I have the global version of the S6 Edge, and something strange is happening. I'm wondering if this means I need a new LCD / Digitizer replacement.
A couple months ago my phone stopped responding to touch completely. I put it down and used another device for a while. Took it up one day, charged it up, and the touch started working fine for a couple more months.... Until it stopped again. IDK what else to try. I've wiped the cache, did the master reset, hard reset.... Now it's sitting at the setup screen, not registering a touch anywhere.
Does anybody have any ideas??? I've spent the entire day resetting the phone to no avail. I'm also running stock software. Never rooted.
Thanks
mattydk said:
I have the global version of the S6 Edge, and something strange is happening. I'm wondering if this means I need a new LCD / Digitizer replacement.
A couple months ago my phone stopped responding to touch completely. I put it down and used another device for a while. Took it up one day, charged it up, and the touch started working fine for a couple more months.... Until it stopped again. IDK what else to try. I've wiped the cache, did the master reset, hard reset.... Now it's sitting at the setup screen, not registering a touch anywhere.
Does anybody have any ideas??? I've spent the entire day resetting the phone to no avail. I'm also running stock software. Never rooted.
Thanks
Click to expand...
Click to collapse
Hello . You can try to open the back panel and put it to rice.. maybe humidity cause this..
Related
Hi,
My XdaII was running 1.50h for some time without any problems, then last week it did a hard reset for no reason and so I thought I would look at the newer versions of the OS. I tried 1.60b and then ran the DOC procedure. Everything looked good. After installing a few programs it started to do a hard reset at least once a day. Then it started dying completely, when this happened the device would not restart at all. I tried leaving it for a while and noticed it getting pretty hot. The only way to breath life back into it was to take the battery out for a couple of hours. I read something in the forums here about SPB Pocket plus3 version causing problems, I also had the problem others had with notes not syncing so I decided to try ver 1.60a and upgraded pocketplus. This has been running for a couple of days now without problems.
Since the post above I started installing more software and after a while it just locked up again, as if it had died. I tried soft reset - nothing, Hard reset - nothing. The device then started to get warm and so I took out the battery and it hard reset.
I have the following applications installed.
spb pocketplus 3 new version - trial
Transcreative magic button
Flash player active X
betaplayer
calendar +
Codewallet PRO 5
The device had been ok for two days with just spb pocket plus installed.
Any ideas? I am worried about it getting hot
Thanks,
Tony.
my xdaII have broken housing.trying to fix it just a little (but no luck,must find housing now).I have sometime similar problem,completly dead and warming.problem was from display connector(caused by opening).if this was not very good connected,xdaII sometimes work sometimes dead and warm-up.now with flex firmly connected works fine.
Thanks gabiz_ro. I might get it opened up and checked out. I have a feeling the probelm is HW.
Tony.
I noticed earlier today my phone kept freezing.
the phone HAS been freezing on me recently, at least once an hour
but now every 3 minutes it freezes or resets itself. I have missed a LOT of calls and ttext messages etc.
today has been a disaster. i havent even synced my numbers and contacts. what should I do?
if you haven't installed anything new or tweaked just before the problem started:
as usual - backup and hard reset...
There is a free program called "pim backup" that will backup all your contacts, messages and call log. Then you can do a hard reset.
my phone freezes before I can even back up anything. its the worst
now it seems like if my phone is plugged in and charging, it gives no problem, but as soon as I unplug it, frozen.
im going to try to find PIM backup to see what that can do
wow now I have a bigger problem now. my phone fell and the transcriber cracked so only part of the screen works with touch BUT that was before I hard reset the phone and now the screen align is appearing but I cant touch all of the targets
is there a way to bypass this?
When its at the align screen you can plug it into computer and connect with active sync. Delete the Welcome shortcut from Windows/startup and soft reset. That should skip the alignment. Sorry to hear about the phone. I have a couple moguls if interested PM me about it.
I am having the same issue he was before he cracked his screen up.
I get freezing whenever the phone goes into standby and it will only restart with 2 hits of the reset button. Also it is a coinflip as to whether it will actually start up fully or just keep soft reseting for an extended period without ever loading up fully.
