I received new update yesterday on my Umidigi Z Pro 3.01_20170408
Would anyone have more information on this update?
Since the update, I have problems with the rotation of the applications: it switches to landscape mode and don't return to the initial state.
netokee said:
I received new update yesterday on my Umidigi Z Pro 3.1.0.20170408
Would anyone have more information on this update?
Since the update, I have problems with the rotation of the applications: it switches to landscape mode and don't return to the initial state.
Click to expand...
Click to collapse
Post link if u have zip
Sent from my Z Pro using Tapatalk
netokee said:
I received new update yesterday on my Umidigi Z Pro 3.01_20170408
Would anyone have more information on this update?
Since the update, I have problems with the rotation of the applications: it switches to landscape mode and don't return to the initial state.
Click to expand...
Click to collapse
For the problem, this solution correct it:
1) open call dialer and type in *#*#3646633#*#*
2) You will be transferred to engineering mode - hardware testing - sensors - sensors calibration
3) clear calibration
All ROM zips can be had here http://community.umidigi.com/forum-150-1.html
Related
Hi,
After performing the JB update - does anyone else have the trackpad not working? I did not receaved a second firmware (dock) update (as others reported).
Is there a manual update file about - i can't locate one if there is ...
Any pointers ...?
With thanks
pooblej said:
Hi,
After performing the JB update - does anyone else have the trackpad not working? I did not receaved a second firmware (dock) update (as others reported).
Is there a manual update file about - i can't locate one if there is ...
Any pointers ...?
With thanks
Click to expand...
Click to collapse
FIXED - the key above the "3" key on the dock will enable/disable the trackpad - woops!
Hi!
I've updated my XPERIA P up to JB. The NFC module doesn't work properly. I can't transfer to another XPERIA P (ICS) photos, but can tranfer only contact from adress book or Youtube link. Also my phone have no reaction for XPERIA Smart tags which comes in package with phone.
I've founded more 3 guys with same problem after update to JB.
Does anybody know solution?
P.S. NFC worked properly only in Android 4.0.4 (6.1.1.B.1.54), in Android 4.0.4 (6.1.B.0.544) and in stock firmware (Android 2.3) NFC didn't work too.
Sergey-Aka said:
Hi!
I've updated my XPERIA P up to JB. The NFC module doesn't work properly. I can't transfer to another XPERIA P (ICS) photos, but can tranfer only contact from adress book or Youtube link. Also my phone have no reaction for XPERIA Smart tags which comes in package with phone.
I've founded more 3 guys with same problem after update to JB.
Does anybody know solution?
P.S. NFC worked properly only in Android 4.0.4 (6.1.1.B.1.54), in Android 4.0.4 (6.1.B.0.544) and in stock firmware (Android 2.3) NFC didn't work too.
Click to expand...
Click to collapse
Probably a kernel issue. Wait a few days and you'll see someone coming up with a better kernel which supports all these
Sent from my Nexus 10 using Tapatalk HD
zombiegenerator said:
Probably a kernel issue. Wait a few days and you'll see someone coming up with a better kernel which supports all these
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
This issue is observed both on stock kernel in JB and in Sliding XP Kernel v8.1.1. About other kernel I don't have information.
I dunno, I find it interesting but after flashing Nemsis Kernel on my Xperia P (on stock JB), the NFC works well now (at sending any files). perhaps you can try that ?
thehavoc said:
I dunno, I find it interesting but after flashing Nemsis Kernel on my Xperia P (on stock JB), the NFC works well now (at sending any files). perhaps you can try that ?
Click to expand...
Click to collapse
I heard about this kernel... Can you share with link? Maybe I'll try it
P.S. 2 guys have wrote that NFC works if SIM card is removed .... I've cheked it out. Yes... NFC works with Smart tags when the phone is without SIM, but I still can't transfer photos.
It seems there are many users who have issue in NFC modul:
http://forum.xda-developers.com/showthread.php?t=2240323
http://forum.xda-developers.com/showthread.php?t=1871759
http://forum.xda-developers.com/showthread.php?t=1762077
http://talk.sonymobile.com/thread/127805
http://talk.sonymobile.com/thread/125434
http://talk.sonymobile.com/thread/123885
I'm losing hope to find solution...
