Related
** I will post some pictures later today - I'm at work currently **
The Nillkin Fresh case came about 2-3 days ago and I was quite excited. But that was short lived. The case is a faux-leather flip cover case with a thin plastic shell on that clips to the phone. It looks decent enough, but I have some problems with mine (possibly QC problems):
The case though didn't completely fit!! Along the right side (near the SD/SIM) it is a bit warped - not bad or noticeable unless your looking right at it and for it.
The case is held closed by a magnet, but the magnet on the flip cover is quite small which then requires it to be precisely over the other pole or it does nothing. Not a big deal, but I wish this was thought out better.
Additionally, one of the main features of the case is (link below) how the case being used as a stand. The flip cover is a tri-fold design which should act as a stand but I haven't had much luck with it. The inside of the seemingly leather flip cover is a soft touch, almost suede, material that is quite slippery. This plus the fact that the case seems to be needing to be broken in makes for the "stand" feature unusable... it falls right over currently. (I have tried multiple configurations).
Over all, I bought the case on eBay for $9.99 with no shipping cost (ships from china - companies home country) and it took about 15 days to get here (in the US). Not bad, but I am already looking for a replacement that will make my device feel premium again rather then cheap.
Would I recommend this case? Yes, but only as a temporary case until more come out - like the official Sony cases or a case from Incipio (link below).
** Complete side note: I had a Nillkin case for my old Nexus 4 which only lasted a few short months because the leather started to peel away from the flip cover! I knew this would be a temporary case when I bought it, so keep that in mind!
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3526&page=1
http://www.incipio.com/cases/smartphone-cases/sony-smartphones/sony-xperia-z-ultra-cases.html
I was fortunate to get to try that case out and many others (being in hk and china) - and I posted about this case. It's unfortunate you didn't read my post and what case eventually went with in the big Z ultra case thread.
This case is definitely not recommended if you want one to work well with desk stand, and want to use the trifold ipad style cover as a stand.
The snap-in style plastic mounts doesn't make it easy to pop in and out of to use the desk stand, and the plastic mounts are shiny thus looks and feels cheap.
Finally, the cover doesn't even come close to the quality and feel of the ipad cover, even the vinyl kind. The material is stiff and plasticky and most importantly doesn't fold together to function as a working stand at all. It will unfold/collapse and fall over.
In addition, there's an issue with the the magnet. With the magnet closed, there is a gap between the last third of the tri-fold cover and the phone's screen. This gap exists because the case (mold or design) is not the right fit - the wider flap makes it essentially unable to align with the opposing magnet. If you try to push the flap down to get rid of the gap, you inadvertently push/slide the magnet off and the cover comes loose. In practice, the magnet will never be engaged because you'll always push the cover down somehow (pocket, bag, stacking something on top).
The only Nillkin I recommend is the http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3516&page=1 shield case. I ended up buying the black one for scenarios where I don't want a flip cover. The fit is good, texture is good (good grippy backside), and it doesn't look too cheap (no shiny plastic). It's decent protection for rougher than usual situations. There are sections where there's a thin piece of plastic on the edge of the phone (like over the usb flap) where it feels weak, cheap and easily breakable. Besides that only issue, I like this case as a back-up.
For a flip cover case that works well with a desk stand, actually stands up, and feels decent quality - I recommend Kaso and Krussell. I went with Kaso as a cheaper alternative for now.
So I guess it's not just me... which is kind of a bummer, but I have already found a replacement. Now if only October 22 was here (my Birthday) I could get a new case!
Thanks for the replay, some good thoughts there!
toonhead85
Funny how the 2 Nillkin cases the OP talks about are the exact 2 I bought online.
I bought the white Fresh, and Yellow leather.
Anyway, after having used both, now I know that flip covers, despite the protection it gives, tend to get in the way of general use. Answering calls involve one extra hassle step.
Taking pictures, you have to roll the flip cover up into the triangle as if you are going to use it as a stand and hold it in your left hand, because simply flipping it and folding it over will obstruct the camera.
Nothing wrong with the build quality...I am sure it is better than most cheapos out there. All the useful ports are left uncovered (one of the reasons why I chose Nillkin...there is actual thought process that has gone into the design). If you want to use the magnetic charging port, not many other manufacturers apart from Nillkin make them uncovered.
The yellow I chose is less vibrant in colour (than what it seemed on screen), and does not go so well with the white ZU I have, so that got retired until the day I get SBH-52 and leave my phone in the bag.
