Help please, deleted /system/priv-app/SemcCameraUI-xxhdpi-release , now bootloop - Xperia Z2 Q&A, Help & Troubleshooting

Help please,
I deleted /system/priv-app/SemcCameraUI-xxhdpi-release in order to get xposed working with cyberian camera and now bootloop at sony xperia screen and keeps rebooting and opening to it
TWRP recovery is working and I'm looking forward if anyone can help without losing my data

Dirty flash your rom without wip
Sent from my D6503 using XDA-Developers Legacy app

darknessmc said:
Dirty flash your rom without wip
Sent from my D6503 using XDA-Developers Legacy app
Click to expand...
Click to collapse
ok I'm downloading custom prerooted rom from here now
forum.xda-developers.com/xperia-z2/general/rom-xperia-z2-d6503-customised-tur-23-5-t3442058
and i was on stock + rooted
would there be any conflict if I flashed the rom from the above link ?

rshad777 said:
ok I'm downloading custom prerooted rom from here now
forum.xda-developers.com/xperia-z2/general/rom-xperia-z2-d6503-customised-tur-23-5-t3442058
and i was on stock + rooted
would there be any conflict if I flashed the rom from the above link ?
Click to expand...
Click to collapse
No, flash it.
Sent from my D6503 using XDA-Developers Legacy app

Related

[Q] bootloop after flash CM11

hi i was trying to flash the CM11 rom however it ends up with bootloop...
i've unlocked the bootload, CWM works fine, there is no error when flashing the rom, the tablet just stuck in the logo and then reboot.
can anyone please help?!
need help
is there anyone who could help?
grmk said:
hi i was trying to flash the CM11 rom however it ends up with bootloop...
i've unlocked the bootload, CWM works fine, there is no error when flashing the rom, the tablet just stuck in the logo and then reboot.
can anyone please help?!
Click to expand...
Click to collapse
Did you do a full wipe before flashing CM11 zip?
Sent from my Xperia Z1 using XDA Premium 4 mobile app
yes i did both of the "wipe"
Destroyedbeauty said:
Did you do a full wipe before flashing CM11 zip?
Sent from my Xperia Z1 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yes, i did.
grmk said:
yes, i did.
Click to expand...
Click to collapse
And did you flash the kernel before flashing ROM? Meaning the boot.img that comes with the cm11?
Sent from my SGP311 using Tapatalk

