Related
if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
jakadewantara said:
if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
Click to expand...
Click to collapse
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
try thread from DoomLORD : [DEV][How-To] Get Back to Stock Even With Broken / Damaged USB Port in http://forum.xda-developers.com/showthread.php?t=1054818
tarzerixx said:
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
Click to expand...
Click to collapse
Likely the USB port is dead and you have to send it in for repair.
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
pccobra said:
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
Click to expand...
Click to collapse
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
RedAxe said:
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
Click to expand...
Click to collapse
Hapenned the same to me...
I try to follow the steps, but i can't pass step 4 (it's unavaiable the "clean cache" bottom...)
Please help...
Restore original firmware with SEUS
RedAxe said:
...then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen...
Click to expand...
Click to collapse
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
do u have trick for my problem here forum.xda-developers.com/showthread.php?t=1388476
my x10 just vibrate once and stack on blank screen.
Sent from my X10i using Tapatalk
When I use SEUS It keep saying "You have the newest software available"
I tried the hard reset and all. The phone now just won't start at all
Hi,
i got the same problem what you describe ive stuck at the SE logo and cant get into recovery and i cant use flashtool. i tried to do what you say in the first post, but when i press the shell root button, it says "wait for device" then its not responding, and i cant moce on to the next step... what should i do now?
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
u totally saved me =D
X10 mini revived!
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
cruzstar said:
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
Click to expand...
Click to collapse
Update phone using SEUS....
Just google SUES
Definitely it will work....
Sent from my X10i using xda premium
yea i have use the SEUS..by pressing the back button..but it dont work..plz help me
Dear sir i already done that procedures but no use in seus shown u already updater software. plz help me
Cannot unbrick xperia mini E10i
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
Hello Guys,
I need your urgent help.
I cannot restore phone with SEUS or Companion. It says I already have the soft.
Getting fatal errors in Flashtool, I am stuck with SE logo and bootloader relocked.
I have the stock kernel but CM7 ROM.
Do you have any other ideas?
Tanks a lot!
deBelch said:
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
Click to expand...
Click to collapse
nope...didnt work...there is NO Install beneath...wonder why? is it i am using the latest SEUS?
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few seconds it boot automatically. and when i try to flash anything it boot automatically. please help me
---------- Post added at 12:21 AM ---------- Previous post was at 12:16 AM ----------
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few minutes it boot automatically. and when i try to flash anything it boot automatically. please help me
My phone was working, I had MiniCM7Pro V21 Installed and I tried to install the CWM Recovery Version 5, because in my installed version the Battery Stats Wipe wasn't working and my battery was draining very quickly.
After the CWM Recovery Version 5 Installation my phone got bricked because it's getting stuck in Sony Ericsson Text.
I am trying to Reflash but only Flash button is active and it doesn't show any firmware though I have copied both zip and unzipped files in firmware folder in FlashTool_0.2.9.1
I tried to use SuperOneClick to root but it gets stuck in Waiting for device. Kindly help.
It gives the following error :-
OK
Pushing rageagainstthecage...
error: device not found
FAILED
I have installed it.
ggsetup-2.2.0.10
Press home+power button until you see black screen, then immediately press and hold back button plugging your phone into computer. When you see black screen and green flashlight-> your phone is correctly booted into restore mode. From this mod, you can restore your phone, using SE restore tools: SEUS and Sony Ericsson Pc Companion, or flash stock kernel using flashtool.
P.S. If you wont see black screen and green flashlight for the first time, try it again, again until you putt your phone safely into restore mode.
Thank you for the reply, the black screen do u mean the black screen with Sony Ericsson Text ? When I Press Home+Power Button I can see the Sony Ericsson Text Black Screen and then I press and hold the back buton Pluging my phone into computer I keep on seeing the Sony Ericsson Text Black Screen with no green flashlight.
I am still trying.
Black screen without any logos. Just black screen. Don't forget to hold back button.
Doing that, but it still gets into Sony Ericsson Text Screen, I press home and the power button, black screen for a while and I press back button and try to connect the phone the Sony Ericsson logo appears.
