Related
Hello guys, i need help ..
I wanted flash this custom ROM on my LwW, so I rooted device, installed CWM, unlocked bootloader, wiped data/cache/dalvik and flash it. But now is phone lagged on boot screen (Ĺ ONY logo) ... i cant go to CWM, when i want restore via SUS, it says: The phone contains modified software that cannot be updated; and flashtool lags in flash process in text - Reading device information.
Can I do anything? Please help. :crying: thanks
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
gouthamthemostwanted said:
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
Click to expand...
Click to collapse
I two days ago we had many problems with Flashtools ... In the middle of Flashing the device stopped working always the same error 31. I tried for over 30 vezez and sometimes not recognize the computer. Oh I did so I removed the battery from the phone and I slept early the other day when I woke up I was flashing again and it was the first time I was really surprised. I ran back to Stock GB Rom with kernel bboof ....
Good ! :beer::thumbup:
.:goutham:.
gouthamthemostwanted said:
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
Click to expand...
Click to collapse
Still lags on "Reading device information" .. but i relock bootloader via toolkit by quangnhut123, next SUS recognized device and i flashed back to 4.0.4 stock ROM .. next i tried flash Real ICS r6 ROM, but that same progress like before (phone lags on SONY logo, and i cant do anything) .. what Im doing wrong? When i flashed, i had rooted 4.0.4 stock ROM, fw .578, unlocked bootloader, installed CWM...
deryck.vyhybkar said:
Still lags on "Reading device information" .. but i relock bootloader via toolkit by quangnhut123, next SUS recognized device and i flashed back to 4.0.4 stock ROM .. next i tried flash Real ICS r6 ROM, but that same progress like before (phone lags on SONY logo, and i cant do anything) .. what Im doing wrong? When i flashed, i had rooted 4.0.4 stock ROM, fw .578, unlocked bootloader, installed CWM...
Click to expand...
Click to collapse
Which kernel you are using ?
did you wiped everything before installing custom rom ?? (data,system, cache, dalvik cache)
Hi guys,
I'm not an Android expert, but AFAIK is a Linux system.
I'm quite familiar with Unix/Linux world and wondering if there's a way to see the messages during boot just like on a console?
I'm asking, beacause my ray hangs at sony-ericsson logo, and can't figure out what's wrong with it.
Thank you!
to solve problem .. flash your stock .ftf again with flashtool
Well u can use adb for that...use adb logcat...search in xda if u don't know how to use adb...it will give u a complete log as u need
Cheers,
AJ
Mohamed Hashem said:
to solve problem .. flash your stock .ftf again with flashtool
Click to expand...
Click to collapse
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
nroberto13 said:
tried to flash stock gb .42 ftf, but still the same, and cwm is gone now, since custom kernel was overwritten by stock one.
regarding adb, all the adb tutorials mentiones to use usb debug mode, but how can I activate debuge mode, once my phone doesn't boot?
thanks.
Click to expand...
Click to collapse
i think usb debug will not work anyway if ur phone powered off
try to flash custom kernel again , then u will have CWM , then remove your SD Card and put it in reader , then put any ROM in it , then put it again in ur phone , then flash it with CWM , i made that before with CM ROM & it worked :good:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
nroberto13 said:
I tried to flash cutom rom with cwm before flashing stock, but didn't work .
The phone is not powered off when flashing, it's either in fastboot or in flash mode.
Click to expand...
Click to collapse
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
mihahn said:
Do you know why it's not booting? Did you flash a new rom, did you install a special app, did you do an update over the air (using WiFi)? Or any other idea?
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
I flashed a custom rom.
Actually, i was on ICS, and wanted to try custom GB illuminative.
Flashed the v10, everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash some times the rom without issues, but the last was unlucky .
By that time, my BL was locked, so I had to root my phone to install cwm.
Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the process over and flashed GB .42, rooted with doomlord, script, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
basically these were the steps I was doing, and after a cwm flash of the custom rom, the phone ended hanging at sony logo.
I then tried different kind of stock firmwars ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flash a version of the illuminative custom rom which was working before, but still the sam. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same.
now, cwm is gone, as stock kernel overwrote the custom one.
That's the story .
As i remember i can enable usb debug even phone not boot to system. By charging phone with pc(not standard charger) then hold power button and at windows(or else) will ask for driver
Ps. I did that with X8, didn't know with 2011's phone.
