Did i Brick my Phone ? - Xperia Z2 Q&A, Help & Troubleshooting

something went wrong when i was trying instal the latest version of TWRP , i had TWRP 2.8.4 already installed, so, i tried install the newest version through of TWRP, now i can't boot my phone, when i try to start , a little vibration happens, i tried do a repair with but pc companion are unable do help me (because bootloader alterations, i guess) can anyone give me a little help ?
I still get a blue light when i connect my cellphone on the computer pressing the volume button
And a red light when i try charge the phone
Edit: BTW, i have the Brazilian version (D6543)

It may be soft brick. Don't worry. Download via XperiFirm the latest rom for your D6543 and flash via Flashtool (to get into Flash Mode click and push vol- and then connect to USB and hold vol- until Flashtool will start flashing)

Bruce666 said:
It may be soft brick. Don't worry. Download via XperiFirm the latest rom for your D6543 and flash via Flashtool (to get into Flash Mode click and push vol- and then connect to USB and hold vol- until Flashtool will start flashing)
Click to expand...
Click to collapse
Exactly, that's what you have to do.
It seems like you've flashed twrp from the other phone.
Sent from Xperia Z2
Luckily not from an iPhone = Yesterdays technology at tomorrows prices

Worked!!!... Kinda, now he boots, iven install the apps, but wen its time to select the language, the phone restarts by himself, wen i try enter in fastboot mode again, i now can see the recharge battery icon.
i guess i'm at halfway to solution my problem, this saturday i will have more time to work on him, thx for the tips, fellows

now its all fine, again, thx for the help

Related

[Q] Help!! My xperia Sola won't boot after flashing a wrong kernel!!

Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
melvinpetix said:
Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
Click to expand...
Click to collapse
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
mirost1 said:
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
Click to expand...
Click to collapse
I've tried connecting sola to PC but it seems like flashtool can't detect it. Is there other way to connect it to PC so flashtool can detect the device? I already downloaded stock firmware
Still no luck
1) Hold power + vol up until you feel the phone vibrates 3 times.
Quickly hold power down, and shove the USB wire in.
It should detect your phone in flashboot now.
2) Alternatively, after the phone vibrates 3 times, keep a hold on vol up to get it into fastboot. Then flash the correct kernel for the rom you have.
Note that ICS, GB and CM roms all use a different kernel. Make sure you have the right one.
3) Lastly, if your phone's bootloader is still locked, you can just repair using SUS.

