Hello.i need immediate help from someone who has been through this knows what the problem is.
I have a Lenovo A2010 and a couple of days ago i rooted him via Sp Flash Tool.
I followed every step from this tutorial http://forum.xda-developers.com/gene...-roms-t3288927 and i've installed cyanogenmod 12.1. There was no problem with it but then i had a stupid moment when i wanted to install the stock ROM again. I've installed it via SP Flash Tool and i've gone from the phone for about 5 minutes.When i've come back my phone was turned off and i couldn't turn it on no matter what.
For the last 2 days i've searched every topic on the internet.NO SOLUTION.
This site is my last hope.
I know i did something stupid,but maybe some of you can help me.
Thank you and i wait as fast as you can,for an answer.
Did you try rebooting to recovery? Also please check the link it seems to be dead.
Open the back part of the phone and solder a wire from gnd to kpcolo reflash the rom unsolder the wire and u are good to go
(Ps: srry for my poor english )
Related
Right , Hello
Greetings from Ireland and to any Irish people on this, Hows it going ?
Bought this Goophone i5 from aliexpress there last September, http://www.aliexpress.com/snapshot/262984369.html
Everything was fine until the other day when the screen calibration started to act funny so after many resets and the rest it still didnt fix it I thought to myself right ill try flashing a new ROM to it, couldn't be that hard ? right ?.. I've done this with PSP's many moons ago and thought things would be grand.
So I read loads of tutorials and forums here and decided to give it a go.
I used the flash tools from this thread
http://forum.xda-developers.com/showpost.php?p=43678784&postcount=46
and this rom
http://pan.baidu.com/share/link?shareid=412128&uk=3022339290
The scatter file matches with my phone so im baffled to where the problem is,
My phone wont turn on or boot into recovery mode ,and I've no backup of my initial rom.
I tried flashing it again and everything went fine in flash tools with no errors but the phone still wont turn on or boot, it just slightly vibrates.
Is there anyway where I can completely wipe the phone and re flash it?
Any help on this would be greatly appreciated because I have absolutely no idea where to go from here.
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
(Sorry for new post, a guys ask me to write my ask here)
Hello guys, this is two days I'm looking for how to fix the problem but it's two days that I can not.
There are two days I tried to install firmware on my Jiayu 3s while operating, SP Flash Tool said the root had gone well since that day, impossible to turn on my phone, does not start, but does not load is detected as the "Alcatel DNIS # ** Interface" on my computer, I tried several methods; reinstall the drivers, try to reflash ect .. but nothing happens. I know this method before, I had a Chinese firmware (MOLY.lr9.w1423.md.lwtg.cmcc.mp.v9) , everything had gone well, stages ect ..
But when I tried to flash firmware with Europeans, it was bricked the phone and from that day, I can not do anything.
(Sorry for the bad English but I use Google Translate)
Can you help me solve the problem? I you will be very grateful if someone could help me.
My phone has a non-removable battery.
Regards,
Lackted
I need help please...
I need my phone
Hello after trying to use SPFLASH TOOL to flash my device because i had logo screen loop i end up formating everything and now my phone doesn't start but if i plug in to my computer i can hear the sound of plug in and out, i can still use spflash tool but i have black screen on my phone so i'm here asking for someone to help me find a way to fix this, do i have to build a new rom or system? Just tell me what to do because after Searching the whole internet after my phone i can't find much stuff.
Any help would be appreciated.
What phone model is it bro?
Sorry for not answering in time bro but i finally fixed my phone i had to reinstall like re-flash the entire phone.
My phone is a Qilive Q4 |7 auchan but i already fixed my problem i had trouble finding the stock rom for it since qilive aparently doesn't have any kind of support page but lucky that i found it.
Thanks anyway.
Please i need help. I have a leagoo kiicaa mix and this week i had a message on the phone for an OA update wich i did.
Through the middle of the installation it broke down and showed me an error.. After that the phone didnt boot anymore. I searched on the internet and someone told me to flash the phone again. I found the stock Rom, Flashtool everything, and complete the installation successfully..
But after i unplugged the phone from PC its dead now wont respond to anything,won't charge, won't go on, nothing just dead, and i don't know what to do, or what went wrong. Please help me, is there a chance to save my phone?