Hi,
I've just joined after getting linked to this site. Seems like a huge site with plenty of info but unfortunately after a few searches I haven't been able to figure out my problem.
I recently followed a guide on here for replacing the digitizer on my xperia x10 and I followed it to the letter. After re-assembling the phone it refuses to switch on and there is no response when I connect the charger.
A little history.....
The problem started when I dropped the phone in water. I know I have been told that it would never be right again etc etc but I did everything I could to dry the phone and for a couple of months after the incident the phone would switch on and display perfectly and the buttons would work fine also. The only problem was that the touch wouldn't work rendering the phone useless as I couldn't even unlock the screen.
Anyway, every now and again I would switch the phone on again to cHeck if it had made a miraculous recovery but no joy. After asking some questions I decided to replace the screen/digitizer. I remember the last time I tried switching the phone on a few days before taking it apart it wouldn't switch on. It simply gave out a few flashes from the LED. I put this down to the battery being dead and carried on replacing the digitizer.
The only response I get from the phone now is when the charger is connected to my laptop and I remove the battery, the LED gives out a red flash every 2-3 seconds. Although this doesn't happen all the time. Most of the time I get nothing at all. I must add that I did charge the phone at least once or twice successfully after the water incedent so something else must be causing this.
I have heard of issue with these phones not charging but I don't see why this would happen to mine if it wasn't even being used. The phone was only a month or two old when damaged.
Sorry for the long winded introduction and if anyone has any ideas I would greatly appreciate hearing them.
Thanks,
Gav.
anyone had any similar problems to this before?
I know this is an old thread, BUT my X10 won't switch on either now :/ not dropped it ever and ive never got it wet, i turned it off due to it being laggy and unresponsive and now it won't turn on :/ no ROM's not rooted just stock anyone have a fix ? and no i have tried putting it in the computer for the SEUS to fix it but nothing unresponsive
Related
Last night, as I was getting my phone loaded up with travel software for my trip to San Francisco. My phone's screen decided to do go bezerk with Vertical lines. I've seen posts on it, but people just say go buy a T6 bit and make sure the cable is tight. Has this ever worked? It almost seems more like the default video settings got hozed. I've done all manners of resets, left it off the charger. I even blindly upgraded the rom (which amazingly was successful (it's trying to make a new partnership))
Nothing appears to work. I will get the T6 bit and open it up, but only because it is now worthless and I have nothing to lose. If anyone successfully fixed this problem please reply....
Dan
I saw the same symptoms when I dropped my XDA. I googled a lot then and found that this happens also spontaneously and is possibly due to the LCD connector getting disconnected from the board.
I had it repaired by O2 without a fee (Of course I didn´t tell them I dropped it ).
Good luck
Matthias
Hi there; Could do with some help please I seem to have a series issue with my Samsung Galaxy S2 today. It started this morning; I noticed the screen was randomly turning on; for no reason what so ever. It only does it when the phone isn't charging, if the data cable or the charger is plugged in; it doesn't do it.
Its on version KE7. I have tried a factory reset, and that hasn't sorted the issue. Therefore I seemed to think it was a hardware fault, however with it not being an issue when plugged in I wondered why it might be doing it.
Tap to speak also kept coming up for no apparent reason, I say kept coming up, doesn't happen all the time, but did come up about 6 times today, when I hadn't pressed anything, which would suggest the bottom centre button could be stuck or sticky, however that seems fine; and its not been near any moisture and has been a hot day.
The phone has not ever been rooted; so no issues there.
The phone battery dies very quickly within about 4 hours with the screen turning on all the time; and the phone will randomly freeze up completely, and I have to remove the battery to reset the phone.
Anybody got any ideas? Really could do with some help
Thanks
Rich
Update: It is plugged in charging now; and the MTP Application has come up; like the data cable is plugged in. That seems very odd to me...
Don't be afraid to send it back. These things aren't cheap even if you're paying through your contact, you're entitled to get what you paid for.
