help - Android Q&A, Help & Troubleshooting

Hello i have what appears to be a soft bricked samsung galaxy grand prime after i rooted it. It boots up and goes past the samsung logo but stops/freeze at the carries logo ( metro pcs ) I can get IT into download mode but when i try to plug it into the PC via USB it just doesnt recognize it. It says ' USB DEVICE NOT RECOGNIZED' I tried instaling the drivers and all but nothing seems to do the trick. UNKNOWN USB DEVICE ( DEVICE DESCRIPTOR REQUEST FAILED) is all i get. My only problem here is getting the phone to plug into the pc. The rest ( restore to stock rom with odin) i can do. PLEASE HELP ANYONE

Related

corrupted usb and my phone is logo loop can't enter recovery too HELP!!!

HI
i have a very big problem
After I setup cm12 ROM
i had no root access
Whatever I tried, but I couldn't find anything
Then I rebooted my device
And the device can't access recovery
And can't start up just the galaxy s3 logo over and over
The problem that my USB input is corrupted for 7 months now!!!
So is there any way that i can reset my device even a hard way or something
As computer Odin won't work as I can't connect my device to my PC
PLEASE I NEED HELP FROM PROS

LG G2 Mini Brick on download mode Help please

Hi my phone was bricked when i install new firmware przez lg mobile support tool Through emergency software recovery
when i try turn on phone The download mode is started Without anything without a cable I do not know what it is caused by the computer sees the phone but when i plug phone to pc in manager device i see this Unknown usb device usb descriptor request failed
and i click this and write ,,No device has been migrated" And from time to time the computer sees the phone but does not recognize it
Please help me pleasełacz:łacz:

I Can not flash my Samsung galaxy Ace Duos SCH-i589 . How to get out of it?

I have a Samsung Galaxy Ace Duos SCH-I589(cdma+gsm) model. I recently rooted it with kingoroot and now it got stuck in bootloop, i can't go to recovery mode it shows Samsung logo. I tried to flash it with odin but when i connect it to my computer it shows windows can't recognise this device. I have already installed samsung usb drivers but they are useless as my computer shows the same message. I also tried samsung kies 3 software but it also can't recognise my phone. Please help me to get out of it. :crying:
(Sorry for bad English).:cyclops:
grawish said:
I have a Samsung Galaxy Ace Duos SCH-I589(cdma+gsm) model. I recently rooted it with kingoroot and now it got stuck in bootloop, i can't go to recovery mode it shows Samsung logo. I tried to flash it with odin but when i connect it to my computer it shows windows can't recognise this device. I have already installed samsung usb drivers but they are useless as my computer shows the same message. I also tried samsung kies 3 software but it also can't recognise my phone. Please help me to get out of it. :crying:
(Sorry for bad English).:cyclops:
Click to expand...
Click to collapse
I Got the solution. I installed windows xp(32-bit) on my pc via dual boot and i connected my phone it started recognizing my phone. then i installed the samsung drivers and HOLA !!! it detected my phone as odin. I started odin and it showed com3 added!!..

Bricked Vivo Y55L dosent connect to QFIL

My vivo Y55L was stuck in a boot loop and did not go ahead of the vivo screen.
I tried flashing the stock ROM through QFIL but it gave me a EDL Firehouse error and the flash was unsuccessful. I disconnected the phone to reconnect but to my misery the phone does not connect to QFIL anymore. When i press the power up and down button and connect the USB the computer gave me an error USB device not recognised and may have malfunctioned. if I power up the phone now it doesn't start and goes back into the bootloop for 2-3 times before switching off. I have tried reconnecting the USB and reinstalling ADB drivers and Qualcomm drivers. But still the same error, Device receptor not recognized and USB device not recognized may have malfunctioned. Any solutions will be appreciated

Need help with a truly bricked GT-I9100

Hi everyone,
I have an SII GT- I9100 that I installed a custom ROM on a while back (probably 2 years ago). After a while it got badly bricked I don't remember what happened, and not only that
the charging port was also messed up so I couldn't connect it to my pc (pc wouldn't recognize it unless I held the cable in with force, but even that didn't work after some time).
It's been sitting on a shelf for about a year and I decided to buy a new charging port, replace it, unbrick it and give it to my mom.
I did replace it and I can connect it to my pc now but there's still issues. On my main windows 10 pc it gives me an error "USB device not recognized, the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". (I've reinstalled usb drivers and troubleshooted with Kies).
I keep the phone in download mode while I am trying to connect it to my pc since I can't boot into anything (I have a yellow triangle and Samsung logo if I don't go into download mode).
On my laptop (win 7) I've managed to get windows to install all the drivers(even though it failed a couple times ?), I've also troubleshooted with Kies, still Kies can't connect to it.
I want to restore it to stock ROM but I haven't been successful.
I've tried many different Odin versions, nothing.
I've been trying a stock ROM for the country and network I think it was on(I don't know it for sure, could this be an issue ?), and a set of CSC, MODEM and CODE XXLSJ files.
In all the Odin versions I've tried it gets stuck on NAND write start !! what's going on here?
Is it beyond repair?
btw. I can't get into recovery mode just DL mode.
Thanks in advance!

Categories

Resources