All,
Last night my Le Max Pro x910 showed a blue LED light, and would not respond. I held power for 10 seconds and it appeared to shut down (the blue light turned off). However, now it does nothing.
It does not charge or show an LED when plugged into the factory charger.
I tried holding power and volume up for 5 seconds but it did not boot.
Even though I have a le max pro, is there a particular way with LeEco to boot to recovery or hard reset the phone?
Thanks!
Have you tried press Volume Down + Power for booting into fastboot mode?
Yes no luck. I googled and it appears that it is hardbricked. Because when plugged into my windows computer it shows "Qualcomm 9008". How this randomly occurred is odd and sad.
LxMxFxD said:
Yes no luck. I googled and it appears that it is hardbricked. Because when plugged into my windows computer it shows "Qualcomm 9008". How this randomly occurred is odd and sad.
Click to expand...
Click to collapse
easy fix.
use that guide:
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
if you get the split screen issue, dont panic, just flash bootloader from stock rom. dont take it from 16s.
you'll see...
Gesendet von meinem LEX820 mit Tapatalk
BananowyPotwor said:
Have you tried press Volume Down + Power for booting into fastboot mode?
Click to expand...
Click to collapse
A.N.Droid said:
easy fix.
use that guide:
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
if you get the split screen issue, dont panic, just flash bootloader from stock rom. dont take it from 16s.
you'll see...
Gesendet von meinem LEX820 mit Tapatalk
Click to expand...
Click to collapse
I'd like to give this a try but sadly, all the download links in the article are broken
You can try this
https://mega.nz/#F!0gwgxbxD!-iud2O-6uZ0F3Geofz-NyA
I found it here : https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
leptdre said:
You can try this
https://mega.nz/#F!0gwgxbxD!-iud2O-6uZ0F3Geofz-NyA
I found it here : https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Click to expand...
Click to collapse
It turns out that holding the power + vol for TWO Minutes as per the article got the phone to a dead battery flashing LED. I charged it and it came back to life. WHo knew i'd have to hold power for TWO minutes. Strange LeEco devices.
Glad its back but downloaded the files and saved the guide for if this happens again.
LxMxFxD said:
It turns out that holding the power + vol for TWO Minutes as per the article got the phone to a dead battery flashing LED. I charged it and it came back to life. WHo knew i'd have to hold power for TWO minutes. Strange LeEco devices.
Glad its back but downloaded the files and saved the guide for if this happens again.
Click to expand...
Click to collapse
I hope it won't happen again, i think it would be simple to just open the phone and disconnect the battery physically. But oops you have to break the screen :crying::crying::crying::crying::crying:
Just keep those files safe. it would be nice if you can mirror them to Mediafire
I had this problem, but I managed to get into fastboot by holding power button + vol down while plugged in to PC.. Then I flashed EUI rom using TWRP. The problem, after flashing the ROM, when I try to restart into System, the screen went black only, and LED light blinking... Thankfully I went out and forgot my device is still plugged in to the PC, and behold, it turned ON by itself.. If you have the blinking LED problem after flashing clean EUI rom, try to plug it in your PC and let it charge there for an hour. (When it starts to boot in the EUI, plugged it on your wall charger for about 30 mins)
Related
Xperia S Issues. Bad Flash
Hi, I read the 'existing users' installation instructions on the Sspeed ICS rom and installed the rom without installing the ics rom and kernel (I was tired). When booting, I go in a bootloop with the doomkernel screen. I can access recovery fine.
When holding vol+ and connecting to PC the phone goes back into it's bootloop and does not boot into fastboot.
When holding vol- and connecting to PC the phone flashes the green led and then boots into bootloop.
If I wait until the phone vibrates and lights up blue I can press the button to access recovery. I thought I could then just copy a gb rom over using USB mount but it is not detected on the PC.
Any help would be greatly appreciated.
