Hey Guys I'm new to this forum and apologies if this has been covered and would be grateful if someone to point me to the right direction. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
So just briefly the problem at hand : I did an update to 6.0.1 and after this update my fone screen motion sensor stop working, didnt switch when i turn the fone side ways and also the games with motion requirement didnt work. So just recently there was an heartstone(Blizzard game update) I did the update the fone was working fine till i manually did a restart, thats when my s5 g906s went into bootloop. with a little distortion on the bottom right hand corner. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
1.)I've already tried to restore it with kies3 manually added the S/N and IMEI it completes but same bootloop with a little distortion on the bottom right hand corner.
2.)I tried to go into recovery mode by pressing Power+Home+Volume Up but it wont enter that mode.
3.)I tried to Use Odin with the fone variant with full AP,BL,CP,CSC and pit ODIN loads all files and give me a PASS message but after this when the fone restarts it tries to go into recovering mode(top lefthand in blue) but it just turns off with a vibrate. Link - drive.google.com/file/d/0BwqxONwTQDjiVHV2RGxrSVRRNU0/view?usp=sharing
4.) So i though the recovery is faulty so i tried to flash a recovery unofficial_philz_touch_6.48.4-g906s_hsk.tar but i get this error
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
After this i read some threads saying I need root so i tried to flash from autoroot_chainfire_eu but same <ID:0/005> FAIL! (Auth) error.
Now im just stuck, what am i doing wrong? Please if someone can help me out a little would mean a great deal, thanks.
Create an account on Sammobile to get the firmware.
Use the Search to find the required firmware – enter your Galaxy S5 model number which you can find in Settings > More > About Device > Build Number.
Download the correct stock Android firmware file that matches with your SGS5 model.
Extract the contents of zip file and you would find a .tar.md5 file.
Also, download Odin 3.09 from here. Extract and save the files on your PC.
How to unbrick Samsung Galaxy S5:
Turn your Samsung Galaxy S5 off, remove battery and re-insert after some ten seconds.
Boot Galaxy S5 in Download Mode.
Launch Odin on your computer and connect your Galaxy S5 to PC using a USB cable.
Once successfully connected, click on the AP button on Odin.
Locate the .tar.md5 stock Android firmware file extracted earlier.
Don’t touch any other settings except ensuring that Re-partitioning is disabled.
Click on the START button to initiate the process.
After the flashing process is finished successfully, it will reboot and you will be able to set it up with your Gmail account
Dont forget to install phone drivers and use stock USB
Nirman Bhullar said:
Create an account on Sammobile to get the firmware.
Use the Search to find the required firmware – enter your Galaxy S5 model number which you can find in Settings > More > About Device > Build Number.
Download the correct stock Android firmware file that matches with your SGS5 model.
Extract the contents of zip file and you would find a .tar.md5 file.
Also, download Odin 3.09 from here. Extract and save the files on your PC.
How to unbrick Samsung Galaxy S5:
Turn your Samsung Galaxy S5 off, remove battery and re-insert after some ten seconds.
Boot Galaxy S5 in Download Mode.
Launch Odin on your computer and connect your Galaxy S5 to PC using a USB cable.
Once successfully connected, click on the AP button on Odin.
Locate the .tar.md5 stock Android firmware file extracted earlier.
Don’t touch any other settings except ensuring that Re-partitioning is disabled.
Click on the START button to initiate the process.
After the flashing process is finished successfully, it will reboot and you will be able to set it up with your Gmail account
Dont forget to install phone drivers and use stock USB
Click to expand...
Click to collapse
Ah, you beat me to it. Also OP, don't forget to boot into recovery and wipe the data otherwise you'll be stuck in another bootloop, I don't know why but I have to do this on all devices when flashing stock ROM.
RAZERZDAHACKER said:
Ah, you beat me to it. Also OP, don't forget to boot into recovery and wipe the data otherwise you'll be stuck in another bootloop, I don't know why but I have to do this on all devices when flashing stock ROM.
Click to expand...
Click to collapse
Actually I am not a pro but I think Odin do itself
perplexior said:
Hey Guys I'm new to this forum and apologies if this has been covered and would be grateful if someone to point me to the right direction. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
So just briefly the problem at hand : I did an update to 6.0.1 and after this update my fone screen motion sensor stop working, didnt switch when i turn the fone side ways and also the games with motion requirement didnt work. So just recently there was an heartstone(Blizzard game update) I did the update the fone was working fine till i manually did a restart, thats when my s5 g906s went into bootloop. with a little distortion on the bottom right hand corner. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
1.)I've already tried to restore it with kies3 manually added the S/N and IMEI it completes but same bootloop with a little distortion on the bottom right hand corner.