Your specific issues may be down to more than one thing. My screen lights up when I've read my gmail on a different device and it needs to clear the notification. Nothing too worrying about that. The other stuff does sound like some sort of shorting though and people have been given replacements for less serious issues.
I'm tempted to get mine swapped because the wifi often won't pick up an IP address and the gps won't get a fix if the phone gets too hot. Relatively minor compared to your issues.
Sent from my GT-I9100 using XDA App
Yeah I think its going to have to, I've tried playing about with settings, giving it time to cool down; pretty much everything I can think of, I really can't think what it could be, it seems to be many issues rather than just one, with it only being a month old, I expected slightly more.
Love the phone, did brilliantly yesterday; used it for lots of things; then today it just suddenly went, took it of charge, and it played up the whole way through.
Given up with it now, will take it back and see if I can get it fixed, I have 24 month warrenty with my contract.
Thanks
Put your original firmware back on if you can before attempting a warranty claim .
jje
Just like many of you, yesterday in the night, i got hit by the dead wifi. When i tried to turn wifi on, it would automaticly turn itself off. In my system info, i didn't have a mac address and after a system restore, it still didn't work. Many users there solved this problem by sending their device back at the manufacturer but since i've got a imported phone from japan, this was not a solution for me. Finally, after many reboots attempts, disconnecting battery and spamming the wifi button a lot, i had to do something else. So i took all the courage i had and opened my phone.
Fortunately, my Fujitsu F-02e was really easy to crack open and i reached the wifi module right after removing the lid. The first thing i noticed by opening the phone was all the dust it had inside even if my phone was Dustproof/waterproof. So i first blowed out all the dust and then rubbed the module a little, trying to find a way to repair my phone. Finally i resigned and put it all back up and then after reboot the wifi worked again!
This is to use only as a reference, to help all of you and people on warranty should NEVER open their phones. I am not responsible for whatever happens if you open your phone and don't guarantee this will solve your problem. Maybe i was just really lucky.
Finally, i'll share you my idea on how this happened. First, my phone is real easy to get hot when on wifi and on gps. And last week, i turned on the dev option keep lit when charging in android dev options so i keep my wifi on and share stuff easily. Then i kept my phone on it's charging station all the day long which might have overheated the device. From now on, i won't ever turn this thing on.
Good luck to all of you having the same issue i'm aware this is a real pain in the ass.
Edit: Also forgot to tell that anybody without experience with phone repairs/disassembly should never attempt opening their own and maybe ask a friend with knowledge instead.
Also i'm ready to help people out opening their F-02e but it isn't hard at all... There is no hidden screws in the phone and i removed 7 including the antenna screw.
Greetings, I would like to beg your pardon as English is not my native language, however, I will try to describe my problem as best as I could. Also, I already browse previous postings without avail to find my specific problem.
Background
My XZU is c6802 version with Lollipop, updated via PC Companion the day after the official announcement. There were no significant problem after the update, aside the battery that I felt drained faster than prior, barely noticeable though.
The Problem
That was until today. This morning I was using Chrome to do some online banking transaction when suddenly it froze, although from the beginning of my transaction I felt that the browser acting strange, namely it took longer time than usual to process.
After it froze I restart the device using the power button. The screen went blank as per usual restart process, but it never went on again.
At first I thought the battery was empty so I connect my magnetic charger, nothing happens. Unplug it and charge it via the micro usb plug, still nothing happens. I leave it for a while before I tried to switch it on again, but still, nothing happens.
(I'm aware curiouso9 posted about the bug on his stock Lollipop resulting similar problem as mine. However in my case, my phone stayed off without any response even when I try to call it)
I covered the whole screen with both hands and try to take a peek and I'm quite sure I could see a faint light emitted from the edges of the screen (vertical sides when in landscape orientation).
Afterward I try to connect it to my PC and it gave "USB not recognized" message.
