks
I don't think Tiles app works as it says it's only for Naugut and Oreo. I have paid for it and now it's not working. I don't know why did you say that it works with our phone. You should not give wrong info to others without checking.
Sent from my ASUS_I001DE using Tapatalk
Sedariya11 said:
I don't think Tiles app works as it says it's only for Naugut and Oreo. I have paid for it and now it's not working. I don't know why did you say that it works with our phone. You should not give wrong info to others without checking.
Click to expand...
Click to collapse
If you don't know how to use it that's is your problem, I have it right now on my device working. Add to that I haven't recommended any app on this thread without testing. Choose your words carefully!
One more thing, if you don't have anything positive to say just move on and let me be, you don't have to visit this thread or take my word for that matter!