2.)I tried to go into recovery mode by pressing Power+Home+Volume Up but it wont enter that mode.
3.)I tried to Use Odin with the fone variant with full AP,BL,CP,CSC and pit ODIN loads all files and give me a PASS message but after this when the fone restarts it tries to go into recovering mode(top lefthand in blue) but it just turns off with a vibrate. Link - drive.google.com/file/d/0BwqxONwTQDjiVHV2RGxrSVRRNU0/view?usp=sharing
4.) So i though the recovery is faulty so i tried to flash a recovery unofficial_philz_touch_6.48.4-g906s_hsk.tar but i get this error
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
After this i read some threads saying I need root so i tried to flash from autoroot_chainfire_eu but same <ID:0/005> FAIL! (Auth) error.
Now im just stuck, what am i doing wrong? Please if someone can help me out a little would mean a great deal, thanks.
Click to expand...
Click to collapse
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
it sound like the recovery image is corrupted, try SmartSwitch, is a tool from Samsung. Use Emergency software recovery n Initialisation
akrambasyari said:
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
Click to expand...
Click to collapse
@akrambasyari
dear do u have the below mentioned firmware file? If u have, then kindly do share with me. I am facing too much trouble in downloading it from Sammobile.
File (PDA G906SKSU1CPL1 | build: 2017-01-03)
akrambasyari said:
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
Click to expand...
Click to collapse
Please check your pm box and see if the link helps you.
---------- Post added at 09:57 PM ---------- Previous post was at 09:55 PM ----------
ali.akbar01 said:
@akrambasyari
dear do u have the below mentioned firmware file? If u have, then kindly do share with me. I am facing too much trouble in downloading it from Sammobile.
File (PDA G906SKSU1CPL1 | build: 2017-01-03)
Click to expand...
Click to collapse
Please check your pm box. See if the link helps you.
I have a similar problem with my Sm-G906S too......
--------Post deleted as I have posted the solution I found on the following thread.------------
https://forum.xda-developers.com/ga...ner-thread-t2807639/post77083953#post77083953
Related
Hello ppl,
i got a big problem, i hope someone can help me.
A friend of mine, gave me his galaxy s 2 to fix it. It just showed the battery icon with a circle running into it.
I fixed it with the JIG and got into download mode.
Everything is fine until now, even the flash with Odin shows success, but the phone just wont start up.
It doesnt matter what i do, or flash, its stuck in the samsung galaxy s II screen.
Download Mode is working, but Recovery not. When i try to enter the recovery mode, the phone hangs with the same screen like above.
Is there anything i could try to fix this?
Thank you
geminga
Okay relax, as you can get into download mode, there's a chance that you can still fix it.
I think you're running the wrong kernel or modem here.
I advice you to freshly install a new rom, and then install a CF-Rooted kernel that allows you to get back into recovery.
Once you got that worked out, get into recovery and select Wipe/factory reset. It should boot now.
If this still does not solve your problem, install VillainRom 2.0 using the process described in the thread. I had the bootloop problem too, but Wiping, Flashing and Wiping again did the trick for me.
Thank you mate I will try this later. Im will report if I was successful. (i hope so)
I flashed 2.3.4 ROM with Odin and then CF-Recovery but i can still not access recovery mode. It shows the yellow triangel but still hangs with the samsung galaxy screen.
I think that phone has become a nice paperweight...
As 2.3.4 is a test release i would try older stable firmware .
Flash a stock 2,3,3 rom via Odin and see if it boots .
jje
Is there something for Samsung that completely replaces everything including ROM,recovery and such things?
From my desire I know, if a RUU can't boot your phone it is 100% bricked. So I need something like that for that sgs2, to be sure that this is no hardware failure...
I will try some flashes and report after that.
Sent from my HTC Pyramid using XDA App
what i would do is install one of these carrier branded ROMs http://forum.xda-developers.com/showthread.php?t=1113928
and see if it boots, if it does then flash the cfroot [specific to the carrier version you choose e.g. KF2] make sure thats the right one. that should give you recovery as prodygee has said. then do a full wipe, system, data, cache, dalvik and reboot.
afaik this should work. that's worked for me on numerous bootloops!
Hope this helps, Rumble
solved [Arrow Galaxy s 2 wont start]
i just followed this link... >>1.Make sure that your phone is Samsung Galaxy S2 not any other.If you try this process on any other phone then the phone will be damaged.
2.Create a backup of your all useful phone data with the help of backup apps that ensure your phone data.
3.This process will take several minutes or may be hours so make sure that your phone battery consumption is maximum.
4.Remove the SIM card and external storage SD card.
5.Download both these files.
