[Patch] Fingerprint Capture Enabler - Xiaomi Redmi 3s Guides, News, & Discussion

With this flasheable .zip, you can take photos with fingerprint sensor, both, FPC and Goodix
Also active long press sensor to open camera
Made by Ranjan
Download .zip below, attached file or here https://goo.gl/Mu86nN

ThigSchuch said:
With this flasheable .zip, you can take photos with fingerprint sensor, both, FPC and Goodix
Also active long press sensor to open camera
Made by Ranjan
Download .zip below, attached file or here https://goo.gl/Mu86nN
Click to expand...
Click to collapse
Can you give more information, Work on Miui or Custom Rom (or both) miui version etc...
Thank.

Related

[MOD] CameraMod v2

Hello to all, i was bored so i started to modding the samsung's camera app. I tried to change the audio quality (from 12.8kbps, 8khz, amr => 128kbs, 32khz, aac) but our phone/kernel doesnt support aac encoding (?)
I also tried to change the output 3gpp video to mp4 without luck.
I managed to remove the low battery limitation which was preventing you to take photos/videos when your battery was lower than 15 percent.
Features
Removed low battery limitation.
Power button acts as Shutter button. (Only for camera, not for camcorder)
Geotagging toggle option.
Download
v1: Megaupload
v2: Megaupload
How to install
A) Using CWM recovery
Put the zip in your sdcard.
Go in CWM recovery
Install zip from sdcard
Choose zip from sdcard
Find it and press the home button
When it finishes press reboot system now
B) Using Root Explorer
Extract the Camera.apk from the zip (system/app/)
Put it in your sdcard
Navigate to it with root explorer, and copy it to /system/app/
Reboot your phone
Note: This works on deodexed roms. If your rom is odexed remove /system/app/Camera.odex file with root explorer.
Changelog
v1: Removed low battery limitation (initial release)
v2: Power button acts as Shutter button. (bug with home button, use back button to exit camera app)
Rom chefs - feel free to use this mod in your roms, but please give proper credit for the work and click my thanks button. Thank you.
You're not able to mod the resolution of the videocam?
remygo said:
You're not able to mod the resolution of the videocam?
Click to expand...
Click to collapse
No .
yes, it would be awsome to film with a higher resolution
This is what i want to see a "camera mod"
Hope u find a way to do it
EDIT: I think marcellusbe can help u.
akash.gpta said:
This is what i want to see a "camera mod"
Hope u find a way to do it
EDIT: I think marcellesbu can help u.
Click to expand...
Click to collapse
He told me that he will check the kernel/codecs when he has free time He has many thing to do so... I must wait.
kyrillos13 said:
He told me that he will check the kernel/codecs when he has free time He has many thing to do so... I must wait.
Click to expand...
Click to collapse
I hate waiting
marcellusbe is the only one with considerable knowledge here...we need more of 'em
Woohoooo, i managed to get the power button to take photos!
I want that...
Is geo tagging disabled? Camera fails when it is enabled on default camera aap. using another camera mod, but in it, video recorder doesn't work.
Does this mod fix these? Fingers crossed.
EDIT: WORKS! IT WORKS! Fixed my ****. You're the man!
Thanks thanks thanks
how do i install this? its a zip file
haven't test yet.but will try it soon.why don't you try to mod miui camera?it's more faster than original camera but the video doesn't work on our sg3
aeonstorm said:
how do i install this? its a zip file
Click to expand...
Click to collapse
flash it via CWM
Awesome! I hope the mod gives the camera more useful edits.
Added how to install. Next target: Enable power button as shutter button in videocamera too!
'Self-photography' is impossible with the touchscreen button!
The power-button Mod is a good improvment. Thankyou for that
This might sound odd to you. But how about making the Menu button act as the shutter button? Its at a more convenient place and the back button already serves the purpose of quitting the app.
Pwng3 said:
'Self-photography' is impossible with the touchscreen button!
The power-button Mod is a good improvment. Thankyou for that
This might sound odd to you. But how about making the Menu button act as the shutter button? Its at a more convenient place and the back button already serves the purpose of quitting the app.
Click to expand...
Click to collapse
Hm no. I havent found any sources to do that.
kyrillos13 said:
Hm no. I havent found any sources to do that.
Click to expand...
Click to collapse
Alright. Neva mind. Good work anyway. Looking forward to 6.0!
Anyway you could install this as an normal app (load apk to sdcard and just install?)
aropop said:
Anyway you could install this as an normal app (load apk to sdcard and just install?)
Click to expand...
Click to collapse
Nope. It wont work.

[Q] [SOLVED] How to enable Pressure Sensor / Barometer in ST17i

Hi, does anyone know how to get the Xperia Active ST17i pressure sensor to work with custom roms?
I can see 2 ROMs where it is mentioned: here, that pressure sensor support was added to one of the MIUI ROMs, and here in the NextGen v8 ROM, but I'm not sure what was does to enable it. Can somebody tell me if it is straightforward to do for other ROMs? By that I mean is there a file I could flash via CWM/Fastboot that would let me add support to an existing custom ROM that doesn't have the sensor enabled? (I am currently running a ROM no longer supported by "kamarush".)
Thanks for any tips
I found an answer with the help of Ayush Singh, and a file that domy_xda posted here. I have attached it again here just in case.
You need to unzip the attached and place the file "sensors.default.so" in \system\lib\hw\ and then reboot (You'll need write access to the root using ES File Explorer or Root Manager. I made a back up of the existing sensors.default.so file first, and as soon as I copied the attached file, using ES File Explorer, the phone spontaneously rebooted.) I can confirm it is working with apps including SyPressure