But When the cable connected and back button pressed the I can see the charging image and green light flash.
and in Flasher it shows the following :-
07/007/2012 23:07:36 - INFO - Device connected with USB debugging off
07/007/2012 23:07:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
camelgrg said:
Doing that, but it still gets into Sony Ericsson Text Screen, I press home and the power button, black screen for a while and I press back button and try to connect the phone the Sony Ericsson logo appears.
But When the cable connected and back button pressed the I can see the charging image and green light flash.
and in Flasher it shows the following :-
07/007/2012 23:07:36 - INFO - Device connected with USB debugging off
07/007/2012 23:07:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
reflash to stock kernel and ROM
- install PC companion.
- connect phone in repair mode
- install drivers.
- after driver installed, reflash stock kernel using flashtool
- after stock kernel installed, reflash stock ROM using PC companion
- after stock kernel and ROM flashed,your phone should be like just when you bought it.
- bootloader should be locked now
- Root again
- unlock bootloader again
- Flash nAa again
- Flash cm7 again
- DONE!
Thank you for your reply, I have PC Companion Installed, I have a Generic Firmware downloaded, I have no idea what a stock kernel is ?
I am not able to get into this repair mode, I think this mode is when the flash light flashes ?
from the Bootloader part, I think I can do it because I did it before following a tutorial. If you can lease help me with the prior stage to bootloader lock would be highly grateful.
Thank u
Ones again: to enter restore mode you have to power off your phone, using home+power buttons or powering off like I have on picture. Then press and hold back button, while plugging it into computer.
camelgrg said:
Thank you for your reply, I have PC Companion Installed, I have a Generic Firmware downloaded, I have no idea what a stock kernel is ?
I am not able to get into this repair mode, I think this mode is when the flash light flashes ?
from the Bootloader part, I think I can do it because I did it before following a tutorial. If you can lease help me with the prior stage to bootloader lock would be highly grateful.
Thank u
Click to expand...
Click to collapse
- To relock bootloader you need to flash stock kernel which is 2.1.0.a.06 kernel.
- You need to flash stock kernel because if you have nAa kernel or any custom kernel installed, you wont be able to repair your phone using pc companion.
- After flashing stock kernel:
1. open pc companion
2. click support zone. (click start below it)
3. after clicking start, there should be a new window which also has a "start button"
4. on the 2nd start button, there should be a button under it which says "repair"
5. after clicking repair, just follow the steps for you to connect your phone in repair mode.
6. complete the repair installation.
7. DONE!
8. Bootloader should be locked now.
Thank you I was able to restore through PC Companion by getting into repair mode, however I didn't use flashtool to flash prior to usin PC Companion.
Thank you both for your kind support, Highly appreciated.
camelgrg said:
Thank you I was able to restore through PC Companion by getting into repair mode, however I didn't use flashtool to flash prior to usin PC Companion.
Thank you both for your kind support, Highly appreciated.
Click to expand...
Click to collapse
You are welcome my friend
And how should I proceed if I have a really hard brick (u20a)?
I tried to flash nAn on it, followed some instructions to unlock the bootloader, but something went wrong, the results were not the ones that should had been, and I made the mistake of turning it off. Now whenever I try to power it on, it doesn't do squat.
The only thing that makes me think it's still alive is that (after several months) I plugged it in and it began blinking on red (perhaps really low battery).
I've tried to pull the battery, put it back in, press back (keeping it pressed), and then plugging the cable to the computer and nothing.
Any ideas? Or should I flush it down the toilet? :crying:
x10 mini unbricking
Mrakoris/ said:
Press home+power button until you see black screen, then immediately press and hold back button plugging your phone into computer. When you see black screen and green flashlight-> your phone is correctly booted into restore mode. From this mod, you can restore your phone, using SE restore tools: SEUS and Sony Ericsson Pc Companion, or flash stock kernel using flashtool.
P.S. If you wont see black screen and green flashlight for the first time, try it again, again until you putt your phone safely into restore mode.
Click to expand...
Click to collapse
i tried the thing you suggested, but the green light only lasts a while even if i continue to hold the back button. also, i am not able to repair my phone through se pc companion, as it keeps cancelling the repair update the moment the green light stops appearing. any help? thanks!
Please I need help, I was trying to turn my Xperia P into AOSP, so I changed an archive as it´s said on this post http://forum.xda-developers.com/showthread.php?p=40055694 and when I pasted the archive suddenly my phone shutted down. Now when I turn it on, it appears sony logo, xperia logo and then the colorful wave moving, but it doesnt charge!!