Download Gingerbread 2.3.4 XXKGI Firmware
Odin3 v 1.83
Procedure for Update Samsung Galaxy S2 GT I9100 to Gingerbread XXKG1 2.3.4 Firmware.
1. Open the Odin.exe file you will see the window image on your screen.
2. Switch off your phone then press and hold the Volume Button with the Power Key and HOME to turn the phone into the download mode.
3. Now connect your phone via USB cable to the computer. After connectivity you will see the window screen in which you see the COM ID 5 as a yellow color.
4. Now add the following files in the corresponding options:
PIT – u1_02_20110310_emmc_EXT4.pit
PDA – CODE_I9100XXKG1_CL349526_REV02_user_low_ship.tar
Phone – MODEM_I9100XXKG1_REV_02_CL1034110.tar
CSC- GT-I9100-CSC-MULTI-OXAKG1.tar
5. Click on the "Start button". Then updation process is start and wait for some time.Please don't interrupt your device will installation.
6. When the installation is completed reboot your phone and remove cable connectivity.The previous version of this firmware is also stored in cache memory.Remove your previous firmware version by dialing*2767*3855#.Now Update and check the latest version by dialing *#1234#.
it worked perfectly for me
This is not a tutorial, I will not explain how android works or how to flash or how to root. I just want to explain what I did to get my S6 Edge SM-G925X working as a WiFi Phablet.
I'm not responsible when you do something wrong to your device and brick it!
Don't ask for fully functionality - the radio parts on the board are missing and so you will not get mobile calls or sms texts or 2G/3G/4G data connection.
Yesterday I got a S6 Edge LDU (SM-G925X) but was not able to really turn off the retail mode software (even with the right passwords found by google). PingPong root didn't work and CF-auto-root I didn't want to use because of tripping the knox flag (it would not really matter but I didn't want to)
So I decided to replace the ROM with a regular S6 Edge stock rom.
I went to sammobile and downloaded the oldest available German stock firmware for the SM-G925F since I'm from Germany. This version: G925FXXU1AOE3_G925FDBT1AODO_DBT.zip
I took the oldest one since I wanted to try PingPong root later again.
I suppose any other firmware should work as well but when it is to new, PingPong root will fail.
The *.tar.md5 file I renamed to *.tar and removed ALL files inside except these five:
boot.img
cache.img
hidden.img
recovery.img
system.img
I flashed the .tar file with ODIN 3.10.6 (3.9 or 3.10 didn't work).
After that I had a S6 Edge without any retail mode software
Then I used PingPong root to root the device and now I have all options and no annoying retail mode. Fingerprint sensor works good else I tested nothing until now.
Now I enjoy my new cool Phablet device but I'm not really sure whether I love the edges or not
I recommend you to turn on flight mode to save energy since the LDU has no radio hardware but the ROM is for regular S6 Edge and tries to connect to mobile network permanently. You can still use WiFi, NFC, Bluetooth.
Don't ask me to upload this or that or to explain it step by step. You should know what to do from what I wrote here ore leave your device alone! (sorry noobs)
deleted
mielletseed said:
This is not a tutorial, I will not explain how android works or how to flash or how to root. I just want to explain what I did to get my S6 Edge SM-G925X working as a WiFi Phablet.
I'm not responsible when you do something wrong to your device and brick it!
Don't ask for fully functionality - the radio parts on the board are missing and so you will not get mobile calls or sms texts or 2G/3G/4G data connection.
Yesterday I got a S6 Edge LDU (SM-G925X) but was not able to really turn off the retail mode software (even with the right passwords found by google). PingPong root didn't work and CF-auto-root I didn't want to use because of tripping the knox flag (it would not really matter but I didn't want to)
So I decided to replace the ROM with a regular S6 Edge stock rom.
I went to sammobile and downloaded the oldest available German stock firmware for the SM-G925F since I'm from Germany. This version: G925FXXU1AOE3_G925FDBT1AODO_DBT.zip
I took the oldest one since I wanted to try PingPong root later again.
I suppose any other firmware should work as well but when it is to new, PingPong root will fail.
The *.tar.md5 file I renamed to *.tar and removed ALL files inside except these five:
boot.img
cache.img
hidden.img
recovery.img
system.img
I flashed the .tar file with ODIN 3.10.6 (3.9 or 3.10 didn't work).
After that I had a S6 Edge without any retail mode software
Then I used PingPong root to root the device and now I have all options and no annoying retail mode. Fingerprint sensor works good else I tested nothing until now.
Now I enjoy my new cool Phablet device but I'm not really sure whether I love the edges or not
I recommend you to turn on flight mode to save energy since the LDU has no radio hardware but the ROM is for regular S6 Edge and tries to connect to mobile network permanently. You can still use WiFi, NFC, Bluetooth.