For the Nillkin Fresh, I got in white, and am very happy with it, and currently in use.
It has a nice tight fit, seems to be made of good tough plastic, and the texture on the back helps with general grip.
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
The number of times that i thought that I had closed the USB port properly, but was still slightly open (thus not making it fully waterproof) has prompted me to get the magnetic charging cable. I knew it was something I wanted while I was out choosing the case, so for those who are still looking for cases, I won't say go Nillkin, but make sure you go for one that has the magnetic charging port uncovered.
Whether you buy DK-30 is a different debate. Some like it, but some find it expensive for what it is. There are not many covers out there tat allow you to dock with it on.
But the USB magnetic charging cable is something I believe every ZU owner should have. For that reason get a cover with the port uncovered.
jewelkobayashi said:
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
Click to expand...
Click to collapse
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
liqn7 said:
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
Click to expand...
Click to collapse
Here u go
jewelkobayashi said:
Nothing wrong with the build quality...
Click to expand...
Click to collapse
I came back to post a quick update about the case I got and this caught my eye... actually the build quality is the reason as well!!
The case is broken ><. On the top left hand side (near the charging port) the case has snapped. A piece is broken clean off and only after about 2 weeks. I know the case was $10, but I also had build quality issues with a Nexus 4 case, so I am going to say the quality is rather low.
With this new information, I am going to say stay away from this case. The long import time (from HK to US), and poor quality aren't worth it. Spend the few extra bucks and get a quality case you will have for more than a few weeks.
Just my 2 cents though...
toonhead85
What has everyone found for cases? I'm using the clear Mpero Flex S case. It provides extra grippiness, decent protection and the clear one allows you to see the details of the phone.
Edit: plus they're inexpensive
http://www.empirecase.com/Xperia_Z3v_Skin_Cases_FLEX_S.html
I bought mine on swappa with a black incipio case,but I just use the verizon holster daily.
I got a stickerboy yellow skin for the back to stop the slippery feel.
Of course I made a pouch to carry it in.
I've also ordered a Skinomi full body skin and I'm going to try that for a while.
I have the black silicone case from Verizon when I got my phone together as a bundle, but I'm debating to myself whether I should go for a clear case that shows my phone's details. Clear cases get yellowing just because over time, it absorbs our oils and such. Will the flex cases do the same because of the material?
GigaSPX said:
I have the black silicone case from Verizon when I got my phone together as a bundle, but I'm debating to myself whether I should go for a clear case that shows my phone's details. Clear cases get yellowing just because over time, it absorbs our oils and such. Will the flex cases do the same because of the material?
Click to expand...
Click to collapse
It's a TPU material. Mine hasn't yellowed yet, but then again it's not that old.
I like the holster kickstand case from Verizon. I don't use the holster cover and the hard kickstand body is protective and convenient with the kickstand. The black case with white phone looks sharp.
Sent from my D6708 using XDA Premium 4 mobile app
Cruzerlite "Bugdroid" TPU Case...
Link
Very good Material, very good fitting, just perfect.
Used it on 2 oher Mobiles and im completely satisfied.
I'm using the incipio case from verizon with verizon's tempered glass protector. The case covers the edges nicely.
Has anyone came across a bumper case that exposes the back?
I use the otterbox defender. I would get a lifeproof case if they made one for the z3v.
cpc28655 said:
I use the otterbox defender. I would get a lifeproof case if they made one for the z3v.
Click to expand...
Click to collapse
I think you're way off in what Sony designed in their flagship series: the unneeded accessories for lifeproof cases. It's already designed and built to be IP68 ratings, meaning it's waterproof and dustproof for the phone itself. There is an article that tested how well its ratings are from the Z2 as someone dropped their in the middle of the ocean and had it recovered 3 weeks later.
The back glass panel cracked, but once charged up, it's still usable as if nothing happened.
And BTW, getting a lifeproof case will make your phone look like another iPhone from the outside. Dx
GigaSPX said:
I think you're way off in what Sony designed in their flagship series: the unneeded accessories for lifeproof cases. It's already designed and built to be IP68 ratings, meaning it's waterproof and dustproof for the phone itself. There is an article that tested how well its ratings are from the Z2 as someone dropped their in the middle of the ocean and had it recovered 3 weeks later.
The back glass panel cracked, but once charged up, it's still usable as if nothing happened.
And BTW, getting a lifeproof case will make your phone look like another iPhone from the outside. Dx
Click to expand...
Click to collapse
Yeah I remember reading that article. That was an interesting one.
