Related
Hi,
I've just joined after getting linked to this site. Seems like a huge site with plenty of info but unfortunately after a few searches I haven't been able to figure out my problem.
I recently followed a guide on here for replacing the digitizer on my xperia x10 and I followed it to the letter. After re-assembling the phone it refuses to switch on and there is no response when I connect the charger.
A little history.....
The problem started when I dropped the phone in water. I know I have been told that it would never be right again etc etc but I did everything I could to dry the phone and for a couple of months after the incident the phone would switch on and display perfectly and the buttons would work fine also. The only problem was that the touch wouldn't work rendering the phone useless as I couldn't even unlock the screen.
Anyway, every now and again I would switch the phone on again to cHeck if it had made a miraculous recovery but no joy. After asking some questions I decided to replace the screen/digitizer. I remember the last time I tried switching the phone on a few days before taking it apart it wouldn't switch on. It simply gave out a few flashes from the LED. I put this down to the battery being dead and carried on replacing the digitizer.
The only response I get from the phone now is when the charger is connected to my laptop and I remove the battery, the LED gives out a red flash every 2-3 seconds. Although this doesn't happen all the time. Most of the time I get nothing at all. I must add that I did charge the phone at least once or twice successfully after the water incedent so something else must be causing this.
I have heard of issue with these phones not charging but I don't see why this would happen to mine if it wasn't even being used. The phone was only a month or two old when damaged.
Sorry for the long winded introduction and if anyone has any ideas I would greatly appreciate hearing them.
Thanks,
Gav.
anyone had any similar problems to this before?
I know this is an old thread, BUT my X10 won't switch on either now :/ not dropped it ever and ive never got it wet, i turned it off due to it being laggy and unresponsive and now it won't turn on :/ no ROM's not rooted just stock anyone have a fix ? and no i have tried putting it in the computer for the SEUS to fix it but nothing unresponsive
I just can't freaking stand it.
Starting about three weeks ago I have been having major problems with my Streak doing spontaneous restarts. I tried everything. Nothing worked.
I went as far as to use the Wiki instructions to install a version one generation old on the phone so that it would do an over the air update to the current release, which it did. Didn't help. Whenever I used the phone for a long call or to play a game or use navigation, anything that kept it actually doing something for several minutes, it would start rebooting. Sometimes it would freeze to where I had to pull the battery. I even bought a disposable phone while on vacation so I could have something I could count on.
So last week I called Dell support and described what is going on. When the tech heard the symptoms and that I had already done a factory reset and fresh loads and more factory resets, he quickly decided to replace the phone.
I have had the phone since April 2011 and in May I dropped it in my living room. It has worked perfectly but does have a crack in the glass that is purely cosmetic and is not why I tried to get it replaced. The phone has worked perfectly until recently.
I'm banging my head on the desk because, wouldn't you know it, the phone has been working perfectly since I called in. We didn't do anything, just talked about the phone, and it has had one restart in the last week. As a test, I used the Navigator for the 30 mile commute home from work. My wife called me, the phone answered, worked flawlessly on speaker, and when she hung up the Navigator came right back up as smooth as you could ask for. The one game I play right now (Grave Defense) has worked flawlessly except for one restart in the middle of a game. I couldn't ask for the phone to be better.
So what do I do when the replacement arrives? I'm not sure if I trust the phone not to start screwing up again, but I'm going to be sending back a phone that is apparently working fine but has a cracked glass. We all know the entirely reasonable conclusion they will come to.
So what should I do?
Maybe you should call Dell and tell them that the screen is cracked. Find out if they will even take it back. They may not, and wind up charging you for the new one. I've not heard of them doing this, mind you, but it sounds possible.
They may just tell you to send in the old one anyway, but you may as well let them know that the screen is cracked, since they are going to find out when they get it. Hopefully since you already have a return authorization, it wont matter...
Has anyone noticed it seems to be easier to get a replacement since they EOL'd the Streak?
Sent from my Dell Streak using Tapatalk
Maybe they're trying to clear out stock?
I had no problem sending it back with the cracked glass as long as the problem had nothing to do with the glass. Now the damned thing is working, so I have an issue with it.
I really don't understand this phone. I didn't change anything and it is like a different phone.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Oh, I thought the screen cracked after you called them.