Don't ask me to upload this or that or to explain it step by step. You should know what to do from what I wrote here ore leave your device alone! (sorry noobs)
Click to expand...
Click to collapse
Thanks for the tutorial [emoji6]. Works great on my Edge LDU
Verstuurd vanaf mijn SM-G920F met Tapatalk
How did you delete the files from the .tar
ANKLES said:
How did you delete the files from the .tar
Click to expand...
Click to collapse
I created a new tar file with 7zip
Verstuurd vanaf mijn SM-G920F met Tapatalk
I tried the same thing but I keep getting failures in odin
ANKLES said:
I tried the same thing but I keep getting failures in odin
Click to expand...
Click to collapse
Same here. I'm getting the "complete(write) operation failed" error.
Anyone could help? tried different things suggested on the internet, sadly none of them worked.
Try to delete *.bin files right in tar archive with Total Commander. It has full-featured trial and can modify tar without repacking.
I just bought a S6 Edge LDU (LRX22G.G925XXXU1AOC6_LLK) off ebay in hope of getting rid of the Samsung Retail Mode and using it as a wifi device. I followed instruction that I can find on XDA, but mission has not been successful so far. Here's what I have done.
1. Trying to disable Samsung Retail Mode but failed. Password 5444 or any other passwords that I can find just doesn't work, even the menu in Samsung Retail Mode is different: There is no "“Configuration settings”, instead, there is "Store Settings" which asks for password. Without Samsung Retail Mode disabled, the phone can't be restarted nor power off, and the entire Developer Options is greyed out (which means no USB debugging mode, therefore Odin wont work when the phone is on).
2. Flash modified rom for G925F (G925FXXU1AOE3_G925FDBT1AODO_DBT.zip, with cm.bin and sboot.bin removed) succeeded, but the phone stuck at Samsung Logo page with no light on, it also seems the recovery mode is gone, only download mode is still available.
3. I flashed stock recovery for G925F, G925T with Odin. The flash succeeded, but the phone still stuck at Samsung Logo.
4. I tried to fix it with Smart Switch, but after entering model SM-G925X, then the serial found at the back, the program just close it by itself.
Have you disabled Samsung Retail Mode before you flashed the rom for G925F?
This doesn't work on my g925x. I think it's due to the Factory Reset is still locked by Samsung. It will give "MDM does not allow FactoryReset " message when I was trying to wipe data and factory reset via stock recovery. I was able flash a G925f to the unit which changed the baseband version and Build number to G925F, but retail mode is still there and running.
I also can't find a way to disable Samsung Retail Mode. The password 5444 or galaxy just doesn't work.
mielletseed said:
This is not a tutorial, I will not explain how android works or how to flash or how to root. I just want to explain what I did to get my S6 Edge SM-G925X working as a WiFi Phablet.
I'm not responsible when you do something wrong to your device and brick it!
Don't ask for fully functionality - the radio parts on the board are missing and so you will not get mobile calls or sms texts or 2G/3G/4G data connection.
Yesterday I got a S6 Edge LDU (SM-G925X) but was not able to really turn off the retail mode software (even with the right passwords found by google). PingPong root didn't work and CF-auto-root I didn't want to use because of tripping the knox flag (it would not really matter but I didn't want to)
So I decided to replace the ROM with a regular S6 Edge stock rom.
I went to sammobile and downloaded the oldest available German stock firmware for the SM-G925F since I'm from Germany. This version: G925FXXU1AOE3_G925FDBT1AODO_DBT.zip
I took the oldest one since I wanted to try PingPong root later again.
I suppose any other firmware should work as well but when it is to new, PingPong root will fail.
The *.tar.md5 file I renamed to *.tar and removed ALL files inside except these five:
boot.img
cache.img
hidden.img
recovery.img
system.img
I flashed the .tar file with ODIN 3.10.6 (3.9 or 3.10 didn't work).
After that I had a S6 Edge without any retail mode software
Then I used PingPong root to root the device and now I have all options and no annoying retail mode. Fingerprint sensor works good else I tested nothing until now.
Now I enjoy my new cool Phablet device but I'm not really sure whether I love the edges or not
I recommend you to turn on flight mode to save energy since the LDU has no radio hardware but the ROM is for regular S6 Edge and tries to connect to mobile network permanently. You can still use WiFi, NFC, Bluetooth.
Don't ask me to upload this or that or to explain it step by step. You should know what to do from what I wrote here ore leave your device alone! (sorry noobs)
Click to expand...
Click to collapse
Is there a way to root the S6 LDU after this?
shadowcliffs said:
Have you disabled Samsung Retail Mode before you flashed the rom for G925F?