Bruce Lee said:
Yeah I remember reading that article. That was an interesting one.
Click to expand...
Click to collapse
I stand corrected, SIX weeks at 32 feet underwater. That's an incredibly impressive feat.
Has anyone noticed that the Xperia Z2 (L50t) China version seems to be the exact design specifications as the Z3v. It appears we may be able to use all of its cases and screen protectors. I'm going to check it out and report back.*
Google pics of the Xperia Z2 L50t and check it out.
jal3223 said:
Has anyone noticed that the Xperia Z2 (L50t) China version seems to be the exact design specifications as the Z3v. It appears we may be able to use all of its cases and screen protectors. I'm going to check it out and report back.*
Google pics of the Xperia Z2 L50t and check it out.
Click to expand...
Click to collapse
That's interesting that there are many similarities and not many other sources discuss the design being similar. The only thing that I think the cases will do for our phones is leave open a space that's for the magnetic dock charger. Other than that, I hope it may work so it could open more case options.
GigaSPX said:
That's interesting that there are many similarities and not many other sources discuss the design being similar. The only thing that I think the cases will do for our phones is leave open a space that's for the magnetic dock charger. Other than that, I hope it may work so it could open more case options.
Click to expand...
Click to collapse
I have a front and back tempered glass protector and a case coming from China for the L50t variant. I'll report back how they fit whenever they come in.
jal3223 said:
I have a front and back tempered glass protector and a case coming from China for the L50t variant. I'll report back how they fit whenever they come in.
Click to expand...
Click to collapse
Here's the dimensions I found through some searches, seems like they're incredibly close, let's hope it fits for you!
L50T: 149 x 73.3 x 8.2mm
Z3V: 148.5mm x 73.4mm x 8.9mm
Z3: 146 x 72 x 7.3 mm
I'm using the Incipio case from Verizon. I've always used Otterbox Commuter cases on my phones, and this Incipio is the closest thing to that. I'm really happy with it so far.
I've really enjoyed the form and beauty of the Z3v without a case. I have a couple cases that I use on occasion when doing more rugged things, but this phone is a looker and I don't want to cover it up.
I've been using a heavy duty case with built-in screen protector on my phones for the last few years. Because of the nature of my work having the screen protector built into the case is important, I only use the case at work and I hate using stick on screen protectors on my phones since they're not needed for normal use. I've been trying to find a heavy duty case with built-in screen protector for the S8+ but they all come without the screen protector, I'd guess it's because of the curved screen. Does anyone know if there will eventually be versions that come with the screen protector? Or if there are some cases with the screen protector that I haven't found yet?
SubyWill said:
I've been using a heavy duty case with built-in screen protector on my phones for the last few years. Because of the nature of my work having the screen protector built into the case is important, I only use the case at work and I hate using stick on screen protectors on my phones since they're not needed for normal use. I've been trying to find a heavy duty case with built-in screen protector for the S8+ but they all come without the screen protector, I'd guess it's because of the curved screen. Does anyone know if there will eventually be versions that come with the screen protector? Or if there are some cases with the screen protector that I haven't found yet?
Click to expand...
Click to collapse
Lifeproof has their case and it's waterproof, but expensive @ $80! Also, you can look at the Love Mei cases and can buy them from ebay or amazon. :good:
http://www.lovemeicase.com/index.php?route=product/category&path=87_207
I have good experiences with love mei powerful and otterbox defender cases on past phones.
the otterbox defender is a plastic hard case with an additional silicone case wrapped around it, and an integrated plastic screen protector.
the otterbox usually also comes with a clip that can be used as a holster or kickstand.
the love mei powerful is basicly a DIY kit for making your phone an "active" model.
it's a metal case with a silicone bumper sandwiched between the front and back plates, held together by screws.
the screen protector is glass glued to the front metal plate, and all holes are covered or sealed to offer basic splash and dust resistance.
if you're looking for a case you only use for work and take off at home i'd recommend the otterbox, it's the easiest to take off.
Otterbox Defender doesnt have a built in screen protector!!! Per Otterbox website
jpinks said:
Otterbox Defender doesnt have a built in screen protector!!! Per Otterbox website
Click to expand...
Click to collapse
Can confirm it does. I have it, it definitely feels like a sturdy commuter or a unicorn bettle case
No it doesn't. I have one too.
thedicemaster said:
the otterbox defender is a plastic hard case with an additional silicone case wrapped around it, and an integrated plastic screen protector.
the otterbox usually also comes with a clip that can be used as a holster or kickstand.
if you're looking for a case you only use for work and take off at home i'd recommend the otterbox, it's the easiest to take off.