Note 5 N920C Root

First of all, all the thanks go to the developers, this is not my work.
I was just looking for a way to root my mobile without changing the kernel.
By pure luck i found out i can root the device.
I downloaded n920ci 4.3 philz touch 6.59.0 from arter97 post and chainfire BETA-SuperSU-v2.49.zip
arter97 post
http://forum.xda-developers.com/note5/development/arter97-kernel-galaxy-note-5-t3189907
chainfire BETA-SuperSU-v2.49
https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
Flash the recovery via Odin then flash the SuperSu from the recovery.
Hi. I have n920c. Is there any problem with your device? Your root is still there? Any reboot on call issue? Can you give more info? Thank you
SM-N920C cihazımdan Tapatalk kullanılarak gönderildi
Thanks for the info a.bakir, I rooted my Galaxy S6 in a similar fashion but I had problems with battery life and the phone not allowing sleep mode until a fix came out. Are you experiencing any battery issues after this root?
umudeus said:
Hi. I have n920c. Is there any problem with your device? Your root is still there? Any reboot on call issue? Can you give more info? Thank you
SM-N920C cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
alikum alsalam
I'm using the Turkish ROM 920CXXU1A0H2, so far I didn't face any problems and no rebooting during call.
SamStone said:
Thanks for the info a.bakir, I rooted my Galaxy S6 in a similar fashion but I had problems with battery life and the phone not allowing sleep mode until a fix came out. Are you experiencing any battery issues after this root?
Click to expand...
Click to collapse
You're welcome.
I'm not experiencing any problems.
this method is causes bootloop for me. What i did:
1) activated oem lock from developer settings
2) flash cwm as linked, with odin
3) flash su 2.49 zip file.
phone stuck at bootloop, recovered to stock rom with kies. Device fixed.
is there something wrong brother?
umudeus said:
this method is causes bootloop for me. What i did:
1) activated oem lock from developer settings
2) flash cwm as linked, with odin
3) flash su 2.49 zip file.
phone stuck at bootloop, recovered to stock rom with kies. Device fixed.
is there something wrong brother?
Click to expand...
Click to collapse
You need custom kernel to root. I was surprised too by reading this bcoz stock kernel doesn't boot when I tried with prerooted rom.
May be op already have custom kernel when he flashed supersu.
I like to here from op too regarding this.
Sent from my SM-N920I using xda premium
dr.ketan said:
You need custom kernel to root. I was surprised too by reading this bcoz stock kernel doesn't boot when I tried with prerooted rom.
May be op already have custom kernel when he flashed supersu.
I like to here from op too regarding this.
Sent from my SM-N920I using xda premium
Click to expand...
Click to collapse
Yes i have arter97-kernel-n920ci-4.3 installed, but flashing the recovery and the SuperSu fixed the rebooting problem.
a.bakir said:
Yes i have arter97-kernel-n920ci-4.3 installed, but flashing the recovery and the SuperSu fixed the rebooting problem.
Click to expand...
Click to collapse
That's why you got root access. If you were on stock kernel you will have got bootloop. (still your reply is confusing, I din't get you HAD kernel at time of flashing or not) So better you mention this step in OP that you also requires custom kernel.
(You said in OP that you wanted to root without changing kernel,)
a.bakir said:
First of all, all the thanks go to the developers, this is not my work.
I was just looking for a way to root my mobile without changing the kernel.
By pure luck i found out i can root the device.
Flash the recovery via Odin then flash the SuperSu from the recovery.
Click to expand...
Click to collapse
And finally I was not able to understand is there already existing root for N920C or not?
Sent from my SM-N920C using XDA Free mobile app
juliano76 said:
And finally I was not able to understand is there already existing root for N920C or not?
Sent from my SM-N920C using XDA Free mobile app
Click to expand...
Click to collapse
It's there if you do these
1.flash custom recovery
2 . flash custom kernel
3.flash supersu 2.49
Sent from my SM-N920I using xda premium
Can you guide us with this process with needed files
Sent from my SM-N920C using XDA Free mobile app
juliano76 said:
Can you guide us with this process with needed files
Sent from my SM-N920C using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3205073
Sent from my SM-N920I using xda premium
a.bakir said:
Yes i have arter97-kernel-n920ci-4.3 installed, but flashing the recovery and the SuperSu fixed the rebooting problem.
Click to expand...
Click to collapse
you just kidding, isn't it?????? is this your way "to gain root , without changing kernel !!!"
So funny. Whatever...
Mod Edit
Please continue this here:
http://forum.xda-developers.com/showthread.php?t=3205073
Thread closed
malybru
Forum Moderator

ANY DEVs : I9300 can only boot with ArchiDroid 3.1.5. Why?