I tried to flash oficial firmware with flashtool, but when I disconect my phone, shut it down by pressing power and vol+ , and then conect it pressing vol- , it only conects for a moment, and the flash is aborted, here is a pic of it´s reg.
I also tried it with pc companion and others....
Help please
migueltb01 said:
Please I need help, I was trying to turn my Xperia P into AOSP, so I changed an archive as it´s said on this post http://forum.xda-developers.com/showthread.php?p=40055694 and when I pasted the archive suddenly my phone shutted down. Now when I turn it on, it appears sony logo, xperia logo and then the colorful wave moving, but it doesnt charge!!
I tried to flash oficial firmware with flashtool, but when I disconect my phone, shut it down by pressing power and vol+ , and then conect it pressing vol- , it only conects for a moment, and the flash is aborted, here is a pic of it´s reg.
I also tried it with pc companion and others....
Help please
Click to expand...
Click to collapse
Was flashtool working before you did it?
I used it before
ChikeD said:
Was flashtool working before you did it?
Click to expand...
Click to collapse
I used it before, it worked.....
migueltb01 said:
I used it before, it worked.....
Click to expand...
Click to collapse
Looks like it's a problem with the file you trying to flash.
What is your FW version?
try going to help>log devel-debug and then retry.
this had worked for me.
well...
In fact i had JB and the fw that im trying to flash is ICS, but this shouldn´t be the problem... or yes?
migueltb01 said:
In fact i had JB and the fw that im trying to flash is ICS, but this shouldn´t be the problem... or yes?
Click to expand...
Click to collapse
Many people make mistakes by flashing WRONG rom for your specific device. Where are you downloading your Image from and does it match the model with your phone?
Are you on Administrator while flashing the files ?
---------- Post added at 04:51 PM ---------- Previous post was at 04:48 PM ----------
migueltb01 said:
Please I need help, I was trying to turn my Xperia P into AOSP, so I changed an archive as it´s said on this post http://forum.xda-developers.com/showthread.php?p=40055694 and when I pasted the archive suddenly my phone shutted down. Now when I turn it on, it appears sony logo, xperia logo and then the colorful wave moving, but it doesnt charge!!
I tried to flash oficial firmware with flashtool, but when I disconect my phone, shut it down by pressing power and vol+ , and then conect it pressing vol- , it only conects for a moment, and the flash is aborted, here is a pic of it´s reg.
I also tried it with pc companion and others....
Help please
Click to expand...
Click to collapse
Just go to recovery and do wipes and reset your phone. See if that helps
Hnk1 said:
Many people make mistakes by flashing WRONG rom for your specific device. Where are you downloading your Image from and does it match the model with your phone?
Are you on Administrator while flashing the files ?
---------- Post added at 04:51 PM ---------- Previous post was at 04:48 PM ----------
Just go to recovery and do wipes and reset your phone. See if that helps
Click to expand...
Click to collapse
the phone has not recovery... coul it be a driver problem? i have installed the drivers from flashtool, the thing is that the phone doesn´t conect for more than 3 seconds, it shows sony logo, then charging logo and then stills off, even if I conect it pressing vol-
migueltb01 said:
the phone has not recovery... coul it be a driver problem? i have installed the drivers from flashtool, the thing is that the phone doesn´t conect for more than 3 seconds, it shows sony logo, then charging logo and then stills off, even if I conect it pressing vol-
Click to expand...
Click to collapse
Press volume up + power for about 15 seconds untill you feel 3 vibrations, and try to reflash FW.
Mybe you need another FW dile if this one is not working.
Tes flashing ICS files on JB is a good reason for boot loop.
something went wrong when i was trying instal the latest version of TWRP , i had TWRP 2.8.4 already installed, so, i tried install the newest version through of TWRP, now i can't boot my phone, when i try to start , a little vibration happens, i tried do a repair with but pc companion are unable do help me (because bootloader alterations, i guess) can anyone give me a little help ?