Click to expand...
Click to collapse
I have the otterbox defender for the S8 (not the +). I can confirm that the otterboxes for both the S8 and S8+ DO NOT have built in screen protectors. While every previous versions of these cases did, and they gave no indication prior to the release date of the phone that they wouldn't (including on their website when they started shipping them, I preordered mine when I ordered my S8), the new version "is screenless to allow full use of the curved screen", and otterbox tells you to buy one of their alpha glass screen protectors at $50/pop if you want a screen protector.
If you check Otterbox's website you'll see the myriad of 1-star reviews for their S8 cases over this issue, as they basically bait-and-switched everyone who preordered the Defender, and are now saying "Give us more money to have your screen protected."
I'd steer clear of the Otterbox for that reason. If you don't need the holster, the Lifeproof is probably your best way to go. If you do need the holster... Well then, I don't know what to tell you. Perhaps an Otterbox with an added screen protector, though the ones I've tried don't fit well. Or get the Lifeproof and add a belt clip to it. The one Lifeproof sells has some mixed reviews, but you can probably aftermarket add one that would work, or just use an old fashioned holster-type slip case.
Anyone can recommend me any cases for the S8, with a built in screen protector? All the ones you mentioned here are not released yet. Plus I've done research before the S8 released, and the day the S8 released, and I was unable to find any cases with a built in screen protector, that wss already released. All the info I can get is greatly appreciated!
SubyWill said:
I've been using a heavy duty case with built-in screen protector on my phones for the last few years. Because of the nature of my work having the screen protector built into the case is important, I only use the case at work and I hate using stick on screen protectors on my phones since they're not needed for normal use. I've been trying to find a heavy duty case with built-in screen protector for the S8+ but they all come without the screen protector, I'd guess it's because of the curved screen. Does anyone know if there will eventually be versions that come with the screen protector? Or if there are some cases with the screen protector that I haven't found yet?
Click to expand...
Click to collapse
I just came across Punkcases this morning. They have a few different versions of cases. One of them has a built in screen protector, and is certified water, snow and dustproof, and also military grade. I just purchased mine this morning a few minutes ago. I thought I would share here, since you're also in need of a case with the built in screen protector.
The reviews on their website, for this specific case, seems to be very good. I have yet to try one out myself though. But as soon as I receive mine I will let you know how it is. I chose expedited shipping when I ordered this morning. By the way, I already broke my S8 while in an OtterBox Defender case, and had to get a replacement from insurance(arriving today). But to me, OtterBox cases are complete BS, and the case broke in one day. Not to mention, after the S8 and the OtterBox case both broke. My dog got a hold of the OtterBox case and was able to rip off the side bumpers, and rip the case in half, in literally seconds. That's how bad, and crappy Otterbox cases are, that they're able to rip in seconds! It's supposed to be very durable and resist a lot! I honestly thought it would be tough as nails, and resist a dog messing and biting with it for awhile before it got damaged! Not seconds!
But I leave you with a link here on the bottom, directly to the case I purchased. which has a built in screen protector.
https://www.punkcase.com/products/g...irtproof-snowproof-case-1?variant=33285829377
My S7 edge just got bricked last week and so, having nothing to lose, I thought I'd test the case. It's an Otterbox. I'm not sure of the name but it's fairly thin looking. I was honestly expecting poor results but throwing it about 2m high and 3m forward onto cement left it without a scratch. I did it about 7 or 8 times.
Sent from my SM-G955F using Tapatalk
bigj0110 said:
I just came across Punkcases this morning. They have a few different versions of cases. One of them has a built in screen protector, and is certified water, snow and dustproof, and also military grade. I just purchased mine this morning a few minutes ago. I thought I would share here, since you're also in need of a case with the built in screen protector.
The reviews on their website, for this specific case, seems to be very good. I have yet to try one out myself though. But as soon as I receive mine I will let you know how it is. I chose expedited shipping when I ordered this morning. By the way, I already broke my S8 while in an OtterBox Defender case, and had to get a replacement from insurance(arriving today). But to me, OtterBox cases are complete BS, and the case broke in one day. Not to mention, after the S8 and the OtterBox case both broke. My dog got a hold of the OtterBox case and was able to rip off the side bumpers, and rip the case in half, in literally seconds. That's how bad, and crappy Otterbox cases are, that they're able to rip in seconds! It's supposed to be very durable and resist a lot! I honestly thought it would be tough as nails, and resist a dog messing and biting with it for awhile before it got damaged! Not seconds!