This doesn't work on my g925x. I think it's due to the Factory Reset is still locked by Samsung. It will give "MDM does not allow FactoryReset " message when I was trying to wipe data and factory reset via stock recovery. I was able flash a G925f to the unit which changed the baseband version and Build number to G925F, but retail mode is still there and running.
I also can't find a way to disable Samsung Retail Mode. The password 5444 or galaxy just doesn't work.
Click to expand...
Click to collapse
how are you able to install g925f? i tried to flash base the first thread. Bricked it and now it doesn't boot up. Which version of the firmware for g925f and did you flash similar to the instruction given by OP?
After trial and error I got it. The demo version i had would not work with any of the passwords that i could find online. There were actually 2 part demo software on it. The only thing that i could get odin to flash to my g925x was cf_auto_root then i downloaded root browser from play store. Then i used root browser to manually delete all whole folders and files that had any reference to demo stuff. That pretty well wiped about 99% of it. Security settings still wouldn't let me do a manual restart, power down or do a factory reset. I still could not get odin to flash any other files until the other day when i found these files . https://www.mediafire.com/folder/79cjpyg0s604p/LDU_FIX . I then tried to flash AP and CP files and they both flashed woot woot (they are still the only ones that I can get to flash) upon reboot I could now do a full factory reset, power down, restart, etc... it has been wiped clean Hope this procedure helps. Let me know .
Thanks for that information. I was able to flash the ap and cp but still stuck on the Galaxy s6 edge live demo boot screen. i can't even go to recovery to do a reset. If i understand correctly, it's power+vol up+ home..it would just go directly to the galaxy edge boot screen.
When i use odin to flash ap and cp, it went successful and i was happy thinking that it will actually boot into lollipop. Bummer..
warpcoil said:
After trial and error I got it. The demo version i had would not work with any of the passwords that i could find online. There were actually 2 part demo software on it. The only thing that i could get odin to flash to my g925x was cf_auto_root then i downloaded root browser from play store. Then i used root browser to manually delete all whole folders and files that had any reference to demo stuff. That pretty well wiped about 99% of it. Security settings still wouldn't let me do a manual restart, power down or do a factory reset. I still could not get odin to flash any other files until the other day when i found these files . https://www.mediafire.com/folder/79cjpyg0s604p/LDU_FIX . I then tried to flash AP and CP files and they both flashed woot woot (they are still the only ones that I can get to flash) upon reboot I could now do a full factory reset, power down, restart, etc... it has been wiped clean Hope this procedure helps. Let me know .
Click to expand...
Click to collapse
g35mt said:
Thanks for that information. I was able to flash the ap and cp but still stuck on the Galaxy s6 edge live demo boot screen. i can't even go to recovery to do a reset. If i understand correctly, it's power+vol up+ home..it would just go directly to the galaxy edge boot screen.
When i use odin to flash ap and cp, it went successful and i was happy thinking that it will actually boot into lollipop. Bummer..
Click to expand...
Click to collapse
How long did you wait for it to try to boot ? It takes a while for the first boot after a full flash . Also, did you use cf auto root, if so which one ?
i waited at least 30 minutes. Also i didn't root. Do you mean cf auto boot?
warpcoil said:
How long did you wait for it to try to boot ? It takes a while for the first boot after a full flash . Also, did you use cf auto root, if so which one ?
Click to expand...
Click to collapse
mielletseed said:
This is not a tutorial, I will not explain how android works or how to flash or how to root. I just want to explain what I did to get my S6 Edge SM-G925X working as a WiFi Phablet.
I'm not responsible when you do something wrong to your device and brick it!
Don't ask for fully functionality - the radio parts on the board are missing and so you will not get mobile calls or sms texts or 2G/3G/4G data connection.
Yesterday I got a S6 Edge LDU (SM-G925X) but was not able to really turn off the retail mode software (even with the right passwords found by google). PingPong root didn't work and CF-auto-root I didn't want to use because of tripping the knox flag (it would not really matter but I didn't want to)
So I decided to replace the ROM with a regular S6 Edge stock rom.
I went to sammobile and downloaded the oldest available German stock firmware for the SM-G925F since I'm from Germany. This version: G925FXXU1AOE3_G925FDBT1AODO_DBT.zip
I took the oldest one since I wanted to try PingPong root later again.
I suppose any other firmware should work as well but when it is to new, PingPong root will fail.
The *.tar.md5 file I renamed to *.tar and removed ALL files inside except these five:
boot.img
cache.img
hidden.img
recovery.img
system.img
I flashed the .tar file with ODIN 3.10.6 (3.9 or 3.10 didn't work).