Thank you
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
arc_u said:
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Thanks but like I say fast boot and flashmode don't work so I can't access this option
I have the same problem too... I was hoping it would just work, but apparently it doesn't it needs a base rom.....I'm at work at the moment so i cannot fix my phone(i flashed it while at work which i shouldn't have done...) i noticed you can put it into fast boot in recovery - go to reboot options then fast boot can you see if that works
arc_u said:
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
unrealboot1 said:
I have the same problem too... I was hoping it would just work, but apparently it doesn't it needs a base rom.....I'm at work at the moment so i cannot fix my phone(i flashed it while at work which i shouldn't have done...) i noticed you can put it into fast boot in recovery - go to reboot options then fast boot can you see if that works
Click to expand...
Click to collapse
Hi thanks for your reply. I've tried going to fastboot
from recovery and I get a blue flashing light for one flash then it boots up again. Am I able to do anything at that point?
Glad I'm not the only stupid one on here
im not the expert here but I have bricked other phones before but never an xperia phone before. I have been reading up, the doom kernel has some mounting options, try to mount the sd card as mass storage so pc can send files accross to the phone. It should be mount and storage menu -> mount usb storage, then leave it on that menu and connect to computer, see if that works
unrealboot1 said:
im not the expert here but I have bricked other phones before but never an experia phone before. I have been reading up, the doom kernel has some mounting options, try to mount the sd card as mass storage so pc can send files accross to the phone.
Click to expand...
Click to collapse
Hi is this by the mount USB storage optuon ? I tried that and it wasn't detected on the PC. I could try another PC later. Recovery went into mount mode fine but nothing happened on the PC. Not even a blank drive which I know some people have had
If it blinks the LED for a second and reboots, that means that you don't have the drivers. Install drivers that are bundled with flashtool and try again. Or use Linux / OSX.
K900 said:
If it blinks the LED for a second and reboots, that means that you don't have the drivers. Install drivers that are bundled with flashtool and try again. Or use Linux / OSX.
Click to expand...
Click to collapse
I've used the laptop I'm trying it on for unlocking the boot loader and rooting. Maybe something corrupted the drivers. Will try on my Linux machine when I get home.
Thank you for all the help so far
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
doesn't work...after the 3 beeps i let go and the screen turns black but then the boot loop happens again, i cant turn the phone off
Androxyde said:
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
Click to expand...
Click to collapse
Hi, I do get the 3 vibrates and the phone stays off but instill got the individual quick flash then boot up.
Apologies mine stays off too, i just had it on charger so it turns on again after the 3 beeps, once off the charger it will turn off....I will be trying stuff when i get home.
Androxyde said:
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
Click to expand...
Click to collapse
This will work, cause I had a similar issue a while ago
Good luck
depulle87 said:
This will work, cause I had a similar issue a while ago
Good luck
Click to expand...
Click to collapse
correct
Hello. I've got familiar problem. My phone blacked out after one day having about 35 % battery full. I was trying to reset it by holding power and volume up buttons - nothing happened. Just once showed up Sony logo but then again black nothing. Then it vibrate 3 times quickly and from that time it is shutted down, won't turn on even in flashmode. LED is not working too. I was asking for advice in local store servise and guy told me, that new phones have to be at least 30 min on the charger. So it's here now for hour, no result. :/
Just fixed this issue.
Follow these steps
1.hold vol up + power until phone vibrates 3 times.
2.open flash tool and point towards your stock file.
3.hit okay
4.wait for flash tool to prepare the files then it will prompt you to connect device in flash mode( vol down + power)
5.wait for it to finish. Unplug reboot and there you go fixed...
Hope this helps
Sent from my LT26i using Tapatalk 2
Cant do that, because PC dont recognize the phone. Phone has just red LED, thats all.
Alikalix said:
Cant do that, because PC dont recognize the phone. Phone has just red LED, thats all.
Click to expand...
Click to collapse
Use the bundled wallcharger!!! not a PC, pc has too less power to charge it now!