[Q] [Xperia Go]Strange bricked Xperia Go

First, sorry for my bad English!!
I was using Stock ROM 6.1.1.b.1.10 with Phantom Kernel and do a little change in apps, then suddenly stupid me want to update to Google Bean Z (u can find in Go Development) without recovery neither flash back to Stock. Now my phone's bricked. Every time I boot, it stucks at Phantom Logo but I can access to CWM, I try to flash back via Flashtool but when I connect and hold Power+ Volume -, my computer say Device not Recognized....and nothing happen :| i'm using window 8.1 and I just installed Flashtool 3 hrs ago(I've installed all the drivers), I don't know if this is Flashtool Problem or my phone problem, can anyone detect for me ?
Are you sure you've installed the drivers like this way?
http://www.technipages.com/windows-8-disable-driver-signing.html
In Flashtool drivers your Xperia Go, Flash mode, and Fastboot drivers must be checked.
yup I did that way and all the drivers checked, then I tried to delete USB HUB Driver but when Flashing, installing phone driver still Not Recognized....
USB 3 ports won't work, you must use USB 2 or change in BIOS xHCI to EHCI if you have this option.
Also I read someone said windows 8.1 has no solution yet.
So sad to hear that On the way back to win 7....
Xperia go hard bricked, not starting in flash mode nor fastboot
Sorry, i'm new here, i've downloaded roms and some other stuff here, but now i have a serious problem. I had this GoogleBeAnZP rom on my phone (i had root, unlocked bootloader and CWM) and it was fine!!! actually it was running smooth, but i wanted to try another rom, i tried to instal a JB custom rom that i saw over the internet, so i entered the recovery mode and installed this rom with aroma installer. it said that everything was installed, and that it was going to reboot, so i waited, and NOTHING HAPPEND!!! now, i try to enter flashmode to instal the rom from flashtool and i can't even enter flash mode. my cellphone is really dead, all it does is turn a red light when i connect it. once it turned on the green light like when it enters flash mode but not anymore. I've hold the down button before connecting it, like a hundred times, trying to reboot the phone pressing the up volume button and the power button at the same time but its dead. it keeps showing the red LED indicator but not starting. i've been reading hundreds of posts but no cellphone does what mine does. i tried SEUS, flashtool but both require flashmode and I simply can't enter!!
All i get is this red light from the LED but no response in my phone. the screen doesn't blink neither vibrates
HEEELLLLP!!!!!
bwhite93 said:
Sorry, i'm new here, i've downloaded roms and some other stuff here, but now i have a serious problem. I had this GoogleBeAnZP rom on my phone (i had root, unlocked bootloader and CWM) and it was fine!!! actually it was running smooth, but i wanted to try another rom, i tried to instal a JB custom rom that i saw over the internet, so i entered the recovery mode and installed this rom with aroma installer. it said that everything was installed, and that it was going to reboot, so i waited, and NOTHING HAPPEND!!! now, i try to enter flashmode to instal the rom from flashtool and i can't even enter flash mode. my cellphone is really dead, all it does is turn a red light when i connect it. once it turned on the green light like when it enters flash mode but not anymore. I've hold the down button before connecting it, like a hundred times, trying to reboot the phone pressing the up volume button and the power button at the same time but its dead. it keeps showing the red LED indicator but not starting. i've been reading hundreds of posts but no cellphone does what mine does. i tried SEUS, flashtool but both require flashmode and I simply can't enter!!
All i get is this red light from the LED but no response in my phone. the screen doesn't blink neither vibrates
HEEELLLLP!!!!!
Click to expand...
Click to collapse
Hey bwhite93, did u find a solution to recover the bricked xperia, mine is the same as like yours was, only flashing red light sometimes, no flash mode no fastboot nothing. Was wondering if u found a solution.
Fix
Find the driver intaller inside flashtool and install it if still not work try the pc compinion
Sent from my ST27i using XDA Premium 4 mobile app

[Q] Xperia pro not enter flash(or fastboot) mode. LED blinks only...