After that I had a S6 Edge without any retail mode software
Then I used PingPong root to root the device and now I have all options and no annoying retail mode. Fingerprint sensor works good else I tested nothing until now.
Now I enjoy my new cool Phablet device but I'm not really sure whether I love the edges or not
I recommend you to turn on flight mode to save energy since the LDU has no radio hardware but the ROM is for regular S6 Edge and tries to connect to mobile network permanently. You can still use WiFi, NFC, Bluetooth.
Don't ask me to upload this or that or to explain it step by step. You should know what to do from what I wrote here ore leave your device alone! (sorry noobs)
Click to expand...
Click to collapse
I tried your way but failed. How else does not? Please help me!!!
g35mt said:
i waited at least 30 minutes. Also i didn't root. Do you mean cf auto boot?
Click to expand...
Click to collapse
Cf_auto_root for 925f http://www.mediafire.com/download/gz05cp6w74vld32/CF-Auto-Root-zerolte-zeroltexx-smg925f.tar.md5
I tried that and also 920t just for the the heck of it..still no go..
This picture attach is where it constantly boot to and stay there. I can't go to recovery but can only access download mode.
warpcoil said:
Cf_auto_root for 925f http://www.mediafire.com/download/gz05cp6w74vld32/CF-Auto-Root-zerolte-zeroltexx-smg925f.tar.md5
Click to expand...
Click to collapse
g35mt said:
I tried that and also 920t just for the the heck of it..still no go..
This picture attach is where it constantly boot to and stay there. I can't go to recovery but can only access download mode.
Click to expand...
Click to collapse
This should help http://www.mediafire.com/download/v2bx6n1gzdyc8n2/G925F_Stock_Recovery_ZiDroid.com.tar.md5
My phone is/was a Samsung S5 Neo (SM-G903M) running Android 5.1.1.
I was trying to root the phone to use Titanium Backup, I got a CF-Auto-Root file and used Odin to load the md5 file. I need this root to backup my phone, so I don't have any backup.
The first time, I followed all the instructions and when it reboot I got a red pirate, bootloader locked and the log:
/sbin/unzip: permission denied
/sbin/chcon: permission denied
Then, I tried another CF-Auto-Root file and now my phone is restarting and can't load (bootloop).
1) Is there a way to extract the cache.img and recovery.img file from a stock rom and use Odin to load them?
2) Is there another way to fix this phone with root or not?
3) My wife was the same phone,is it possible to get some file from her phone and fix mine?
It's probably better to flash whole rom if you got warning for bootloader locked but yeah, you can extract from firmware. Open tar.md5 as archive and extract what you want. Make a new tar with the extracted files and flash with odin.
[Solution]
1) Download a stock rom from: https://www.sammobile.com/firmwares/database/SM-G903M/
2) Untar cache.img and recovery.img
3) Download tar-Tool_Odin3-v3.10.7 from: https://forum.xda-developers.com/showthread.php?t=2446269
4) Unzip and copy cache.img and recovery.img to tar-Tool folder
5) Use the batch.bat to create a tar.md5 file from cache.img and recovery.img
6) Download Odin
7) Follow these instructions:
7.1/ Extract it somewhere and launch it in administrator mode.
7.2/ Put your phone in download mode.
To do it, press & maintain 3 buttons (Menu, volume down & power). Then push "Volume up"
7.3/ Quit Kies. Connect your phone to your PC. Odin will detect it in ID :COM
7.4/ Select "AP" and select the file created by tar-Tool in folder "AllFiles"
7.5/ Verify that only "Auto reboot" & "F-reset" is ticked. Click on Start.
7.6/ Wait till the phone reboots.
Grillox said:
My phone is/was a Samsung S5 Neo (SM-G903M) running Android 5.1.1.
I was trying to root the phone to use Titanium Backup, I got a CF-Auto-Root file and used Odin to load the md5 file. I need this root to backup my phone, so I don't have any backup.
The first time, I followed all the instructions and when it reboot I got a red pirate, bootloader locked and the log:
/sbin/unzip: permission denied
/sbin/chcon: permission denied
Then, I tried another CF-Auto-Root file and now my phone is restarting and can't load (bootloop).
1) Is there a way to extract the cache.img and recovery.img file from a stock rom and use Odin to load them?
2) Is there another way to fix this phone with root or not?
3) My wife was the same phone,is it possible to get some file from her phone and fix mine?
Click to expand...