But I leave you with a link here on the bottom, directly to the case I purchased. which has a built in screen protector.
https://www.punkcase.com/products/g...irtproof-snowproof-case-1?variant=33285829377
Click to expand...
Click to collapse
Dogs you receive this case yet? Any idea when it's going to be released?
bigj0110 said:
But I leave you with a link here on the bottom, directly to the case I purchased. which has a built in screen protector.
https://www.punkcase.com/products/g...irtproof-snowproof-case-1?variant=33285829377
Click to expand...
Click to collapse
Looks interesting but I can't see on the website how you install it. It also looks like you would have to disassemble it whenever you need to change the SIM or MicroSD. I travel abroad every month or two and have to change my SIM every time.
When you have it, can you also check if it is wireless charging friendly?
GCbard said:
Dogs you receive this case yet? Any idea when it's going to be released?
Click to expand...
Click to collapse
I'm waiting for it to arrive to me. But it is already released. It should be here any business day now.
Otterbox Defender with Screen Protector Available in the UK?
This is my first time here... I found this thread because I too, am searching for the best of the best case for my Galaxy S8.
I was sitting on a flight from the UK to New York 3rd week of June 2017, next to a woman who had an Otterbox Defender for her Galaxy S8 and it had a Otterbox OEM built in screen protector. The quality of the plastic appeared to look and feel like the same plastic they have always used in the defender model.
I had previously read the threads from various sites on this case because I have always used the defender since my galaxy S about 7 phones ago and was going to upgrade my S7 to the S8 soon. I was actually searching for case info while on the flight. Anyway, I had read that the new Defender for the S8 came without screen protection.
I had a discussion with her and she told me that bought the case at a street shop in Glassgow that sold many things other than phones so it was not a dedicated phone store. I howevr, have not been able to locate one even on international websites. There is no mention of this on Otterbox's website and I neglected to ask her how long ago she bought it.
Could it be that this is another "Not In America" thing? Any light anyone can shed on this would be helpful! I received my S8 yesterday but have not yet ordered a case for it.
I got the Punkcase waterproof (Studstar) for my S8. Firstly, I just wanted to mention the customer service I received from Punkcase - it was pretty bad. I ordered the case, two weeks later still hadn't received anything, and no updates. So I found another waterproof case that looked pretty similar on eBay, ordered that and asked to cancel the Punkcase. They sent me a message saying the case was very popular and backordered, and thanks for your patience, but they didn't cancel it. Almost two weeks later still no case, and no word, so I emailed them again and told them to cancel my order (again), since it hadn't been shipped and was almost a month since my order. They immediately (within an hour) sent me a tracking number saying it had been shipped, but no apologies or communication, and no cancellation. However, the tracking number was just that, a number - it hadn't been shipped at all, and wouldn't be for another week. They just created a tracking number to prevent me from being able to cancel the order. Pretty dishonest.
I finally received the case, and really it's just ok. It feels cheaper than the $40 I paid, and certainly if I'd paid the regular price of $80 I would have been pissed.The one I got off ebay for $15 was about the same quality. It is definitely water proof, and has the screen protector, but there is a bit of a gap between the cheap plastic protector and the screen, the case adds enormous width and I feel like a face down drop would absolutely not protect the screen enough to prevent a shattered screen. I'm going to use it for a while, but keep looking guys, the Punkcase is not the one.
Ghostek Cases?
Does anybody here have any experience with Ghosttek Cases?
More specifically this one: http://www.ghostekproducts.com/phon...f-protective-case-cover-ghostek-nautical.html ?
I have the pelican voyager for the s8 plus and it comes with a removable built in screen protector and a belt clip.. some of the reviews weren't great but I took a chance on it and liked it just fine
I had the nautical. Its a good case for 40 dollars.
I now have the lifeproof fre and ill say from having both the fre is definitly worth the money.
I didnt even want to test the nautical under water....the lifeproof works great under water.
The nautical is bulky
The lifeproof is slim... about perfect... only downside is the screen protector has a very small rise off the screen... not a deal breaker tho.