Could anyone be kind enough to help me in this problem? I'm a bit reluctant to go to the local Sony Center as it means handing them my device for god knows how long without any guarantee that the problem will be solved.
I would like to thank you in advance for anyone who could spend a bit of their time to respond to this request.
Bhlack said:
Greetings, I would like to beg your pardon as English is not my native language, however, I will try to describe my problem as best as I could. Also, I already browse previous postings without avail to find my specific problem.
Background
My XZU is c6802 version with Lollipop, updated via PC Companion the day after the official announcement. There were no significant problem after the update, aside the battery that I felt drained faster than prior, barely noticeable though.
The Problem
That was until today. This morning I was using Chrome to do some online banking transaction when suddenly it froze, although from the beginning of my transaction I felt that the browser acting strange, namely it took longer time than usual to process.
After it froze I restart the device using the power button. The screen went blank as per usual restart process, but it never went on again.
At first I thought the battery was empty so I connect my magnetic charger, nothing happens. Unplug it and charge it via the micro usb plug, still nothing happens. I leave it for a while before I tried to switch it on again, but still, nothing happens.
(I'm aware curiouso9 posted about the bug on his stock Lollipop resulting similar problem as mine. However in my case, my phone stayed off without any response even when I try to call it)
I covered the whole screen with both hands and try to take a peek and I'm quite sure I could see a faint light emitted from the edges of the screen (vertical sides when in landscape orientation).
Afterward I try to connect it to my PC and it gave "USB not recognized" message.
Could anyone be kind enough to help me in this problem? I'm a bit reluctant to go to the local Sony Center as it means handing them my device for god knows how long without any guarantee that the problem will be solved.
I would like to thank you in advance for anyone who could spend a bit of their time to respond to this request.
Click to expand...
Click to collapse
Your battery is dead, you must go to Sony Centre, no other way to recover your phone
Your battery have overloaded your Motherboard, Sony must replace motherboard with new one
Have you guarantee?
Play stupid on Sony support and they will repair your Z Ultra
the-cortana-project said:
Your battery is dead, you must go to Sony Centre, no other way to recover your phone
Your battery have overloaded your Motherboard, Sony must replace motherboard with new one
Have you guarantee?
Play stupid on Sony support and they will repair your Z Ultra
Click to expand...
Click to collapse
Really? Wow, never thought of that seeing people in here have their XZU for quite a while without meaningful problem. I guess I still have the warranty (not quite sure thought, it should be expired around this time).
Thanks the-cortana-project, guess I'll have to go to the local Center then.
Hi, I have a problem with my T399n.
My phone doesn't turn on, I installed CM12 and it was good, then I flashed the stock ROM from metro again, everything was good about a month, one day I made a call, whatsapp, text and then I put it in my pocket, then when I pulled it out like 10 minutes later and it was rebooting, I didn't pay attention to this because sometimes my phone reboots itself, later It was power off. I pulled the battery, reinserted it and nothing, connected usb cable, nothing, tried to charge it and nothing, Its like my phone died. Looking for a fix, there is the usb jig that work with others galaxy's.
So I just want to know if I'm fried or if there's a last hope to revive this phone with the usb jig
Thanks!
Something similar to this happened to me, would love to know the answer...
just today...