Click to collapse
In my opinion u need to flash the stock firmware ur mobile was running before the root with odin....u can download from site samsung firmware.You will have to find the exact firmware u were running and your country.thats only way from my opinion.Then try again with autoroot and please download the cf autoroot file only made for lollipop version.I hope u have flashed the correct cf autooot file.
i am very suspicious of my fiance of two years now that she's cheating on me, she has changed passwords to every account that she has, plus put a pin lock on her phone, i have been searching for ways to retrieve her text messages without installing any software on her phone or having access to it, so far i am not having any luck. we have a 19 year history together, plus a beautiful 18 year old daughter & this is eating me up inside. But i finally burst on this page from Google and found the God eye who changed my whole story for good! He help me hack her FB, her emails and her phone number and i got to see all his messages and apps from her phone. only for me to found out she's cheating and have a son out there without my consent but i thank the God eye for letting me know all this and am moving on fine with my life and my daughter. He's also involved in any sort of hacking issues. Hurray!! Get to him on (Godeyeviewhacker AT hotmail DOT com)
thalidomide1111 said:
In my opinion u need to flash the stock firmware ur mobile was running before the root with odin....u can download from site samsung firmware.You will have to find the exact firmware u were running and your country.thats only way from my opinion.Then try again with autoroot and please download the cf autoroot file only made for lollipop version.I hope u have flashed the correct cf autooot file.
Click to expand...
Click to collapse
The solution I wrote solved my problem. And guess what? My phone is rooted.
Gentlemen, I tried flashing cf-auto-root for M variant (firmware is at UBU1BPK1), but after ODIN Pass! it reboots and just show the message "Recovery is not seandroid enforced".
After that, it reboots again to normal firmware, not rooted.
I even tried un-checking the "auto reboot" option in ODIN, and doing a manual reboot to recovery mode (as it was supposed to force the cf-root to install).
But it just repeats the same behaviour. I kept holding vol_up+button+power and it kept rebooting trying to enter recovery but just showing the message "recovery is not seandroid enforced".
At the time I released the buttons, it rebooted to normal firmware, not rooted.
Tried different Odin versions (3.10.6, 3.12...), nothing did the trick.
Any tips? May I have to try the F variant? (my phone is dual sim, don't know if it'd disable second sim slot)
I've also enabled "USB debug" and "unlocked OEM" under developer settings.
Couldn't find "reactivation lock" option under account settings / security settings.
ciberglo said:
Gentlemen, I tried flashing cf-auto-root for M variant (firmware is at UBU1BPK1), but after ODIN Pass! it reboots and just show the message "Recovery is not seandroid enforced".
After that, it reboots again to normal firmware, not rooted.
I even tried un-checking the "auto reboot" option in ODIN, and doing a manual reboot to recovery mode (as it was supposed to force the cf-root to install).
But it just repeats the same behaviour. I kept holding vol_up+button+power and it kept rebooting trying to enter recovery but just showing the message "recovery is not seandroid enforced".
At the time I released the buttons, it rebooted to normal firmware, not rooted.
Tried different Odin versions (3.10.6, 3.12...), nothing did the trick.
Any tips? May I have to try the F variant? (my phone is dual sim, don't know if it'd disable second sim slot)
I've also enabled "USB debug" and "unlocked OEM" under developer settings.
Couldn't find "reactivation lock" option under account settings / security settings.
Click to expand...
Click to collapse
Just to add that I finally got it working.
Flashed a different country variant (BVO - Bolivia), that has BQA1 firmware and also have the same Modem/CP Version as my ZTO (Brazil) in BPF1. I was afraid of choosing a different variant from Brazil with different modem version, and being not able to use my local area signal provider.
It worked like a charm. I wiped data/factory reset. Then I flashed the BQA1 firmware using ODIN 3.12.3 (last version). Logged in google account (didn't logged on samsung account, neither choosed a lock screen).
Then, flashed cf-auto-root from autoroot.chainfire.eu for g903m BQA1 and it worked like a charm!
Genuine Hacker
I really have to thank Kieran for her review I read on veronica's blog. I've been in search of a genuine hacker for a while to help me hack my husband and a website but I was scammed repeatedly by fakes. After reading kiearan's review on black butcher, I thought it was just another lie but when I dug dip and read other reviews, the hacker turned out highly recommended by other people too. I contacted the hacker and decided to have faith in him. The hacker delivered and I was really impressed... he gave me full access to my husband's phone and hacked the website I wanted without any problem. Now I see why everyone is talking about this hacker and I'm going to join the train. For us looking for reliable hacker, you can imagine my joy after being scammed to finally see someone truthful to get it done. His contact is Blackbutcher.hacker at outlook dot com. contact him and stop being scammed by these fakes out there. My sister also tried him to boost her credit score and clear her credit card debt and he delivered so I can guarantee he's real and knows what he's doing. Thank you black butcher.