Hope this helps
S8 Clayco Hera Series https://www.amazon.com/gp/product/B06XJ3L7FL/
I don't think I have seen this case mentioned, but it seems to be a good middle ground between something like a life proof and one of the cases more meant for further waterproofing. The reviews on the S8 version really bash it for the screen protector losing a lot of touch sensitivity, but in my experience it isn't that much- just the occasional key stroke. Meanwhile the S8 Plus version is well reviewed. Overall I like it and use it, although not all the time only when I am doing something where I really need the protection such as hiking or going to the bar and having a few.
Edit: Looks like the one I bought is out of stock and they are coming out with an updated one: https://www.amazon.com/Clayco-Updated-Version-Full-body-Protector/dp/B073TRVKKK/
mrspock08 said:
I have the otterbox defender for the S8 (not the +). I can confirm that the otterboxes for both the S8 and S8+ DO NOT have built in screen protectors. While every previous versions of these cases did, and they gave no indication prior to the release date of the phone that they wouldn't (including on their website when they started shipping them, I preordered mine when I ordered my S8), the new version "is screenless to allow full use of the curved screen", and otterbox tells you to buy one of their alpha glass screen protectors at $50/pop if you want a screen protector.
If you check Otterbox's website you'll see the myriad of 1-star reviews for their S8 cases over this issue, as they basically bait-and-switched everyone who preordered the Defender, and are now saying "Give us more money to have your screen protected."
I'd steer clear of the Otterbox for that reason. If you don't need the holster, the Lifeproof is probably your best way to go. If you do need the holster... Well then, I don't know what to tell you. Perhaps an Otterbox with an added screen protector, though the ones I've tried don't fit well. Or get the Lifeproof and add a belt clip to it. The one Lifeproof sells has some mixed reviews, but you can probably aftermarket add one that would work, or just use an old fashioned holster-type slip case.
Click to expand...
Click to collapse
I disagree. Life proof sux. There is like a 1mm strip of foam in the middle of the case and that is the extent of drop protection. I have both defender with alpha glass and lifeproof. Lifeproof feels like a trinket from a quarter machine at the grocery store compared to defender. I have gone through 5 or 6 alpha glass protectors and the new ones are better but still not a perfect fit. Call the warranty line for whichever case u want and u can get it for like $5. Both of these cases have lifetime replacement warranties.
Hey everyone,
Since I typically use a flip case (a regular case with a protective cover for the screen that flips open) with all the phones I've owned, I thought I'd open a thread to start a discussion about people's experiences and recommendations with flip cases for the 6T.
Share something and help someone with what product to use!
Reserved
I'm currently using this one:
Foluu Compatible OnePlus 6T Case,... https://www.amazon.com/dp/B07K2S5DFC?ref=yo_pop_ma_swf
Pros:
+ magnetic edge on flip cover afixes the flip cover to the back, neatly preventing flapping
+ the sides of the phone are completely covered by a transparent bumper, with cutouts only for usb, alert slider, and speakers
+ relatively screen protector friendly
Cons:
- not a smart cover
- back cover is not a single piece with the sides, adding to bulk
Again, the pro/con list reflects my personal preferences and of course, may not apply at all to you.
Orzly Wallet Flip Case looks decent enough. I am currently using the oneplus 6t flip case with card slot, and its okay. Doesnt flap much, but it does not compare to my last otterbox strada case for the iphone 8 plus. Still looking for something similar.
I've also purchased some ringke 3m card slots, both the plastic and the nylon to add to the tpu cover that was included with the phone. Although not a flipcase, the downside with not having a solid magnet or full edge protection gives higher probability of the phone landing face down when dropped.
Exholeus said:
Orzly Wallet Flip Case looks decent enough. I am currently using the oneplus 6t flip case with card slot, and its okay. Doesnt flap much, but it does not compare to my last otterbox strada case for the iphone 8 plus. Still looking for something similar.
I've also purchased some ringke 3m card slots, both the plastic and the nylon to add to the tpu cover that was included with the phone. Although not a flipcase, the downside with not having a solid magnet or full edge protection gives higher probability of the phone landing face down when dropped.
Click to expand...
Click to collapse
I second the motion -- the Otterbox Strada on my Samsung S7 Edge is the gold standard for me. Most expensive case I've bought but has lasted many multiples longer than any other case. It's still a tank and still in use nearly three years later.
Closest case for OnePlus to that standard was the Tech21 flip case for my 6. Don't think they make it for the 6T though.
I'm using the flip case that I got from OnePlus when it's working fine.I've had better and I've had worse but pretty good I'm happy. No issues,, thinking about getting a OtterBox when they come out just for safety. But they're so big and bulky and ugly.,,,,,,,, I guess we'll see
I like cases.