just today, not 2 hours ago at most I was playing around with my galaxy light, deciced to root and mod it.. first step was to, ofc flash a custom recovery... well like most things I pursue I ended up fighting the damn thing for HOURS!! could not get it to register on my computer for the life of me.. now I'm far from a dev and probably one of the least experienced on/around here but something so trivial as lack of drivers, udev, faulty port/cords isn't my forte.. so eventually I whipped out my handy dandy usb jig and .... nothing... *head scratch* hmmm.... now its got my attention... so I get out the multimeter usb data/charging cable and it does show signs of life, easily registering 5.1v / 0.4 mah ... now I'm getting anxious.... so its time for the next test... usb-otg connected to dbl usb-type-A converter to connect to the pooter (it never works but I wish it would ) and nothing there... so otg to my main mobile, reverse it... hmmm seems this lil guy is taking in charge and no data xfer of any kind... since id already rotated various cables I turned my attention to the charging port.. under 6x magnification and too many lumens light I could hardly see any problems but persisted with the 99% isopropyl anyhow... end result "wtf is wrong with this garbage....?) and just as I went to throw it at the wall I spotted my personal "boneyard" where all of my former problematic/faulty devices end up and just in sight was another tmobile galaxy light, broken lcd but logic board intact.. so a quick flip of the wrist and a smack on the back and the 2 became one... fired her up, plugged it in and BAM.. instantly detected... and for some reason I cant quite seem to put my finger on, I had the urge to power it back off and insert my usb jig one final time to see if it infact would work with the galaxy light.... *device in left hand... jib in the right.... bead of sweat steadily sliding down my ruffled brow... time seemed to all but come to a screeching halt as the two came closer until the moment of trust had arrived... the initial contact, the penetration (lol) .. the pause... BOOM factory mode*
so, now that u read that half illiterate rambling from a barely educated redneck shut-in to determine if the usb jig works with galaxy light or not .. the answer is yes... it does unless its a piece of crap like one of the 2 I own is...
KatharsisSoul said:
Hi, I have a problem with my T399n.
My phone doesn't turn on, I installed CM12 and it was good, then I flashed the stock ROM from metro again, everything was good about a month, one day I made a call, whatsapp, text and then I put it in my pocket, then when I pulled it out like 10 minutes later and it was rebooting, I didn't pay attention to this because sometimes my phone reboots itself, later It was power off. I pulled the battery, reinserted it and nothing, connected usb cable, nothing, tried to charge it and nothing, Its like my phone died. Looking for a fix, there is the usb jig that work with others galaxy's.
So I just want to know if I'm fried or if there's a last hope to revive this phone with the usb jig
Thanks!
Click to expand...
Click to collapse
It does in fact work. If asking about the USB mount, from my knowledge you would've had to already installed them by turning the function on like I did in the first screen shot.
If you need them I can link them to my drive or mega. Whichever is best. Think I have drop box still too.
And yes. I have bricked this phone I'm using now for a solid 3 days when I first started with it. However cm12 has bugs, after the second time it rebooted and bricked on me I went back to Tigerlily I even had no SIM error but somehow fixed that when flashed back to stock. Cm12 caused me to flash back to stock about 3 times a day. Too much headache. Guess thats why we are not supposed to do this to our primary phones. on tigerlily ive Had a little trouble keeping super su in his place too, Got home last night and POOF, just gone for no known reason. finally got him to stick by installing him into the system with lucky patcher. Flashify, flashfire, and even rom installer all failed to keep him there. . I have also stripped down almost every file just for fun to see what other fine items I could damage, Finally found where they hide the dialer codes for the phone. They are not in any files that i have spent the last for years looking in. The codes are inside of the APK. The last place I decided to look. Everything I know is self taught and just recently started working with apps for windows 10 and merging android files into windows apps.
Now , I'm actually quite impressed with it's capabilities .
Really what's helped me dial everything in was the helped of an app called Mixplorer with all the ad-on's all of which are free.
Good luck with your brick. Myself, I have 3 other phones I'm currently working on unbricking. One of which is a hard bricked LG motion. Flashed th err wrong firmware to it a year ago. Just this week got the cup to recognize it. the code to get into the first service menu pictured here on the bottom left is *#0808#
Really what's helped me dial everything in was the helped of an app called Mixplorer with all the ad-on's all of which are free.
Good luck with your brick. Myself, I have 3 other phones I'm currently working on unbricking. One of which is a hard bricked LG motion. Flashed th err wrong firmware to it a year ago. Just this week got the cup to recognize it.
when youre ready to really see whats going on you can dial *#9900# for all the System Dump features.