Sent from my ST27i using xda app-developers app
Hmm okay you could try to flash the unbricking ftf (you can find it in someguyfromhell's sticked thread) and afterwards stock gingerbread or ics again, but I don't know if that could work or maybe make it even worse (normally it's to unbrick if you did an ota update on unlocked bootloader, but let's see). Maybe it's worth a try
The problem about cwm that's gone: if you are still able to boot into fastboot mode, you can flash another kernel and for example try to install cyanogenmod or any other rom. Just try cm10 or cm10.1. Maybe in the end a rom will boot
Sent from my SK17i running stock ics (.587)
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
nroberto13 said:
tried, and still the same.
The only reason I can think of is that I may forgot once to enable usb debugging, and used flashtool with usb debugging off. could that lead to this kind of issues?
How could I enable usb debugging, without being able to start the phone OS?
tried eswawan's advise, but didn't work.
PS. when I connect the phone in flash mode, flashtool says phone connected with USB debugging off.
Click to expand...
Click to collapse
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
eswawan said:
Is you connect phone(off) to pc then it goes to offline charging mode???
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
yes, it goes to offline charging mode!
mihahn said:
No, USB debugging off shouldn't lead to such a problem
Try to reinstall all drivers for all devices/modes from flashtool-> drivers. Then you turn the phone off, take off battery, wait 15 seconds, reinsert battery, hold volume up and while holding volume up just connect the phone via usb to your pc. The blue notification led should light up now and then you should be able to flash another kernel. Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
nroberto13 said:
yes, it goes to offline charging mode!
during my unbrick journey, I did reinstall my windows, and drivers, and didn't help, so I don't think it would make any sense to try once again ...
Click to expand...
Click to collapse
With the procedure I posted above it shouldn't simply boot to offline charging mode, so maybe it is a driver problem. Try it step by step like posted above, maybe it could work. If not it was worth a try
Sent from my SK17i running stock ics (.587)
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
PS. not sure if it's right, but when I connect the phone to pc, connects in flash mode, even if I don't hold vol down, the notification led is solid green, then the led turns off, Sony Ericsson appears, then the battery with the power sign and finally notification led turns orange. when I short press power button now, the battery with power sign shows up on screen.
nroberto13 said:
what does it mean if it goes to offline charging mode, also what does it mean if it doesn't go?
Click to expand...
Click to collapse
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
mihahn said:
Normally while having phone switched off and just holding volume up and connecting to pc the blue led should light up and you are in fastboot mode. If it goes directly into offline charging mode are the wrong drivers installed or you do something wrong or phone is hardbricked...
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Sorry, I think I wasn't clear enough. I thought I should be connecting the phone without holding any of the volume buttons, just to try if it's charging in offline mode. Here's the exact status.
1. If I do not hold any volume buttons, the phone goes into flash mode ( solid green led ), and after a short while ( 20-30 sec ) led turns off, Sony Ericsson logo shows up, then goes away and battery with power sign is displayed when I short press the power button
2. if I hold vol down, phone behaves the same way as at 1.
3. if I hold vol up, phone goes in fastboot mode ( solid blue led ) and stay solid blue, it is not going into charging mode.
Abhinav2 said:
Umm...as much as I cud understand....u have used sus before flashtool with unlocked bootloader which MIGHT cause the problem...Try these steps(@mihahn though mentioned earlier) -
1. Uninstall flashtool and delete everything related to it.
2. Now reinstall it to your c: drive.
3. Go to C:/Flashtool/Drivers and install flashtool-drivers.exe with all the drivers.
4. Now download this http://www.multiupload.com/Q103V01CV1 and keep it in C:/Flashtool/firmwares(delete everything present in it already)
5. Now start flashtool.
6. Remove battery from your phone and keep the battery out for 15 sec.
7. Reinsert the battery hold down vol-down button and connect your phone to usb cable connected to pc.
8. Now click on the flash icon and select flashmode and flash the files.
9. Now download this - http://www.mediafire.com/?2j7i7rruqxnui3q
10. Now keep it in firmware folder. REMEMBER to delete any previous files prent in the folder.
11. Now go to flashmode in the same manner and flash it.
12. Now boot your phone, it must start
Cheers,
AJ
Click to expand...
Click to collapse
I may not be clear enough here either. I didn't use sus after unlocking BL, I know it bricks he phone, anyway, I did flash the unbrick ftf mentioned by mihahn. here are the steps I did so far :
1. I was on ICS ( Iced Bean 3.4 ) , with BL lockedand phone rooted and wanted to try custom GB illuminative.
2. I flashed the rom with cwm, and everything was fine, but Ant+ wasn't working, and dev of the rom was helping me to get ant+ working on the device, so he added things to rom required for ant. I did flash the rom several times, without issues, but the last was unlucky .