I just bought an xperia P LT22i yesterday and it could detect smart tags just fine. Then I updated to Android 4.1.2 (6.2.A.0.400) (don't know exactly what changed) and it completely ignored my tags. Would never detect them.
I tried to update that smart connect app andit didn't change anything.
Than I reseted my phone to factory settings. It didn't downgrade the system, but the smarttags app was gone and the smart connect app (wich has been downgraded) started to detect the tags 100% and treat them as "events". When I touch a tag it starts an event and if I touch the same tag again the event ends. And smarttag app is useless.
I know nothing about file transfers, never tried them.
I've got some news
I've did it, I've transferred files via NFC.
1. Reset setting to factory defaults.
2. The Smart Connect app updated from market.
3. Took the second Xperia P and tried to transferred files, but got fail. Then I noticed that bluetooth didn't start on the second Xperia P to provide recieving/transfering files. I switched on bluetooth and then NFC on the second Xperia P.
4. The phones must be placed relative to each other in spacial way. It seems that NFC in Jelly Beam has very low power of radiation.
5. File transfer has started
6. BUT the phone still can't find NFC Smart tags...
There is some advice to make NFC tag works with Xperia P JB (in Russian) http://vk.com/topic-35919535_28235141?offset=0
1. Run Smart Connect app
2. Enter into search new device menu
3. Start search and put the tag close to NFC module
4. Smart Connect app must detect the tag
5. Now your phone will recognize this tag and you can add some action into Smart Connect app.
For some users this instruction works fine, but not for me unfortunatly.... Maybe you'll be lucky!
Sergey-Aka said:
Hi!
I've updated my XPERIA P up to JB. The NFC module doesn't work properly. I can't transfer to another XPERIA P (ICS) photos, but can tranfer only contact from adress book or Youtube link. Also my phone have no reaction for XPERIA Smart tags which comes in package with phone.
I've founded more 3 guys with same problem after update to JB.
Does anybody know solution?
Click to expand...
Click to collapse
I found a way NFC modules perfectly working on JB ROM.
Only flashing the Baseband of 6.1.1.B.1.75firmwares via Flashtool
6.2.А.1.100 firmware have resolved my issue with NFC. :good:
My amazfit verge can not use compass which will show calibrating all the time(although I turn my wrist to roll the ball 1 round). It used to be working for 5 days after I bought it. I try to do somethings such as
- Restart it : It is still not working.
- Factory reset : It is still not working.
- Install new ROM from 3.2.13 to 3.0.18.0 ROM v0.5 Installer Multilanguage (2019/02/12) by using stock gps : It is still not working.
Please recommend me to solve compass problem to be working again.
For your infomation
- Amazfit verge model no. A1811 (English version)
- Running on Verge 3.0.18.0 ROM v0.5 Installer Multilanguage (2019/02/12)
Kan's kanda said:
My amazfit verge can not use compass which will show calibrating all the time(although I turn my wrist to roll the ball 1 round). It used to be working for 5 days after I bought it. I try to do somethings such as
- Restart it : It is still not working.
- Factory reset : It is still not working.
- Install new ROM from 3.2.13 to 3.0.18.0 ROM v0.5 Installer Multilanguage (2019/02/12) by using stock gps : It is still not working.
Please recommend me to solve compass problem to be working again.
For your infomation
- Amazfit verge model no. A1811 (English version)
- Running on Verge 3.0.18.0 ROM v0.5 Installer Multilanguage (2019/02/12)
Click to expand...
Click to collapse
Water damaged or hardware failure maybe?
Saratoga79 said:
Water damaged or hardware failure maybe?
Click to expand...
Click to collapse
Can I restore to original rom and lock bootloader to claim warranty ?
New donor !!!
