Hi
Here is a XT1527 at&t device flashed by the wrong file:
XT1527_SURNIA_RETCA_6.0_MPI24.65-39_cid14_subsidy-DEFAULT_CFC.xml
It was stuck in fastboot mode and I flashed it with this file
XT1527_SURNIA_ATT_5.1_LPIS23.29-18.9-2_cid1_subsidy-ATT_CFC.xml
also
XT1527_SURNIA_ATT_5.1_LPIS23.29-18.9-6_cid1_subsidy-ATT_CFC.xml
everything seemed ok and no errors during flashing but after flashing there is just blank screen.no boot up no recovery no ..
just fastboot is working .
Any help would be appreciated
How on earth did you even manage to flash this device? If it's the at&T model, Motorola claims that AT&T signs the bootloader and it's not unlockable.
https://forums.lenovo.com/t5/forums/v3_1/forumtopicpage/board-id/230/thread-id/2654/page/1
Related
Hi! I just bought a Honor 9 STF-AL00, build: STF-AL00C00B201.
As it is the chinese version, I wanted to rebrand it, so I follow the instructions on https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719.
Unlocking bootloader was successful and as chinese firmware, it did not had a FRP lock.
The first time, rebranding stopped just before the menu.
The second time, I could access the menu and did the install.
But it looks like it did not go as expected because when the phone booted, it did not load TWRP but eRecovery.
So I booted in fastboot, it says phone locked & FRP locked.
I booted once again in eRecovery to download package from server and recovery but it says getting package info failed.
I tried to install stockrom from sd but it didnot work out.
I still have the bootloader code, but now i cant even install TWRP.
Can anyone please help me?
It is a brand new phone, I even havent use it yet and it's already bricked :'(
I install an service full repair stock via dload
http://androidhost.ru/v5
it is working right now.
oblivion2222 said:
Hi! I just bought a Honor 9 STF-AL00, build: STF-AL00C00B201.
As it is the chinese version, I wanted to rebrand it, so I follow the instructions on https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719.
Unlocking bootloader was successful and as chinese firmware, it did not had a FRP lock.
The first time, rebranding stopped just before the menu.
The second time, I could access the menu and did the install.
But it looks like it did not go as expected because when the phone booted, it did not load TWRP but eRecovery.
So I booted in fastboot, it says phone locked & FRP locked.
I booted once again in eRecovery to download package from server and recovery but it says getting package info failed.
I tried to install stockrom from sd but it didnot work out.
I still have the bootloader code, but now i cant even install TWRP.
Can anyone please help me?
It is a brand new phone, I even havent use it yet and it's already bricked :'(
Click to expand...
Click to collapse
You can always re-unlock your phones bootloader again, the key is always same, then flash or boot twrp with fastboot.
Some developers says the command for oreo is: fastboot flash recovery_ramdisk [file name] but I used this: fastboot flash recovery_ramdisk_a [file name]
You even can try to just boot twrp without flashing it to your recovery by simple typing: fastboot boot [file name]
If fastboot can flash twrp, turn your phone off then hold volume up/+ and power button same time and hold them until the state of unlocked warning appears.
You can use dload method or you can use HuRupdater method to flash firmware. You'll find introduction for how to do it.
Just search on xda
Hello guys and congratulations for the forum.
I have a problem with a LG K7 X210: I accidentally booted with Aristo 2 Boot and now the LG logo remains fixed and does not turn on.
The only accessible mode is fastboot or recovery mode.
I tried to flash with fastboot flash boot, cache and recovery but it still does not work. I found this version MT6580__lge__LG-X210__m13g__5.1__ALPS.L1.MP6.V2.19_ARIMA6580.WE.L_P42
If I try to flash the preloader or to unlock unroot oem i receive FAIL.
If I try with flash tool, it does not recognize it.
I kindly ask you for help, thank you
There's still no solution I'm still with the HardBrick...
looking for firmware LG K7 X210 please ?
