Related
I have an i9205 that I am trying to fix for somebody. The phone was acting weird so he rebooted it and did a battery pull. After doing so the phone would just sit on the samsung boot screen. I could boot into download mode, but if you went into recovery mode it just said installing update. It would get to 100% restart and then just sit on the samsung logo. Everytime you booted into recovery it would do this. I downloaded kies and tried to reflash the phone. during the flash an error popped up and said to retry in emergency mode. That also failed and phone said "sw rev check fail fused 1 binary 0" on the screen. I am thinking now the only option is probably to flash with odin, but was wondering if anyone else had any ideas. thank you
After flashing a lot of samsung phone, I think the best way to reflash is Odin. Try to download the firmware you want and flash it with Odin. And then, reboot. This always save my phones.
For your recovery, have you tried to update your phone with OTA ? The download may be incomplete and make a soft brick.
Sorry for bad english I'm french.
Thanks for the reply. ya thats what I am going to try. There are a ton firmwares based on country and I am trying to figure out which one I need. It is not my phone so I am not sure if he tried to do an ota, but I think thats probably what happened. Tried to do an ota, phone ran poorly, hard rebooted, and finally resulted in a softbrick. I think that may be why the recovery boot keeps saying installing update as well. Also your English was not bad at all.
Great, let me know if that solution solve your problem.
If it don't, it should not but it's possible, try with pit file (never had to use it so it's really in case it don't work correctly).
I recently went to unlock my phone via Z3X box, my phone was on 4.3 they said to downgrade to 4.1, I followed the steps using Cygwin Terminal in making a custom firmware, I flashed it via Odin and it passed, however was stuck at the Samsung Logo, no usally in this case I would boot into recovery and wipe data and cache, however my Home Button does not work, so I used my Jig to force in to download mode and flashed stock I747m 4.3, went to boot and same thing stuck at the Samsung logo???? any ideas what's wrong here???
mza2k9 said:
I recently went to unlock my phone via Z3X box, my phone was on 4.3 they said to downgrade to 4.1, I followed the steps using Cygwin Terminal in making a custom firmware, I flashed it via Odin and it passed, however was stuck at the Samsung Logo, no usally in this case I would boot into recovery and wipe data and cache, however my Home Button does not work, so I used my Jig to force in to download mode and flashed stock I747m 4.3, went to boot and same thing stuck at the Samsung logo???? any ideas what's wrong here???
Click to expand...
Click to collapse
Tried to factory reset after the 4.3 upgrade? Sounds like you might have borked your EFS partition with the z3x box, if a reset doesn't help...
http://forum.xda-developers.com/showthread.php?t=2471421
Some info from there might be helpful if you are still stuck. I know it is for the Note 3, but many of the same ideas apply, though the mount points are most likely different thus you can't just copy and paste those commands and hope it works (might even make it worse if the partitions are that different).
Is the Home button broken or just stopped working after trying to do this stuff?
Yeah the Home button just doesn't work when you press it that's why I needed the Jig to get in to Download Mode, and the phone was fine after trying with Z3X box it didn't do anything with Samsung tools because I was on 4.3 it started when I created that custom firmware and flashed it, haven't been able to get it to boot since that even with Stock Firmware..
Think you might need to check out this thread then:
http://forum.xda-developers.com/showthread.php?t=2549068
Sounds like an issue with the downgrade / bootloader deal. No Home button sounds like it might really cause some issues here though. Owning a repair shop, I'm pretty familiar with the S3 construction and it's pretty rare that the Home button stops working. Has it been repaired or gotten wet or something?
the phone was water damaged I just replaced the main board with a new one and the phone was fine minus the Home Button, and I have tried the SD card thing about 3 times now and it doesn't do anything???