3. Interestingly the cwm was gone after each rom flash, not sure why, so I had to take the rooting process over and flashed GB .42, rooted with flashtool, installed x-parts, then cwm from x-parts, and then flash custom rom from cwm.
4. and after a cwm flash of the custom rom, the phone ended hanging at sony ericsson logo.
5. I then tried different kind of stock firmwares ( ICS, GB ) to flash with flashtool and SEUS as well, without any luck.
6. afterwards, I unlocked my BL, flashed cusotm kernel with flashtool ( containing cwm ) , then flashed a version of the above mentioned GB illuminative custom rom which was working before, but still the same.
7. somebody then advised to flash again a stock ftf, I did a stock GB .42, but still the same, now, cwm is gone, as stock kernel overwrote the custom one.
8. tried to flash someguyfromhell's unbrick ftf, which is for the FOTA brick whith BL unlocked, as I understood.
9. reflashed stock GB .42 with flashtool, but phone still hangs at sony Ericsson logo.
In this status, could I connect to the phone using adb, so I could do a adb logcat ?
If so, please advise how.
Thanks.
@nroberto13 Do you mind telling us which ftfs u flashed?
Cheers,
AJ
Hi
I have xperia neo v 11wxx
- performed unlock with test point (paid service) - all went ok
- flashed new soft with CWM - all went ok - flashed kernel in zip ICS_Spacious_Smooth_Light_ODEX_v2
After flashing phone stays at SE logo nothing happens
I Can't enter fastboot and flashboot mode
in fastboot the diode flashes blue for a sec and nothing happens
in flashboot (flashtool or companion or suse or manul) nothing happens
The phone is not detected properly (in flashtool i have to select my model manual) in companion it say "null"
In flashtool after manual selection it says that the phone flash is emty (no files in /system folders etc) no root ........
In s1tool after identify it gives some usb device error and missing file.
Iv also tried 3 diffrent computers (win8 - with driver signing off, 1x xp laptop , 1x win 7 laptop)
Tried diffrent drivers and diffrent cables
It look like kernel problem. Did you flash a kernel from zip package rom?
When you will want enter to fastboot mode turn off you device and put menu button and now connect phone to PC.
----------------------
Sorry for my bad English
tgrobi said:
It look like kernel problem. Did you flash a kernel from zip package rom?
When you will want enter to fastboot mode turn off you device and put menu button and now connect phone to PC.
----------------------
Sorry for my bad English
Click to expand...
Click to collapse
Yes iv flashed kernel from zip
I cannot enter fastboot (like i said blue led diode flashes and notthing happens)
The problem with fastboot started right after unlocking with testpoint.
Can you write what Rom you flashed?
tgrobi said:
Can you write what Rom you flashed?
Click to expand...
Click to collapse
ICS_Spacious_Smooth_Light_ODEX_v2
abaddon6661 said:
ICS_Spacious_Smooth_Light_ODEX_v2
Click to expand...
Click to collapse
It's good.
It seems like drivers problem.
But when you enter to fastboot mode the led blue flashes every time or fleshes on the moment and off.
If blue led off it's mean drivers problem for me.
I dont understand...if you cant enter fastboot mode,so you cant flash any kernel.My question,how you flash kernel from the zip actually?
flashes on the moment and off
iv tried many drivers nothing works
iv flashed zip in CWM
abaddon6661 said:
flashes on the moment and off
iv tried many drivers nothing works
Click to expand...
Click to collapse
Try to do hard reset. Remove the battery for 15 minutes.
Or try connect your phone to the mains without the battery for 15 minutes.
I see...actually you are not flash kernel,because kernel cant flashed through CWM.kernel ONLY can be flash through PC...
Sent from my MT11i using xda app-developers app
Your phone is not bricked. Had you unlocked your bootloader? New kernel can only be installed with unlocked bootloader in fastboot mode.
Open PC companion and select update phone, then remove battery, wait for 30 seconds, reinstall battery and connect phone to PC while pressing the back button, now follow instructions on PC. If this does not work you will need 'Sony_Ericsson_Update_Engine' which is no longer available on Sony website. If your bootloader is unlocked then you can install the stock kernel through fastboot mode and then flash stock ICS ROM through flashtool.
tgrobi said:
Try to do hard reset. Remove the battery for 15 minutes.