Sorry my bad english,
For all devs and xda members i have big problem with my i9300, and i think i'm the only person who cannot use custom rom based on Marshmallow or Lollipop(except ArchiDroid n cm12.1-justarchi).
i'v tried many different L/M roms like cm,aicp,others without success but only @JustArchi build can boot to system though boot process(starting apps) is too long about 1 hour.
Different result with twrp 2.8.7.0 - 3.0.2.0 or PhilzTouch
1. cm-12, cm-12.1, temasek, RR-L, blisspop, aicp-L, RR-M, Bliss - M, temasek 13.0
- Wipe dalvik/system/cache/data/internal or dirty
- Flash rom and gapps(open or slim)
- With boeffla or not
- With supersu or not
- Wipe cache/dalvik or not
- Optimizing apps n starting apps
- Wait about 1 hour - Finishing boot
- Phone autoreboot n stuck in bootanimation
- Wipe cache/dalvik
- bootloop
2. Archidroid 3.1.5 n cm12.1-justarchi
- Wipe dalvik/system/cache/data/internal
- Flash rom NOR gapps(open or slim)
- Wipe cache/dalvik
- Optimizing apps n starting apps
- Wait about 1 hour
- Boot SUCCESSFULLY
- If restart must wait 1 hour to boot into system again.
3. cm 13 official n nameless M
- Wipe dalvik/system/cache/data/internal or dirty
- Flash rom and gapps(open or slim)
- With boeffla or not
- With supersu or not
- Wipe cache/dalvik or not
- Optimizing apps n starting apps
- Wait about 1 hour - Finishing boot
- SETUP WIZARD screen doesn't respond to touch (about 10 minutes.
- Autoreboot
- bootanimation about 1 hour
- again SETUP WIZARD hungs.
I tried to change value ro.adb.secure, ro.secure to 0 and add persist.sys.usb.config = mtp,adb into default.prop ramdisk boot.img/kernel cm13. And this is logcat
Code:
W/AudioSystem( xxx1): AudioPolicyService not published, waiting...
W/AudioSystem( xxx2): AudioPolicyService not published, waiting...
W/AudioSystem( xxx3): AudioPolicyService not published, waiting...
...........
Really need help n once again sorry for my bad english.
Try install SlimLP and dirty flash (without any wipe) temasek or what ever else. Archidroid work for You because have many drivers for different chipsets.
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
Try install SlimLP and dirty flash (without any wipe) temasek or what ever else. Archidroid work for You because have many drivers for different chipsets.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
ok i will try. But what different dirty flash over SlimLP ? if i flash temasek on top of SlimLP, it will formatting system.
Sent from my GT-I9300 using XDA-Developers mobile app
reinzl said:
ok i will try. But what different dirty flash over SlimLP ? if i flash temasek on top of SlimLP, it will formatting system.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
It formatting but rly not formatting
Dirty flash is the best solution for other not bootable roms
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
It formatting but rly not formatting
Dirty flash is the best solution for other not bootable roms
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
I have try but not help.. Any others solution ?
reinzl said:
I have try but not help.. Any others solution ?
Click to expand...
Click to collapse
Try reinstall efs, bootloader and modem to lastest version.
To do that install multi-file samsung TW 4.3 via odin (will delete Your all files!!). And then root this (cf auto root) and install recovery and than wipe all storage and flash rom.
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
Try reinstall efs, bootloader and modem to lastest version.
To do that install multi-file samsung TW 4.3 via odin (will delete Your all files!!). And then root this (cf auto root) and install recovery and than wipe all storage and flash rom.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
How to reinstall efs? Can i flash bl and modem from different country? Sorry asking again.
reinzl said:
How to reinstall efs? Can i flash bl and modem from different country? Sorry asking again.
Click to expand...
Click to collapse
Use multi-files from one pack, this will install all what You want and from one pack will work at 100% with different packs I don't know but propobly will work.
rafciowis1999 said:
Use multi-files from one pack, this will install all what You want and from one pack will work at 100% with different packs I don't know but propobly will work.
Click to expand...
Click to collapse
Make firmware repair with cgwyn from single file latest I9300XXUGPB1.. create BOOTLOADER,CSC,AP,MODEM.
flash with odin 3.10.7, flash cf-root, flash twrp 3.0.2.1, flash rom&gapps but not help. can you explain what about logcat above?
Sent from my SM-N910C using XDA-Developers mobile app
reinzl said:
Make firmware repair with cgwyn from single file latest I9300XXUGPB1.. create BOOTLOADER,CSC,AP,MODEM.
flash with odin 3.10.7, flash cf-root, flash twrp 3.0.2.1, flash rom&gapps but not help. can you explain what about logcat above?
Sent from my SM-N910C using XDA-Developers mobile app
Click to expand...
Click to collapse
Propobly You don't have universal chipset. flash archidroid and in fireware on auto will select one automaticly. tell me Your firemware.
rafciowis1999 said:
Propobly You don't have universal chipset. flash archidroid and in fireware on auto will select one automaticly. tell me Your firemware.
Click to expand...
Click to collapse
Autodetect : Semcosh.
reinzl said:
Autodetect : Semcosh.
Click to expand...
Click to collapse
Thats why. Find rom for this chipset. I will seek for this too.
Sent from my GT-I9300 using XDA-Developers mobile app
---------- Post added at 10:50 PM ---------- Previous post was at 10:46 PM ----------
But I thing there is no one cm13 for semcosh becouse semcosh is very rare and hard to develop.
rafciowis1999 said:
Thats why. Find rom for this chipset. I will seek for this too.
Sent from my GT-I9300 using XDA-Developers mobile app
---------- Post added at 10:50 PM ---------- Previous post was at 10:46 PM ----------
But I thing there is no one cm13 for semcosh becouse semcosh is very rare and hard to develop.
Click to expand...
Click to collapse
What about cm 11 or others i9300 kitkat rom? Cz my phone only boot with kitkat. What different semcosh and murata? Is there any i9300 LP/M rom for semcosh?
reinzl said:
What about cm 11 or others i9300 kitkat rom? Cz my phone only boot with kitkat. What different semcosh and murata? Is there any i9300 LP/M rom for semcosh?
Click to expand...
Click to collapse
Semcosh and murata and others is chipset model. Murata is base for 80% of roms.
I don't know but try flash ex. temasek cm13 with my latest kernel version (0.6.1)
Kernel have anyrom installer so will create ramdisk for any rom and propobly for any chipset.
Sent from my GT-I9300 using XDA-Developers mobile app
rafciowis1999 said:
Semcosh and murata and others is chipset model. Murata is base for 80% of roms.
I don't know but try flash ex. temasek cm13 with my latest kernel version (0.6.1)
Kernel have anyrom installer so will create ramdisk for any rom and propobly for any chipset.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
Downloading now latest temasek cm 13 and hardfix kernel 6.0.1 aroma.. will report soon.
Sorry i just tested but no joy. Bro ?
rafciowis1999 said:
Semcosh and murata and others is chipset model. Murata is base for 80% of roms.
I don't know but try flash ex. temasek cm13 with my latest kernel version (0.6.1)
Kernel have anyrom installer so will create ramdisk for any rom and propobly for any chipset.
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
I just tested but no joy. Bro ?
Sent from my GT-I9300 using XDA-Developers mobile app
reinzl said:
I just tested but no joy. Bro ?
Sent from my GT-I9300 using XDA-Developers mobile app
Click to expand...
Click to collapse
You have to stay with archidroid. for end You can test dirty flash on working archidroid (without any wipe).