Status: Open beta
Source: TELEGRAM
Based on: Oxygen OS 10.3.1
Android Version: 10 (sdk29)
Firmware Version: 10.3.1 Stable (OnePlus Classification
Status: GSI Port
Build author: HARDGEYNER
Many thanks to comrade NeFeroN and Amog787
Bugs:
- FOD (all custom applications see the scanner and fingerprint, but there is no native application)
- NFC
- Other minor as on oOS (something like offline charging)
Build 10.02.20
- PopUp fix
-FaceUnlock fix
10.3.1. 03022020 List of changes
- Converted the GSI image from the official 10.3.1 from 6t;
- Ported GSI for our smartphone;
- Finalization of the vendor according to the new assembly;
- Fix brightness;
- Fix auto brightness;
- Fix Wi-Fi (thanks Amog787);
- Cleaning the system from treble junk;
- Cleaning system from OnePlus junk;
- Fix topics from 1+;
- Made a separate application with camera fixes and unlocks (changed apk graphics);
- I screwed the lines flashing along the edges of the screen upon notification;
- Additional firmware translation;
- Screwed OTA update (gave a server for storing firmware. Download speed by air is now excellent);
- Added a section in the OTA application with the necessary applications, such as cores, root, VPN and cameras;
- Added original applications (because in the conversion process, this is all deleted);
- Fixed a bug that appears after a reboot;
- Preferably set the camera to GCAM
- Other changes that can no longer be remembered.
Subsequent updates will arrive by OTA
Updates, Installation Information, Fixes MOD EDIT: Telegram link removed, please read the STICKY!
Download: https://drive.google.com/file/d/1eD-OdJ-1eh5EiBcGaSrQjDw8U8VRjKn6/view
This is great. Does FOD not working mean that it's not working on the lock screen or in like apps that use the biometric api?
MartonDev said:
This is great. Does FOD not working mean that it's not working on the lock screen or in like apps that use the biometric api?
Click to expand...
Click to collapse
We are now solving the problem of imprint. Programs see the scanner and it works, but we cannot authorize the fingerprint through the native application. Come into the group, I have a logcat there.
O_dinochka said:
We are now solving the problem of imprint. Programs see the scanner and it works, but we cannot authorize the fingerprint through the native application. Come into the group, I have a logcat there.
Click to expand...
Click to collapse
Ah thank you very much. I already joined to the telegram
Great work dev...really [email protected] O_dinochka
leosinfinity said:
Great work dev...really thn[email protected] O_dinochka
Click to expand...
Click to collapse
thanks bro
This rom is nearly perfect. Thanks to the devs
Great rom, smooth af
however i couldn't install k20 pro motor apk to bring the front camera down
it says: App not installed.
Thank you , is a really good rom ?
best port rom i've seen, thank you so much!
lilshiny said:
best port rom i've seen, thank you so much!
Click to expand...
Click to collapse
Thx!
qrah666 said:
Great rom, smooth af
however i couldn't install k20 pro motor apk to bring the front camera down
it says: App not installed.
Click to expand...
Click to collapse
This application is already embedded in the system! Search in settings
elnarutocomy said:
Thank you , is a really good rom
Click to expand...
Click to collapse
Thanks!
can i use this as a daily driver ? i can use pattern instead for FOD and my k20 pro is indian variant so it doesn't have NFC . but this is my only device . Thank you for bringing OOS to k20 pro O_dinochka
Yes, you can use it daily
Today will be an update! Automated front camera
wow!!! thats great.
really glad to see..Oxygen OS getting stable ..more and more...!!!:highfive:
O_dinochka said:
Today will be an update! Automated front camera
Click to expand...
Click to collapse
I will flash it when this update is avaible
Hello I am currently running the Xiaomi EU Rom and am looking for instructions on how to install this Rom, could someone please provide them here.:angel:
Hello to all users here in this forum I have Samsung S21 SM-G991B all was good with the phone I was on Firmware - G991BXXU3AUF6 and work great with no problem after I update the phone to New Firmware - G991BXXU6EWAF I have a problem with the camera is stopped working is write a message Camera Failed I go to the test menu that I can check itch camera separately and the camera work and all good I install different camera app from the google play store and all work now I try to update the phone to a new Firmware and the same issue so maybe someone here have this problem or new Firmware that fix is issue with is phone tanks for all help
If other camera apps are working, just clear data of Samsung camera.