After wallcharger is placed hold vol+ and power for a few seconds until 3 vibrations, then let the phone on charger for atleast 2 hours, if all is good phone will bootup to the "charging animation"
Regards
Bin4ry said:
Use the bundled wallcharger!!! not a PC, pc has too less power to charge it now!
After wallcharger is placed hold vol+ and power for a few seconds until 3 vibrations, then let the phone on charger for atleast 2 hours, if all is good phone will bootup to the "charging animation"
Regards
Click to expand...
Click to collapse
Something similar happened to me. I have the bugged version of chargemon (only can charge with phone on) and accidentally discharged completely. The phone didn't boot, didn't charge and didn't do the 3 vibrations thing. So I put the battery off, conected the wall charger, putted the battery and it booted
It's really easy to remove the battery, you just need to be careful
Hi all,
after successfully unlocking the bootloader and flashing CyanogenMod 10.1.0 RC2 boot.img via fastboot from Linux, I couldn't manage to boot the tablet again.
I tried several things (Emma, Flashtool, etc.) in order to relock the bootloader and/or flash a stock ROM, but I only could put the device into fastboot mode.
Things are getting possibly worse now: the red notification light is still, I can't neither reboot (pressing Power+VolumeUp for 5 seconds) nor halt (Power+VolumeUp for 10 seconds)...
What a mess! Anyone can suggest me how to fix this situation, please?
Alberto
This is why u shouldn't mess with your tablet.just use it as it came, not worth the hassle
bibe74 said:
Hi all,
after successfully unlocking the bootloader and flashing CyanogenMod 10.1.0 RC2 boot.img via fastboot from Linux, I couldn't manage to boot the tablet again.
I tried several things (Emma, Flashtool, etc.) in order to relock the bootloader and/or flash a stock ROM, but I only could put the device into fastboot mode.
Things are getting possibly worse now: the red notification light is still, I can't neither reboot (pressing Power+VolumeUp for 5 seconds) nor halt (Power+VolumeUp for 10 seconds)...
What a mess! Anyone can suggest me how to fix this situation, please?
Alberto
Click to expand...
Click to collapse
ash6783 said:
This is why u shouldn't mess with your tablet.just use it as it came, not worth the hassle
Click to expand...
Click to collapse
This answer is about as helpful as a heart attack lol
I can assure you that even us dev's run into issues like this, I soft bricked my new tab 5 times today (still trying to figure out this recovery/no recovery thing sony is doing lol).
Aberto, I had/did the exact thing today, first off I'm guessing you have a wifi only like I do right? Those roms/boot imgs won;t work it seems, Im learning as fast as I can so I can get a port for Baked for this tab, I own the wifi only so its my first priority.
Here's what I did, took allot of patience, so be prepared to try a bunch of times!
1. Unplug the usb cable
2. hold both vol + and - (I know this is not documented but stick with me here), then press and hold the power button until the led flashed "white" "3 times" (u will see one white flash, then after about another 20 seconds a second set of white flashes will begin, it will blink 3 times)
3. Plug in the usb cable
4. Make sure you have emma/drivers setup, since this is a windows only (boo!) tool you should here the usb device plug notifiction that it detected the "S1 Service Sony Mobile Communications AB"
This only lasts about 1 minute before it will go back to red led, launch emma and restore a stock image from sony, after its done, unplug the device, and hold power, it should come back to life!
Thanks nycbjr, I tried this morning before getting to work and I could "unlock" the red notification light.
This evening I'll try to get further in the process of resuscitating my tablet.
Thanks for the tips!
Alberto
nycbjr said:
Alberto, I had/did the exact thing today, first off I'm guessing you have a wifi only like I do right? Those roms/boot imgs won;t work it seems, Im learning as fast as I can so I can get a port for Baked for this tab, I own the wifi only so its my first priority.
Click to expand...