Hi guys,
I have mk16i(xperia pro), and installed latest lx cm11 build. Then, I tried dark's kernel. But I wanted to revert to the stock kernel.
Now at that point, i couldn't enter the fastboot or flash mode anymore. The OS running w/o any problem. But i'm stuck with the dark's kernel(which is very battery unfriendly,10 hour standby)
When i try to connect the phone to PC while pressing menu(or back button) the LED blinks for miliseconds and the phone continues switching on normally (enter OS).
I know it is my fault to install nonstock kernel but I really need help. If anyone experienced this issue, it will be great to hear the advice.
Thanks in advance
Try taking out the battery for a few seconds, reinserting it, pressing the button for fastboot mode (I don't know which one you have to use for the xperia pro) and then you connect it to your PC while keeping the button pressed. This should work
Sent from my Nexus 4 running Android 4.4
mihahn said:
Try taking out the battery for a few seconds, reinserting it, pressing the button for fastboot mode (I don't know which one you have to use for the xperia pro) and then you connect it to your PC while keeping the button pressed. This should work
Sent from my Nexus 4 running Android 4.4
Click to expand...
Click to collapse
Thanks for the reply.
I tried it many times. But no chance... The LED blinks then the phone goes into OS.
I tried to reboot fastboot via adb commands. Again same result. Directly goes to OS.
Flashtool also stucks at "Device will soon enter fastboot mode" nothing happens. Phone stays on...
Is it hw fault? I will be very disappointed if so I replaced its digitizer recently by paying too much money.) It was expensive when i bought it also... I cant stand buying a new phone these times... pff too many issues...
Sounds weird. I have made the experience that it sometimes helps to take the battery out, then keep pressing multiply and long the power button. Wait ~10 minutes. Insert the battery and try again!
Hopefully it helps!
Otherwise could maybe be kernel related. Try to flash another one (with recovery).
Depressed T.Bear said:
Sounds weird. I have made the experience that it sometimes helps to take the battery out, then keep pressing multiply and long the power button. Wait ~10 minutes. Insert the battery and try again!
Hopefully it helps!
Otherwise could maybe be kernel related. Try to flash another one (with recovery).
Click to expand...
Click to collapse
We are not able to flash kernel thru recovery in XPeria devices i think.
That is the main problem actually. I m stuck with this kernel...
datumdatzgr said:
We are not able to flash kernel thru recovery in XPeria devices i think.
That is the main problem actually. I m stuck with this kernel...
Click to expand...
Click to collapse
i think you done it allready but better than have adead phone:
- re check if all drivers installed (android sdk with its google driveer, flashtool drivers)
put out battery , put in & hold volume down while plugging cabel in. (if led not stays blue, pull out abttery, put in & reconnect but hold other button like menu key) --> try all buttons
i cant imagine flashing darks kernel broke yr bootloader. theres sth wrong with your machine / setup / whatever.
datumdatzgr said:
We are not able to flash kernel thru recovery in XPeria devices i think.
That is the main problem actually. I m stuck with this kernel...
Click to expand...
Click to collapse
Yea my fault... my main phone's a galaxy s3
If nothing works, you can still "emergency" flash a stock firmware with SEUS, or not?
Depressed T.Bear said:
Yea my fault... my main phone's a galaxy s3
If nothing works, you can still "emergency" flash a stock firmware with SEUS, or not?
Click to expand...
Click to collapse
if he unlocked his bootloader DONT USE SEUS! --> you get a brick...
use flashtool to flash stock ICS ftf .
bejunk said:
if he unlocked his bootloader DONT USE SEUS! --> you get a brick...
use flashtool to flash stock ICS ftf .
Click to expand...
Click to collapse
That goes without saying! But he hasn't said that he unlocked it.
bejunk said:
if he unlocked his bootloader DONT USE SEUS! --> you get a brick...
use flashtool to flash stock ICS ftf .
Click to expand...
Click to collapse
Depressed T.Bear said:
Yea my fault... my main phone's a galaxy s3
If nothing works, you can still "emergency" flash a stock firmware with SEUS, or not?
Click to expand...
Click to collapse
bejunk said:
i think you done it allready but better than have adead phone:
- re check if all drivers installed (android sdk with its google driveer, flashtool drivers)
put out battery , put in & hold volume down while plugging cabel in. (if led not stays blue, pull out abttery, put in & reconnect but hold other button like menu key) --> try all buttons
i cant imagine flashing darks kernel broke yr bootloader. theres sth wrong with your machine / setup / whatever.
Click to expand...
Click to collapse
Thanks for the answers. Yes unlocked bootloader.
Since the device doesn't boot into "flash" mode also, i am not able to flash ftf through flashtool or any firmware via SEUS.
I had managed to enter fastboot mode once!
Happened with USB3.0 port via "adb reboot-bootloader" command.
Still, I am not getting into fastboot again...
I will inform you, thanks guys.
EDIT: I did it once again thru adb in recovery and flashed a stock kernel. Let me see the battery drain is due to kernel or some hw damage.
I am sure hw is damaged...
Ultimately solved...
After i am able to enter fastboot mode via some funny method described above, i erased system partition and flashed kernel.sin of the official .587 ftf file of Sony Xperia Pro.
Now the device is able to enter flash mode and fastboot mode via normal ways...
Thanks guys...
EDIT: I dont understand how is it related to kernel? I thought that bootloader files are damaged which i cannot correct them.
There are many .sin files in the stock .ftf which i cannot flash any of them without flash mode.(i was able to enter fastboot mode only)
datumdatzgr said:
After i am able to enter fastboot mode via some funny method described above, i erased system partition and flashed kernel.sin of the official .587 ftf file of Sony Xperia Pro.
Now the device is able to enter flash mode and fastboot mode via normal ways...
Thanks guys...
EDIT: I dont understand how is it related to kernel? I thought that bootloader files are damaged which i cannot correct them.
There are many .sin files in the stock .ftf which i cannot flash any of them without flash mode.(i was able to enter fastboot mode only)
Click to expand...
Click to collapse
The problem started occuring again. LED blinks again.
This time i am not able to enter fastboot via adb while in recovery mode or another mode. I can't enter fastboot or flash mode, cant install kernel. Tried two pc's many usb cables...
I don't know what to do...
datumdatzgr said:
The problem started occuring again. LED blinks again.
This time i am not able to enter fastboot via adb while in recovery mode or another mode. I can't enter fastboot or flash mode, cant install kernel. Tried two pc's many usb cables...
I don't know what to do...
Click to expand...
Click to collapse
Guys please help. I am very confused now: When i connect the phone to charger(AC) when the phone is OFF, the phone tries to enter flash mode!?! Led blinks green then the phone continues to open and offline charging animation comes as usual.
Sometimes the phone connects the charger in flash mode! But doesnt connect to usb in flash mode or fastboot mode. I know it is a bit confusing but that is the situation.
Thanks...