Hello all,
A friend of mine has a galaxy note 2 from AT&T. I'm not clear as to what exactly he did but he says he had it unlocked and had custom firmware on his phone and the phone did an update on its own and locked up, but by looking up on the Internet all signs point to a soft brick. The phone only turns on and displays firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. My dumb as volunteered to help him as I thought how hard could this be? Anyway Kies failed to help. Secondly I followed the instructions on here as far as downloading Odin, downloaded stock firmware, downloaded Samsung drivers. I plug it in a all appears good in Odin. Mp5 file checks OK and once it starts running there is even a progress bar on the phone showing its downloading but once it gets to the end it fails every time. The screen on the phone displays
Odin Mode
Product name sgh-I317
Current Binary Samsung official
Current status: custom
Knox warranty void: 1
RP SWREV: A3
SW REV: invalid magic string
Any help would be appreciate I've almost had it with attempting to help. He apparently didn't know what he was doing now I obviously don't know what I'm doing.
Thatguycurt said:
Hello all,
A friend of mine has a galaxy note 2 from AT&T. I'm not clear as to what exactly he did but he says he had it unlocked and had custom firmware on his phone and the phone did an update on its own and locked up, but by looking up on the Internet all signs point to a soft brick. The phone only turns on and displays firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. My dumb as volunteered to help him as I thought how hard could this be? Anyway Kies failed to help. Secondly I followed the instructions on here as far as downloading Odin, downloaded stock firmware, downloaded Samsung drivers. I plug it in a all appears good in Odin. Mp5 file checks OK and once it starts running there is even a progress bar on the phone showing its downloading but once it gets to the end it fails every time. The screen on the phone displays
Odin Mode
Product name sgh-I317
Current Binary Samsung official
Current status: custom
Knox warranty void: 1
RP SWREV: A3
SW REV: invalid magic string
Any help would be appreciate I've almost had it with attempting to help. He apparently didn't know what he was doing now I obviously don't know what I'm doing.
Click to expand...
Click to collapse
Sounds like you are trying to install a version of the firmware that is older than the one that was on there. What is the build version that you are trying? What step is it failing at in Odin? I'd recommend getting the newest version of 4.4.2 to avoid the risk of trying to downgrade.
Odin fails right at the end. I see a green progress bar on the phone as well as on my pc screen. I'm at work right now so I'm not too sure as to exactly what or where it fails. What firmware do you recommend I attempt to place on it? Thanks for your reply also, I appreciate it.
Thatguycurt said:
Odin fails right at the end. I see a green progress bar on the phone as well as on my pc screen. I'm at work right now so I'm not too sure as to exactly what or where it fails. What firmware do you recommend I attempt to place on it? Thanks for your reply also, I appreciate it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal.../rom-att-i317-ucucne5-mj4-stock-odex-t2802189
es0tericcha0s said:
http://forum.xda-developers.com/gal.../rom-att-i317-ucucne5-mj4-stock-odex-t2802189
Click to expand...
Click to collapse
Which one do I pick?
Ok...update....
After using Odin to put this firmware on AT&T UCUCNE5 i317 Stock ODIN Note 2 the phone actually rebooted when finished and seemed like everything was normal. However it shows Samsung Keyboard has unfortunately stopped working every ten to fifteen seconds and will not stop. I tried clearing data and cache of the Samsung keyboard app and that did not work. I tried factory and data reset of the phone as well as wipe partition cache and none of that worked. Any suggestions?? I couldn't do anything so I
managed to use a Bluetooth keyboard to go to play store and download new keyboard app but I'm using my google account for that and I personally don't want him having my account on his phone.
I apologize for all the troubles, I'm trying to help him out and didn't realize I was in over my head with no experience on this.
Thatguycurt said:
Ok...update....
After using Odin to put this firmware on AT&T UCUCNE5 i317 Stock ODIN Note 2 the phone actually rebooted when finished and seemed like everything was normal. However it shows Samsung Keyboard has unfortunately stopped working every ten to fifteen seconds and will not stop. I tried clearing data and cache of the Samsung keyboard app and that did not work. I tried factory and data reset of the phone as well as wipe partition cache and none of that worked. Any suggestions?? I couldn't do anything so I
managed to use a Bluetooth keyboard to go to play store and download new keyboard app but I'm using my google account for that and I personally don't want him having my account on his phone.
I apologize for all the troubles, I'm trying to help him out and didn't realize I was in over my head with no experience on this.