Hello,
I've recently acquire an used Samsung Galasy S3 (I9300) and since Android 4.3 is quite old I've decided to update the phone. So I've started by rooting the device which have gone well. Then I decided to unlock the bootloader of my phone, and for this i've used the app "EZ Unlock", I clicked on the "unlock" button and then I've reboot my phone. And this is where the problems begins. When I'm booting there is a screen stuck on the device saying : "Downloading... /n Do not turn off target!" without the little white text in the upper left corner. I eventually did managed to install a recovery, the TWRP 3.1.0. But I can't do anything, when I'm trying to flash a ROM from the recovery mode I have an error 7. I also tried to flash the stock firmware via Odin, but it get stuck. Thank you for any help.
Ps : My engliski is bad, i know.
Pss : I'm not stressed by this whole situation as the phone was already quite at the end of his life.
You've probably killed it with that ez-unlock crap..
1. Do you know exactly which variant of the i9300 you have?.
2. Does the stock firmware you're trying to flash match that device/region.
The stock firmware you're trying to flash must be android 4.3. You cannot downgrade once it has been updated to 4.3, the lowest you can go is 4.3.
3. Have you rebooted the device since? What is displayed on the screen right now?.
If you have the international (btu) version I have a stock firmware to flash via odin.
Beamed in by telepathy.
The bootloader on the phone was never locked so, as @shivadow said, the app probably did something to the phone.
What error are you getting in Odin? Post the Odin log and maybe someone can help interpret the results.
You tried using Odin with different USB cables, and USB ports?
Hello and thanks for the replies,
I did finally managed to flash android 7, I just choosed the wrong image. Sorry for my noobness.
Thanks y'all !
Hello XDA im a new user here and i have a little big problem,
So my phone a samsung galaxy s6 edge g925fxxu6erd1. One day it decided to block itself at the samsung logo.So i got odin 3.13.3 and started looking for the firmware, at first i didnt new the full model name of the phone i knew only thats a g925fxxu6 so through trial and error i download 5 diffrent types of g925fxxu6 firmwares.
At first it gaved me write error ok i got another cable. The first 4 stoped at the system installation. The fifth gave me a hidden.img error. I read somewhere that u can get the full model name if u get into recovery mode but that didnt work because it gaved me an infinite system update thing.After that i observed that one of the firmwares had a csc file i flashed it and BOOM it was booting me into recoverymode. THEN i learned my full model name ok i downloaded it try to flash and it just stops everytime at boot.img changing ports check cable is the one that got me through till the hidden.img so check diffrent versions of odin check everything since 3.09 to 3.13.1 .
At this point im tyred and frustrated and i dont want to loose the phone because it was a gift( i didnt try to install or to flash anything like twrp and such before the problem occured i just put it to charg and when i got home it was in this state). Maybe its a hardware issue but idk the phone certenly charges. Can someone help me!
Update: i found m firmware with csc cp and bl for my model.
Velonzy said:
Hello XDA im a new user here and i have a little big problem,
So my phone a samsung galaxy s6 edge g925fxxu6erd1. One day it decided to block itself at the samsung logo.So i got odin 3.13.3 and started looking for the firmware, at first i didnt new the full model name of the phone i knew only thats a g925fxxu6 so through trial and error i download 5 diffrent types of g925fxxu6 firmwares.
At first it gaved me write error ok i got another cable. The first 4 stoped at the system installation. The fifth gave me a hidden.img error. I read somewhere that u can get the full model name if u get into recovery mode but that didnt work because it gaved me an infinite system update thing.After that i observed that one of the firmwares had a csc file i flashed it and BOOM it was booting me into recoverymode. THEN i learned my full model name ok i downloaded it try to flash and it just stops everytime at boot.img changing ports check cable is the one that got me through till the hidden.img so check diffrent versions of odin check everything since 3.09 to 3.13.1 .
At this point im tyred and frustrated and i dont want to loose the phone because it was a gift( i didnt try to install or to flash anything like twrp and such before the problem occured i just put it to charg and when i got home it was in this state). Maybe its a hardware issue but idk the phone certenly charges. Can someone help me!
Update: i found m firmware with csc cp and bl for my model.
Click to expand...
Click to collapse
Who gives a s***t just get the TWRP for your model flash it in AP slot odin get lineageos for your phone model and flash it in TWRP.Boom you have a better cleaner android.The Samsung firmware downloading is a Headache as speed is not good and it sometimes have holes in it.Sometimes you mess things up but With TWRP and lineage you rarely run into problems.I can promise you after Lineage you would love your device.Be sure to Check Gapps for Google apps and Some custom kernels stuff.The speed is great in Lineage along with stability,secuirity,updates and Privacy.
Sent from my Pixel 3 XL using Tapatalk