Ndr Utils not Working on Marshmallow

Hello Everyone.. Are there other Apps For Marshmallow that can work with Dual Recovery? Seems like we need to power off volume down to get to recovery.. Please Help.
Thank You So Much...
Dual recovery is not compatible with marshmallow so ndrutils will not work
You need you flash recroot v? To restore a recovery also it seems some busyboxs will clash with the recovery so don't install a third party busybox the one that comes with recroot should be fine
You should get twrp 3.^
Sent from my SGP511 using XDA-Developers mobile app
dex9mm said:
You need you flash recroot v? To restore a recovery also it seems some busyboxs will clash with the recovery so don't install a third party busybox the one that comes with recroot should be fine
You should get twrp 3.^
Sent from my SGP511 using XDA-Developers mobile app
Click to expand...
Click to collapse
how to install twrp 3 ??
yukay said:
how to install twrp 3 ??
Click to expand...
Click to collapse
It's included in the recruit zip
dex9mm said:
It's included in the recruit zip
Click to expand...
Click to collapse
link ??
http://forum.xda-developers.com/showthread.php?t=2772879
flash on kitkat or mm ??
ok two things you posted this question in general not for this section second i never said to install twrp i just said get recroot v3^ and to do that http://bfy.tw/6XGg
Sent from my SGP511 using XDA-Developers mobile app

Viperaudio on OOS 3.1.4

I am on stock rom, rooted using twrp. Is it possible to have Viperaudio installed on my phone? If there is anything better than viper, can you suggest providing the link of it as well?
Sent from my ONE E1003 using XDA-Developers Legacy app
iamsonal said:
I am on stock rom, rooted using twrp. Is it possible to have Viperaudio installed on my phone? If there is anything better than viper, can you suggest providing the link of it as well?
Sent from my ONE E1003 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Viper4arise here you go https://www.androidfilehost.com/?fid=529152257862697105
If you want to install addon go here https://www.androidfilehost.com/?fid=745425885120702046
Flash viper4arise then addon reboot enjoy.
cva_kabil said:
Viper4arise here you go https://www.androidfilehost.com/?fid=529152257862697105
If you want to install addon go here https://www.androidfilehost.com/?fid=745425885120702046
Flash viper4arise then addon reboot enjoy.
Click to expand...
Click to collapse
It works on OOS 3 & Lineage 14.1 too.

Categories

Resources