Click to expand...
Click to collapse
You'll need to install a custom recovery, use that to wipe the system partition and data reset again then immediately reboot to Download Mode and reinstall the NE5 update.
You sir have been very helpful and I can't thank you enough. I was clueless coming into this thinking I could help my friend effortlessly but that was not the case. I've never had the intentions of rooting a phone or placing a custom mod on one but honestly now I'd like to try it lol!! With your help and this website I was able to fix his phone. I can't thank you guys enough. You're awesome!!!
This will save you 8-12 hours of your time if you are lucky. This means that it also includes the meaningful links of 8-12 hours of searching. Sentences in italic are important. 1 link is for the Odin official website, the rest are re-links back into XDA.
The device in question is a SM-925T Tmobile S6 Edge.
The problem was this. I rooted my phone and messed around with Greenify and the Play store. To prepare for rooting, I allowed unknown downloads, unlocked the bootloader, and turned my security lock off (I had set it to a finger print lock). After I was done rooting, I immediately locked the bootloader again(<--A mistake that caused my bootloop/ soft-brick). After I was finished messing with the above apps (Greenify, etc), I wanted my phone to restart. So I held the Power button and selected restart, while I was on the lock screen (may not be important). I noticed that it took a long time to restart, and upon closer examination, I noticed another error under the "kernel is not seandroid enforcing" (which appears to be natural for rooted phones). The error was "Custom Binary blocked by FRP Lock". It was a new error. I investigated this new problem using the internet , and this dude was panicking like hell, but he didn't appear to fix his problem. He did hint that returning to the bootloader to its locked state was a mistake. Looked a bit more and this guy pointed to another thread, which introduced me to flashing and more importantly his fix, which was to flash the stock 5.1.1 image through odin. He used this link, which contains all the stock firmware for the majority of the new Samsung S6 and S6 edge versions. To make a long story short, most of these fixes involved flashing your firmware to the stock version. So I went to the Odin Website, and downloaded every version, as a couple threads have said that different versions worked for them. Here is a thread with everything you need for Odin. Now, after sorting through and finding micro USB cables that are detectable by Odin, an important step because Odin might develop a pattern of detecting then failing to detect your device through that cable, and testing all the usb 2.0 ports, I was ready, and had Odin with my stock firmware. Odin kept saying "NAND Write", then in the next line "FAIL". This was annoying as Odin wouldn't detect my device again unless I unplugged it, restarted it to download mode, then restarted Odin before plugging it back in. I got confused and found links for somehow fixing the .tar files, stock roms, .pit files (DO NOT MESS AROUND WITHOUT KNOWING WHAT THOSE THINGS DO), and other threads/websites that say to boot into recovery mode , factory reset, then wipe your cache. I could only do that once. After me messing around with all of the above file variants and supposed fixes to help with my issue, I couldn't boot into recovery mode, it got stuck on the "Samsung Galaxy S6 Edge" logo. It did not fix the NAND write failing. There however, are a lot of websites allowing you to download stock software for your phones, and I don't think I can link them as it might break a rule. Surprisingly, some have claimed that using a stock file for another device worked to fix their problem. This thread, which convinced me to use Smart Switch when it failed for everyone else, was very useful, although I recommend downloading Smart Switch from the official website of Samsung. None of the Odin flashing had worked so far, including the Roms and .pit files so I tried Smart Switch. I opened it, and upon selecting the "more" tab on the upper right corner, a bunch of tabs drop down. One should be "Emergency Software recovery and initialization". I had to find my S / N (Serial) number, and I was very confused on how to obtain that number as I was locked out. But to obtain it, do the same process to boot into download (hold volume down, home key, and power key), but stay on the prompt and don't go to the screen that has the word download in the middle. Don't do anything other then reaching the prompt confirming if you want to install a custom ROM. Then, press the home key and it should show your S / N number along with your IMEI number. Once I imputed the code I saw on my phone into Smart Switch, it told me to connect the device. Now, by this time, I realized that Odin only detects my device if it is actually in the download screen. Why shouldn't my computer? I booted into Download on my phone and followed the steps on my computer, making sure that the computer can recognize my phone while it is using a valid USB port and Cable. And after some waiting, for me, my problem was fixed and I could use my phone again, it reverted to it's out-of-box state. I hope this drawn out but very specific explanation helps you guys. It's my first post And also, this thread confirms that you can use a USB hub for flashing(at least for ROMS), Smart Switch, and for rooting.