Click to collapse
Yep, I have a SGP312 (wifi only, 32 GB)
nycbjr said:
This answer is about as helpful as a heart attack lol
I can assure you that even us dev's run into issues like this, I soft bricked my new tab 5 times today (still trying to figure out this recovery/no recovery thing sony is doing lol).
Aberto, I had/did the exact thing today, first off I'm guessing you have a wifi only like I do right? Those roms/boot imgs won;t work it seems, Im learning as fast as I can so I can get a port for Baked for this tab, I own the wifi only so its my first priority.
Here's what I did, took allot of patience, so be prepared to try a bunch of times!
1. Unplug the usb cable
2. hold both vol + and - (I know this is not documented but stick with me here), then press and hold the power button until the led flashed "white" "3 times" (u will see one white flash, then after about another 20 seconds a second set of white flashes will begin, it will blink 3 times)
3. Plug in the usb cable
4. Make sure you have emma/drivers setup, since this is a windows only (boo!) tool you should here the usb device plug notifiction that it detected the "S1 Service Sony Mobile Communications AB"
This only lasts about 1 minute before it will go back to red led, launch emma and restore a stock image from sony, after its done, unplug the device, and hold power, it should come back to life!
Click to expand...
Click to collapse
Thanks! I just saved my Tablet Z's life by your method!
It seems like no kernel I can flash now (SGP312 32GB WiFi) I flashed CWM-Based Recovery 6.0.3.2 twice, and m SGP312 died twice
yt92 said:
Thanks! I just saved my Tablet Z's life by your method!
It seems like no kernel I can flash now (SGP312 32GB WiFi) I flashed CWM-Based Recovery 6.0.3.2 twice, and m SGP312 died twice
Click to expand...
Click to collapse
you are welcome! Im working with doomlord on getting recovery working foir the sgp311/12..
btw baked blackbean 9 is booting on the z tab.. few days I'll release it
nycbjr said:
... after its done, unplug the device, and hold power, it should come back to life!
Click to expand...
Click to collapse
You saved my tablet's life too! I could manage to restore Sony's factory ROM, and finally I can use it!
Thanks again nycbjr!
hmz
Glad I found this topic, but so far I can't get it to work.
Situation is the same I guess, red light, tried to flash the wrong img to my wifi only modell.
When I press all 3 buttons at the same time, the first white blink shows up after about 5secs, then there is a 3 blink sequence also in white after another 3-5secs. If I plugin the usb cable still holding down the buttons, no usb device is recognized, nothing happens..
If I keep holding down the buttons a 3 white blink sequence shows up again, followed by a white/red quick blink, then after 5 secs another 3 white blink sequence starts again, followed by a white7red combo et cetera. As soon as I release the buttons it turns to a constant red again.
Any more ideas or should I just keep trying?
defy0815 said:
Glad I found this topic, but so far I can't get it to work.
Situation is the same I guess, red light, tried to flash the wrong img to my wifi only modell.
When I press all 3 buttons at the same time, the first white blink shows up after about 5secs, then there is a 3 blink sequence also in white after another 3-5secs. If I plugin the usb cable still holding down the buttons, no usb device is recognized, nothing happens..
If I keep holding down the buttons a 3 white blink sequence shows up again, followed by a white/red quick blink, then after 5 secs another 3 white blink sequence starts again, followed by a white7red combo et cetera. As soon as I release the buttons it turns to a constant red again.
Any more ideas or should I just keep trying?
Click to expand...
Click to collapse
Normally it is the follows:
Hold Vol+ and Power.
1x blink = Reboot (doesn't help you in this case)
after holding it longer
3x blink = Shut down (device is switched off and in a defined state)
Drink a beer
open flash-tool and prepare the firmware to flash
Hold Vol- and plug the device to the computer
If the led turns green the firmware will flash
If not check what the flash-tool says in which state the device is
If the led turns red maybe the battery is to empty?!?
I don't know about the red led, but thanks for the hint.
Pressing only vol down when pluggin in the usb seems to have changed something. I tried power+vol down before but that didn't help.