Or try connect your phone to the mains without the battery for 15 minutes.
Click to expand...
Click to collapse
Iv removed battery for 24h - no effect
Connecting without batter - no effect
mustang2011 said:
Your phone is not bricked. Had you unlocked your bootloader? New kernel can only be installed with unlocked bootloader in fastboot mode.
Open PC companion and select update phone, then remove battery, wait for 30 seconds, reinstall battery and connect phone to PC while pressing the back button, now follow instructions on PC. If this does not work you will need 'Sony_Ericsson_Update_Engine' which is no longer available on Sony website. If your bootloader is unlocked then you can install the stock kernel through fastboot mode and then flash stock ICS ROM through flashtool.
Click to expand...
Click to collapse
i have unlocked bootloader (test point - paid for this)
Pc companion detecting phone as "null"
Pressing back button - no effect. Phone not entering fastboot or flashmod mode
abaddon6661 said:
i have unlocked bootloader (test point - paid for this)
Pc companion detecting phone as "null"
Pressing back button - no effect. Phone not entering fastboot or flashmod mode
Click to expand...
Click to collapse
When you connect phone to mains does battery is charging?
Maybe microUSB port is damaged.
abaddon6661 has right, your phone isn't bricked.
----------------------------------
Sorry for my bad english
tgrobi said:
When you connect phone to mains does battery is charging?
Maybe microUSB port is damaged.
abaddon6661 has right, your phone isn't bricked.
----------------------------------
Sorry for my bad english
Click to expand...
Click to collapse
Battery is charging.
The problem is that i cannot reflash or enter fastboot.........
abaddon6661 said:
Battery is charging.
The problem is that i cannot reflash or enter fastboot.........
Click to expand...
Click to collapse
Can you enter CWM?
no
abaddon6661 said:
no
Click to expand...
Click to collapse
SUS (not SUSE) not detect phone too? In SUS is repair options.Your phone isn't brick SUS should repair it.
I spoke with a guy who had a similar problem. PC not detect phone and hi can't enter to fastboot mode. His phone has problem to battery. System kept that battery is low (0%). Exchange battery helped.
--------------------------------
Sorry for my bad english
I flashed the wrong rom on my Xperia Z2, I tried fixing it by flashing tft file, but I couldn't even get the device into flashmode (Power + Vol up), It just never vibrates, when I put it in the charger it just keeps blinking red.
What's the proper fix for this? and is this a soft-brick or hard-brick? Please help.
RevolverForce said:
I flashed the wrong rom on my Xperia Z2, I tried fixing it by flashing tft file, but I couldn't even get the device into flashmode (Power + Vol up), It just never vibrates, when I put it in the charger it just keeps blinking red.
What's the proper fix for this? and is this a soft-brick or hard-brick? Please help.
Click to expand...
Click to collapse
Flashmode is not Power button + Volume up. But...
Connect USB to ur computer
Then Hold the Volume Down key on your phone while u connect the USB Cable to the phone.
If you successfully get to flashmode, then u can flash an FTF file for ur phone. (This will also wipe internal sd files if you don't untick 'data' under wipes) Then again, phone might not boot properly if you don't wipe as u said something about custom ROM.
OR Follow these steps I found on Sony website
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
Tried using flashtool with Vol down buut
18/058/2014 23:58:26 - ERROR - Drivers need to be installed for connected device.
18/058/2014 23:58:26 - ERROR - You can find them in the drivers folder of Flashtool.
I'm sure that I have the drivers installed as I tried earlier today to unlock the bootloader through flashtool (which didn't really work out) and it recognized the device just fine.
right now it doesn't even show the Sony logo..I'll try PC Companion method in seconds..
EditC Companion is asking me to make sure that the battery level is above %80, when I was flashing the new rom, the battery level was around %50, should I care about this, or is it just an extra precaution? because I don't really see a way for me to know the battery level.
RevolverForce said:
Tried using flashtool with Vol down buut
18/058/2014 23:58:26 - ERROR - Drivers need to be installed for connected device.
18/058/2014 23:58:26 - ERROR - You can find them in the drivers folder of Flashtool.
I'm sure that I have the drivers installed as I tried earlier today to unlock the bootloader through flashtool (which didn't really work out) and it recognized the device just fine.
right now it doesn't even show the Sony logo..I'll try PC Companion method in seconds..
EditC Companion is asking me to make sure that the battery level is above %80, when I was flashing the new rom, the battery level was around %50, should I care about this, or is it just an extra precaution? because I don't really see a way for me to know the battery level.