Thank you for this detailed account, however nothing of the above has worked for me. Odin won't flash the firmware of 5.0.2 (and I tried 5.1.1) and Smart switch does not recognize the device to do anything. BTW phone has been rooted for months and last night decided to turn on its FRP lock randomly and now I'm stuck. Any help would be greatly appreciated.
Explain throughly what you have tried. Especially different ports, cables, and computers. Did you have the right device drivers? Did you do anything else?
I followed your footsteps and and the step where it has to show me the S/No and IMEI, it only shows IMEI number. I am unable to find the S/NO any suggestions?
Xalmey said:
I followed your footsteps and and the step where it has to show me the S/No and IMEI, it only shows IMEI number. I am unable to find the S/NO any suggestions?
Click to expand...
Click to collapse
press vol down home keys and power key once you get to the first blue screen release vol and power keep holdind home but I already tried smart swich didn't help
5.1.1 has FRP lock auto turned on whenever you have a google account on the device... This is probably going to cause a lot of problems with all newer devices that get rooted. I even tried removing all google accounts, flashed recovery and flashed boot img back to stock after rooting and still FRP was bricking the device. I got supersu onto the device, all working fine for a 3rd time, as soon as I added a google account onto my device and restarted, it was FRP lock blocked and soft bricked again.... I used kies to restore to factory again, re-rooted it for the 4th time when I finally discovered an option in developer options called OEM unlock, Turning OEM unlock on turns off the FRP lock security feature.
My conclusion, If your going to root 5.1.1 make sure you remove all accounts from the device first, do not change google passwords for 72 hours prior to rooting, once rooted, YOU MUST TURN OEM Unlock ON in settings>developer options before adding any google accounts to the device.
Hi everyone!
I also got a Samsung S6 Edge + from a friend with custom binary blocked by FRP. I don't know what he was planning to do but I guess it was rooting.
He said he want me to backup any files before I try anything. Don't know how to proceed. But as suggestion, I want to ask if using "fastboot oem unlock" command would fix that.
EsperaKing said:
Hi everyone!
I also got a Samsung S6 Edge + from a friend with custom binary blocked by FRP. I don't know what he was planning to do but I guess it was rooting.
He said he want me to backup any files before I try anything. Don't know how to proceed. But as suggestion, I want to ask if using "fastboot oem unlock" command would fix that.
Click to expand...
Click to collapse
I'm pretty sure fastboot isn't for Samsung devices. Hard to back up any files u less you can get into TWRP or the phone. If you flash stock firmware is highly likely the files will be wiped
callumbr1 said:
I'm pretty sure fastboot isn't for Samsung devices. Hard to back up any files u less you can get into TWRP or the phone. If you flash stock firmware is highly likely the files will be wiped
Click to expand...
Click to collapse
There is no TWRP recovery on the phone. Yeah you're right about backing up files. I don't even know how to proceed and I can tell you I have huge experience on that stuff, rooting flashing custom recoveries and roms, etc... but in this case, I can't say if files can be backed up.
EsperaKing said:
There is no TWRP recovery on the phone. Yeah you're right about backing up files. I don't even know how to proceed and I can tell you I have huge experience on that stuff, rooting flashing custom recoveries and roms, etc... but in this case, I can't say if files can be backed up.
Click to expand...
Click to collapse
The only way is to 're flash the exact same firmware he is currently using now using the 5 files firmware package. But yo ensure csc_home is used so the data will not be wiped.
callumbr1 said:
The only way is to 're flash the exact same firmware he is currently using now using the 5 files firmware package. But yo ensure csc_home is used so the data will not be wiped.
Click to expand...
Click to collapse
Thank you for you reply.