I have the same problem
Still hardbrick for you ?
htt ps://ww w.stockrom. net/2017/08/stock-rom-firmware-lg-k7-x210-android-5-1-lollipop.html
Try this to see if it works for you, I do not know if they work because I do not have the device but it was the only thing I managed to find, paste the spaces in the url so that they can access the page
Did it work for any of you?
So tracfone doesn't allow me to unlock the bootloader of my motorola e (xt830c). I know its kinda stupid, but I tried flashing a stock rom for the moto e but for the standard U.S. version to see what would happen. It didn't work, but I was still able to flash the standard Tracfone firmware back. However, I didn't learn my lesson and I decided to try a different version. I didn't work and neither does flashing the tracefone firmware. It only boots the logo, then the fastboot screen and it says:
version downgraded for boot
failed to validate boot image
Fastboot Reason: Fall-through from normal boot mode
USB connected
Is there anything I can do to unbrick it?
Thanks for any help.
ok hear me out, I'm a newbie, and I missed up, plz help
I was trying to root my device following this tutorial, I flashed twrp and vbmeta and every thing went alright without errors, I booted the phone into recovery to continue as how the tutorial said, but it gave me the orange state error and it restarted into system but now the device is factory reset, I enabled usb debugging and went on to follow this tutorial, every thing went same as before and I couldn't boot into recovery, so I decided to flash the "orange_state_disabler_MTK Only.zip" with adb and every thing went downhill from there, It won't boot to recovery, bootloader nor system, It just stays at a blank screen after the logo and the orange state message, It is recognized by adb as "recovery" and I can do adb commands but I can't boot to bootloader to flash the stock firmware, I found this thread and tried using the tool mentioned there, Faced an error, solved it and the phone still won't boot to any thing.
so, is there any way I can get out of this situation ?
TLDR / what you should know/ idk ¯\_(ツ)_/¯
- did something wasn't supposed to do
- can't boot to recovery
- can't boot to bootloader
- device recognized by adb but can't do fastboot commands
- device is recognized by MTKAuthBypassToolV25
- can't shutdown nor restart using phone physical buttons
- don't know if the below screenshots would help with any thing, but here goes nothing
You have misunderstanding, Orange State does not cause anything. That is just notification that bootloader is unlocked, nothing more. Therefore the Orange State Disabler cannot fix anything. You don't need this at all.
But it seems it destroyed fastboot. flash lk from SP Flash Tool
aIecxs said:
You have misunderstanding, Orange State does not cause anything. That is just notification that bootloader is unlocked, nothing more. Therefore the Orange State Disabler cannot fix anything. You don't need this at all.
But it seems it destroyed fastboot. flash lk from SP Flash Tool
Click to expand...
Click to collapse
please explain, I don't know what IK is, and if I could flash things with SP flash tools, wouldn't I be able to flash stock firmware?
lk - little kernel. that is the partition where fastboot lives (and was modified by Orange State Disabler).
you need partition image from stock ROM and any flash tool to restore its original state.
i can't do that because i can't boot to bootloader
you don't need bootloader, only preloader or bootrom
ok turns out ima an idiot and misunderstood the entire situation , this is my first dealing with an mtk device so i thought sp flash tool is like odin and you need to be in download mode to flash things so i panicked, and didn't read well how to use the tool.
flashed stock firmware and the phone is up and running again
thanks for your help man really appreciate it and sorry for wasting your time
hello sir
i have an lg g850um at&t , bootloader is locked, was android 9 stock
did backup first thru qfil lun0-6 and mentioned partitions
then did flash open ca version 10r (G850UM20b_00_OPEN_CA_OP_0427.kdz)
i messed up here because i did not use partition dl option, rather refurbish....or was i doing something else also wrong?
now phone is stuck at bootloader screen
and qfil outputting multiple sahara errors
could anyone please guide me in right direction thanks very much!!!]
i was trying to follow this method: https://forum.xda-developers.com/t/tutorial-crossflash-bypass-opid-mismatched-error.4345963/
dl mode and edl mode is still avaialable, so is fastboot.. and backups.. im just not sure what to do?