Now flashtool seems to be working, it says it's flashing, but it seems to take ages. I'll let it keep on working for now (running since 10mins, but after "checking header" and "flashing data" there is no progress anymore...yet). I'll report back
I canceled it after 2h with no progress...damnit.
Does anyone have another suggestion?
defy0815 said:
I canceled it after 2h with no progress...damnit.
Does anyone have another suggestion?
Click to expand...
Click to collapse
With Flashtool it didn't work, but with EMMA it works! YES!
Thanks!
This also saved my tablet's life.
defy0815 said:
I canceled it after 2h with no progress...damnit.
Does anyone have another suggestion?
Click to expand...
Click to collapse
Hi, try flashing again with Emma but use a different USB cable i had a similar issue where the flash started then seemed to freeze so tried a different cable and it worked.
Edit: lol seems i missed your post where you tried again with Emma -_- glad you got it sorted though
UserX10 said:
Normally it is the follows:
Hold Vol+ and Power.
1x blink = Reboot (doesn't help you in this case)
after holding it longer
3x blink = Shut down (device is switched off and in a defined state)
Drink a beer
open flash-tool and prepare the firmware to flash
Hold Vol- and plug the device to the computer
If the led turns green the firmware will flash
If not check what the flash-tool says in which state the device is
If the led turns red maybe the battery is to empty?!?
Click to expand...
Click to collapse
you need a big kiss from someone thanks a million :good::good::good::good::good::good::good:
This worked for me, albeit after trying the first part (holding VOL+, VOL- & POWER) intermittently for 2 days.
What seemed to get the table/battery to reset was I connected the USB cable to the charger on a wall outlet on the second day. When I plugged in the cable the Red LED came on and stayed there. After an hour it was still red so I removed the cable and tried 1) pressing VOL+ & POWER (about 3 seconds), then 2) VOL- & POWER (about 3 seconds) and after a while the red LED went off.
Then I tried the VOL+, VOL- & POWER and it started blinking white once, then white again after a while, and I was able to continue with the instructions.
Thanks!
Hello, guys
I upgraded my z2 from 5.1.1 to MM. It's existenz v1.0.0. It worked good. I wanted to downgrade to Lollipop 5.1.1 . I entered TWRP and restored the ROM that I saved before. I press "reboot system" and then It totally backed out. It can not turn on. I pressed power + volume up, it didn't vibrate. I tried, tried... many times but it didn't work. I use the flashtool to downgrade. When I pluged the cable and pressed volume down. The red light just flashed, flashed and flashed and nothing happened. What is that problem. Can I save my phone anymore. Plz help.
Sudden death.
con_cop said:
Hello, guys
I upgraded my z2 from 5.1.1 to MM. It's existenz v1.0.0. It worked good. I wanted to downgrade to Lollipop 5.1.1 . I entered TWRP and restored the ROM that I saved before. I press "reboot system" and then It totally backed out. It can not turn on. I pressed power + volume up, it didn't vibrate. I tried, tried... many times but it didn't work. I use the flashtool to downgrade. When I pluged the cable and pressed volume down. The red light just flashed, flashed and flashed and nothing happened. What is that problem. Can I save my phone anymore. Plz help.
Click to expand...
Click to collapse
Have you tried pushing the red button for 5 seconds under the microusb cover flap to completely reset the system?
Does the device get recognised in the DeviceManager, if so have you installed the correct developer.sonymobile[com]/downloads/drivers/xperia-z2-driver/ drivers for it? (you could also try it on ubuntu)
Are you sure your connection / cable is good?
Have you tried to boot into theandroidsoul[com]/sony-xperia-z2-flash-mode-54084 flashmode? (volume down), does it get recognised then?
desireholic said:
Have you tried pushing the red button for 5 seconds under the microusb cover flap to completely reset the system?