Please can you tell me where I can find such software or how to do it clearly! I know how to use Odin but I don't know how to exclude user_data to be wiped. Thank you
Bonafid3 said:
5.1.1 has FRP lock auto turned on whenever you have a google account on the device... This is probably going to cause a lot of problems with all newer devices that get rooted. I even tried removing all google accounts, flashed recovery and flashed boot img back to stock after rooting and still FRP was bricking the device. I got supersu onto the device, all working fine for a 3rd time, as soon as I added a google account onto my device and restarted, it was FRP lock blocked and soft bricked again.... I used kies to restore to factory again, re-rooted it for the 4th time when I finally discovered an option in developer options called OEM unlock, Turning OEM unlock on turns off the FRP lock security feature.
My conclusion, If your going to root 5.1.1 make sure you remove all accounts from the device first, do not change google passwords for 72 hours prior to rooting, once rooted, YOU MUST TURN OEM Unlock ON in settings>developer options before adding any google accounts to the device.
Click to expand...
Click to collapse
Thank you thank you thank you!!! This is exactly what I was looking for I had just rooted my note 4 running 6.0.1 and had no idea what the oem option was as no rooting method talked about it at all so naturally as soon as i added my Google account phone restarted and locked up.
Kies was the answer I needed as frp lock was active in download mode and my factory reset in recovery failed everytime but running Kies firmware upgrade and entering my model and serial number it installed perfectly in download mode with frp lock still active saved me alot of hassle ?
Hey Guys I'm new to this forum and apologies if this has been covered and would be grateful if someone to point me to the right direction. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
So just briefly the problem at hand : I did an update to 6.0.1 and after this update my fone screen motion sensor stop working, didnt switch when i turn the fone side ways and also the games with motion requirement didnt work. So just recently there was an heartstone(Blizzard game update) I did the update the fone was working fine till i manually did a restart, thats when my s5 g906s went into bootloop. with a little distortion on the bottom right hand corner. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
1.)I've already tried to restore it with kies3 manually added the S/N and IMEI it completes but same bootloop with a little distortion on the bottom right hand corner.
2.)I tried to go into recovery mode by pressing Power+Home+Volume Up but it wont enter that mode.
3.)I tried to Use Odin with the fone variant with full AP,BL,CP,CSC and pit ODIN loads all files and give me a PASS message but after this when the fone restarts it tries to go into recovering mode(top lefthand in blue) but it just turns off with a vibrate. Link - drive.google.com/file/d/0BwqxONwTQDjiVHV2RGxrSVRRNU0/view?usp=sharing
4.) So i though the recovery is faulty so i tried to flash a recovery unofficial_philz_touch_6.48.4-g906s_hsk.tar but i get this error
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
After this i read some threads saying I need root so i tried to flash from autoroot_chainfire_eu but same <ID:0/005> FAIL! (Auth) error.
Now im just stuck, what am i doing wrong? Please if someone can help me out a little would mean a great deal, thanks.
Create an account on Sammobile to get the firmware.
Use the Search to find the required firmware – enter your Galaxy S5 model number which you can find in Settings > More > About Device > Build Number.
Download the correct stock Android firmware file that matches with your SGS5 model.
Extract the contents of zip file and you would find a .tar.md5 file.
Also, download Odin 3.09 from here. Extract and save the files on your PC.
How to unbrick Samsung Galaxy S5:
Turn your Samsung Galaxy S5 off, remove battery and re-insert after some ten seconds.
Boot Galaxy S5 in Download Mode.
Launch Odin on your computer and connect your Galaxy S5 to PC using a USB cable.
Once successfully connected, click on the AP button on Odin.
Locate the .tar.md5 stock Android firmware file extracted earlier.
Don’t touch any other settings except ensuring that Re-partitioning is disabled.
Click on the START button to initiate the process.
After the flashing process is finished successfully, it will reboot and you will be able to set it up with your Gmail account
Dont forget to install phone drivers and use stock USB
Nirman Bhullar said:
Create an account on Sammobile to get the firmware.
Use the Search to find the required firmware – enter your Galaxy S5 model number which you can find in Settings > More > About Device > Build Number.