Bootloop with no working recovery

Hey there,
So I wanted to boot my phone to recovery (which i had installed some time ago) to make a backup, but the phone would just boot normally.
So i decided to install dual recovery from my pc. When it should ask me for root permission it didn't. I thought it's ok and rebooted anyway.
There is sony logo on the screen, then the screen goes black, the phone turns off and shows sony logo again.
I've dealt with bootloops a lot in the past, but How can i escape this loop if I don't have any working recovery?
Please, help me I'm really desperate :crying:
bro u just have to use flashtool and flash the ftf firmware easy download the z2 driver install it download flashtool install it too on ur pc and download the .ftf firmware of the phone and install it.. everything is on youtube ..
abdellahboughrom said:
bro u just have to use flashtool and flash the ftf firmware easy download the z2 driver install it download flashtool install it too on ur pc and download the .ftf firmware of the phone and install it.. everything is on youtube ..
Click to expand...
Click to collapse
I thought about it too but I can't go into flash mode and make my pc detect my phone....
ah do u know how to get into flash mod!! press volume down botton and plug it with pc .. hope it works if no check if the z2 driver is really installed and flashtool drivers too .. hope u fix ur phone
Yeah I know... Everything installed it just won't do anything besides showing sony logo and restarting no matter what I do...
I think it tries to boot into recovery which isn't there
My phone was bootlooping the other day and holding the power button wouldn't turn it off. I found though that Holding Power + Vol Up for some reason gave it a few vibrates and powered it off.
When phone was off I could then hold down Vol Down and plug in for flash mode and reflashed the TFT. Good luck.
tsphan said:
My phone was bootlooping the other day and holding the power button wouldn't turn it off. I found though that Holding Power + Vol Up for some reason gave it a few vibrates and powered it off.
When phone was off I could then hold down Vol Down and plug in for flash mode and reflashed the TFT. Good luck.
Click to expand...
Click to collapse
Archerixx said:
Yeah I know... Everything installed it just won't do anything besides showing sony logo and restarting no matter what I do...
I think it tries to boot into recovery which isn't there
Click to expand...
Click to collapse
yes of course you have to turn the phone off before trying to start it in flash mode. the power plus Vol Up will power off the Phone after the vibrations. after that you need to keep pressing vol Down and connect it to PC flashtool