My wife thinks that I have a fetish for phone cases.
I change them when I go out depending on what I feel like.
Here are the flip cases that I have purchased so far;
https://www.ebay.ca/itm/For-OnePlus...var=472229251615&_trksid=p2060353.m2749.l2649
The traditional brown leather flip case.
https://www.ebay.ca/itm/For-OnePlus...var=591631248320&_trksid=p2060353.m2749.l2649
Dr. Who TARDIS because....every phone needs to be inside a Tardis...
https://www.ebay.ca/itm/For-OnePlus...var=572979395291&_trksid=p2060353.m2749.l2649
Blue leather scroll work for when I'm feeling like Jazz.
https://www.ebay.ca/itm/PIN-1-Art-C...var=472327549790&_trksid=p2060353.m2749.l2649
Old School fun right here... I have purchased so many freaking cassettes over the years.. ugh. Why not put my phone in one...
I chose the white and green tape.
https://ca.mobilefun.com/olixar-xtome-leather-style-oneplus-6t-book-case-brown-70015
Old brown leather bound book.
I think that this book one will be my favorite flip case.
Only the Cassette tape case has come in so far.
It's a bit larger then a real cassette tape and it's a big large for the phone.
Then I've purchased another half dozen or so hard cover cases/non flip.
geeksquad2 said:
I like cases.
My wife thinks that I have a fetish for phone cases.
I change them when I go out depending on what I feel like.
Here are the flip cases that I have purchased so far;
https://www.ebay.ca/itm/For-OnePlus...var=472229251615&_trksid=p2060353.m2749.l2649
The traditional brown leather flip case.
https://www.ebay.ca/itm/For-OnePlus...var=591631248320&_trksid=p2060353.m2749.l2649
Dr. Who TARDIS because....every phone needs to be inside a Tardis...
https://www.ebay.ca/itm/For-OnePlus...var=572979395291&_trksid=p2060353.m2749.l2649
Blue leather scroll work for when I'm feeling like Jazz.
https://www.ebay.ca/itm/PIN-1-Art-C...var=472327549790&_trksid=p2060353.m2749.l2649
Old School fun right here... I have purchased so many freaking cassettes over the years.. ugh. Why not put my phone in one...
I chose the white and green tape.
https://ca.mobilefun.com/olixar-xtome-leather-style-oneplus-6t-book-case-brown-70015
Old brown leather bound book.
I think that this book one will be my favorite flip case.
Only the Cassette tape case has come in so far.
It's a bit larger then a real cassette tape and it's a big large for the phone.
Then I've purchased another half dozen or so hard cover cases/non flip.
Click to expand...
Click to collapse
Damn, your wife's probably right..!
But it could be worse: you could have a phone fetish instead of a phone case fetish, and that would be much more expensive.
The flip cases that I have ordered so far have come in.
Also, two of the hard cases have arrived as well. (As an aside, I don't like any of those yet. We will see if the rest of the hard cases are any better)
I like the oneplus oem flip case because it is the only one that has a magnetic feature that turns the screen on and off.
That is nice.
But I find it too small and it doesn't offer much protection.
And it only has one debit card slot.
Not useful as a wallet.
The oneplus, cassette tape and book flip cases do not have a magnetic clasp to keep them closed.
I kind of like that feature.
It gives me a fidget to play with.
And it makes it more noticeable if someone opens the case to take my debit card? Dunno.
Lol
Taking a look at the back side of these cases, some of them are not like the others.
Some of the cutouts look off.
I haven't checked them to see if it affects function or not.
Honestly I don't use the camera much anyways.
If anyone has any questions about these cases, let me know and I will do my best to answer them.
If anyone has a suggestion of another flip case for me to try out, then I am all ears!
P.S. And yes. The book is my favorite case so far. Followed by the Tardis.
Hi, I am looking for the same, but it is so hard... I know exactly what I want but all of the good looking cases are plastic inside and all the silicone ones are not-so-good looking.
Anyone found so far a sleek and elegand flip case with silicone inside?
Just wanting to see what all cases everyone is getting for their S20 Ultra. I am debating on getting the UAG Monarch Series case again. Their really good cases and not bulky at all.
I've preordered the Samsung Protective Standing Cover along with the phone.
I've also ordered a Zizo Bolt.
I used to like UAG Monarch, UAG Plasma and Otterbox Symmetry cases, but they offer very little drop protection at the bottom lip, which is loose.
Also thinking of getting the Speck Presidio Grip and Gear4 Battersea.