Nevermind. As long as you disclosed the cracked screen, don't hesitate to send it back. If it was bad once, no reason to think it wont be again.
There are definitely some flaky ones.
From some posts I've read, it does seem as though they are being unusually friendly about returns lately. Prolly just my imagination...
Sent from my Dell Streak using Tapatalk
slaydog said:
As long as you disclosed the cracked screen, don't hesitate to send it back.
Click to expand...
Click to collapse
Oh, I never said I did that. I don't want people to think they are knowingly taking back units with cracked screens. The tech didn't ask if it had ever been dropped and I didn't see the point in volunteering the information as it had nothing to do with the problem I was having. I know that is not exactly taking the high road, but as I said, the screen isn't why I'm exchanging it. I considered swapping my cracked screen and the unbroken one from the replacement and sending my flaky phone back with the good screen, but they would probably notice that the phone had been dismantled and assume that is the source of the problem. I'm between a rock and a hard place here, but it's my own fault. I'm probably going to end up with a bill for the replacement phone, but I'll cross that bridge when I come to it.
I'm mostly just astonished at how freaking strange the behavior of this phone is. It was working fine then lost its mind for about three weeks and then decided that it was going to start working the way it is supposed to again with no interference from me. It was flaky in the morning, I did nothing to it, and that afternoon it started behaving itself.
Well, it froze up good yesterday. Tried everything short of swinging a dead cat over my head in a cemetary at midnight and got it working again, just in time to retire it.
When I got home the replacement was waiting for me. Smooth as silk. I played the hell out of my new favorite time sucking game last night (Stupid Zombies) and not a single hiccup. I'd love to lose some of the extra apps, but I think I am going to leave well enough alone this time. Now I need to find out how much Dell is going to bill me for returning a unit with a cracked screen, but I'll worry about that when it happens.
well i have an odd problem, one one section of my screen doesn't pick up touches, only the area where the "C" is on the keyboard...its annoying due to thats where the OK buttons are...
i can still navigate sense i can use the track ball..
anyone else have this issue, or something similar?
Try wiping back to factory if stock or reflash the rom if rooted?
I had a weird issue with the touch screen on condemned 18.3 where on the lockscreen trying to drawdown the slider and then draw the pattern, it would freak out and glitch and not follow my finger at all and take several tries to get the pattern correct.
I then wiped and flashed the latest 4.0 GSB and haven't had any issues since.
That's not quite a touch screen failure as yours is, but I thought it would help as an example as something gone wrong and how I was able to remedy it.
i've tried flashing a few different roms, went from cs18.3 to a 2.1 sense rom, back to the latest gsb. it appears its must be a problem with the digitizer...
really sucks, i have to wait to april to upgrade this phone...
might be on craigslist looking for a cheap droid 1...
Ah man, that's unfortunate. Probably wouldn't be worth it to try to replace the screen/digitizer either. Yeah, that's probably your best bet, looking to get another phone. That's how I got my Eris, from craigslist. Great way to go about doing so.
Good luck to ya.
I actually have the same problem and something leads me to believe that an update is causing this. I had it bad a few weeks ago (can't press C, V or X - though I can swipe to the keys sometimes) and then I got a few market updates for Handcent, SuperUser, and something else which then cleared it up for a few days. Then I got more updates and it's back to the failing keyboard!
I really don't know how to pin point it and I haven't done any resetting or testing yet, but I have like gut feeling something is wrong with the software, not the touchscreen since someone else is having this problem.
Mine has been failing little by little. Im now down to the top right corner, bottom left, and bottom middle not responding. It hard to even get the apps drawer to open. It all started with the letter C with me too. Just gets worse.
****, my whole qwerty row doesn't work, neither does the trackball. Upgraded to a SGS2, but I still tinker with the ol' eris.
mine moved, it started working fine for a few days, then just a smaller section to the left of C doesn't work, only really effects when i have an "OK" to press...but track ball still works and typing is so much easier now.
my wife thinks its because i dropped my phone that it started working again
I know this thread is a couple of months old, but...
There's an area on mine at the top right below the notification pull-down that appears to be dead. I'm thinking it's because I've dropped it about 10 times, but nothing looks wrong with the screen otherwise. I've thought about buying a replacement screen for about 15 bucks, but I'll be able to upgrade at the end of March, so I'm really just thinking about holding off (though if the new screen/digitizer worked, it'd make for a good mp3 player with the wifi script).