Download the correct stock Android firmware file that matches with your SGS5 model.
Extract the contents of zip file and you would find a .tar.md5 file.
Also, download Odin 3.09 from here. Extract and save the files on your PC.
How to unbrick Samsung Galaxy S5:
Turn your Samsung Galaxy S5 off, remove battery and re-insert after some ten seconds.
Boot Galaxy S5 in Download Mode.
Launch Odin on your computer and connect your Galaxy S5 to PC using a USB cable.
Once successfully connected, click on the AP button on Odin.
Locate the .tar.md5 stock Android firmware file extracted earlier.
Don’t touch any other settings except ensuring that Re-partitioning is disabled.
Click on the START button to initiate the process.
After the flashing process is finished successfully, it will reboot and you will be able to set it up with your Gmail account
Dont forget to install phone drivers and use stock USB
Click to expand...
Click to collapse
Ah, you beat me to it. Also OP, don't forget to boot into recovery and wipe the data otherwise you'll be stuck in another bootloop, I don't know why but I have to do this on all devices when flashing stock ROM.
RAZERZDAHACKER said:
Ah, you beat me to it. Also OP, don't forget to boot into recovery and wipe the data otherwise you'll be stuck in another bootloop, I don't know why but I have to do this on all devices when flashing stock ROM.
Click to expand...
Click to collapse
Actually I am not a pro but I think Odin do itself
perplexior said:
Hey Guys I'm new to this forum and apologies if this has been covered and would be grateful if someone to point me to the right direction. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
So just briefly the problem at hand : I did an update to 6.0.1 and after this update my fone screen motion sensor stop working, didnt switch when i turn the fone side ways and also the games with motion requirement didnt work. So just recently there was an heartstone(Blizzard game update) I did the update the fone was working fine till i manually did a restart, thats when my s5 g906s went into bootloop. with a little distortion on the bottom right hand corner. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
1.)I've already tried to restore it with kies3 manually added the S/N and IMEI it completes but same bootloop with a little distortion on the bottom right hand corner.
2.)I tried to go into recovery mode by pressing Power+Home+Volume Up but it wont enter that mode.
3.)I tried to Use Odin with the fone variant with full AP,BL,CP,CSC and pit ODIN loads all files and give me a PASS message but after this when the fone restarts it tries to go into recovering mode(top lefthand in blue) but it just turns off with a vibrate. Link - drive.google.com/file/d/0BwqxONwTQDjiVHV2RGxrSVRRNU0/view?usp=sharing
4.) So i though the recovery is faulty so i tried to flash a recovery unofficial_philz_touch_6.48.4-g906s_hsk.tar but i get this error
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
After this i read some threads saying I need root so i tried to flash from autoroot_chainfire_eu but same <ID:0/005> FAIL! (Auth) error.
Now im just stuck, what am i doing wrong? Please if someone can help me out a little would mean a great deal, thanks.
Click to expand...
Click to collapse
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
it sound like the recovery image is corrupted, try SmartSwitch, is a tool from Samsung. Use Emergency software recovery n Initialisation
akrambasyari said:
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
Click to expand...
Click to collapse
@akrambasyari
dear do u have the below mentioned firmware file? If u have, then kindly do share with me. I am facing too much trouble in downloading it from Sammobile.
File (PDA G906SKSU1CPL1 | build: 2017-01-03)
akrambasyari said:
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
Click to expand...
Click to collapse
Please check your pm box and see if the link helps you.
---------- Post added at 09:57 PM ---------- Previous post was at 09:55 PM ----------
ali.akbar01 said:
@akrambasyari
dear do u have the below mentioned firmware file? If u have, then kindly do share with me. I am facing too much trouble in downloading it from Sammobile.
File (PDA G906SKSU1CPL1 | build: 2017-01-03)
Click to expand...
Click to collapse
Please check your pm box. See if the link helps you.
I have a similar problem with my Sm-G906S too......
--------Post deleted as I have posted the solution I found on the following thread.------------
https://forum.xda-developers.com/ga...ner-thread-t2807639/post77083953#post77083953