Click to expand...
Click to collapse
I'm sure 50% is enough to install through PC Companion unless ur battery is bad.
And do you by anymeans use windows 8? If you do, Did you disable driver signature while installing Flashmode, Fastboot and Z2 drivers from the C:\Flashtool\drivers folder, or where ever u installed flashtool to.
I believe I didn't disable driver signature, I connected the device to a different usb port too just to be sure, my OS is windows 8.1.
PC Companion is updating the phone right now, I'll see how it turns out and report back to you, thanks.
Edit:It worked, my phone is alive, thank you, stanley <3
RevolverForce said:
I believe I didn't disable driver signature, I connected the device to a different usb port too just to be sure, my OS is windows 8.1.
PC Companion is updating the phone right now, I'll see how it turns out and report back to you, thanks.
Edit:It worked, my phone is alive, thank you, stanley <3
Click to expand...
Click to collapse
There's no keeping that Bad Boy down! Cheers mate!
Hello guys, i have another problem with my M4. After i flashed Xposed (but no wipe cache) my phone does not work perfectly (errors with some application in sd card) and i decided to restore it to stock firmware. The firmware i am trying to use was already flashed other time and it work fine. But now, when i try to get into flashmode the green led light up for 1 second, then light off and another time light up but not stuck into flashmode. I have all drivers on my pc and it recognize the phone as SOMC flash device, but the green led is down and Flashtool not start flashing.... What can I do? Fastboot and recovery mode works fine.
alby_var said:
Hello guys, i have another problem with my M4. After i flashed Xposed (but no wipe cache) my phone does not work perfectly (errors with some application in sd card) and i decided to restore it to stock firmware. The firmware i am trying to use was already flashed other time and it work fine. But now, when i try to get into flashmode the green led light up for 1 second, then light off and another time light up but not stuck into flashmode. I have all drivers on my pc and it recognize the phone as SOMC flash device, but the green led is down and Flashtool not start flashing.... What can I do? Fastboot and recovery mode works fine.
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/m4-aqua/general/tut-blu-twrp-root-xperia-m4-aqua-t3238962
Thank you, but still no flashmode. When I try to charge (from power off device) the green light do the same thing of when I connect phone in flashmode to pc... Now its charging in fastboot mode
Make sure, use usb 2.0, not usb 3.0?
Yes, usb 2.0 , and original cable...
Update: if i connect to pc i see SOMC FLASH DEVICE into device manager. But flashtool not start flashing....
Ok guys, I am able to boot in recovery, can please someone give me a backup of system and boot? I will infinite thanks...
alby_var said:
Ok guys, I am able to boot in recovery, can please someone give me a backup of system and boot? I will infinite thanks...
Click to expand...
Click to collapse
This is my Boot-backup. I haven't space for system-backup.
https://app.box.com/s/6okdn3wafe6mh3y4yhfe451nm0hwasah
Really Thank you! Without boot and system i can't use the phone and i need it. Again, Infinite thanks...
alby_var said:
Really Thank you! Without boot and system i can't use the phone and i need it. Again, Infinite thanks...
Click to expand...
Click to collapse
Check your P-M box...
Anyone have a backup of system that please can send to me?
@alby_var
Did you try twrp sideload adb push ?
yes, i tried adb sideload but say a thing like: protocol fault (no status)
Here is some thing that worked for me, even i could not get into Flash Mode.
turn off your phone
run flash tool, select the firmware you want to flash and click flash, wait for the tool ask you to connect the phone.
Now connect the USB cable to the phone with the Volume down pressed and do not let go of the volume down button until the flash process is done.
if the phone is still not detected, do the same but change the USB port.
it happens to me that if i let go of the Volume down button, the phone disconnect from flash mode.
if you are able to boot to home screen then it best to boot to fastboot using the option in Flash tool and then disconnect the USB cable, and then start the Flash process
Good Evening/Hello/Hi,
Even, I have the same a problem with my Sony Xperia M Dual(C2004). After i flashed my phone does not work perfectly (errors with some application in sd card) and i decided to restore it to stock firmware. The firmware i am trying to use was already flashed other time and it work fine. But now, when i try to get into flashmode the green led light up for 1 second, then light off and stuck into flashmode. I have all drivers on my pc and it recognize the phone as SOMC flash device, but the green led is down and Flashtool not start flashing.... What can I do? Fastboot and recovery mode works fine.