Sony XZ1 G8431 bricked

Hello guys, i have sony xz1 g431, i bricked my phone when i try to install another rom of another device via twrp. Now my phone no light when connect to pc, no light when charging, flash tool doesnt recognize my phone. When i connect my phone to pc it only shows QUSB_BULK on my pc. I think it lost fastboot or something. I try hold down button, up button or both when connect to pc but still no light and nothing happen.
Please help me fix this problem or atleast some good suggestions to solve this problem. I will really happy for that. Thanks :crying:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
j4nn said:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
Click to expand...
Click to collapse
i have tried it but there's no light. I think it's dead :crying:
@Karl Einstein, have you tried both ways as suggested above?
Maybe you can examine what usb device appear (if any) in each of the described modes (tried to enter flash mode, tried to enter fastboot mode, tried to just plug the phone to usb without holding any button from power off state).
What happens if you try to enter recovery mode (twrp) - having your phone powered off, without usb connection, holding volume down and power, should enter twrp if you had it flashed before.
Do you get any vibration when hold the power button and.volume.key.up?
Karl Einstein said:
Hello guys, i have sony xz1 g431, i bricked my phone when i try to install another rom of another device via twrp. Now my phone no light when connect to pc, no light when charging, flash tool doesnt recognize my phone. When i connect my phone to pc it only shows QUSB_BULK on my pc. I think it lost fastboot or something. I try hold down button, up button or both when connect to pc but still no light and nothing happen.
Please help me fix this problem or atleast some good suggestions to solve this problem. I will really happy for that. Thanks :crying:
Click to expand...
Click to collapse
Well...I think your phone is dead...I'm really sorry to say that, but in this case, that is the only reasonable explanation.
Yesterday I flashed the GSI image, then tried to flash to eXistenZ, it just stuck in the startup interface. However, it can still enter flash mode and fastboot mode, I have no choice but to use the newflasher to re-flash the firmware, it will return to normal.
In general, Sony devices are hard to change bricks, unless the phone is a Japanese carrier's custom phone (generally can not unlock the bootloader, and can only flash some firmware).
I have seen users who have flashed CE firmware for the docomo version and then can't enter flash mode and fastboot mode.Unlike your device,her phone is totally dead...It can't be charged, and there is no prompt to connect to the computer.
If you can buy a motherboard from eBay or somewhere else,you can disassemble your phone,then replace the old motherboard.
Hope these helps.
Thank you guys for all your support. Finally i decided to skip this problem and i will buy a new device
TimCrownie said:
Well...I think your phone is dead...I'm really sorry to say that, but in this case, that is the only reasonable explanation.
Yesterday I flashed the GSI image, then tried to flash to eXistenZ, it just stuck in the startup interface. However, it can still enter flash mode and fastboot mode, I have no choice but to use the newflasher to re-flash the firmware, it will return to normal.
In general, Sony devices are hard to change bricks, unless the phone is a Japanese carrier's custom phone (generally can not unlock the bootloader, and can only flash some firmware).
I have seen users who have flashed CE firmware for the docomo version and then can't enter flash mode and fastboot mode.Unlike your device,her phone is totally dead...It can't be charged, and there is no prompt to connect to the computer.
If you can buy a motherboard from eBay or somewhere else,you can disassemble your phone,then replace the old motherboard.
Hope these helps.
Click to expand...
Click to collapse
Just a side note , why flash existenz on a gsi rom... As it is made for stock Sony only or did I just misread something..
I had the same issue before on my lenovo p2 it lost fastboot and download mode but the PC detect it as qusb bulk then Qualcomm USB h9008 I searched all solutions but no good I think it needs some kind of box to push the modes or change the mother board. So I changed to Sony instead of repair it
Karl Einstein said:
Thank you guys for all your support. Finally i decided to skip this problem and i will buy a new device
Click to expand...
Click to collapse
Sad to ear that...
I had the same issue with my previous Htc10.
As it was still under warranty, I have had to contact HTC support and told them that and OTA bricked it.
They accepted the issue and replaced the motherboard.
I was BL unlocked, rooted and custom rom when it happened and no issue with support as they had no mean to prove it ?.
If still under warranty try to contact Sony support and tell them the same story... Ota bricks my phone ?
lilbrat said:
Just a side note , why flash existenz on a gsi rom... As it is made for stock Sony only or did I just misread something..
Click to expand...
Click to collapse
I've flashed eXistenZ before flash GSI in my phone. I thought GSI image would cover my origin ROM like eXistenZ, so after flash GSI image in,I flash eXistenZ again.
j4nn said:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
Click to expand...
Click to collapse
I have the same issue. My sony xperia xz1 G8342 got sudden dead. (Before dead, I remember I disabled "Developer Mode"). Now its not response by any mean except charging sign when i connect to Power source or PC. Xperia Flashtool shows "device connected with USB debugging disabled".
So, How Can I enter flash mode or fastboot mode? Is My phone recoverable? Please Help.
Thanks
Yesterday I was struggling with my XZ1 Compact and came across this thread that gave me some light to get my mobile phone back.
I guess it's way late for Karl now but just in case, I'm sharing my experience. I was working on my device to get LineageOS 18, as I'm a total newbie with roms I followed the different articles that were posted on Getdroidtips for this particular case: Unlocked bootloader, flashed TRWP and installled lineageos. But then I realized it would be good to have Google Play for restoring my files and apps, but when tried to reboot into recovery mode to get Gapps flashed, Black Screen Of Death started.
After that
with the phone plugged to the pc it wasn't recognized as a device (so adb or fasboot where useless)
the only thing the phone reacted to was to press and hold power + volume up (either for reset or power off)
but no matter what, next boot again BSoD
Tried the Xperia Companion but it prompted that repair was not possible as bootloader was unlocked.
Eventually found this life saver
j4nn said:
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
Click to expand...
Click to collapse
From there, using fasboot I could reboot the device back with the LineageOS. I was still having issues with recovery boot but I'll post that on a different thread.
Thanks again to everyone for sharing thoughts and tips!

Categories

Resources