I still get a blue light when i connect my cellphone on the computer pressing the volume button
And a red light when i try charge the phone
Edit: BTW, i have the Brazilian version (D6543)
It may be soft brick. Don't worry. Download via XperiFirm the latest rom for your D6543 and flash via Flashtool (to get into Flash Mode click and push vol- and then connect to USB and hold vol- until Flashtool will start flashing)
Bruce666 said:
It may be soft brick. Don't worry. Download via XperiFirm the latest rom for your D6543 and flash via Flashtool (to get into Flash Mode click and push vol- and then connect to USB and hold vol- until Flashtool will start flashing)
Click to expand...
Click to collapse
Exactly, that's what you have to do.
It seems like you've flashed twrp from the other phone.
Sent from Xperia Z2
Luckily not from an iPhone = Yesterdays technology at tomorrows prices
Worked!!!... Kinda, now he boots, iven install the apps, but wen its time to select the language, the phone restarts by himself, wen i try enter in fastboot mode again, i now can see the recharge battery icon.
i guess i'm at halfway to solution my problem, this saturday i will have more time to work on him, thx for the tips, fellows
now its all fine, again, thx for the help
So I think I bricked my phone ya all. I used the one click root after I unlocked boot loader and everything worked fine until I had to reboot my phone. All of a sudden the nfc has crashed pop up made my phone inoperable. I booted into twrp with the intention to wipe cache. After I did that the phone stopped booting all together.
I tried putting the phone in fast pot mode and the blue led displays but it's not being recognized by the pc. I downloaded flash tool hoping I can flash a stock image back but same issues. If I press volume down the led turns green and for a few seconds flash tool will recognize the phone.
Does anyone have any ideas? Phone now turns on but won't go past the splash screen where Sony logo is displayed.
If flash tool recognizes phone and there is light game is not lost. I would call this semi-brick. Did you flash all? Maybe you just need to try again.
orbphobic1 said:
So I think I bricked my phone ya all. I used the one click root after I unlocked boot loader and everything worked fine until I had to reboot my phone. All of a sudden the nfc has crashed pop up made my phone inoperable. I booted into twrp with the intention to wipe cache. After I did that the phone stopped booting all together.
I tried putting the phone in fast pot mode and the blue led displays but it's not being recognized by the pc. I downloaded flash tool hoping I can flash a stock image back but same issues. If I press volume down the led turns green and for a few seconds flash tool will recognize the phone.
Does anyone have any ideas? Phone now turns on but won't go past the splash screen where Sony logo is displayed.
Click to expand...
Click to collapse
Select firmware on flashtool and prepare ot for flashing. When flashtool prompts you to connect your phone, do it then. That way it will stay on flashmode
Sadman Khan said:
Select firmware on flashtool and prepare ot for flashing. When flashtool prompts you to connect your phone, do it then. That way it will stay on flashmode
Click to expand...
Click to collapse
The thing is when I put the phone in fastboot mode it does not vibrate like it used to. Right now the led just turns blue and nothing happens. Flashtool won't even recognize the phone when its in this state. If I disconnect from cable and press the volume down key the led turns green and for a few seconds flashtool will identify the phone but then it stops...
Flashmode is when you use volume down. When flashtool prompts you to connect the phone, only then press and hold volume down button while connecting. The flashing will begin immediately.
---------- Post added at 08:25 PM ---------- Previous post was at 08:22 PM ----------
Fastboot is volume up. That's just for flashing kernels usually. For flashing ftfs use flashmode which is accessed using volume down. First go to flashtool, click on the flash icon, click on flashmode, select the firmware and click flash. Then wait. When flashtool tells prompts you to connect, only then do so. Also, use the latest flashtool and the latest drivers
Sadman Khan said:
Flashmode is when you use volume down. When flashtool prompts you to connect the phone, only then press and hold volume down button while connecting. The flashing will begin immediately.
---------- Post added at 08:25 PM ---------- Previous post was at 08:22 PM ----------
Fastboot is volume up. That's just for flashing kernels usually. For flashing ftfs use flashmode which is accessed using volume down. First go to flashtool, click on the flash icon, click on flashmode, select the firmware and click flash. Then wait. When flashtool tells prompts you to connect, only then do so. Also, use the lastest flashtool and the latest drivers
Click to expand...
Click to collapse
Sadman thank you. That worked.
orbphobic1 said:
Sadman thank you. That worked.
Click to expand...
Click to collapse
Glad to help