Digitizer is going bad. Same exact problem happened to mine. I replaced it myself and it works perfect. I found how to videos on youtube and bought a digitizer for about $37 online. Only took a half hour to tear apart and replace. On the difficulty level, I'd give it a 6 or 7.
MBL85 said:
Digitizer is going bad. Same exact problem happened to mine. I replaced it myself and it works perfect. I found how to videos on youtube and bought a digitizer for about $37 online. Only took a half hour to tear apart and replace. On the difficulty level, I'd give it a 6 or 7.
Click to expand...
Click to collapse
YMMV.
Someone gave me an Eris that had digitizer problems along the lower left side of the screen (in portrait orientation). I bought a replacement digitizer ($22 iirc), installed it, and it worked perfectly - for about the first 30 minutes. Then, the problem re-appeared in exactly the same location with the new digitizer.
Same behavior for a variety of stock or developer ROMs, so highly doubtful that it was a "software problem". Very very odd - the chip that does the capacitive sensing is on the flex circuit attached to the digitizer, so it gets replaced when you replace the digitizer; I suppose that the signals that come off the mini-connector between the digitizer assembly and the phone's mobo are only power, ground, and I2C signals.
But there you go; taken all those observations together, I'd suspect that I had a problem on the phone's motherboard which was thermally dependent.
Despite my (negative) experience, the odds are still in favor that a digitizer replacement will fix the problem; but there is an outside chance that it won't.
just sayin',
bftb0
This seems to be more of a software issue than a hardware issue. I'm thinking it might have something to do with the kernel as well but I'm not sure...
Anyway the touchscreen on my rooted Evo 3D with hboot 1.50 is acting up. Sometimes it completely freezes up, and other times when I try and press different parts of the screen, like the the app drawer it just doesn't register. When it freezes up it also affects the soft buttons at the bottom of the phone.
I've tried wiping it several times, and I've also tried this across several different roms, even nandroids, and it is still causing problems.
Any ideas on how to fix this?
Try calibrating your screen threw settings to see if that helps.
Locked & Loaded
""shooter on Deck""
laie1472 said:
Try calibrating your screen threw settings to see if that helps.
Locked & Loaded
""shooter on Deck""
Click to expand...
Click to collapse
I had that thought too but it still didn't work. I should also mention that the only way to "fix" the screen temporarily is to hit the power button and then hit it again to wake it back up. It usually does the trick... for a little bit. Also sometimes it just goes berserk and start pressing things without me even touching the screen
Are you running any kind of lockscreen program such as widgetlocker? I had similar problems when doing so, all issues stopped when I uninstalled.
ifly4vamerica said:
Are you running any kind of lockscreen program such as widgetlocker? I had similar problems when doing so, all issues stopped when I uninstalled.
Click to expand...
Click to collapse
I wish I was so I could fix it but I'm not.
Sorry man, was stabbin in the dark. good luck.
Think it's the Digitizer...
I have the same problem with an Evo3D hboot 1.5 also. It is rooted (ship s-on) I've had the phone for about 4 months, taken good care of it, and thus thought this bug was a software issue as well...
This is what I've tried:
-Factory Data Reset
-Restore Backup partition to original ROM
-Tried different ROMs (sense3.0, olympian xe, sicksense vX)
-Deleted and reformatted SD card
-Leaving SD card unmounted
It seems to be a popular issue, and after searching the CDMA Development forums I have found at least two other threads on the same topic here:
http://forum.xda-developers.com/showthread.php?t=1398048
http://forum.xda-developers.com/showthread.php?t=1383707
I don't have insurance, and rooting hboot1.5 is not reversible, for it is permanently recorded on the bootloader, so I'm assuming that my local Sprint representative will be of little help in the matter. From what I can find it would seem that our options are limited to:
A.) Replacing the Digitizer/LCD assembly. Looks like this runs between $70-$120. Here is a solid video on YouTube demonstrating how to remove and replace the Digitizer/LCD:
http://www.youtube.com/watch?v=suS34kNNuLo
B.) Replace the Digitizer only. From what I've gathered this is a risky maneuver which is best left to professionals with the *right* equipment, however is a much cheaper option, Digitizers are around $20.