Does the device get recognised in the DeviceManager, if so have you installed the correct developer.sonymobile[com]/downloads/drivers/xperia-z2-driver/ drivers for it? (you could also try it on ubuntu)
Are you sure your connection / cable is good?
Have you tried to boot into theandroidsoul[com]/sony-xperia-z2-flash-mode-54084 flashmode? (volume down), does it get recognised then?
Click to expand...
Click to collapse
I tried the ways you showed me. Sadly, it didn't work. The cable I use is OEM. I connected it in flashmode to flash. It didn't recognize. The red light of the phone kept flashing. Maybe, my phone is completely dead. Thank you for helping me.
con_cop said:
I tried the ways you showed me. Sadly, it didn't work. The cable I use is OEM. I connected it in flashmode to flash. It didn't recognize. The red light of the phone kept flashing. Maybe, my phone is completely dead. Thank you for helping me.
Click to expand...
Click to collapse
Ah, this doesn't sound too good. The good thing is that the flashtool works, but since it doesn't help you may try a method called "test point". But if you decide to do it, be very careful not to touch anything else with the paper clip (if you touch the small component with the metal surface there will be sparks coming out).
Sent from my Redmi Note 3 using XDA-Developers mobile app
have you tried to put your phone on charge?
sounds to me that the battery level is too low.
are you on LB or UB??
michel090428 said:
have you tried to put your phone on charge?
sounds to me that the battery level is too low.
are you on LB or UB??
Click to expand...
Click to collapse
My phone is LB. The battery was about 60% plus at the time of restoring the LP Rom. I pluged it in to charge, but the red light kept flashing.
Was charging the phone when I went to sleep. Woke up to the Boot Logo, the one with "HUAWEI Powered by Android". Tried to restart it by pressing the power button for a while, doesn't work. Immediately went back to this screen. Tried:
power+volume up, doesn't work.
power+volume down, doesn't work.
power+volume down while connected to computer, opened fastboot&recovery. HiSuite says my phone isn't supported.
power+volume up while connected to computer, doesn't work.
draining the power. When I charged it, the charging symbol appeared (lightning inside a circle, coloured red) for a bit, then the Boot Logo appeared again and stays on for quite a while, even when I immediately disconnected the cable.
I found a similar thread, but without enough data to tell it's the same problem, and it's been 2 years ( https://forum.xda-developers.com/t/p20-lite-stuck-on-startup-screen.3946110/ )
I just want to know if there's another way to enter the eRecovery mode, since I need the data and my last backup was on the 1st of April. Even better if I can boot into the phone, but I'm not holding my breath. Any help would be appreciated. Thank you.
BlackPond said:
if there's another way to enter the eRecovery mode
Click to expand...
Click to collapse
BlackPond said:
power+volume up while connected to computer, doesn't work
Click to expand...
Click to collapse
Nope, afaik.
BlackPond said:
I need the data
Click to expand...
Click to collapse
No chance, sorry...
Most likely your emmc memory died, (known issue on Kirin 659 devices).
Hi there friends I think I have managed to brick my so far but this lovely Xperia.
After testing flashing a lineage recovery to then install magisk which was fine I read about the SEA firmware unlocking VoLTE so I flashed that one with newflasher and it ran fine (although didn't unlock 4G) but then I decided to install magisk again and flashed the lineage recovery to boot_b (which was the active slot) and rebooted into recovery and my device does not come back. It is off and if I connect it the notification light just blinks red slowly. It does not appear in lsusb and I have tried holding vol up + power, vol down + power, vol up + vol down + power, for up to 30 seconds, it just won't come back to life
anybody else run into this and how did you revive it? Hope someone can help me
video of what it does when I connect:
(I'm trying with volume up here)
tomatoketchup said:
Hi there friends I think I have managed to brick my so far but this lovely Xperia.