Anyone have any incite or ideas. I am running a ppckitchen vs of windows mobile 6.5 now. It is a kitchen version with few added programs. However I also experienced something similar to this issue with Titan Reloaded 1.3.4 as well but it stopped so I never bothered looking into it. Now this problem occurs about 10-15 times per day and it is frustrating. I am out of warranty and cant send my phone in because I replaced the housing myself.
Thanks
Dave
Also, I have US Cellular if you need to know that.
Thanks
Dave
I had the same problem kind of. Out of nowhere mine would lockup or freeze randomly. Usually after being in my pocket, after hitting all the buttons or squeezing it, it would work again (sometimes but usually after numerou reboots) but then lockup shortly after or flipping the case open and closed. Finally took the case off my phone and blew inside it today put it back together and havent had a lock up all day (1st time since i started havin the problem). It wasnt rom related as i had the same rom for a while, tried reflashing to different kinds of roms and radios but same random lockups. Somethin musta been loose
Well, I went to take my phone apart, probably the 8th or 9th time that I've done it and I ended up ripping the cable for the screen right off. So no more HTC for me for awhile. Unless of coarse someone wants to mail me a cable for free (im broke in college and my rent is due soon.) By judging by how easily the cable ripped I would bet the crease I found right by the rip had already had a slight tear in it.
Thanks for your help.
Dave
Hi,
I've just joined after getting linked to this site. Seems like a huge site with plenty of info but unfortunately after a few searches I haven't been able to figure out my problem.
I recently followed a guide on here for replacing the digitizer on my xperia x10 and I followed it to the letter. After re-assembling the phone it refuses to switch on and there is no response when I connect the charger.
A little history.....
The problem started when I dropped the phone in water. I know I have been told that it would never be right again etc etc but I did everything I could to dry the phone and for a couple of months after the incident the phone would switch on and display perfectly and the buttons would work fine also. The only problem was that the touch wouldn't work rendering the phone useless as I couldn't even unlock the screen.
Anyway, every now and again I would switch the phone on again to cHeck if it had made a miraculous recovery but no joy. After asking some questions I decided to replace the screen/digitizer. I remember the last time I tried switching the phone on a few days before taking it apart it wouldn't switch on. It simply gave out a few flashes from the LED. I put this down to the battery being dead and carried on replacing the digitizer.
The only response I get from the phone now is when the charger is connected to my laptop and I remove the battery, the LED gives out a red flash every 2-3 seconds. Although this doesn't happen all the time. Most of the time I get nothing at all. I must add that I did charge the phone at least once or twice successfully after the water incedent so something else must be causing this.
I have heard of issue with these phones not charging but I don't see why this would happen to mine if it wasn't even being used. The phone was only a month or two old when damaged.
Sorry for the long winded introduction and if anyone has any ideas I would greatly appreciate hearing them.
Thanks,
Gav.
anyone had any similar problems to this before?
I know this is an old thread, BUT my X10 won't switch on either now :/ not dropped it ever and ive never got it wet, i turned it off due to it being laggy and unresponsive and now it won't turn on :/ no ROM's not rooted just stock anyone have a fix ? and no i have tried putting it in the computer for the SEUS to fix it but nothing unresponsive
From yesterday my phone's touchscreen isn't working properly i.e. if I tap continuously then after 3-5 seconds it works, the taps after that keep working for similar time, and then again the taps don't respond. This is happening the whole day and I don't know what to do.
I've reset the phone, done as many things as I could find to resolve, but nothing's helping. Nothing happened with the phone till now, not even in the past few days before this the phone fell in water or had a drop or something. If there's some screen replacement etc to be done by service centre then it'll be a huge cost for me, I want to avoid that, please help.
Hi,
I had got a Clear View cover for my S8 a few months back and it worked perfectly well for all these months. Lately, it had stopped working so i restarted the phone after which it again started working but only for a few days.
This has not become a regular routine, every time it stops working, the phone needs to be restarted. I have also tried clearing the cache of the phone from recovery but that didnt help either. It still stops working after 1-2 days.
Please help me, else ill have to scrap the cover and get something else.
Thanks
Any help will be really appreciated.... anybody??
you try turn on nfc?or start phone without the case and than use the case?