[PORT]Mi 8 Video wallpaper and any 4khdr 60fps video for lockscreen and homescreen

Unrar the video folder copy the video folder in root/system/media/lockscreen/
HOW TO APPLY : Go to theme (Tested miui 10 beta),click the extreme right icon( smiling face) in bottom,then go to wallpaper, chose my videowallpaper
DOWNLOAD
U can use any video as video wallpaper.
1. Create .videowallpaper folder inside MIUI folder in sd.card
2. copy any video of your choice inside this folder
3. delete the.extantion of video. Example : suppose u copy Nature_hdr_60fps_4k.webm , then just delete .webm
4. Now apply video wallpaper from my wallpaper section in theme app
Watch the video wallpaper in action Here
works well
SS pls
Exception (bad rararchieve)
Can u explain better the steps to apply, thanks.
Thanks!
Hi, I also installed MIUI 10 beta but the theme app is gone. I installed it from apkmirror but it still does not appear in the app drawer., and I didn't find "root/system/media/lockscreen/" on the device by plugging it through USB. Could you explain a little bit more how you did this, please ?
PocoSteve said:
Hi, I also installed MIUI 10 beta but the theme app is gone. I installed it from apkmirror but it still does not appear in the app drawer., and I didn't find "root/system/media/lockscreen/" on the device by plugging it through USB. Could you explain a little bit more how you did this, please ?
Click to expand...
Click to collapse
if not theme coming plese flash the rom again hope this time u will see the destination folder. u can also creaet folder inside miui folder in sdcard.Name that folder as ".videowallpaper" dont forget to add dot.Now place any video file inside that folder and delete the extension of video file. Ex suppose u place nature4k.mp4 then delele .mp4, so file become nature4k.Now apply the video wallpaper from theme ME section
Any chance it works with MIUI 9.6 ?
iamsabresh said:
Any chance it works with MIUI 9.6 ?
Click to expand...
Click to collapse
test your self
This is working, but its not smooth, once it gets to the end of the video and reverts back, its like jumping from the end to the beginning..
kramnod said:
This is working, but its not smooth, once it gets to the end of the video and reverts back, its like jumping from the end to the beginning..
Click to expand...
Click to collapse
delete all data from theme app ,u found in installed app.Then delete delvik and cache from twrp

			
				
Can anyone mirror the file? It always says corrupted for me
Can someone make flashable zip? Also are wallpapers from this video belowe available? It is beautiful.
https://www.youtube.com/watch?v=_nwGYULJmeQ
How was the battery consumption?
Do I need a root permission to use this? It didn't work in MIUI 9.6.25.0 I've tested and trying to do it with the correct steps, still, it didn't work :/
Bad rar file can not open it
it will automatically set on both homescreen and lockscreen once I selected a videowallpaper, can I only have videowallpaper on lockscreen and a normal image wallpaper of my choice on home screen?
I can't do anything because the default file manner of Xiaomi can't reach root folder! Any solution? I already have es file explorer

[tutorial] gcam install on m31

Hey Guys. This is a tutorial to bring out the best in your phone camera by installing GCAM. In this case we will be installing a made for exynos variant of gcam called ZGCAM. Same software optimization but built for exynos.
To get all features follow this step by step guide. (HDR+, PANORAMA, LENS BLUR,VIDEO ETC)
First download this apk from my media fire link. (The actual website will push ads to you which no one likes)
Link removed.
Download and Install this .APK file.
At first when you install it, only video and other minor features will work, but camera mode won't work.
To fix this we must use a custom config file to use ZGCAM for our specifications.
First Go to your default files app
When u install ZGCAM a new folder will popup in your internal storage (Phone Not SD) and it will be called GCam
If a "Configs" folder isn't present, create one (inside gcam directory).
After this download this file - M31CONFIG.xml
https://www.mediafire.com/file/u95oyhsvrceqjwe/M31CONFIG.xml/file
Move this file from Downloads to Gcam-Configs folder.
After this open ZGCAM (on the home screen it will be called camera with a red shutter logo)
Touch and hold a black are in the ui at the bottom for around 3 seconds (not any of the buttons). After that an option will popup, saying RESTORE CONFIGS, and after that because u moved the config file, u will get an option to restore this config.
After that u will have working GCAM for your samsung 31.
Credit: koopahtmaniac
himsplash
Hdr doesn't do anything?
Config restoration is important as hell
RashidD said:
Hdr doesn't do anything?
Click to expand...
Click to collapse
go to this link, i learnt how to restore configs here
https://www.celsoazevedo.com/files/android/google-camera/f/settings09/#:~:text=To%20load%20a%20config%20file,config%20file%20has%20been%20loaded.
So far so good, but I don't see nightsight working..
Hey can you explain the part where I have to touch and hold something in the camera ui
Anubhav453 said:
Hey can you explain the part where I have to touch and hold something in the camera ui
Click to expand...
Click to collapse
Press and hold on the black ui
Thread temporarily closed. Sorry for the inconvenience.

60 fps mod for 1080p

This mod enables [email protected] on front&back camera, you must turn off image stabilization in settings to work and ofc this is for rooted devices on stock roms, file included must be copied in /system/cameradata, If you want rename original camera-feature.xml 1st and then copy modded file and reboot phone.
[email protected] said:
This mod enables [email protected] on front&back camera, you must turn off image stabilization in settings to work and ofc this is for rooted devices on stock roms, file included must be copied in /system/cameradata, If you want rename original camera-feature.xml 1st and then copy modded file and reboot phone.
Click to expand...
Click to collapse
After I add this file, can I unroot my device?

Categories

Resources