I work in a factory environment so defender/whitestone all the way...
I'm trying to find one that will a) have built-in magnets for magnetic mounting (want them built-in so there's no bulge from inserting a flat one between the case and the phone so it lies flat on it's back), and b) have those magnets in a place where it minimizes disruption to wireless charging. The only one I was able to find for my S9 was by Pitaka (with their own magnetic mount, which makes sense since the magnets are in a non-standard location), but the case had an issue where the top/bottom/side lips wouldn't extend past the front face to protect the screen from lying flat on it's front on a desk.
texasmax said:
I'm trying to find one that will a) have built-in magnets for magnetic mounting (want them built-in so there's no bulge from inserting a flat one between the case and the phone so it lies flat on it's back), and b) have those magnets in a place where it minimizes disruption to wireless charging. The only one I was able to find for my S9 was by Pitaka (with their own magnetic mount, which makes sense since the magnets are in a non-standard location), but the case had an issue where the top/bottom/side lips wouldn't extend past the front face to protect the screen from lying flat on it's front on a desk.
Click to expand...
Click to collapse
Mous is an option:
https://www.mous.co/
I'm sticking with the Unicorn Beetle Pro by supcase,been rockin that case for years throughout my different Notes and S series phones.Just as good as Otterbox defender but way cheaper.Win,Win in my opinion.
sabesh said:
Mous is an option:
https://www.mous.co/
Click to expand...
Click to collapse
Nice- thanks!
Pitaka, since many years, for day to day / office, dBrand Grip case (with custom pitaka plates under the back sticker) as a self made 'Pitaka pro' for days with higher demand for protection.
Using Pitaka in the car daily, so I want that option ti stick it to my magnetic Qi charger in the car.
Latercase for me. Probably the DBrand case and skin also
I'll go with the Spigen Neo Hybrid. Slim enough not to be embarrassing, but offers drop protection. Gone are the days of OB Defender, UAG, etc. Second option would be the SupCase Unicorn Beetle.
I also buy the QuadLock case for the Summer, to use with my bike.
Black leather offical from their site. Although most of the time I don't use a case even though I should. But given the hefty price tag it probably will be wise to keep it on
Negan said:
Black leather offical from their site. Although most of the time I don't use a case even though I should. But given the hefty price tag it probably will be wise to keep it on
Click to expand...
Click to collapse
The (Samsung) black leather case was nice from the S10+ series. Got an open box from Best Buy for $29 in perfect condition although the package looked like Flossy opened it! LOL. The silicone IMO was junk!
The rugged (Samsung) case is great, the kickstand comes in handy. I have one on my S10 5G and Note 10+ and will be picking one up for the S20U.
I may splurge and get the Pitaka for the S20U as the pics I've seen with the phone in it just look plain sick!
I'm gonna start with the Caseology Parallax and Spigen Neo Hybrid for now. Got them both on the way!
Spigen Rugged Armor, already in hand lol
Been using S-view cover on N10+ since September, it does great screen protection job, don't want anything else for my S20 Ultra. Scratch protection 24/7 and a piece of mind when the phone is being put into or taken out of jacket or pant's pockets. My N+10 screen still has a 'mint' looks even after 6 months of use w/o any protective film, I peeled that off right after getting it.
mzsquared said:
Been using S-view cover on N10+ since September, it does great screen protection job, don't want anything else for my S20 Ultra. Scratch protection 24/7 and a piece of mind when the phone is being put into or taken out of jacket or pant's pockets. My N+10 screen still has a 'mint' looks even after 6 months of use w/o any protective film, I peeled that off right after getting it.
Click to expand...
Click to collapse
I don't see an s-view cover for the Ultra on Samsung's website. S20 and S20+ have it.
sabesh said:
I don't see an s-view cover for the Ultra on Samsung's website. S20 and S20+ have it.
Click to expand...
Click to collapse
Well, when I was writing my previous post I just assumed that they will have S-view case for S20s, most Samsung phones have it and now I found it, they don't list the price yet:
https://www.samsung.com/us/mobile/galaxy-s20-5g/accessories/
mzsquared said:
Found it, they don't list the price yet:
https://www.samsung.com/us/mobile/galaxy-s20-5g/accessories/
Click to expand...
Click to collapse
Cool!
Gone for the grey samsung case with the stand option , abit dull but it protects the phone , second choice would be a case from spigen
Spigen Rugged Armour. Went with it for the S9+, S10+ and now S20U. Protected my phone perfectly for 3 years so why change