I left a message with a local cell repair shop asking if they could replace the digitizer without a new LCD, and expect a response tomorrow probably.
Unless anybody has found an alternate cause/solution to this problem, which I would be eternally grateful for, looks like hardware replacement is the only solution.
2 questions one are you guys using screen protectors some of them will cause issues crazy ones from random clicking to unresponsive screen . Also are you using your phone out in the cold weather or really humid out ? A cold screen and hot hands will also wig it out.
I have a Zagg screen protector, which Radioshack carries for numerous phones; however it was installed when I bought the phone, four months ago, therefore I cannot imagine it would suddenly be the problem.
Also, the screen glitches at room temperature, at the most unfortunate times.
I just flashed Timat Kernels, with no results....
root3dnoob said:
I have a Zagg screen protector, which Radioshack carries for numerous phones; however it was installed when I bought the phone, four months ago, therefore I cannot imagine it would suddenly be the problem.
Also, the screen glitches at room temperature, at the most unfortunate times.
I just flashed Timat Kernels, with no results....
Click to expand...
Click to collapse
I have a zagg on mine I put on no issues for me. How do you carry your phone ? Do you tote it around in your back pocket? Just curious. Some folks have squished there phone sitting on them and messed up the screens. Not sayin you did that . Also folks carry in pocket on hot summer days and sweat gets inside the unit and messes with it.
Also is your phone brand new or a refurbished unit?
The phone is a new unit and I try to be conscious of high-moisture situations, so hopefully that is not to blame. If anything, excessive pressure may have been the cause, from a vacuum-sealed Drycase; but I'm hoping HTC's build quality would withstand such force, which should be minimal compared to being sat on.
Others are experiencing issues with the E3D digitizer, and I'm 90% sure my phone is not misbehaving from physical/moisture damage.
Is there a moisture damage indicator that can confirm/dismiss that theory?
Thanks for the suggestions
root3dnoob said:
The phone is a new unit and I try to be conscious of high-moisture situations, so hopefully that is not to blame. If anything, excessive pressure may have been the cause, from a vacuum-sealed Drycase; but I'm hoping HTC's build quality would withstand such force, which should be minimal compared to being sat on.
Others are experiencing issues with the E3D digitizer, and I'm 90% sure my phone is not misbehaving from physical/moisture damage.
Is there a moisture damage indicator that can confirm/dismiss that theory?
Thanks for the suggestions
Click to expand...
Click to collapse
Check the battery it has a sticker that will turn a solid color if it seen some water or high humidity. Also I think there is one inside the phone.
I have in the pass seen evo's that were refurbs or new units that were sat on the refurbs glass wasn't glued well and moisture got under the glass and screwed the screen up with random issues. New phones can have the same issues I guess if you really put pressure to it tho there sealed pretty well.
If the Digitizer was going bad from pressure your screen would have faint black lines going down it kinda like graph paper.
I have my phone in a trident kraken case it's been doing good so far.
After hours of research, countless nandroid wipes, and even a few ROMs, I have determined this to be a hardware issue! (at least in my case)
Much thanks to Landon4444 for providing a way to test for a lame digitizer
http://forum.xda-developers.com/showpost.php?p=20791773&postcount=40Here's how to check if this issue is result of a faulty/worn digitizer:
In the phone dial exactly *#*#3424#*#* to access the HTC diagnostic menu.
Choose line test from available options, screen will turn black.
Draw small test squiggle.
Hold phone by corners with fingers/thumbs (landscape).
Gently, twist phone torsional-ly. *GENTLY!*
In my case, certain slight torque creates a false contact in the upper-middle of my screen. Fortunately twisting slightly in the opposite direction HAS RESOLVED THE PROBLEM FOR NOW. (that was easy) However, I would not expect this tactic to work for long, and am looking into getting the digitizer replaced at the cell shop.
Evo 3d help guys!!