After testing flashing a lineage recovery to then install magisk which was fine I read about the SEA firmware unlocking VoLTE so I flashed that one with newflasher and it ran fine (although didn't unlock 4G) but then I decided to install magisk again and flashed the lineage recovery to boot_b (which was the active slot) and rebooted into recovery and my device does not come back. It is off and if I connect it the notification light just blinks red slowly. It does not appear in lsusb and I have tried holding vol up + power, vol down + power, vol up + vol down + power, for up to 30 seconds, it just won't come back to life
anybody else run into this and how did you revive it? Hope someone can help me
video of what it does when I connect:
(I'm trying with volume up here)
Click to expand...
Click to collapse
Have you tried using xperia companion?
Mangtas_666 said:
Have you tried using xperia companion?
Click to expand...
Click to collapse
yeah it keeps waiting for the device. it never connects. tried multiple cables
Use bewflasher and just hold the vol down. And you should see a green led light and you're good to go
bountyman334 said:
Use bewflasher and just hold the vol down. And you should see a green led light and you're good to go
Click to expand...
Click to collapse
nope the green light is not coming up. it was previously, that's how I flashed the SEA firmware. it only blinks red and it doesn't establish an USB connection
tomatoketchup said:
nope the green light is not coming up. it was previously, that's how I flashed the SEA firmware. it only blinks red and it doesn't establish an USB connection
Click to expand...
Click to collapse
Keep it under charge a lot. Happened to me and it was at low level of charge, and it needed 4 hour to show again a light different from red. I never ever again start something under 90% charge.
Also don't charge connected to PC, it was too slow and from that state maybe you need 20 hours XD
Evil_Sephiroth said:
Keep it under charge a lot. Happened to me and it was at low level of charge, and it needed 4 hour to show again a light different from red. I never ever again start something under 90% charge.
Also don't charge connected to PC, it was too slow and from that state maybe you need 20 hours XD
Click to expand...
Click to collapse
I charged it overnight with its wall charger and it didn't snap out of it
tomatoketchup said:
I charged it overnight with its wall charger and it didn't snap out of it
Click to expand...
Click to collapse
I feel sorry for you brother...such a nice device...OK let's talk what happened, the state now your device is in is called hardbrick and it had a corrupted bootloader or no boot loader, but your device is still alive, in your PC in device manager it lists as Qs USB mode with some number after it like qsusb9008...now this device can only be brought to life with the help of a blankflash file which can flash your boot loader in snapdragon service mode...actually no snapdragon can be hardbricked permanently now you need appropriate blankflash file for your device.. Please don't open the device if some repairmen suggests to do JTAG nothing is necessary all you need is blankflash file which is shared to only Sony testers groups.... Who tests ROMs before release and they hardbrick so they share those files to them.... Please don't loose hope....it takes time but certainly it can be bought back to life... And dont try any flashing utility as there is no functional boot loader on it now and nothing will work...Sony won't provide that for sure and they will say then can only solve by mother board replacement ,don't believe therm your device is perfect it only needs blankflash file as it entered into final safe mode... I ain't regular on XDA if you need any info contact me via my mail [email protected] g ma I'll .com
Any updates on this? I'm having the same issue and looking for help from the community!
tomatoketchup said:
Hi there friends I think I have managed to brick my so far but this lovely Xperia.
After testing flashing a lineage recovery to then install magisk which was fine I read about the SEA firmware unlocking VoLTE so I flashed that one with newflasher and it ran fine (although didn't unlock 4G) but then I decided to install magisk again and flashed the lineage recovery to boot_b (which was the active slot) and rebooted into recovery and my device does not come back. It is off and if I connect it the notification light just blinks red slowly. It does not appear in lsusb and I have tried holding vol up + power, vol down + power, vol up + vol down + power, for up to 30 seconds, it just won't come back to life
anybody else run into this and how did you revive it? Hope someone can help me
video of what it does when I connect:
(I'm trying with volume up here)
Click to expand...
Click to collapse
smmate3 said:
Any updates on this? I'm having the same issue and looking for help from the community!
Click to expand...
Click to collapse
I bought an Xperia 1 IV.