Okay so I just got a raise and an Evo 3D part of my boss's incentive package. (I know I have a great boss!!) but anyway its been less than a month and I haven't purchased any of the screen protector stuff or case. It is now 17 degrees in New York and I'll just drop the phone in my pocket while walking but yesterday at the beginning of a date the parking meter wouldn't take my money and upon trying to use my phone it started dialing it's own numbers and wouldn't let me enter any of the numbers for my code (to unlock). *Mind you my date kept telling me all night "Its a sign that you need the iphone" and I totally like the HTC 3D.I tried calibrating **BY THE WAY IT'S NOT ROOTED YETTT* but the only options your given is the GSensor Calibration. I've noticed that after I enter a warm area the phone starts working fine again. I've never had a smartphone and I think,upon finally getting one, that's it's totally ridiculous that the phone stops working because of the weather. At this point I think I have a faulty phone and am gonna return it to only get another 3D,but has anyone heard of this issue and if so how can I fix it. I mean like what if I had a car accident or an emergency and my "smartphone" starts acting up because of the weather???
Hey guys...I put this post up a few days ago and still haven't received a response. my timing to retunr the phone is running short so I NEED SOMEONE TO HELP PLEASE!!...Is this a normal circumstance that my phone is going through? if not I'll return it and get another one.
Its some grounding issue occuring due to maybe screen touching the main board. Its occurs on my phone very frequently and when normal occurs only if i press hard on screen
my phone also freezes up sometimes and goes crazy and it takes it some time for it to start working....
I ended up replacing the unit.it was faulty. Funny thing is I was trying to tell the guy the problem and when he grabbed it he saw it was broken.the problem worsened to the point the the phone was dialing on its own and going haywire.
Sent from my PG86100 using XDA
Got a unique issue with my G5. Have had it in a Lifeproof case for awhile now.
Last night, it spent most of the time riding in my back jeans pocket where it always does. I've had zero issues with sitting in the car, and whatnot....as I'm not a hipster that wears tight jeans that could possibly damage the device. Anywho, I got out of the car, dropped the phone into my pocket, and went about my evening at work - which involved ZERO sitting.
I go to pull out the device to make a call, verify my fingerprint, and nothing. Well, almost nothing. Its as if half of my screen is "disconnected", and the other half is out of sync. I've attached a youtube video to see what I'm talking about. ( https://youtu.be/357GcnV2-9Y ) My first thought was the ribbon cable became partially dislodged from its plug on the motherboard. I first tried flexing the phone, to see if it magically worked, or changed. Nada.
This am, brought it to the VZW store, expecting a quick fix, but since it shows no damage at all I got nothing but a warranty replacement request, and a promise it would be delivered within 3 days. Thats not good enough, as I use this thing for work. So I looked at alternatives...
I've browsed the teardown on ifixit, and was surprised at its simplicity. I pulled it apart, and re-seated the display ribbon cable, to no avail. Still apparently toast.
I've managed to get through the boot up pattern security I set up, and the phone is active. I just cant get it into MTP mode to copy my crap as I'm guessing I need to pull down and click on the notification to switch it.....which, of course, I cannot see. Basically, I just want to get my crap out of the internal storage before I ship this one back. Obviously I'm going to wipe it with the Android Device Manager before I deactivate, but still would like to salvage something.
Anybody have any thoughts? Or maybe is there a second ribbon cable somewhere that wasnt mentioned in the teardown?
Youtube link: https://youtu.be/357GcnV2-9Y
I have no advice as to how to get your files off, I'm sorry about that.
But I wanted to confirm that this isn't an isolated occurrence and it happened to me! I also babied my phone and never dropped it and it was always in a case.
I don't know what to blame as the cause, I'm hoping just bad quality control. I was hoping it's not due to flexing because it's not as sturdy due to the bottom of the phone not being physically attached.
Photos of the same thing on mine: https://imgur.com/a/eEAmA
This happened 15 days after I bought it and Best Buy returned it for a new one which three weeks later started bootlooping which was a whole fiasco to get repaired and took over a month. LG's quality control is horrible.
+1 as I am having this issue on a Sprint G5, sent to LG for repair after Sprint was no help. 29 days after purchase.
Hello. A few quick searches on my part found a thread here on the forums for controlling your device from your PC. It also includes a script to run when your phone is in recovery to enable USB Debugging. Try it out ( http://forum.xda-developers.com/showthread.php?t=2786395 ). Hopefully I have helped. If you want to just salvage files, you can enable USB Debugging and pull everything through the USB. However, if you want to still use your apps, or harvest app data, or even use titanium backup or the like to make a complete backup to transfer to the new device, enable USB Debugging, then control your phone. Follow the above thread's instructions to do so.
Thank you for your time,
Xzanah